According to this doc: https://docs.adyen.com/developers/marketpay/marketpay-overview
Supported countries (12)
MarketPay is currently available for the following countries: Austria, Belgium, Finland, France, Germany, Ireland, Italy, the Netherlands, Portugal, Spain, the United Kingdom (including Isle of Man & Jersey), and the United States.
According to this: https://www.adyen.com/our-solution/online-payments/marketplaces
Payout 25+ countries
Which is correct and where can I see the list?
The difference here is what MarketPay supports vs the functionality of paying-out.
MarketPay includes functionality like KYC/Customer verification, funds management, as well as payout. This set of functionality is currently available in the 12 countries mentioned in the MarketPay documentation overview.
For the payout to 25+ countries, this is referencing the functionality of paying out to a bank account or card, independent of the MarketPay solution. This is represented in the docs under the third party payouts documentation
Related
I'm working on a project to map out the legislators who represent students. We're looking in Virginia, and we've run into a few issues with normal addresses. Here's an example:
112 Howard St, Floyd, VA, 24091 returns data going all the way down to the county level, but doesn't include state representatives. Google's even normalizing the address (including the "SE" at the end of "112 Howard St") - so I know that it's looking in the right location.
I've double-checked the data against the official records on the Virginia Assembly website (https://whosmy.virginiageneralassembly.gov/) and this address should (currently) list L. Nick Rush as state delegate and David R. Suetterlein as state senator - and the boundaries (on the Virginia General Assembly site above) for their districts put this address right in the middle.
I'm at a loss here - does anyone have suggestions?
Is there any way to add different styles for columns made with column-count? I have a div which is divided into multiple columns using column-count. At a time only two columns are visible on page. I need to add margin-left to the first column and margin-right for the second column and so on.
What I need is the same spacing on both (outer and inner) sides of the pages just like book.
.main {
overflow: scroll;
width: 100%;
height: 438px;
column-gap: 160px;
columns: 2 auto;
column-fill: auto;
margin-top: 5px;
}
<div class="main">
Wikidata is a free, collaborative, multilingual, secondary database, collecting structured data to provide support for Wikipedia, Wikimedia Commons, the other wikis of the Wikimedia movement, and to anyone in the world. What does this mean? Let's look
at the opening statement in more detail: Contents 1 What does this mean? 2 How does Wikidata work? 2.1 The Wikidata repository 2.2 Working with Wikidata 3 Where to get started 4 How can I contribute? 5 There is more to come Free. The data in Wikidata
is published under the Creative Commons Public Domain Dedication 1.0, allowing the reuse of the data in many different scenarios. You can copy, modify, distribute and perform the data, even for commercial purposes, without asking for permission. Collaborative.
Data is entered and maintained by Wikidata editors, who decide on the rules of content creation and management. Automated bots also enter data into Wikidata. Multilingual. Editing, consuming, browsing, and reusing the data is fully multilingual. Data
entered in any language is immediately available in all other languages. Editing in any language is possible and encouraged. A secondary database. Wikidata records not just statements, but also their sources, and connections to other databases. This
reflects the diversity of knowledge available and supports the notion of verifiability. Collecting structured data. Imposing a high degree of structured organization allows for easy reuse of data by Wikimedia projects and third parties, and enables
computers to process and “understand” it. Support for Wikimedia wikis. Wikidata assists Wikipedia with more easily maintainable information boxes and links to other languages, thus reducing editing workload while improving quality. Updates in one language
are made available to all other languages. Anyone in the world. Anyone can use Wikidata for any number of different ways by using its application programming interface. How does Wikidata work? This diagram of a Wikidata item shows you the most important
terms in Wikidata. Wikidata is a central storage repository that can be accessed by others, such as the wikis maintained by the Wikimedia Foundation. Content loaded dynamically from Wikidata does not need to be maintained in each individual wiki project.
For example, statistics, dates, locations and other common data can be centralized in Wikidata. The Wikidata repository Items and their data are interconnected. The Wikidata repository consists mainly of items, each one having a label, a description
and any number of aliases. Items are uniquely identified by a Q followed by a number, such as Douglas Adams (Q42). Statements describe detailed characteristics of an Item and consist of a property and a value. Properties in Wikidata have a P followed
by a number, such as with educated at (P69). For a person, you can add a property to specifying where they were educated, by specifying a value for a school. For buildings, you can assign geographic coordinates properties by specifying longitude and
latitude values. Properties can also link to external databases. A property that links an item to an external database, such as an authority control database used by libraries and archives, is called an identifier. Special Sitelinks connect an item
to corresponding content on client wikis, such as Wikipedia, Wikibooks or Wikiquote. All this information can be displayed in any language, even if the data originated in a different language. When accessing these values, client wikis will show the
most up-to-date data. Item Property Value Q42 P69 Q691283 Douglas Adams educated at St John's College Working with Wikidata There are a number of ways to access Wikidata using built-in tools, external tools, or programming interfaces. Wikidata Query
and Reasonator are some of the popular tools to search for and examine Wikidata items. The tools page has an extensive list of interesting projects to explore. Client wikis can access data for their pages using a Lua Scribunto interface. You can retrieve
all data independently using the Wikidata API. Where to get started The Wikidata tours designed for new users are the best place to learn more about Wikidata. Some links to get started: Set your user options, especially the 'Babel' extension, to choose
your language preferences Help with missing labels and descriptions Help with interwiki conflicts and constraint violations Improve a random item Help translating How can I contribute? Go ahead and start editing. Editing is the best way to learn about
the structure and concepts of Wikidata. If you would like to gain understanding of Wikidata's concepts upfront, you may want to have a look at the help pages. If you have questions, please feel free to drop them in the project chat or contact the development
team. There is more to come Wikidata is an ongoing project that is under active development. More data types as well as extensions will be available in the future. You can find more information about Wikidata and its ongoing development on the Wikidata
page on Meta. Subscribe to the the Wikidata mailing list to receive up-to-date information about the development and to participate in discussions about the future of the project. North Korea conducted its sixth nuclear test on 3 September 2017, according
to Japanese and South Korean officials. The Japanese Ministry of Foreign Affairs also concluded that North Korea conducted a nuclear test.[6] The United States Geological Survey reported an earthquake of 6.3-magnitude not far from North Korea's Punggye-ri
nuclear test site.[7] South Korean authorities said the earthquake seemed to be artificial, consistent with a nuclear test.[6] The USGS, as well as China's earthquake administration, reported that the initial event was followed by a second, smaller,
earthquake at the site, several minutes later, which was characterized as a collapse of the cavity.[8][9] North Korea claimed that it detonated a hydrogen bomb that can be loaded on to an intercontinental ballistic missile (ICBM) with great destructive
power.[10] Photos of North Korean leader Kim Jong-un inspecting a device resembling a thermonuclear weapon warhead were released a few hours before the test.[11] Contents 1 Yield estimates 2 Reactions 3 See also 4 References Yield estimates According
to estimates of Kim Young-Woo, the chief of the South Korean parliament's defense committee, the nuclear yield was equivalent to about 100 kilotons of TNT (100 kt). "The North's latest test is estimated to have a yield of up to 100 kilotons, though
it is a provisional report," Kim Young-Woo told Yonhap News Agency.[2] On 3 September, South Korea’s weather agency, the Korea Meteorological Administration, estimated that the nuclear blast yield of the presumed test was between 50 to 60 kilotons.[3]
On 4 September, the academics from University of Science and Technology of China[12] have released their findings based on seismic results and concluded that the Nuclear Test Location is at 41°17′53.52″N 129°4′27.12″E on 03:30 UTC which is only a few
hundred meters apart from the previous 4 tests (2009, 2013, January 2016 and September 2016) with the estimated yield at 108.1 ± 48.1 kt. In contrast, the independent seismic monitoring agency NORSAR estimated that the blast had a yield of about 120
kilotons, based on a seismic magnitude of 5.8.[4] The Federal Institute for Geosciences and Natural Resources in Germany estimates a higher yield at "a few hundred kilotons" based on a detected tremor of 6.1 magnitude.[5] Reactions South Korea, China,
Japan, Russia and members of the ASEAN[13] voiced strong criticism of the nuclear test.[14] US President Donald Trump tweeted "North Korea has conducted a major Nuclear Test. Their words and actions continue to be very hostile and dangerous to the United
States".[15][16] Trump was asked whether the US would attack North Korea and replied, "We'll see".[17] On September 3, U.S. Defense Secretary James Mattis warned North Korea, saying that the country would be met with a "massive military response" if
it threatened the United States or its allies.[18] The United Nations Security Council will meet in an open emergency meeting on September 4, 2017 at the request of the US, South Korea, Japan, France and the UK.[19] Federal Institute for Geosciences
and Natural Resources From Wikipedia, the free encyclopedia (Redirected from Bundesanstalt für Geowissenschaften und Rohstoffe) Federal Institute for Geosciences and Natural Resources Bundesanstalt für Geowissenschaften und Rohstoffe (BGR) Agency overview
Headquarters Hanover, Germany Employees 795 in 2013 Website www.bgr.bund.de The Federal Institute for Geosciences and Natural Resources (Bundesanstalt für Geowissenschaften und Rohstoffe or BGR) is a German agency within the Federal Ministry of Economics
and Technology. It acts as a central geoscience consulting institution for the German federal government.[1] The headquarters of the agency is located in Hanover and there is a branch in Berlin. Early 2013, the BGR employed a total of 795 employees.
The BGR, the State Authority for Mining, Energy and Geology and the Leibniz Institute for Applied Geophysics form the Geozentrum Hanover. All three institutions have a common management and infrastructure, and complement each other through their interdisciplinary
expertise.
</div>
Here is the JSFiddle for testing link
As the question title states, I need the crime data from all the united states. I can't find a dataset for that, only numerous small ones for the different cities and countrysides.
Is there such a united API or should I maintain these small ones as well ?
There is currently no single open dataset or API (Socrata maintained or otherwise) that covers the US completely. Many cities publish crime reports to their open data portals, but the coverage is still pretty sparse.
There's also the FBI Uniform Crime Reporting datasets, but those are aggregated at the city level (which again is somewhat sparse) and the most recent data is a partial update from the first half of 2015.
I am new to Google Earth / Maps and programming in general.
I am working on a project that must display/list the 1st Level Admin Names (States/Province) of each country of the world from Google Earth / Maps.
Is there a file that is accessible that would list the 1st Level Admin Names (States/Province) in the 43 languages that Google Earth offers?
Obtaining the file of all the 1st Level Admin Names (States/Province) in the different languages would save me a lot of time and effort.
There are two main sets of countries and theis subdivisions. One is the ISO3166 standard and the other is the list provided by United Nations. They are the two most widely used standards worldwide:
ISO 3166 - International Standard for countries and subdivisions (
base:
http://www.iso.org/iso/home/standards/country_codes.htm;
txt file with the countries: http://www.iso.org/iso/home/standards/country_codes/country_names_and_code_elements_txt.htm );
UN Multilingual, multiscriptual dataset of names of countries, capitals and major cities ( http://unstats.un.org/unsd/geoinfo/geonames/Default.aspx ).
I'm afraid you will need to pay for the ISO of all countries subdivisions.
But the UN data you can download for free. They also provide other databases on their websites.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
We don’t allow questions seeking recommendations for books, tools, software libraries, and more. You can edit the question so it can be answered with facts and citations.
Closed 8 years ago.
Improve this question
U.K. sites that require addresses often ask the user to provide a postcode. The site then offers the user a choice between the different addresses that match that postcode.
How can I match a postcode to a street address?
Quick comparison:
Ideal Postcodes - https://ideal-postcodes.co.uk has an package on npm and reasonably priced. Gives address as individual parts as well as a single string, which can be useful for filling out a form as individual bits (and allowing people to customise).
getAddress - http://getaddress.io - also reasonably priced. Gives results as a single string only, rather than the broken down components - whether this is better or worse really depends on the situation.
PostCode Anywhere - http://www.postcodeanywhere.co.uk/ - used by lots of large household names but much more expensive than other solutions. You can get up to 50 JSON API calls a day directly though - see How do I look up a UK address based on house number and postcode?
Get the PAF file yourself http://poweredbypaf.com - this is incredibly expensive.
I believe you need the Royal Mail Postcode Address File. From that link:
PAF is the only complete source of all
known UK Postcodes.
Services do exist to handle requests for this info, such that it may be cheaper to use such services for small numbers of requests (obviously you have issues as and when such services aren't available for whatever reasons).
The only way to do it officially up to now has been to buy the Postcode Address File however there was a news item recently that the data may be free in 2010 so depends if you can wait!
Contrary to the answers here, you do NOT need the very expensive PAF from the Post Office. There are a number of commercial services (presumably powered by the PAF) that return the streets and street numbers for a specified post code. They generally charged on a per-request basis. I do not have any experience with a particular vendor, but this is an example - capscan
To do this you need access to the Postcode Address File - this is something that is licensed for use on an annual basis from the post-office, usually via a third party.
You have a choice depending on your needs of buying a package to use locally or of using web services.
The Royal Mail's page is here: http://www.royalmail.com/portal/rm/jump2?mediaId=400085&catId=400084 and on that page are links to service providers.
Postcode Anywhere is one of the providers out there (one of my clients uses them with no complaints). Licensing is flexible:
Postcode Anywhere UK Address Finder
You can use a geocoding service, such as the one provided by Google.
Physical Address to GeoLocation UK
If you want to get the approximate address for a UK postcode (i.e. street level) there is a way you can do it legally and for free without using PAF data.
Geocode the postcode - This can be done legally for free now. OS have released the codepoint database into the public domain
Do a reverse lookup on the WGS84 lat/lng pair using the Google Maps HTTP Geocoding API to get the street address
As an example of this take a look at this XML Web Service:
http://geo.jamiethompson.co.uk/W127RJ.xml
explained at:
http://jamiethompson.co.uk/projects/2010/04/30/an-open-free-uk-postcode-geocoding-web-service/
which returns:
<result>
<status>200</status>
<message/>
<postcode>W12 7RJ</postcode>
<geo>
<os_x>523180</os_x>
<os_y>180541</os_y>
<lat>51.510379</lat>
<lng>-0.226376</lng>
<landranger>TQ231805</landranger>
<accuracy>1</accuracy>
<key>UO1NV-4UO8</key>
</geo>
<address>
<street>White City Close</street>
<locality>Hammersmith</locality>
<district>Hammersmith</district>
<county>Greater London</county>
</address>
It's not as handy as the commercial offerings which give you a full list of actual addresses for any given postcode, but it lets you do a "What's your postcode? What's your house number?" type system.
You can either use the PAF or one of the commercial web services (there are a few) which licence the PAF. I think you usually buy "credits" or pay a flat rate for unlimited access.
To add to the answers already coming through:
In the paid for products typically you pay for either:
premise level - more detailed and can offer the user a list of premises at that postcode location
street level - simply matches the street at that postcode location - you or your user fills in "the first line of the address" usually house name or number
I believe this differentiation is built into the licencing by the Royal Mail at source. Premise level is substantially more expensive
If you're adding it into a website shopping cart or similar system, you can buy access to the data on a per-click basis. If you're using it for an internal system such as CRM, you need to buy a per-user license.
Either way, you can use the Data8 Postcode Lookup API via web services.
You don't need to purchase the Royal Mail Postcode Address File (PAF). There are lots of APIs available.
getaddress.io is the only one I've found that has a free plan:
https://getaddress.io