System is CentOS 7 i dont know why the /bin file missing, i cant login with ssh now.
The programs I spent a week making were all inside, no backups.
So this matter is very important to me.
Does anyone know how to restore data from a hard drive to a specific point in time?
Taking snapshots will allow you to backup your data. Now, for the process of recovery you may have a look at this documentation which will guide you in creating an instance with a snapshot taken previously.
If you cannot login via SSH, you may also try to gain access by interacting with serial console. Here are the steps:
1). Activate the “Connect to serial console” button.
Go to VM instances, click on your VM, Edit, and active “enable connecting to serial ports” in the Remote access area and click on save.
2). Create a username and password.
Go to Vm instance, click on your Vm again, Edit, and fill up the custom metadata section with:
In key: startup-script
In value:
#!/bin/bash
sudo useradd -G sudo pamela
sudo echo 'pamela:pamela5' | chpasswd
(This is a script that creates a username : pamela and password: pamela5, which you are going to use later. Please use something else for security purposes)
3). Reboot for changes to take effect.
Related
I'm trying to set up a small blog server on Google Cloud Platform using the free tier f1.micro instance. I'm using Ubuntu 20.04 LTS as the base image (Ubuntu is the only Linux distro that I'm at all familiar with), though I tried 20.10. Everything works normally until I install MySQL. This is the guide that I'm following. After each failure, I deleted the VM and started with a fresh one.
These are the VM settings:
In addition to the steps listed in the guide, I also tried adding ssh to ufw, just in case.
sudo ufw allow ssh
sudo ufw enable
I also tried running this prior to installing MySQL, based on this article after failing the first couple of times.
sudo apt-get purge mysql*
sudo apt-get autoremove
sudo apt-get autoclean
sudo apt-get dist-upgrade
Once I try installing mysql-server the ssh prompt hangs here:
I've tried reconnecting immediately and I've tried waiting overnight, but I always get stuck here when I try to connect again (it stays like this for a very long time before failing):
I experienced a similar issue with a MySQL Instance in GCP, the first issue was related with the type of the VM instance I used, I had a f1-micro machine type on this VM Instance and suddenly I wasn’t able to access the ssh. As this type of VM Instance has only 0.6GB of memory, it became out of memory soon, I changed it to a e2-medium that is value by default and it resolved my problems this time.
As the Instance was out of memory the services in the instance started to fail, it was the reason that I can't access my instance.
At another time I started again with similar issues, but this time, the problem was the disk, I only had 10 GB and there was a process filling my disk, when a partition was out of space, the instance started to fail again.
I only resized my disk, now my instance disk is 20GB and is working fine.
Having said that, I suggest increasing your resources per your convenience to enhance your performance, because to have the problems you described is a good indicator that your existing machine type is not a good fit for your workloads you run on that instance.
So, I suggest to change the machine type to adjust your memory and you can follow the next steps for these tasks please visit the following link to get further information about it.
Changing a machine type
1.- Go to the VM Instances page.
2.- In the Name column, click your instance.
From the instance details page, complete the following steps:
a) Click the Stop button to stop the instance, if you have not stopped it yet.
b) After the instance stops, click the Edit button at the top of the page.
c) Under the Machine configuration section, select the machine type you want to use, or create a custom machine type to increase only the Memory.
d) Save your changes and start again your VM Instance.
You can resize your disk following this guide or with the following command:
gcloud compute disks resize DISK_NAME --size DISK_SIZE
Or with the Console:
Go to the Disks page to see a list of zonal persistent disks in your project.
Click the name of the disk that you want to resize.
On the disk details page, click Edit.
In the Size field, enter the new size for your disk.
Click Save to apply your changes to the disk.
After you resize the disk, you must resize the file system so that the operating system can access the additional space.
Note: Do not resize boot disks beyond 2 TB because this is the limit.
As per the installation guide you need a server with at least 1GB of memory and your selected VM instance has 614MB of memory. If I understand correctly, when Mysql service is installed it has been occupied total memory and that might be the reason you got stuck on that point also not able to SSH the instance.
I have a small instance running in GCE, had some troubles with the MongoDb so after some tries decided to reset the instance. But... it didn't seem to come back online. So i stopped the instance and restarted it.
It is an Bitnami MEAN stack which starts apache and stuff at startup.
But... i can't reach the instance! No SCP, no SSH, no webservice running. When i try to connect via SSH (in GCE) it times out, cant make connection on port 22. In the information it says 'The instance is booting up and sshd is not running yet', which is possible of course.... But i cant reach the instance in no possible manner not even after an hour wait :) Not sure what's happening if i cant connect to it somehow :(
There is some activity in the console... some CPU usage, mostly 0%, some incomming traffic but no outgoing...
I hope someone can give me a hint here!
Update 1
After the helpfull tip form Serhii... if found this in the logs...
Booting from Hard Disk 0...
[ 0.872447] piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
/dev/sda1 contains a file system with errors, check forced.
/dev/sda1: Inodes that were part of a corrupted orphan linked list found.
/dev/sda1: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)
fsck exited with status code 4
The root filesystem on /dev/sda1 requires a manual fsck
Update 2...
So, i need to fsck the drive...
Created a snapshot, made a new disk from that snapshot, added the new disk as an extra disk to another instance. Now that instance wont boot with the same problem... removing the extra disk fixed it again. So adding the disk makes it crash even though it isn't the boot-disk?
First, have a look at the Compute Engine -> VM instances -> NAME_OF_YOUR_VM -> Logs -> Serial port 1 (console) and try to find errors and warnings that could be connected to lack of free space or SSH. It'll be helpful if you updated your post by providing this information. In case if your instance run out of free space follow this instructions.
You can try to connect to your VM via Serial console by following this guide, but keep in mind that:
The interactive serial console does not support IP-based access
restrictions such as IP whitelists. If you enable the interactive
serial console on an instance, clients can attempt to connect to that
instance from any IP address.
more details you can find in the documentation.
Have a look at the Troubleshooting SSH guide and Known issues for SSH in browser. In addition, Google provides a troubleshooting script for Compute Engine to identify issues with SSH login/accessibility of your Linux based instance.
If you still have a problem try to use your disk on a new instance.
EDIT It looks like your test VM is trying to boot from the disk that you created from the snapshot. Try to follow this guide.
If you still have a problem, you can try to recreate the boot disk from a snapshot to resize it.
WAMPServer won't start up any services for some reason (worked fine until 2 weeks ago -- nothing I can think of that changed, though wouldn't be surprised if Windows 10 forced some update) so I'm planning to uninstall and then reinstall. Before I do, I want to backup my content so that I can restore it once I get the new version installed from scratch.
I have already zipped the wamp64\www folder and now I'm trying to do mysqldump, but MySQL won't even start.
My question has two parts:
How can I start MySQL service on Windows 10 home (no group policies or any such in-depth admin capabilities) when it will not start? I've tried opening services.msc and manually restarting -- it just doesn't do anything. There is no error.
Is there a way to save all my MySQL databases in one go without launching MySQL?
On my system database they are stored in C:\Program Files (x86)\WampServer\bin\mysql\mysql5.1.53\data.
You can try to start mysql locally with an executable on wamp\bin\mysql\mysql-version\bin.
Maybe your wampp won't start because another application is using the same port?
You can view running port on Command Prompt with:
C:\> netstat -a -b
-a This switch displays active TCP connections, TCP connections with the listening state, as well as UDP ports that are being listened to.
-b This netstat switch is very similar to the -o switch listed below, but instead of displaying the PID, will display the process's actual file name. Using -b over -o might seem like it's saving you a step or two but using it can sometimes greatly extend the time it takes netstat to fully execute.
You can search a specific port with :
netstat -aon | find "[PORT]"
-o A handy option for many troubleshooting tasks, the -o switch displays the process identifier (PID) associated with each displayed connection. See the example below for more about using netstat -o.
-n Use the -n switch to prevent netstat from attempting to determine host names for foreign IP addresses. Depending on your current network connections, using this switch could considerably reduce the time it takes for netstat to fully execute.
More Information
Background: I used to develop using MAMP and over the months/years I've accumulated a large mysql database (a few gigs) that I use for development for my different projects. I finally got around to setting up a VM using Vagrant and I've gotten everything set up and working nicely except my database. I'm running a CentOS 6.5 guest box on an OSX host.
My problem: I need my database to be completely persistent so I can vagrant up/destroy as many boxes as I need to, but the mysql persists.
My solution #1: I initially mounted a synced folder using vboxsf. This works pretty well and seems to be my best option so far, but performance is pretty bad. Query-intensive pages on my dev sites take 1-3 seconds to load whereas they might normally take under a second to load.
My solution #2: I then tried mounting a synced folder using nfs because the performance should be much better. The issue here is that mysql complains b/c, given the nature of nfs, it can't chown the data directory to the mysql:mysql user. I get the following errors when trying to start up the mysqld service:
chown: changing ownership of '/www/mysql': Operation not permitted
chmod: changing permissions of '/www/mysql': Permission denied
Sooo, my question is: are there any better ways to accomplish what I need? I feel like NFS would be the best solution, but I don't know how to get around the whole ownership/permission issues automatically with Vagrant. Any help would be appreciated.
I had the same issue or requirement for my local dev on Mac. And I found a solution for a MySQL-only Vagrant box with external data linked as folder_sync. But it'll run on Win too I guess.
Here is the Vagrant box config: https://github.com/ronnyhartenstein/vagrant-mysql-shared-folder
And if you understand German, here is my blog article with some background infos and tests (and fails of course): http://blog.rh-flow.de/2014/11/11/es-hat-sich-ausgemampft-vagrant-ist/
First of all, let me start with saying this is not best practice. You may know yourself that this can lead to problems if e.g. your PC goes blank or you want to give one project to another person for development. Of course, especially as a one-person-endevour, there are more important things than having test data importers and stuff :) So let's look for solutions.
NFS Permissions
To get NFS permissions right, your users need to have the same UID and GUID on host and guest. It's pretty tricky to setup and you should not change it from the guest. Maybe you can change it on the host to make it writeable to mysql and make UID and GUID the same. Of course, the moment the host changes this won't work anymore.
rsync shared folder
Rsync might not be the fastest in terms of syncing, but if you create on rsync shared folder where only MySQL is writing and which syncs back to some folder on your host this might be a solution. The "real" projects could still live inside a virtualbox share or nfs and you don't need to bother with correct permissions.
There might be some other solutions as well:
Create a backup/restore strategy
One way to go would be to backup MySQL inside your vagrant box at various points, e.g. every day. You could also run the backup when the box is shut down, thus creating a backup right before you destroy the box. Placing this backup at a shared folder, you'd have up-to-date data in case you destroy a box. Performance should be pretty good as the data MySQL is using wouldn't be on a shared folder.
Run MySQL on host or other vagrant box
It's of course possible to connect from within your vagrant box to your host or another vagrant box which runs MySQL. Your host or this box could be long-lived and could serve as a central "MySQL Server" for all your projects.
Have a MySQL slave running on the same machine which writes to shared folder
I believe with MySQL a master/slave combination is possible. Running both on one machine with the master (which you use in your projects) living inside your vm and not writing anything to a shared folder and a slave which writes to your shared folder and is a mirror of your master. This would mean that you have high performance and a few secs of delay between writing something and having it written to your shared folder. Of course, keeping this setup running and making sure it works all the time can be tricky.
You can use bindfs for changing the user/group of a share. I'm actually using a plugin called vagrant-bindfs which let's you remount a share with different ownerships. It works, but i haven't tried it with mysql to see how it performs.
Relevant lines on my Vagrantfile:
unless Vagrant.has_plugin?("vagrant-bindfs")
raise 'vagrant-bindfs is not installed! Please install with vagrant plugin install vagrant-bindfs'
end
config.vm.synced_folder "../", "/temp-nfs-mounts/sites-unbinded", type: :nfs
config.bindfs.bind_folder "/temp-nfs-mounts/sites-unbinded", "/sites", :force_user => "vagrant", :force_group => "vagrant", :create_as_user => true
I just created a free php gear...
Is the instance automatically configured to roll logs and delete old logs (to make sure we dont go over disk quota?)
Can you pls tell me how often logs are rolled and when old ones get deleted?
thanks
At this moment (April 2014), Apache RotateLogs does not seem to be used anymore. This commit seems to have changed to use logshifter, which reportedly seems to default to rotating every 10MB with a max of 10 log files.
So, to answer your question, it seems like things are automatically configured to roll logs and delete old logs to prevent us from going over disk quota.
BTW, the new logshifter setup combines the access_log and error_log into one log file instead of keeping them separate.
At this moment (Feb 2014), all OpenShift Apache-based cartridges use Apache RotateLogs program to rotate logs every midnight:
/usr/sbin/rotatelogs <gear-dir>/php/logs/access_log-%Y%m%d-%H%M%S-%Z 86400
The log files are not deleted automatically. However, you can delete them manually using rhc app-tidy <app> command. (Read more about rhc tools.)
If concerned about logs eating all your gear capacity, you might consider using monit community cartridge to trigger automatic email notifications when the app hits 80% of gear storage quota, or to tidy your app automatically. If you already created your app, you can add the monit cartridge with the following commands:
rhc env set MONIT_ALERT_EMAIL=my#email.com -a YOUR_APP
rhc cartridge-add http://goo.gl/jiIB2C -a YOUR_APP
And last but not least, feel free to open a new bug report or new feature request for OpenShift.