How exactly do I add this? If I add a images directory to the assets folder it gets deleted....but most examples talk about referring to /assets/images/whatever.jpg to be able to access an image.
How exactly do I get a folder added?
Im using the minimal-mistakes theme (but I doubt that matters)
You should add your directory to the "source root" instead of within the _site folder.
The contents of _site gets recycled every time you run jekyll build or jekyll serve..
Simply add assets/images/whatever.jpg to the root of your site's source and it will be "copied" as is into _site by Jekyll...
Related
I'm a total newbie when it comes to Jekyll, and have encountered a big problem. I'm probably doing something wrong or missing something, but what?
I find it very confusing trying to install the "Agency Jekyll Theme" which is the first theme I'm trying out. Mostly because there are several ways to do it, the commands don't add up and there is a lot of "you can do this" embedded into what you actually have to do to install it.
These are the guides I've been following:
https://jekyllrb.com/docs/step-by-step/01-setup/
https://www.rubydoc.info/gems/jekyll-agency/1.2.0
http://jekyllthemes.org/themes/agency/
Basically, I've tried all the 3 possible ways to install it without success.
I'm running on Windows.
My problem:
jekyll serve (ran in my site folder) creates a _site folder and content in the subfolders css, img and js. Nothing else is created, not index.html, and other files needed directly under _site folder.
In my site root folder, there are only _config.yml and Gemfile, after completing the initial steps.
There seems to be a problem with actually downloading the full theme into my root folder. When I manually download the agency-jekyll-theme-starter-master.zip and extract the entire content in my root site folder, there is index.html, _data folder, etc. However, in the assets folder, there is only an img folder.
As a result, when I open http://localhost:4000/agency-jekyll-theme-starter/ in a browser there is only a directory listing with the folder "assets".
Where do the css folder and its content come from that generates under _site?
My workaround:
I run jekyll build so that the site in its entirety is placed under _site folder. However, with this process, the whole point of using Jekyll is lost because I have to edit the generated HTML files, CSS files, etc. To change simple stuff like renaming the page/navigation "Services" to another word I have to go through the HTML file and replace all occurrences
My successful attempt to reproduce your issue:
I tried this method from http://jekyllthemes.org/themes/agency/
Using the Starter Template
This is the fastest and easiest way to get up and running on GitHub Pages. Simply generate your own repository by clicking here, then replace the sample content with your own and configure for your needs.
The starter template (that is also linked on the page above) allowed me to start a code space and commit the repo content into my new branch.
I could reproduce your problem, there were no styles when running jekyll serve.
The reason for the issue:
The problem is the baseurl in the _config.yml file. It points to a relative path that does not exist in your repository. Your baseurl / path is "", because you run your server from the root folder, most probably both locally and later remotely using GitHub pages.
The solution for the issue:
In the _config.yml file in your repo, change this one line
from
baseurl: "/agency-jekyll-theme-starter" # the subpath of your site, e.g. /blog
to
baseurl: "" # the subpath of your site, e.g. /blog
Check out https://github.com/cadamini/jekyll-agency-test if you like.
I hope this was understandable and helpful and that you can solve your issue with these instructions. Don't hesitate to comment for further clarification.
Im trying to host a github live server for a project that right now has a "index.html" main folder with 4 files inside that main folder named "forgot-pass.html" "home.html" "sign-in.html" "sign-up.html"
I know to host on github your html needs to be a index.html but my question is can you have a folder named index.html with html files inside that folder and it still work? or how can i host on github if i have multiple html files named various things.
Yes you can have more html files in the same folder or subfolders, but it's mandatory to have the "index.html" file. Also I think you can make that folder but will not work (I don't know if it works or not, but give it a shot).
Its required to have a "index.html" file located in the root directory. As far as having a main FOLDER named index.html with files inside of that as-well, did not work for me. but i did not try to have a index.html file in the root directory on its own ALONG with a separate folder containing the rest of the html files. So i don't know if that works or not. i just put all the html files in the root directory and made sure to have one named "index.html"
I followed the instructions for Jekyll Quickstart. Whenever I make changes in my site's directory, the changes get wiped somehow. For example, I modified some of the code in index.html, only to have it return to Jekyll's default. I also created a subdirectory in _site called 'otherservices' with an index.html. That gets wiped as well. Any idea why this may be happening? I can't really use Jekyll if it keeps wiping.
Jekyll is a static website generator, each time it generates a website it place files in the _site folder.
Any changes you make inside the above folder are lost because it is recreated when executing jekyll build or jekyll serve .
Changes should be made to the rest of the files or folders so they will be processed and locate the resulting files inside _site.
You should not write manually into _site directory, that is Jekyll's output.
If you need an otherservices directory in the output, place it one level above, like this:
_site/
otherservices/
index.html
index.md
Jekyll will copy every file and directory into _site, which is not excluded in the configuration and doesn't start with _ prefix. Files that have front-matter will be processed in addition to copying. So in result Jekyll will generate this structure:
_site/
otherservices/ (copies it)
index.html
index.html (generates it from index.md)
otherservices/
index.html
index.md
It is worth reading the documentation on how to create custom pages.
i have a mixed situation where i have my custom website generated in a _dev folder, and i want jekyll generated blog files to go in that same folder. of course i don't want jekyll to wipe up any of the files that are already there, but just to wipe up and rebuild the jekyll related files.
i don't want to list all the things i want to keep like this:
keep_files: [js,css,images,*.html]
plus the *.html, while building, throws an error. is there a way to tell jekyll to just wipe up and rebuild the jekyll related files only?
i can't find many options on this on the official documentation.
i'm on jekyll 3.4.3
By default Jekyll deletes the output folder before building the site. Unless you change that behaviour in source code you can build your website in a temporal folder and copy the contents replacing the old files in your website folder.
jekyll build --destination /tmp/jk
cp -r /tmp/jk/* _dev/
This way it will only replace the Jekyll related files.
I'm considering Jekyll for a site I'm putting together that will be a blog with lots of images (and other larg-ish media files). It's easy enough to to make a directory for images and then link to them as needed in the posts. But, as I understand it, when the site is generated, all the image data will be duplicated into the generated _site directory that holds the static files. Each time the site is generated the _site directory is emptied, and repopulated with the static version of the site.
Is there any way to, for example, drop a symlink to the images directory inside the site directory, and then maybe have jekyll ignore it when the static files are generated?
Or is there another way to go about this that makes more sense?
Assuming you are running on an apache web server, you can setup an Alias directive to serve images from a directory outside of the normal docroot. You need access to edit the VirtualHosts config or some other ability to create aliases directives (e.g. via a control panel).
For an example of how this would work, let's say you are storing your jekyll files under a directory called "/web/jekyll". To get your images directory do the following:
Add an "_images" directory along with your basic jekyll tree. Ending up with something like:
_config.yml
_images/
_layouts/
_posts/
_site/
index.md
Update your apache config to add the Alias directive like:
Alias /images /web/jekyll/_images
Reload the apache config and run jekyll to build the site.
Since the image directory name starts with an underscore, jekyll won't push/copy it to the output _site during the build. Apache will happily serve most files from your _site directory as normal, but when it sees something like "http://jekyll/images/test.jpg", instead of looking for the file under "/web/jekyll/_site/_images/test.jpg", it'll serve it from "/web/jekyll/_images/test.jpg".
Incidentally, I like a little more separation of the source content and output content than jekyll defaults to. So, I setup my directory structure as follows:
/web/jekyll/html/
/web/jekyll/images/
/web/jekyll/source/
/web/jekyll/source/_config.yml
/web/jekyll/source/_layouts
/web/jekyll/source/_posts
/web/jekyll/source/index.md
With the following option set in _config.yml
destination: ../html
And the apache alias directive setup with:
Alias /images /web/jekyll/images
Jekyll is run in the "/web/jekyll/source" directory, but output is sent to the "/web/jekyll/html" dir. Similar to the first example, calls to "http://jekyll/images/test.jpg" are served from "/web/jekyll/images/test.jpg". This setup doesn't really make a difference from a site serving perspective. I just like the cleaner separation between the raw source files, the fully baked output files and the images which work via the alias.
Correct, the first part of the jekyll command removes everything in the destination directory. The problem with that is the symlinks must be manually created again. So next, go ahead and create a script that does this each time.
Be sure that:
exclude: [jekyll, css, img] in the _config.yml file
linux: The ";" symbol runs first, second, third.. commands.
script: A file named jekyll with executable permissions containing
jekyll;
ln -s /var/www/css /var/www/_site/css;
ln -s /var/www/img /var/www/_site/img;
Finally run (./jekyll) that program instead of jekyll.
-Dan
Make a project page for the images.
Set up directory structure
/home/git/svnpenn.github.io
/home/git/img
Run Jekyll
# We cant add the symlink until after jekyll is done. We will remove the
# site folder and wait for it to rebuild.
rm -r _site
jekyll --server &
while [ ! -f _site/index.html ]
do
sleep 1
done
ln -s ../images _site/images
Note I was using this because I thought it would help publish time on GitHub
pages. It does not. GitHub can take 1-10 minutes to publish depending on the
server.
I know this has already been answered, but I went a slightly different route. I hosted all of my images in a public directory on Dropbox and use grunt to generate a manifest of the images. It keeps my repository small because the images don't get checked in. I detailed it a while back in a blog post.