I am trying to show the "sgv" value on a Dashing / Smashing dashboard widget. Ultimately I would also like to show the "direction" value as well. I am running into problems pulling that precise value down which changes every 3 to 5 minutes. I have already been able to mirror the exact string using the following:
require 'net/http'
require 'rest-client'
require 'json'
url = "https://dnarnianbg.herokuapp.com/api/v1/entries/current.json"
response = RestClient.get(url)
JSON.parse(response)
# :first_in sets how long it takes before the job is first run. In this case, it is run immediately
current_nightscout = 0
SCHEDULER.every '5m' do
last_nightscout = current_nightscout
current_nightscout = response
send_event('nightscout', { current: current_nightscout, last: last_nightscout })
end
I have also searched the archives several times. I don't wish to write this to a file like this one shows and the duplicate question has been deleted or moved.
I realize that the JSON.parse(response) is just going to parse out whatever I tell it the response equals, but I don't know how to get that response to equal SGV. Maybe the solution isn't in the RestClient, but that is where I am lost.
Here is the JSON URL: http://dnarnianbg.herokuapp.com/api/v1/entries/current.json
EDIT: The output of that link is something like this:
[{"_id":"5ba295ddb8a1ee0aede71822","sgv":87,"date":1537381813000,"dateString":"2018-09-19T18:30:13.000Z","trend":4,"direction":"Flat","device":"share2","type":"sgv"}]
You need something like response[0]["sgv"] which should return 52 if you end up with many items in the list you will need to iterate over them.
The best thing you can do is to break your problem down into easier parts to debug. As you are having problems accessing some JSON via an API you should make a simple script which only does the function you want in order to test it and see where the problem is.
Here is a short example you can put into a .rb file and run;
#!/usr/bin/ruby
require 'open-uri'
require 'json'
test = JSON.parse(open("https://dnarnianbg.herokuapp.com/api/v1/entries/current.json", :read_timeout => 4).read)
puts test[0]["sgv"]
That should return the value from sgv
I realise that short sweet example may be little use as a learner so here is a more verbose version with some comments;
#!/usr/bin/ruby
require 'open-uri'
require 'json'
# Open the URL and read the result. Time out if this takes longer then 4 sec.
get_data = open("https://dnarnianbg.herokuapp.com/api/v1/entries/current.json", :read_timeout => 4).read
# Parse the response (get_data) to JSON and put in variable output
output = JSON.parse(get_data)
# Put the output to get the 'sgv figure'
p output[0]["sgv"]
It always pays to manually examine the data you get back, in your case the data looks like this (when make pretty)
[
{
"_id": "5ba41a0fb8a1ee0aedf6eb2c",
"sgv": 144,
"date": 1537481109000,
"dateString": "2018-09-20T22:05:09.000Z",
"trend": 4,
"direction": "Flat",
"device": "share2",
"type": "sgv"
}
]
What you actually have is an Array. Your server returns only 1 result, numbered '0' hence you need [0] in your p statement. Once you have accessed the array id then you can simply use the object you need as [sgv]
If your app ever returns more than one record then you will need to change your code to read all of the results and iterate over them in order to get all the values you need.
Here is the final code that made it work
require 'net/http'
require 'json'
require 'rest-client'
# :first_in sets how long it takes before the job is first run. In this case, it is run immediately
current_nightscout = 0
SCHEDULER.every '1m' do
test = JSON.parse(open("https://dnarnianbg.herokuapp.com/api/v1/entries/current.json", :read_timeout => 4).read)
last_nightscout = current_nightscout
current_nightscout = p test[0]["sgv"]
send_event('nightscout', { current: current_nightscout, last: last_nightscout })
end
I can probably eliminate require 'rest-client' since that is no longer being used, but it works right now and that is all that matters.
Related
Im trying to make a command that will store name,description and image of a character and another command to retrieve that data in an embed,but i have trouble working with json files
this is my code to add them:
#client.command()
async def addskillset(ctx):
await ctx.send("Let's add this skillset!")
questions = ["What is the monster name?","What is the monster description?","what is the monster image link?"]
answers = []
#code checking the questions results
embedkra = nextcord.Embed(title = f"{answers[0]}", description = f"{answers[1]}",color=ctx.author.color)
embedkra.set_image(url = f"{answers[2]}")
mess = await ctx.reply(embed=embedkra,mention_author=False)
await mess.add_reaction('✅')
await mess.add_reaction('❌')
def check(reaction, user):
return user == ctx.author and (str(reaction.emoji) == "✅" or "❌")
try:
reaction, user = await client.wait_for('reaction_add', timeout=1000.0, check=check)
except asyncio.TimeoutError:
#giving a message that the time is over
else:
if reaction.emoji == "✅":
monsters = await get_skillsets_data() #this data is added at the end
if str(monster_name) in monsters:
await ctx.reply("the monster is already added")
else:
monsters[str(monster_name)]["monster_name"] = {}
monsters[str(monster_name)]["monster_name"] = answers[0]
monsters[str(monster_name)]["monster_description"] = answers[1]
monsters[str(monster_name)]["monster_image"] = answers[2]
with open('skillsets.json','w') as f:
json.dump(monsters,f)
await mess.delete()
await ctx.reply(f"{answers[0]} successfully added to the list")
Code to get the embed with the asked info:
#client.command()
async def skilltest(ctx,*,monster_name):
data = open('skillsets.json').read()
data = json.loads(data)
if str(monster_name) in data:
name = data["monster_name"]
description = data["monster_description"]
link = data["monster_image"]
embedkra = nextcord.Embed(title = f"{name}", description = f"{description}",color=ctx.author.color)
embedkra.set_image(url = f"{link}")
await ctx.reply(embed=embedkra,mention_author=False)
else:
# otherwise, it is still None meaning we didn't find it
await ctx.reply("monster not found",mention_author=False)
and my json should look like this:
{"katufo": {"monster_name": "Katufo","Monster_description":"Katufo is the best","Monster_image":"#image_link"},
"armor claw":{"monster_name": "Armor Claw","Monster_description":"Armor claw is the best","Monster_image":#image_link}}
The get_skillsets_data used in first command:
async def get_skillsets_data():
with open('skillsets.json','r') as f:
monsters = json.load(f)
return monsters
Well, When you are trying to retrieve data from your json file try using name = data["katufo"]["monster_name"] now here it will only retrieve monster_name of key katufo. If You want to retrieve data for armor claw code must go like this name = data["armor claw"]["monster_name"]. So try this code :
#client.command()
async def skilltest(ctx,*,monster):
data = open('skillsets.json').read()
data = json.loads(data)
if str(monster) in data:
name = data[f"monster"]["monster_name"]
description = data[f"monster"]["Monster_description"]
link = data[f"monster"]["Monster_image"]
embedkra = nextcord.Embed(title = f"{name}", description = f"{description}",color=ctx.author.color)
embedkra.set_image(url = f"{link}")
await ctx.reply(embed=embedkra,mention_author=False)
else:
# otherwise, it is still None meaning we didn't find it
await ctx.reply("monster not found",mention_author=False)
Hope this works for you :)
If your json looks like what you showed above,
{
"katufo":{
"monster_name":"Katufo",
"Monster_description":"Katufo is the best",
"Monster_image":"#image_link"
},
"armor claw":{
"monster_name":"Armor Claw",
"Monster_description":"Armor claw is the best",
"Monster_image":"#image_link"
}
}
then there is no data["monster_name"] the two objects inside of your JSON are named katufo and armor_claw. To get one of them you can simply write data['katufo']['monster_name'] or data.katufo.monster_name.
Your problem stems from looking up the monster name like this:
if str(monster_name) in data:
name = data["monster_name"]
description = data["monster_description"]
link = data["monster_image"]
What you could do instead is loop through data, as it contains several monsters and then on each object, to the check that you do:
for monster in data:
if str(monster_name) in monster.values():
name = monster.monster_name
description = monster.Monster_description
link = monster.Monster_image
One thing to think about, the way the variables are named is not something I personally recommend. Don't be afraid of adding longer descriptive names so things make more sense for you in the code. Also, in the JSON you provided, there are certain attributes starting with a capital letter, something you should think about.
Edit:
Dicts in python are the equivalent of objects in Javascript and are initialized using the same syntax which we can see below:
monster_data = {}
But since you want a specific structure on these monsters we can go further and create a function called add_monster_object():
def add_monster_object(original_dict, new_monster):
new_monster = {
"monster_name": '',
"monster_description": '',
"monster_image": ''
}
#Now we have a new empty object with the correct names.
return original_dict.update(new_monster)
Now every time you run this function with a given name, in the dict there will be an object with that name. Example is if user writes armor_sword as the monster_name attribute, then we can call the function above as add_monster_object(original_dict, monster_name).
This will, if we take your initial dict as an example, return this:
{
"katufo":{
"monster_name":"Katufo",
"Monster_description":"Katufo is the best",
"Monster_image":"#image_link"
},
"armor claw":{
"monster_name":"Armor Claw",
"Monster_description":"Armor claw is the best",
"Monster_image":"#image_link"
},
"armor sword":{
"monster_name":"",
"monster_description":"",
"monster_image":""
}
}
Then you can populate them as you want, or update the function to take more parameters. The important part here is that you take a minute and figure out what you want to keep saved. Then make sure that you can read and write from file and you should have a somewhat simple structure going. Warning: This isn't a slap and dry method, you will also have to think about special cases, such as adding an object that already exists and soforth.
If you decide to go with Replit you could use their database to create similar functionality but you wouldn't have to worry about reading and writing to a file.
As it is right now, I still think you need to proceed with your bot, add some of the changes that I mentioned before the next actual problem arrives as there are many things that arent quite right. I also suggest you break everything into managing parts, 1 would be to read from a file. 2 would be to write. 3 to write a dict to a file. 4 to update a dict and soforth. Good luck!
I want to append multiple list items to a JSON file, but it creates a list within a list, and therefore I cannot acces the list from python. Since the code is overwriting existing data in the JSON file, there should not be any list there. I also tried it by having just an text in the file without brackets. It just creates a list within a list so [["x", "y","z"]] instead of ["x", "y","z"]
import json
filename = 'vocabulary.json'
print("Reading %s" % filename)
try:
with open(filename, "rt") as fp:
data = json.load(fp)
print("Data: %s" % data)#check
except IOError:
print("Could not read file, starting from scratch")
data = []
# Add some data
TEMPORARY_LIST = []
new_word = input("give new word: ")
TEMPORARY_LIST.append(new_word.split())
print(TEMPORARY_LIST)#check
data = TEMPORARY_LIST
print("Overwriting %s" % filename)
with open(filename, "wt") as fp:
json.dump(data, fp)
example and output with appending list with split words:
Reading vocabulary.json
Data: [['my', 'dads', 'house', 'is', 'nice']]
give new word: but my house is nicer
[['but', 'my', 'house', 'is', 'nicer']]
Overwriting vocabulary.json
So, if I understand what you are trying to accomplish correctly, it looks like you are trying to overwrite a list in a JSON file with a new list created from user input. For easiest data manipulation, set up your JSON file in dictionary form:
{
"words": [
"my",
"dad's",
"house",
"is",
"nice"
]
}
You should then set up functions to separate your functionality to make it more manageable:
def load_json(filename):
with open(filename, "r") as f:
return json.load(f)
Now, we can use those functions to load the JSON, access the words list, and overwrite it with the new word.
data = load_json("vocabulary.json")
new_word = input("Give new word: ").split()
data["words"] = new_word
write_json("vocabulary.json", data)
If the user inputs "but my house is nicer", the JSON file will look like this:
{
"words": [
"but",
"my",
"house",
"is",
"nicer"
]
}
Edit
Okay, I have a few suggestions to make before I get into solving the issue. Firstly, it's great that you have delegated much of the functionality of the program over to respective functions. However, using global variables is generally discouraged because it makes things extremely difficult to debug as any of the functions that use that variable could have mutated it by accident. To fix this, use method parameters and pass around the data accordingly. With small programs like this, you can think of the main() method as the point in which all data comes to and from. This means that the main() function will pass data to other functions and receive new or edited data back. One final recommendation, you should only be using all capital letters for variable names if they are going to be constant. For example, PI = 3.14159 is a constant, so it is conventional to make "pi" all caps.
Without using global, main() will look much cleaner:
def main():
choice = input("Do you want to start or manage the list? (start/manage)")
if choice == "start":
data = load_json()
words = data["words"]
dictee(words)
elif choice == "manage":
manage_list()
You can use the load_json() function from earlier (notice that I deleted write_json(), more on that later) if the user chooses to start the game. If the user chooses to manage the file, we can write something like this:
def manage_list():
choice = input("Do you want to add or clear the list? (add/clear)")
if choice == "add":
words_to_add = get_new_words()
add_words("vocabulary.json", words_to_add)
elif choice == "clear":
clear_words("vocabulary.json")
We get the user input first and then we can call two other functions, add_words() and clear_words():
def add_words(filename, words):
with open(filename, "r+") as f:
data = json.load(f)
data["words"].extend(words)
f.seek(0)
json.dump(data, f, indent=4)
def clear_words(filename):
with open(filename, "w+") as f:
data = {"words":[]}
json.dump(data, f, indent=4)
I did not utilize the load_json() function in the two functions above. My reasoning for this is because it would call for opening the file more times than needed, which would hurt performance. Furthermore, in these two functions, we already need to open the file, so it is okayt to load the JSON data here because it can be done with only one line: data = json.load(f). You may also notice that in add_words(), the file mode is "r+". This is the basic mode for reading and writing. "w+" is used in clear_words(), because "w+" not only opens the file for reading and writing, it overwrites the file if the file exists (that is also why we don't need to load the JSON data in clear_words()). Because we have these two functions for writing and/or overwriting data, we don't need the write_json() function that I had initially suggested.
We can then add to the list like so:
>>> Do you want to start or manage the list? (start/manage)manage
>>> Do you want to add or clear the list? (add/clear)add
>>> Please enter the words you want to add, separated by spaces: these are new words
And the JSON file becomes:
{
"words": [
"but",
"my",
"house",
"is",
"nicer",
"these",
"are",
"new",
"words"
]
}
We can then clear the list like so:
>>> Do you want to start or manage the list? (start/manage)manage
>>> Do you want to add or clear the list? (add/clear)clear
And the JSON file becomes:
{
"words": []
}
Great! Now, we implemented the ability for the user to manage the list. Let's move on to creating the functionality for the game: dictee()
You mentioned that you want to randomly select an item from a list and remove it from that list so it doesn't get asked twice. There are a multitude of ways you can accomplish this. For example, you could use random.shuffle:
def dictee(words):
correct = 0
incorrect = 0
random.shuffle(words)
for word in words:
# ask word
# evaluate response
# increment correct/incorrect
# ask if you want to play again
pass
random.shuffle randomly shuffles the list around. Then, you can iterate throught the list using for word in words: and start the game. You don't necessarily need to use random.choice here because when using random.shuffle and iterating through it, you are essentially selecting random values.
I hope this helped illustrate how powerful functions and function parameters are. They not only help you separate your code, but also make it easier to manage, understand, and write cleaner code.
I want to parse a string of complex JSON in Pig. Specifically, I want Pig to understand my JSON array as a bag instead of as a single chararray. I found that complex JSON can be parsed by using Twitter's Elephant Bird or Mozilla's Akela library. (I found some additional libraries, but I cannot use 'Loader' based approach since I use HCatalog Loader to load data from Hive.)
But, the problem is the structure of my data; each value of Map structure contains value part of complex JSON. For example,
1. My table looks like (WARNING: type of 'complex_data' is not STRING, a MAP of <STRING, STRING>!)
TABLE temp_table
(
user_id BIGINT COMMENT 'user ID.',
complex_data MAP <STRING, STRING> COMMENT 'complex json data'
)
COMMENT 'temp data.'
PARTITIONED BY(created_date STRING)
STORED AS RCFILE;
2. And 'complex_data' contains (a value that I want to get is marked with two *s, so basically #'d'#'f' from each PARSED_STRING(complex_data#'c') )
{ "a": "[]",
"b": "\"sdf\"",
"**c**":"[{\"**d**\":{\"e\":\"sdfsdf\"
,\"**f**\":\"sdfs\"
,\"g\":\"qweqweqwe\"},
\"c\":[{\"d\":21321,\"e\":\"ewrwer\"},
{\"d\":21321,\"e\":\"ewrwer\"},
{\"d\":21321,\"e\":\"ewrwer\"}]
},
{\"**d**\":{\"e\":\"sdfsdf\"
,\"**f**\":\"sdfs\"
,\"g\":\"qweqweqwe\"},
\"c\":[{\"d\":21321,\"e\":\"ewrwer\"},
{\"d\":21321,\"e\":\"ewrwer\"},
{\"d\":21321,\"e\":\"ewrwer\"}]
},]"
}
3. So, I tried... (same approach for Elephant Bird)
REGISTER '/path/to/akela-0.6-SNAPSHOT.jar';
DEFINE JsonTupleMap com.mozilla.pig.eval.json.JsonTupleMap();
data = LOAD temp_table USING org.apache.hive.hcatalog.pig.HCatLoader();
values_of_map = FOREACH data GENERATE complex_data#'c' AS attr:chararray; -- IT WORKS
-- dump values_of_map shows correct chararray data per each row
-- eg) ([{"d":{"e":"sdfsdf","f":"sdfs","g":"sdf"},... },
{"d":{"e":"sdfsdf","f":"sdfs","g":"sdf"},... },
{"d":{"e":"sdfsdf","f":"sdfs","g":"sdf"},... }])
([{"d":{"e":"sdfsdf","f":"sdfs","g":"sdf"},... },
{"d":{"e":"sdfsdf","f":"sdfs","g":"sdf"},... },
{"d":{"e":"sdfsdf","f":"sdfs","g":"sdf"},... }]) ...
attempt1 = FOREACH data GENERATE JsonTupleMap(complex_data#'c'); -- THIS LINE CAUSE AN ERROR
attempt2 = FOREACH data GENERATE JsonTupleMap(CONCAT(CONCAT('{\\"key\\":', complex_data#'c'), '}'); -- IT ALSO DOSE NOT WORK
I guessed that "attempt1" was failed because the value doesn't contain full JSON. However, when I CONCAT like "attempt2", I generate additional \ mark with. (so each line starts with {\"key\": ) I'm not sure that this additional marks breaks the parsing rule or not. In any case, I want to parse the given JSON string so that Pig can understand. If you have any method or solution, please Feel free to let me know.
I finally solved my problem by using jyson library with jython UDF.
I know that I can solve it by using JAVA or other languages.
But, I think that jython with jyson is the most simplist answer to this issue.
Earlier I asked about gathering information from API-Link, and I have managed to get out most of the details by using the answar I got.
Now ny problem is when another API to get more information
This time the file will contain this information:
{
"username":"UserName",
"confirmed_rewards":"0",
"round_estimate":"0.00000000",
"total_hashrate":"0.000",
"payout_history":"0",
"round_shares":"0",
"workers":{
"UserName.1":{
"alive":"0",
"hashrate":"0.000"
},
"UserName.2":{
"alive":"0",
"hashrate":"0.000"
},
"UserName.3":{
"alive":"1",
"hashrate":"1517.540",
"last_share_timestamp":1369598007
},
"UserName.4":{
"alive":"0",
"hashrate":"0.000"
}
}
}
And I want to gather each of the workers and print them out. This "workers" could contain multiple information, but always start with "UserName.x", where the username come from the "username" paramter each time.
The numbers will always vary from 0 and up
I want to gether the information in the same way by accessing the document, and decode and print out all the workers, whatever the numbers of them are.
By using the script provided in my last question(look at the link in the start), i was thinking that it would be something like
local t = json.decode( txt )
print("Workers: ".. t["workers.UserName.1"])
But this was not the way.
Due to the username changing all the time, I was also thinking somthing like
print("Workers: ".. t["workers" .. "." .. "username" .. "." .. "1"])
From here I have no clue about how I should gather the information, even when the names and numbers vary
Thanks in advance
Here is the perfect solution:
local json = require "json"
local t = json.decode( jsonFile( "data.json" )
local workers = t.workers
for name, user in pairs(workers) do
print("--------------------")
print(name)
for tag, value in pairs(user) do
print(tag , value)
end
end
Here are some more info:
http://www.coronalabs.com/blog/2011/08/03/tutorial-exploring-json-usage-in-corona/
http://www.coronalabs.com/blog/2011/06/21/understanding-lua-tables-in-corona-sdk/
http://lua-users.org/wiki/TablesTutorial
I'm using wget to fetch several dozen JSON files on a daily basis that go like this:
{
"results": [
{
"id": "ABC789",
"title": "Apple",
},
{
"id": "XYZ123",
"title": "Orange",
}]
}
My goal is to find row's position on each JSON file given a value or set of values (i.e. "In which row XYZ123 is located?"). In previous example ABC789 is in row 1, XYZ123 in row 2 and so on.
As for now I use Google Regine to "quickly" visualize (using the Text Filter option) where the XYZ123 is standing (row 2).
But since it takes a while to do this manually for each file I was wondering if there is a quick and efficient way in one go.
What can I do and how can I fetch and do the request? Thanks in advance! FoF0
In python:
import json
#assume json_string = your loaded data
data = json.loads(json_string)
mapped_vals = []
for ent in data:
mapped_vals.append(ent['id'])
The order of items in the list will be indexed according to the json data, since the list is a sequenced collection.
In PHP:
$data = json_decode($json_string);
$output = array();
foreach($data as $values){
$output[] = $values->id;
}
Again, the ordered nature of PHP arrays ensure that the output will be ordered as-is with regard to indexes.
Either example could be modified to use a mapped dictionary (python) or an associative array (php) if needs demand.
You could adapt these to functions that take the id value as an argument, track how far they are into the array, and when found, break out and return the current index.
Wow. I posted the original question 10 months ago when I knew nothing about Python nor computer programming whatsoever!
Answer
But I learned basic Python last December and came up with a solution for not only get the rank order but to insert the results into a MySQL database:
import urllib.request
import json
# Make connection and get the content
response = urllib.request.urlopen(http://whatever.com/search?=ids=1212,125,54,454)
content = response.read()
# Decode Json search results to type dict
json_search = json.loads(content.decode("utf8"))
# Get 'results' key-value pairs to a list
search_data_all = []
for i in json_search['results']:
search_data_all.append(i)
# Prepare MySQL list with ranking order for each id item
ranks_list_to_mysql = []
for i in range(len(search_data_all)):
d = {}
d['id'] = search_data_all[i]['id']
d['rank'] = i + 1
ranks_list_to_mysql.append(d)