I am setting up web authentication for Airflow web server. I added a few users following the guidance of the official guide. Now I want to delete all users that have been added, what should I do?
I have tried to
session = settings.Session()
session.delete(user)
, but it does not work. Even if it works and it will only delete one user at a time.
Maybe I should regenerate the SQLAlchemy user table?
Make sure you are calling session.commit() afterwards to commit the transaction. If you want to delete all users at once, try Session.query(User).delete() instead. Also note that you can delete through the Airflow UI under Admin > Users.
Also you can do it in CLI:
airflow users delete -u aramis
just copy this 100 times and change the username with all users you have, then paste it into CLI.
-u is username
Related
I'm hosting a Wordpress instance on a VPS with MariaDB. Everything seemed to work fine until now where I will try to log into my account but it says,
The username {name} is not registered on this site. If you are unsure of your username, try your email address instead.
I've never gotten this error before so I checked the MariaDB and the user is in the wp_users table. I even changed the password to make sure the password was correct. Any help is appreciated! and thank you in advance.
You can also create a new admin user from SSH access into your VPS.
For this:
Go to your website root directory.
Run the following command:
wp user create $username $emailaddress –role=$role
Be sure to replace the ($username and $emailaddress) example values with your own custom values and ($role) the role you would like the user to be configured with. When the command completes running, a password will be returned, as in the example output below:
exampl3#example.com [~/public_html]# wp user create exampl3
admin#example.com –role=administrator Success: Created user 2enter
code here Password: srWCdc3c*(&b
Refer to the table below, to determine what each role’s capabilities are. This will help you to choose which role to set as the user in the command above.
Role Description
Super Admin Can access all administration features (including site
network administration). Administrator => Can access all
administration features (within a single site). Editor => Can publish
and manage posts (including posts by other users). Author => Can
publish and manage their own posts. Contributor => Can write and
manage their own posts (but cannot publish). Subscriber => Can only
manage their profile.
After creating your account, try to log in again.
Hope this will fix your issue.
Regards
I have a request from a customer and I am quite sure the answer is no, but wondering if someone has a different answer.
Background
As you know MySQL installation create a database called "mysql" where it stores the databases we create and also the users.
In the user table, there is a field called "authentication_string" where the user password is saved.
Project
On this project each time a customer creates an account a new database user and database is created.
When a customer logs in through a web interface, the system calls an API to authenticate him/her. After that the root db user is used to connect to customer database, not their own database credentials, why? because they do not want to save user and password on database (this is a temp solution)
They want to change the application so after authentication/authorization process and they would somehow only needed root credentials to somehow get user and password from "mysql db" and then use them to create the connection using customer db credentials.
Is this possible? Or is there some mysql parent - children configuration where this scenario is possible?
Project uses MySQL 5.7
From what I can understand I think you could just use MySQL’s SET PASSWORD to set some random strong password for the user and then login using that. This way you would not store anything and it would still be pretty secure assuming your root db access is fairly isolated from the thing that’s trying to login as the user.
For example:
SET PASSWORD FOR some_user = <long-strong-randomly-generated-password-string>
Afterwards you return this <long-strong-randomly-generated-password-string> from your access-providing process and then the user process can login using that. In this case it would stay valid until the next SET PASSWORD, so keep that in mind, but depending on your use-case that might be ok.
Error in processing request: No routine with name 'daily_difference' found in database 'chamelis_wp'. You might be lacking the necessary privileges to edit this routine.
If you are using phpMyAdMin (pma) under cPanel, this error results from the fact that cPanel creates a temporary user for every session to log into pma, and therefore the database. If you are working in a hosted environment where you cannot be granted SUPER privileges, and you are creating routines, you are in trouble. Read on.
Stored routines (procedures and functions) in MySQL/Mariadb have a property called DEFINER. This stores the username of the the database user who "owns" that routine. If a db user opens phpMyAdmin (pma) and creates a new routine without explicitly declaring the DEFINER, DEFINER will be populated with the current username. Only a db user that has SUPER permissions can create a routine and declare another user as the DEFINER. Non-SUPER users can only declare themselves as the DEFINER, or leave it blank and the db does it for them. So the db user that you are logged in as gets to be the DEFINER for all routines you create during that session.
The problem you have encountered arises because
a. only the DEFINER of a routine, or a user with SUPER permissions, can edit or export a routine. If a (non-SUPER) user logs in to pma and tries to edit or export an existing routine, then unless they are the DEFINER of that routine they get the error you are seeing, and they cannot access the routine.
b. Even if you have created database user accounts in cPanel, cPanel will not use any of these to launch pma. Under cPanel you are automatically logged using a temp username that it generates. You do not get to see the pma login page - the login happens off-screen - and you are taken straight into the pma home page. You have no control over the username/password used.
d. When you start a new cPanel session (e.g. at the start of each day's work), cPanel changes the temp db user name that it uses to log you into pma. cPanel usernames all have this pattern: "cpses_db...#localhost", where the dots are filled alphanumerics like "hmxbj8s2". I have just logged in and the pma home page tells me that the current database user is "cpses_dbhmxbj8s2#localhost". If I close pma, log out of cPanel, log back into cPanel then reopen pma, the db user name will change. I just did that and the db user for this new session is "cpses_db0z35t107#localhost".
e. If I had created a new routine during my previous session, then the DEFINER for that routine would still be "cpses_dbhmxbj8s2#localhost". Now that I am logged in as "cpses_db0z35t107#localhost", I cannot edit or export that routine. Without a backup or copy of that routine, I have completely lost access to it (it is now, effectively, "orphaned"). The only way to get access is to recreate it using a script without a DEFINER statement in the current session so the the current db user becomes the DEFINER. That user can now edit the routine. This means that every day you would have to recreate all the procedures you want to work on. If you forget to export all the routines changed during the previous session, then you have LOST THOSE CHANGES.
f. Another problem is that if you are also connecting to the database externally using e.g. MySQL Workbench, logging in using a db user you have created, then you can do everything except edit any routines created under pma because these have "cpses_db..." user as the DEFINER.
THE SOLUTIONS:
Install your own copy of pma in your hosted enviroment if that option is available in cPanel. This will have to be installed in a folder in the public-html section of the site so you can access it directly from your browser e.g. https://example.com/pmamyadmin/index.php. Login using a user you have created for your database. This user becomes the DEFINER for all your routines and so long as you always use this username, you can always access your routines. (Never use cPanel's pma!)
Be aware that having a copy of pma in the public_html section of your site introduces security issues. Definitely require passwords in pma's config and if practical use .htaccess to limit access to just your IP, etc. But that's another topic.
Always access the database externally (assuming your host permits this) using a local copy of pma or another client like MySQL Workbench. Again, this allows you to control the username for every session.
FINALLY
If neither of these works for you and you must use cPanel's pma, then export all your routines at the end of every session and recreate them (with no DEFINER statement) at the start of the next session. Currently pma doesn't include the DROP in the routine export function (there a change request in for this) so you have to use a database export to get them included. Unless you want a full backup anyway, you just need to export the structure of one table to get this export to work. Make sure you click the "Include DROP..." and "Include Routines..." in the export definition. Edit the export to delete the table definition and globally replace the "DEFINER=cpses_db...#localhost" with "" before using it to recreate the routines next session.
Hope that helps.
I FIX THIS ISSUE IN CPANEL
This shows that there is lack of routines ( Function, Procedures ) privilege for the current user. This will cause even the edit button of routines to be disabled.
In CPanel there is default user that you can not manage their privileges, So, you can not add or remove their privileges.
<<<<< HOW I FIX IT >>>>>:
FIRST
Drop all routines(Function, Procedure) that you have no privilege from your database
SECOND ( import sql file again )
Find the sql file used to import database and remove DEFINER=root#localhost everywhere.
Then import Edited sql file after remove DEFINER=root#localhost .
I think this solution can help someone.
Thanks
It sounds like you don't have permission to edit it, or you're trying to edit it from the wrong DB (schema). Run the following to see which DB it is on:
show function status like '%daily%';
show procedure status like '%daily%';
Are you trying to edit it by executing a statement or by using the gui? If by executing a statement, can you provide your statement? If by statement, make sure you've run this first:
use db_name_here;
Then try to edit your routine again.
Did your user create the procedure, or another user created it? You may not have permission to modify an user's procedure. You can see who created it by running:
show create procedure daily_difference;
Then see if you have permission to edit procedures by running the below statement - you need "ALTER ROUTINE" privilege:
show grants for Your_username_here;
If a user with super privilege created it, you won't be able to edit it - you'll need them to, or you will need to get super privilege.
I'm replying partly as I have a work around and partly for the comedy, as GoDaddy sent me this page as a solution to this problem where, yes the problem is defined but no, there's no solution.
I had to rebuild my SPs in phpMyadmin but for the DEFINER where root#localhost was present, using an account I had created and could use - account#localhost. cPanel doesn't expose the root account AFAIK.
I didn't have all my SPs' definitions elsewhere. But I found that in cPanel \ files \ backup \ the files from there of the MySQL DBs had the SP definitions. That may not be in your hosting package. Backing up from phpMyAdmin didn't help as I still lacked the privileges to make the back up with the definitions.
I am trying to setup sonar in my pc.
Following the exact same steps as per official documentation.
I changed the database to mysql and port to 4950.
sonar.web.port=4950
sonar.jdbc.username=sonar
sonar.jdbc.password=root
sonar.jdbc.url=jdbc:mysql://localhost:3306/sonar?useUnicode=true&characterEncoding=utf8&rewriteBatchedStatements=true&useConfigs=maxPerformance
Now I can access sonar at port 4950,mysql contains a table of users which has a row of admin but i am unable to login with admin credentials.
I reverted back to its embedded database but still unable to login with admin credentials. Is there any property required to set or am I missing something. Please help
The docs include advice for when admin is locked out. In short, you might need to run some SQL:
INSERT INTO user_roles(user_id, role) VALUES ((select id from users where login='mylogin'), 'admin');
Good Day
I am a front-end developer, and I know little from MySQL and databases.
I have a Wordpress MySQL database in CPanel. Now I forgot my password, and the password for my user as seen in phpmyadmin is hashed/encrypted.
How do I get the password?
NOTE: I do not have access to the Server since this is a website on a shared hosting account, so doing the following is not possible for me:
See this post on Stack
Stop the MySQL process.
Start the MySQL process with the --skip-grant-tables option.
Start the MySQL console client with the -u root option.
List all the users;
SELECT * FROM mysql.user;
Reset password;
UPDATE mysql.user SET Password=PASSWORD('[password]') WHERE User='[username]';
But DO NOT FORGET to
Stop the MySQL process
Start the MySQL Process normally (i.e. without the --skip-grant-tables option)
when you are finished. Otherwise, your database's security could be compromised.
If your website is working you can probably find the mysql user/password
in the config.php file in your wordpress filesystem.
Otherwise:
Your best option is probably to add a user to the database and give it the needed privileges, to do that:
Click MySQL databases.
Create new user.
Assign new user to your database.
Edit config.php on your wordpress filesystem and change to the new username.
This is sub optimal, but will work.
There is a simple way for you to gain access to your WordPress user info if you don't know the password. I'm assuming you are talking about a WordPress user password retrieval. You need to have access and edit privileges to your database to do this.
-Open up phpMyAdmin or however you prefer to access database tables
-Select your database
-Open the table wp_users
-Under the column 'user_login' you will need to find which entry you want to access. Your username should be in one of the row entries.
-Once found, there will be a 'user_pass' column as well. Now some explaining needs to happen. You cannot retrieve your password without hacking/brute forcing that encryption. These are MD5 hash encrypted passwords. What we are going to do is just simply create a new password here. All you have to do is Google "MD5 Hash generator". I tested this on the first result I found and it worked.
-Once you find a website with a generator just simply type in your password and then retrieve the hash that's given to you. For example I typed in 'password' and I receive '5f4dcc3b5aa765d61d8327deb882cf99' Now we have a new encrypted password to set. If you are worried about sites saving your password entries or hashes just make up a password as a temporary fix. Then you can just login with that and change the password via the WordPress Dashboard later.
-Select the row that your username is in. Click Change/Edit then just copy and paste the entire MD5 Hash into the wp_pass column.(Overwrite the old password btw.) Save/Go/Execute to make sure the table was re-written. In this example I would be pasting '5f4dcc3b5aa765d61d8327deb882cf99' into the column without quotes of course.
-Please be sure to only change the 'wp_pass' entry and to make sure it's corresponding to the correct username.(On the same row)
-Now you should be able to login with your new password.('password')