There is a character, when moved across one tile to another sometimes the character either jumps over the meeting point of the tile polygons or becomes completely stuck and can no longer move in the direction they were going until they take a step back.
( video of issue: https://www.youtube.com/watch?v=wLAAHyinOVE )
( Interactive demo of issue: http://snkygames.com/InputSceneTest )
Has anyone else met with this issue? Any solution suggestions.
The issue still occurs if I allow body rotation.
The issue still occurs if I use a rectangle as a polygon instead of a circle.
Code:
//character
//material: elasticity=0.650, frictionDynamic=0.570, frictionStatic=1.200, density=1.000, frictionRolling=0.000
<body>.shapes.add(new Circle(16, null, <material>));
var vel:Vec2 = <body>.velocity;
<body>.velocity = Vec2.weak(vel.x + +/-2000.000 * 0.020, vel.y + 0.000);
//nape
<gravity> = new Vec2(0.000, 400.000);
<space>.step(***, 10, 10);
//rectangle tile
//material: elasticity=0.000, frictionDynamic=1.000, frictionStatic=1.000, density=1.000, frictionRolling=0.000
<body>.shapes.add(new Polygon(Polygon.box(<width>, <height>), <material>));
Related
I hope this hasn't been asked too much before. When I search I only get questions pertaining to rescaling to window size.
Now my question. I got one space ship firing a beam against another ship. I want the beam to show for some time and I want it to "bridge" the two ships. In other words, I want the beam to extend its width between the two ships.
I try to do this with a dot movie clip that is 1 pixel wide and high (and aligned left edge). I try to resize it with the following code: (target is the ship to be fire at and owner is the ship firing)
dist.vx = target.x - owner.x;
dist.vy = target.y - owner.y;
dist.dist = Math.sqrt(dist.vx*dist.vx + dist.vy*dist.vy);
width = dist.dist;
x = owner.x;
y = owner.y;
rotation = Math.atan2(target.y-y, target.x-x)*180/Math.PI;
This doesn't work as intended because 1) dot also gets alot bigger in the other dimension - how can I "turn off" this behavior? and 2) sometimes it seems to get way to wide - but only in certain angles...
Any suggestions on either solving the heigh/width scaling or on another way to achieve the same effect?
(I'm new to coding and flash.) Thanks!
By resizing a dot, you will have a rectangle...
You can dynamically create a sprite covering both ships and moveTo the hit point of one ship then lineTo the other ship... You do not need distance calculation at all. What you have to do is being careful on the placement of the sprite. So that you can calculate relative hitting points by simple math.
Suppose you have mc space contining mc ship1 and mc ship2, and hit point coords on ships are named hx, hy and you will use sprite s, calculation will be as follows.
// calculate hit points relative to mc space
var s1HX:int = ship1.x + ship1.hx,
s1HY:int = ship1.y + ship1.hy,
s2HX:int = ship2.x + ship2.hx,
s2HY:int = ship2.y + ship2.hy,
// sprite relative moveTo lineTo coords will be these.
mX: int, mY: int,
lX: int, lY: int;
// top left of sprite will be minimum of the hit coords.
s.x = (s1HX <= s2HX)? s1HX : s2HX;
s.y = (s1HY <= s2HY)? s1HY : s2HY;
// now we can get sprite relative moveTo lineTo coordinates:
mX = s1HX - s.x;
mY = s1HY - s.y;
lX = s2HX - s.x;
lY = s2HY - s.y;
The rest is implementation with using these with fancy line styles etc...
To create a new sprite:
var s:Sprite = new Sprite();
Adding / removing it to/from mc space:
space.addChild(s);
space.removeChild(s);
For graphics use the graphics object of sprite.
s.graphics
For setting line styles you can use:
s.graphics.lineStyle(...) ,
s.graphics.lineBitmapStyle(...),
s.graphics.lineGradientStyle(...)
Functions, please read the manual for usage.
After setting the line style to draw the line use:
s.graphics.moveTo(mX,mY);
s.graphics.lineTo(lX,lY);
For pulsating effects you have to do a little more complicated things such as using tween class which you can read about here: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/fl/transitions/Tween.html
Note that:
Sprites are no complicated magic, they are like mc's but they do not have timelines etc.
Sprites try to scale when width or height change programmatically. So do not touch them, moveTo lineTo automatically sets the size of a sprite...
I'm trying to zoom a DisplayObject into a certain point. I figured it would be easy, but I've spent a day now trying to figure it out.
Basically, I think this should work. Emphasis on should.
//newPoint is the point being centered. There is no initial scaling, so I do not need to compensate for that (yet)
//scale is the zoom level
//container is the parent of the obj
//obj is the object being scaled/panned
var p:Point = new Point(
( this.container.width - this.obj.width * scale + newPoint.x * scale ) / 2,
( this.container.height - this.obj.height * scale + newPoint.y * scale ) / 2
);
this.obj.scaleX = this.obj.scaleY = scale;
this.obj.x = p.x;
this.obj.y = p.y;
It centers the point if scale is 1, but it gets further and further away from center as you increase the scale. I've tried dozens of different methods. This method, which I have seen on several sites, produced the same exact results. Anyone have any idea how to get this to work?
EDIT 10-1-12:
As a followup, I took the code snippet that LondonDrugs_MediaServices provided as a basis for my original issue. I needed to be able to zoom to a specific point at a specific scale relative to the unscaled image (think how Google Maps zooms to a specific location). To do this, I had to center my image on the point before running the translation code. I've posted the additional code below. For other uses (pinch to zoom, scrolling, and double click), I used the code provided by Vesper, which worked quite well.
//obj is the object being translated
//container is its parent
//x and y are the coordinates to be zoomed to, in untranslated scaling
//obj.scaleX and obj.scaleY are always identical in my class, so there is no need to account for that
//calculates current center point, with scaling
var center:Point = new Point( ( this.container.width - this.obj.width * this.obj.scaleX ) / 2, ( this.container.height - this.obj.height * this.obj.scaleX ) / 2 );
//calulcates the distance from center the point is, with scaling
var distanceFromCenter:Point = new Point( this.obj.width * this.obj.scaleX / 2 - x * this.obj.scaleX, this.obj.height * this.obj.scaleX / 2 - y * this.obj.scaleX );
//center the object on that specific point
this.obj.x = center.x + distanceFromCenter.x;
this.obj.y = center.y + distanceFromCenter.y;
var mat:Matrix=new Matrix();
mat.translate(-p.x,-p.y);
mat.scale(desiredScale,desiredScale);
mat.translate(p.x,p.y);
yourObject.transform.matrix=mat;
The core point is that scaling is done around (0,0), but you can do it with matrix that describes affine transformations. You first make an empty matrix (that is, a matrix that doesn't transform), then apply a set of transformations to it. First, place a desired point at (0,0) by translating by -1*coordinates, then scale, then translate back.
hie guys....
thank's your comments...
i found the answer...
code :
gambar.addEventListener(TransformGestureEvent.GESTURE_ZOOM , onZoom);
function onZoom(event:TransformGestureEvent):void {
var locX:Number=event.localX;
var locY:Number=event.localY;
var stX:Number=event.stageX;
var stY:Number=event.stageY;
var prevScaleX:Number=gambar.scaleX;
var prevScaleY:Number=gambar.scaleY;
var mat:Matrix;
var externalPoint=new Point(stX,stY);
var internalPoint=new Point(locX,locY);
gambar.scaleX *= event.scaleX;
gambar.scaleY *= event.scaleY;
if(event.scaleX>1 && gambar.scaleX>6){
gambar.scaleX=prevScaleX;
gambar.scaleY=prevScaleY;
}
if(event.scaleY>1 && gambar.scaleY>6){
gambar.scaleX=prevScaleX;
gambar.scaleY=prevScaleY;
}
if(event.scaleX<1 && gambar.scaleX<0.8){
gambar.scaleX=prevScaleX;
gambar.scaleY=prevScaleY;
}
if(event.scaleY<1 && gambar.scaleY<0.8){
gambar.scaleX=prevScaleX;
gambar.scaleY=prevScaleY;
}
mat=gambar.transform.matrix.clone();
MatrixTransformer.matchInternalPointWithExternal(mat,internalPoint,externalPoint);
gambar.transform.matrix=mat;
}
The matrix answer is absolutely correct, but if you happen to be a Club GreenSock member you can get some nice functionality with very simple code with the TransformAroundPointPlugin
http://www.greensock.com/as/docs/tween/com/greensock/plugins/TransformAroundPointPlugin.html
You can see an example in the plugin explorer here:
http://www.greensock.com/tweenlite/#plugins
I use this to tween all my zooms and have much better performance than when I tried to do this manually. IMO the whole library is worth it's weight in gold (and no I have no connection other than liking the library). If you need any of the other features I'd look into it. It also has the ThrowProps plugin ( http://www.greensock.com/throwprops/ )which is very important if you are going to have a bounding box on mobile that you want to have a smooth return into the boundaries.
Set obj.x to -p.x and obj.y to -p.y, set the container scaleX and scaleY to the desired value and add p.x to the container x and p.y to the container y. Done!
First of all sorry for some english mistakes. Portuguese is my first language(I am from Brazil)
Im trying to make a space game from scratch in AS3 and the way to move the ship is like in the game Air Traffic Chief.
I succeed at some point. But when the ship is very fast it start to shake and its not very smooth and clean as I want.
Here is what i have done: http://megaswf.com/s/2437744
As the code is very big so I pasted in pastebin: pastebin.com/1YVZ23WX
I also wrote some english documentation.
This is my first game and my first post here. I really hope you guys can help me.
Thanks in advance.
Edit:
As the code is very big i will try to clarify here.
When the user MouseDown and MouseMove the ship every coordinate is passed to an array.
When the user MouseUP this array is passed to a function that fix the array.
For example: If the distance between two coordinates is greater than 5px, the function creates a coordinate in the middle of the two coordinates.
if I take this function off the problem seen to be solved. But if the user move the mouse very slow it still happens. It also creates a problem that i was trying to solve with that function. as the distance of the two coordinates are very big when the ship arrive in one coordinate most of the line path disappear.
I uploaded a version without the function that fixes the array. http://megaswf.com/s/2437775
I think there is 2 ways for solving this problem
1- Try to fix the noise in the array of coordinates 2- Take off the function that create an coordinate between two points and try to fix the problem of the line path disappear.
Here is the 2 important functions:
this function moves the ship
private function mover():void
{
if (caminhoCoords[0]!=null) // caminhoCoords is the array that contain the path
{
var angulo:Number = Math.atan2(this.y - caminhoCoords[0][1], this.x - caminhoCoords[0][0]);
this.rotation = angulo / (Math.PI / 180);
this.x = this.x - velocidade * (Math.cos(angulo));
this.y = this.y - velocidade * (Math.sin(angulo));
var testex:Number = Math.abs(this.x - caminhoCoords[0][0]); //test to see the distance between the ship and the position in the array
var testey:Number = Math.abs(this.y - caminhoCoords[0][1]);
if (testey<=velocidade+2 && testex<=velocidade+2) // if is velocidade+2 close then go to the next coordnate
{
caminhoCoords.shift();
}
}
}
This function draw the line:
private function desenhaCaminho():void //draw the black Path
{
if(caminhoCoords.length>=1)
{
caminho.graphics.clear();
caminho.graphics.lineStyle(1, 0x000000, 1,true);
caminho.graphics.moveTo(caminhoCoords[0][0],caminhoCoords[0][1]);
for (var i:int = 1; i < caminhoCoords.length; i++)
{
caminho.graphics.lineTo(caminhoCoords[i][0], caminhoCoords[i][1]);
}
}else
{
caminho.graphics.clear();
}
}
Every time the ship arrive in one coordinate is take that coordinate off the array and redraw the array.
Is there a better way of doing that?
I believe if you set your registration point of the plane to the centre and use .snapto(path), it will improve the action.
Judging from just the look of the stuttering, I would guess you need to smooth out the "line" a fair bit. It's probably picking up a lot of noise in the line, which is then translated into the rotation of the plane. Either smooth out the rotation/position of the plane, or the line itself.
first time poster here,
I have looked for a solution to this for days to no avail, if this has been asked I beg you to link me as I could not find it. Anyways, here goes:
I am working on a tile based canvas app and having issues with moving the camera. Essentially I want to keep the hero in the middle of the screen unless he comes near and edge. I have tried working with using translating the canvas as the hero moves but had issues with shearing. I ended up reworking my logic and now figure out where to start drawing based on the hero's coordinates and then keep my hero drawn at the center of the canvas, it works well until I go near the edges of the screen.
Here is my current code for drawing the map, leoX and leoY are the absolute coordinates of the hero, the canvas is 600X600
var topLeftX = Math.floor((leoX - 300)/33);
var topLeftY = Math.floor((leoY - 300)/33);
//draw map
for(var rowCtr=topLeftY;rowCtr<mapRows;rowCtr++){
for(var colCtr=topLeftX;colCtr<mapCols;colCtr++){
var tileId = tileMap[rowCtr][colCtr]+ mapIndexOffset;
var mapSourceX = Math.floor(tileId % 8 )*33;
var mapSourceY = Math.floor(tileId / 8 )*33;
context.drawImage(map, mapSourceX, mapSourceY,33,33,(colCtr-topLeftX)*33,(rowCtr- topLeftY)*33,33,33);
}
}
//code to draw leo
context.drawImage(tilesheet, sourceX,sourceY,32,48,300,300,32,48);
//update leo's position
leoX += leoDeltaX;
leoY += leoDeltaY;
EDIT: Link to example is now dead.
when tracing the mouseX / mouseY or localX / localY coordinates of a display object, why does x start at 1 while y starts at 0?
for example, i've drawn a simple 400 x 400 pixel sprite onto the stage with a MouseEvent.MOUSE_MOVE event listener that calls a handler function to trace the local coordinates of the mouse.
the first, top-left pixel returns {x:1, y:0} and the last, bottom-right pixel returns {x:400, y:399}. shouldn't both the x and y start and end with the same value? i'm not sure which makes more sense for a the first mouse coordinate (either 0 or 1) but it certainly doesn't make sense that they are different?
[SWF(width = "1000", height = "600", backgroundColor = "0xCCCCCC")]
import flash.display.Sprite;
import flash.events.MouseEvent;
var darkBlueRect:Sprite = createSprite();
darkBlueRect.x = 23;
darkBlueRect.y = 42;
addChild(darkBlueRect);
darkBlueRect.addEventListener(MouseEvent.MOUSE_MOVE, mouseMoveEventHandler);
function mouseMoveEventHandler(evt:MouseEvent):void
{
trace(darkBlueRect.mouseX, evt.localX, darkBlueRect.mouseY, evt.localY);
}
function createSprite():Sprite
{
var result:Sprite = new Sprite();
result.graphics.beginFill(0x0000FF, 0.5);
result.graphics.drawRect(0, 0, 400, 400);
result.graphics.endFill();
return result;
}
Report a bug, you've found one:
http://bugs.adobe.com/flashplayer/
I thought perhaps it was to make room for a line applied to the sprite among other things but all those tests proved not to be the case. This is, in my opinion, a bug. File it and I'll second it, or if you can't be bothered let me know I'll file it cause it should be fixed.
Update
I've just tried another test where I set the stageScaleMode to allow for scaling, then zoomed in 2-3 times to the object and tried to get a 0/0 reading on MOUSE_DOWN. Just can't be done apparently. I did get a 0 reading on the X finally but then the Y is out. I think this issue may come down to the fact that flash returns X/Y pointer position as a Number and not an int, and you can get decimal values on the pointer position as you'll notice if you're zoomed in. Perhaps it's just buggy code or it comes down to floating point precision issues based on how the decimal points are calculated, or if you're not zoomed in and the object isn't scaled, flash rounds that decimal value off an int and this may also explain the weird behavior. Dunno just guessing, thought I'd add the results of this extra test.