Related
I have installed python 3.3.2 and pygame 1.9.2a0. Whenever I try to import pygame by typing:
import pygame
I get following error message :
Python 3.3.2 (v3.3.2:d047928ae3f6, May 16 2013, 00:03:43) [MSC v.1600 32 bit (Intel)] on win32
Type "copyright", "credits" or "license()" for more information.
>>> import pygame
Traceback (most recent call last):
File "<pyshell#0>", line 1, in <module>
import pygame
ImportError: No module named 'pygame'
>>>
I went through some of the questions related to this error but none of the solution helped.
I have 64 bit machine with Win7 OS
go to python/scripts folder, open a command window to this path, type the
following:
C:\python34\scripts> python -m pip install pygame
To test it, open python IDE and type
import pygame
print (pygame.ver)
It worked for me...
Here are instructions for users with the newer Python 3.5 (Google brought me here, I suspect other 3.5 users might end up here as well):
I just successfully installed Pygame 1.9.2a0-cp35 on Windows and it runs with Python 3.5.1.
Install Python, and remember the install location
Go here and download pygame-1.9.2a0-cp35-none-win32.whl
Move the downloaded .whl file to your python35/Scripts directory
Open a command prompt in the Scripts directory (Shift-Right click in the directory > Open a command window here)
Enter the command:
pip3 install pygame-1.9.2a0-cp35-none-win32.whl
If you get an error in the last step, try:
python -m pip install pygame-1.9.2a0-cp35-none-win32.whl
And that should do it. Tested as working on Windows 10 64bit.
I was trying to figure this out for at least an hour. And you're right the problem is that the installation files are all for 32 bit.
Luckily I found a link to the 64 pygame download! Here it is: http://www.lfd.uci.edu/~gohlke/pythonlibs/#pygame
Just pick the corresponding version according to your python version and it should work like magic. The installation feature will bring you to a bright-blue screen as the installation (at this point you know that the installation is correct for you.
Then go into the Python IDLE and type "import pygame" and you should not get any more errors.
Props go to #yuvi who shared the link with StackOverflow.
open the folder where your python is installed
open scripts folder
type cmd in the address bar. It opens a command prompt window in that location
type pip install pygame and press enter
it should download and install pygame module
now run your code. It works fine :-)
I had the same problem and discovered that Pygame doesn't work for Python3 at least on the Mac OS, but I also have Tython2 installed in my computer as you probably do too, so when I use Pygame, I switch the path so that it uses python2 instead of python3. I use Sublime Text as my text editor so I just go to
Tools > Build Systems > New Build System and enter the following:
{
"cmd": ["/usr/local/bin/python", "-u", "$file"],
}
instead of
{
"cmd": ["/usr/local/bin/python3", "-u", "$file"],
}
in my case. And when I'm not using pygame, I simply change the path back so that I can use Python3.
The current PyGame release, 1.9.6 doesn't support Python 3.9. I fyou don't want to wait for PyGame 2.0, you have to use Python 3.8. Alternatively, you can install a developer version by explicitly specifying the version (2.0.0.dev20 is the latest release at the time of writing):
pip install pygame==2.0.0.dev20
or try to install a pre-release version by enabling the --pre option:
pip install pygame --pre
Resolved !
Here is an example
C:\Users\user\AppData\Local\Programs\Python\Python36-32\Scripts>pip install pygame
try this in your command prompt:
python -m pip install pygame
I was getting the same error. It is because your version of Pygame is not compatible with your version of Python or Pydev. Go to this link and get the proper version of Pygame for your current version of Python. Ctrl F to find it faster or click on the word python in blue. up at the top. While you instal Pygame it should find the Python path by itself. At least mind did any ways. I run Pygame through Eclipse with Python 3.4.
http://www.lfd.uci.edu/~gohlke/pythonlibs/
Since no answer stated this:
Make sure that, if you are using a virtual environment, you have activated it before trying to run the program.
If you don't really know if you are using a virtual environment or not, check with the other contributors of the project. Or maybe try to find a file with the name activate like this: find . -name activate.
Install and download pygame .whl file.
Move .whl file to your python35/Scripts
Go to cmd
Change directory to python scripts
Type:
pip install pygame
Here is an example:
C:\Users\user\AppData\Local\Programs\Python\Python36-32\Scripts>pip install pygame
I just encountered the same problem and found that I am having multiple interpreters of the different versions installed in my system and pygame got installed in one of them when I installed it using command but in my IDE another interpreter was selected so this messed up my system, try to see if you are also having the same situation.
Just use this command in the terminal python3 -m pip install -U pygame --user
I am a quite newbie to python and I was having same issue. (windows x64 os)
I have solved, doing below steps
I removed python (x64 version) and pygame
I have downloaded and installed python 2.6.6 x86: https://www.python.org/ftp/python/2.6.6/python-2.6.6.msi
I have downloaded and installed pygame (when installing, I have chosen the directory that I installed python): http://pygame.org/ftp/pygame-1.9.1.win32-py2.6.msi
Works well :)
You don't need 64 bit Python on Win64 system, just install the 32bit versions of both Python and Pygame and they will work just fine (and there is a ton more modules for them anyways).
I’m using the PyCharm IDE. I could get Pygame to work with IDLE but not with PyCharm. This video helped me install Pygame through PyCharm.
https://youtu.be/HJ9bTO5yYw0
(It seems that PyCharm only recognizes a package; if you use its GUI.)
However, there were a few slight differences for me; because I’m using Windows instead of a Mac.
My “preferences” menu is found in: File->Settings…
Then, in the next screen, I expanded my project menu, and clicked Project Interpreter. Then I clicked the green plus icon to the right to get to the Available Packages screen.
I ran into the error a few days ago! Thankfully, I found the answer.
You see, the problem is that pygame comes in a .whl (wheel) file/package. So, as a result, you have to pip install it.
Pip installing is a very tricky process, so please be careful. The steps are:-
Step1. Go to C:/Python (whatever version you are using)/Scripts. Scroll down. If you see a file named pip.exe, then that means that you are in the right folder. Copy the path.
Step2. In your computer, search for Environment Variables. You should see an option labeled 'Edit the System Environment Variables'. Click on it.
Step3. There, you should see a dialogue box appear. Click 'Environment Variables'. Click on 'Path'. Then, click 'New'. Paste the path that you copies earlier.
Step4. Click 'Ok'.
Step5. Shift + Right Click wherever your pygame is installed. Select 'Open Command Window Here' from the dropdown menu. Type in 'pip install py' then click tab and the full file name should fill in. Then, press Enter, and you're ready to go! Now you shouldn't get the error again!!!
First execute python3 then type the command import pygame,now you can see the output
For this you have to install pygame package from the cmd (on Windows) or from terminal (on mac). Just type pip install pygame
.If it doesn't work for you, then try using this statement pip3 install pygame .
If it is still showing an error then you don't have pip installed on your device and try installing pip first.
make sure if you are on windows that your library directory is added to path
This may happen when pygame didn't installed, install the pygame first
pip
pip install pygame
if dont work update the PIP by goto python install folder and type
python -m pip install --upgrade pip
hope it work
Try this solution:
Type in to cmd (Windows):
C:\Users\'Your name'> pip install -U pygame
You should remove python -m, py -m, python3 -m before the pip
Also remove --user behind it.
It will said:
C:\Users\viait>pip install -U pygame
Defaulting to user installation because normal site-packages is not writeable
Collecting pygame
Downloading pygame-2.1.2-cp310-cp310-win_amd64.whl (8.4 MB)
---------------------------------------- 8.4/8.4 MB 1.7 MB/s eta 0:00:00
Installing collected packages: pygame
Successfully installed pygame-2.1.2
Then test it in your IDE or cmd:
(CMD example)
C:\Users\viait>python
Python 3.10.3 (tags/v3.10.3:a342a49, Mar 16 2022, 13:07:40) [MSC v.1929 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
>>> import pygame
pygame 2.1.2 (SDL 2.0.18, Python 3.10.3)
Hello from the pygame community. https://www.pygame.org/contribute.html
(IDE example)
import pygame
You can do this without any errors.
You could use
pip install pygame
but if you use IDE like PyCharm, then you could just either install it from Python Packages or use right click at the package name then left click on Show Context Actions then left click on Install package pygame
(Personally, I recommended using Python Packages for the package installing because it has documentation with it)
You gotta use Pycharm and install it in Terminal using pip install pygame and also after that enter Pycharm and hover on pygame in the "Import pygame" and in Pycharm it will tell you to download that and you can easily download it and enjoy your result
I was having the same trouble and I did
pip install pygame
and that worked for me!
I have installed python 3.3.2 and pygame 1.9.2a0. Whenever I try to import pygame by typing:
import pygame
I get following error message :
Python 3.3.2 (v3.3.2:d047928ae3f6, May 16 2013, 00:03:43) [MSC v.1600 32 bit (Intel)] on win32
Type "copyright", "credits" or "license()" for more information.
>>> import pygame
Traceback (most recent call last):
File "<pyshell#0>", line 1, in <module>
import pygame
ImportError: No module named 'pygame'
>>>
I went through some of the questions related to this error but none of the solution helped.
I have 64 bit machine with Win7 OS
go to python/scripts folder, open a command window to this path, type the
following:
C:\python34\scripts> python -m pip install pygame
To test it, open python IDE and type
import pygame
print (pygame.ver)
It worked for me...
Here are instructions for users with the newer Python 3.5 (Google brought me here, I suspect other 3.5 users might end up here as well):
I just successfully installed Pygame 1.9.2a0-cp35 on Windows and it runs with Python 3.5.1.
Install Python, and remember the install location
Go here and download pygame-1.9.2a0-cp35-none-win32.whl
Move the downloaded .whl file to your python35/Scripts directory
Open a command prompt in the Scripts directory (Shift-Right click in the directory > Open a command window here)
Enter the command:
pip3 install pygame-1.9.2a0-cp35-none-win32.whl
If you get an error in the last step, try:
python -m pip install pygame-1.9.2a0-cp35-none-win32.whl
And that should do it. Tested as working on Windows 10 64bit.
I was trying to figure this out for at least an hour. And you're right the problem is that the installation files are all for 32 bit.
Luckily I found a link to the 64 pygame download! Here it is: http://www.lfd.uci.edu/~gohlke/pythonlibs/#pygame
Just pick the corresponding version according to your python version and it should work like magic. The installation feature will bring you to a bright-blue screen as the installation (at this point you know that the installation is correct for you.
Then go into the Python IDLE and type "import pygame" and you should not get any more errors.
Props go to #yuvi who shared the link with StackOverflow.
open the folder where your python is installed
open scripts folder
type cmd in the address bar. It opens a command prompt window in that location
type pip install pygame and press enter
it should download and install pygame module
now run your code. It works fine :-)
I had the same problem and discovered that Pygame doesn't work for Python3 at least on the Mac OS, but I also have Tython2 installed in my computer as you probably do too, so when I use Pygame, I switch the path so that it uses python2 instead of python3. I use Sublime Text as my text editor so I just go to
Tools > Build Systems > New Build System and enter the following:
{
"cmd": ["/usr/local/bin/python", "-u", "$file"],
}
instead of
{
"cmd": ["/usr/local/bin/python3", "-u", "$file"],
}
in my case. And when I'm not using pygame, I simply change the path back so that I can use Python3.
The current PyGame release, 1.9.6 doesn't support Python 3.9. I fyou don't want to wait for PyGame 2.0, you have to use Python 3.8. Alternatively, you can install a developer version by explicitly specifying the version (2.0.0.dev20 is the latest release at the time of writing):
pip install pygame==2.0.0.dev20
or try to install a pre-release version by enabling the --pre option:
pip install pygame --pre
Resolved !
Here is an example
C:\Users\user\AppData\Local\Programs\Python\Python36-32\Scripts>pip install pygame
try this in your command prompt:
python -m pip install pygame
I was getting the same error. It is because your version of Pygame is not compatible with your version of Python or Pydev. Go to this link and get the proper version of Pygame for your current version of Python. Ctrl F to find it faster or click on the word python in blue. up at the top. While you instal Pygame it should find the Python path by itself. At least mind did any ways. I run Pygame through Eclipse with Python 3.4.
http://www.lfd.uci.edu/~gohlke/pythonlibs/
Since no answer stated this:
Make sure that, if you are using a virtual environment, you have activated it before trying to run the program.
If you don't really know if you are using a virtual environment or not, check with the other contributors of the project. Or maybe try to find a file with the name activate like this: find . -name activate.
Install and download pygame .whl file.
Move .whl file to your python35/Scripts
Go to cmd
Change directory to python scripts
Type:
pip install pygame
Here is an example:
C:\Users\user\AppData\Local\Programs\Python\Python36-32\Scripts>pip install pygame
I just encountered the same problem and found that I am having multiple interpreters of the different versions installed in my system and pygame got installed in one of them when I installed it using command but in my IDE another interpreter was selected so this messed up my system, try to see if you are also having the same situation.
Just use this command in the terminal python3 -m pip install -U pygame --user
I am a quite newbie to python and I was having same issue. (windows x64 os)
I have solved, doing below steps
I removed python (x64 version) and pygame
I have downloaded and installed python 2.6.6 x86: https://www.python.org/ftp/python/2.6.6/python-2.6.6.msi
I have downloaded and installed pygame (when installing, I have chosen the directory that I installed python): http://pygame.org/ftp/pygame-1.9.1.win32-py2.6.msi
Works well :)
You don't need 64 bit Python on Win64 system, just install the 32bit versions of both Python and Pygame and they will work just fine (and there is a ton more modules for them anyways).
I’m using the PyCharm IDE. I could get Pygame to work with IDLE but not with PyCharm. This video helped me install Pygame through PyCharm.
https://youtu.be/HJ9bTO5yYw0
(It seems that PyCharm only recognizes a package; if you use its GUI.)
However, there were a few slight differences for me; because I’m using Windows instead of a Mac.
My “preferences” menu is found in: File->Settings…
Then, in the next screen, I expanded my project menu, and clicked Project Interpreter. Then I clicked the green plus icon to the right to get to the Available Packages screen.
I ran into the error a few days ago! Thankfully, I found the answer.
You see, the problem is that pygame comes in a .whl (wheel) file/package. So, as a result, you have to pip install it.
Pip installing is a very tricky process, so please be careful. The steps are:-
Step1. Go to C:/Python (whatever version you are using)/Scripts. Scroll down. If you see a file named pip.exe, then that means that you are in the right folder. Copy the path.
Step2. In your computer, search for Environment Variables. You should see an option labeled 'Edit the System Environment Variables'. Click on it.
Step3. There, you should see a dialogue box appear. Click 'Environment Variables'. Click on 'Path'. Then, click 'New'. Paste the path that you copies earlier.
Step4. Click 'Ok'.
Step5. Shift + Right Click wherever your pygame is installed. Select 'Open Command Window Here' from the dropdown menu. Type in 'pip install py' then click tab and the full file name should fill in. Then, press Enter, and you're ready to go! Now you shouldn't get the error again!!!
First execute python3 then type the command import pygame,now you can see the output
For this you have to install pygame package from the cmd (on Windows) or from terminal (on mac). Just type pip install pygame
.If it doesn't work for you, then try using this statement pip3 install pygame .
If it is still showing an error then you don't have pip installed on your device and try installing pip first.
make sure if you are on windows that your library directory is added to path
This may happen when pygame didn't installed, install the pygame first
pip
pip install pygame
if dont work update the PIP by goto python install folder and type
python -m pip install --upgrade pip
hope it work
Try this solution:
Type in to cmd (Windows):
C:\Users\'Your name'> pip install -U pygame
You should remove python -m, py -m, python3 -m before the pip
Also remove --user behind it.
It will said:
C:\Users\viait>pip install -U pygame
Defaulting to user installation because normal site-packages is not writeable
Collecting pygame
Downloading pygame-2.1.2-cp310-cp310-win_amd64.whl (8.4 MB)
---------------------------------------- 8.4/8.4 MB 1.7 MB/s eta 0:00:00
Installing collected packages: pygame
Successfully installed pygame-2.1.2
Then test it in your IDE or cmd:
(CMD example)
C:\Users\viait>python
Python 3.10.3 (tags/v3.10.3:a342a49, Mar 16 2022, 13:07:40) [MSC v.1929 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
>>> import pygame
pygame 2.1.2 (SDL 2.0.18, Python 3.10.3)
Hello from the pygame community. https://www.pygame.org/contribute.html
(IDE example)
import pygame
You can do this without any errors.
You could use
pip install pygame
but if you use IDE like PyCharm, then you could just either install it from Python Packages or use right click at the package name then left click on Show Context Actions then left click on Install package pygame
(Personally, I recommended using Python Packages for the package installing because it has documentation with it)
You gotta use Pycharm and install it in Terminal using pip install pygame and also after that enter Pycharm and hover on pygame in the "Import pygame" and in Pycharm it will tell you to download that and you can easily download it and enjoy your result
I was having the same trouble and I did
pip install pygame
and that worked for me!
I want to run a Django application in PyCharm which works on MySQL DB.
I am unable to connect my program to the database.
When I am trying to install MySQLclient or MySQL-python I am getting the error:
Failed building wheel for MySQLclient
Please help me out in connecting my Django program with MySQL database.
Edit
Please try installing the .whl file from http://www.lfd.uci.edu/~gohlke/pythonlibs/. This works every time. Just type pip install MySQL_python‑1.2.5‑cp27‑none‑win32.whl in the terminal.
Original Answer
I had the same issue. You might find these steps helpful.
Make sure you are in an activated virtualenv when you are installing anything through pip.
Before you install anything, type pip list in the terminal to see what you have installed in the virtualenv. It should have wheel, setuptools and pip.
This is the part that helped me, type pip install mysqlclient==1.3.9 or whatever version you want to install. This needs to happen before you install django.
Hopefully, it works and you can go ahead and install Django.
If these steps didn't work out for you, try installing MySQL-Python through the executable file here https://pypi.python.org/pypi/MySQL-python/1.2.5.
But this will only install mysql-python for you in the system. You can try pip list outside virtualenv to see if mysql-python is installed. If it is installed, then you have update this post so we can figure out a solution.
In the meantime some other fixes are:
Can't install mysql-python (newer versions) in Windows
Install Visual C++ for Python and add the bin folder to the PATH environment variable.
Make sure the mysql service is running in the background or is installed in your system by running mysql commands through the terminal.
Sometimes, two different instances of mysql service might cause this error i.e. if you have installed mysql server or any other product multiple times in the past, you might have to get rid of the ports the past services used. In this case, do a fresh installation of mysql server and add the ~\bin path to the PATH environment variable.
I had the same problem. I then uninstalled my python. Downloaded the python 3.6.5.
then used a command from
Python 3.7, Failed building wheel for MySql-Python
the command is pip install mysqlclient==1.3.12
In case you are using sqlalchemy(which implicitly uses mysql-python) to connect to a MySQL database, updating it using pip install sqlalchemy --upgrade might do the trick and while creating a connection using an engine the syntax should be:
from sqlalchemy import create_engine
HOST = "your_host_name.host.com"
USER = "your_username"
PASSCODE = "your_passcode"
DATABASE = "name_of_database"
engine = create_engine(f'mysql+mysqldb://{USER}:{PASSCODE}#{HOST}/{DATABASE}')
I found a solution to install mysqlclient on Windows 10 64 bit, Django version 3.10.0
Download preferred mysqlclient wheel for your OS/bit size. here :
https://pypi.tuna.tsinghua.edu.cn/simple/mysqlclient/
Point to the directory such as C:\Users\hp\Desktop\storefront\store from your prompt or terminal
install using pip i.e: C:\Users\hp\Desktop\storefront\store > pip install mysqlclient-2.1.0-cp310-cp310-win_amd64.whl
I hope this would help.I am running Python3.7 on windows 7 (32-bit). I had the same issue and tried using PIP commands from windows CLI. Although, my pip installation was successful but I was not able to add MYSQL or MYSQL-Connector-Python from Pycharm GUI. I used Pycharm Terminal for Below packages and was able to connect to MYSQL database.
Example:
(PTPT) C:\Windows\System32>pip3 install mysql-connector-python==8.0.29
Collecting mysql-connector-python==8.0.29
Downloading https://files.pythonhosted.org/packages/32/cd/1581bfe8f5ad7fd2aecdc499f0387227ad7912419384f9393b6205a764da/mysql_connector_python-8.0.29-py2.py3-none-any.whl (342kB)
|████████████████████████████████| 348kB 409kB/s
Requirement already satisfied: protobuf>=3.0.0 in c:\users\maghy\ptpt\lib\site-packages (from mysql-connector-python==8.0.29) (3.20.1)
Installing collected packages: mysql-connector-python
Found existing installation: mysql-connector-python 8.0.30
Uninstalling mysql-connector-python-8.0.30:
Successfully uninstalled mysql-connector-python-8.0.30
Successfully installed mysql-connector-python-8.0.29
WARNING: You are using pip version 19.3.1; however, version 22.2.2 is available.
You should consider upgrading via the 'python -m pip install --upgrade pip' command.
pip install C:\Users\USER_NAME\Downloads\mysqlclient-1.4.6-cp37-cp37m-win32.whl
PYCHARM MYSQL PACKAGE
I'm trying to run a web app (built with flask-wtforms and using iGraph) on Pythonanywhere. As igraph isn't part of the already inculded modules, I try and install it using the bash console, as such:
pip install --user python-igraph
How ever, what I get is:
Could not download and compile the C core of igraph.
It usually means (according to other people having the same issue on Stackoverflow) that I need to first install:
sudo apt-get install -y libigraph0-dev
Except, apt-get isn't available on Pythonanywhere, as far as I know.
Is there any workaround to install the iGraph module for Python 2.7 on Pythonanywhere?
python-igraph installed perfectly fine in my account. My guess is that you're facing a different issue to a missing library. Perhaps a network error or something like that.
Currently unable to install Pygame via pip:
pip install pygame
Getting this message:
Concerned by it being termed an EOF error, is this an error in the module itself?
There's dev versions available as of now. Get them via
pip install pygame==2.0.0.dev6
Pygame is not compatible with Python 3.8 at the moment. I would recommend you to downgrade back to 3.7 and installing with pip there.
pip is doesn't have pygame up.
But there is a alternative that worked for me. https://www.pygame.org/wiki/CompileWindows
Read and follow the steps correctly and it should install.
you also need to update your code to pygame 2.0.0 code because it's only for 3.8
BTW you have to follow the SDL2 instructions since pygame 2.0.0 uses that.
the above commands worked for me today 3-15-20 with Python-3-8-0 on Linux Mint 19
to get IDLE to recognize pygame.
sudo pip3 install pygame==2.0.0.dev6
I also had to update pip first with
sudo pip3 install --upgrade pip
Pygame requires visual studio C++ build tools to install. Ensure you have these downloaded from here.
Open power shell window and make sure your internet is on
Then type the following command
pip install pygame
It will automatically download it for you and also install it
Again make sure your internet is on
I have python 3.8.2 and it worked on my pc