We are trying to start the Azure-SSIS Integration runtime in ADFv2 using the Start-AzureRmDataFactoryV2IntegrationRuntime PowerShell command. The command runs for 20 minutes and then returns the following error: An error occurred while requesting the status of Integration Runtime, but you can manually execute the following command: Get-AzureRmDataFactoryV2IntegrationRuntime -DataFactoryName MyDataFactory -ResourceGroupName MyResourceGroup -Name MyIR –Status. The IR is getting started, but not sure why the command shows this error. Could you let me know how to resolve this?
There seems to be an IR provisioning error, so could you show the complete error message in PSH? Alternatively, the error message can also be found on the IR monitoring page of ADF web app.
I found Azure powershell version 5.1.1 has this issue, and when I upgrade Azure powershell to version 6.6, there is no such issue. you can upgrade to newest Azure powershell.
Related
I am working on lift and shift SSIS packages through ADF. Setup have been done properly but when I trigger the activity in ADF, I see this error "Package execution failed. For more details, select the output of your activity run on the same row". How to resolve this error?
Going through the official MS docs, I can see the below error documented. Can you try as suggested.
Error message: "Staging task failed. TaskStatus: Failed, ErrorCode: 2906, ErrorMessage: Package execution failed. For more details, select the output of your activity run on the same row., Output: {"OperationErrorMessages": "4/14/2021 7:10:35 AM +00:00 : = Failed to start Named pipe proxy... "
Check if security policies are correctly assigned to the account
running self-hosted IR service. If Windows authentication is used on
Execute SSIS Package activity or the execution credential is set in
SSIS catalog (SSISDB), the same security policies must be assigned to
the Windows account used. More detail can be found at Configure
Self-Hosted IR as a proxy for Azure-SSIS IR in
ADF
Getting below error when I start sandbox. I think we need use jdk8 as per the DAML doc.
daml sandbox --scenario Main:setup .daml/dist/quickstart-0.0.1.dar
Error: Registry key 'Software\JavaSoft\Java Runtime Environment'\CurrentVersion'
has value '1.8', but '1.7' is required.
Error: could not find java.dll
Error: Could not find Java SE Runtime Environment.
daml-helper: Received ExitFailure 2 when running
Raw command: java -jar "C:\Users\santh\AppData\Roaming\daml\sdk\0.13.21\sandbox/sandbox.jar" --scenario Main:setup .daml/dist/quickstart-0.0.1.dar
During my initial setup, I have faced the similar issue. It may be because of an existing Java installation in your machine.
You can try the below options to fix this issue.
Option 1:
1. Check if you have more than one version of JAVA in machine.
2. If yes, uninstall everything and do the clean installation. Make sure your Environment Path variable(s) are got set properly.
or
Option 2:
1) Download the latest JDK in Zip format "jdk-12.0.2_windows-x64_bin.zip"
2) Extract it manually in your local drive.
3) Manually update your Environment Path variables (ref. https://javatutorial.net/set-java-home-windows-10).
I hope it will help you to fix your problem.
Cheers,
Augustine
I have tried to install Moodle 3.5.1 on my development server (Apache 2.4.29 and MySQL v.5.7).
The installation process went smoothly: The MySQL database has been set up, all required PHP packages are installed, the system has been successfully installed, all file permissions are correct.
After the installation I only get the following error:
"Coding error detected, it must be fixed by a programmer: PHP catchable fatal error"
There are no further error messages. There are no error messages in Apache Error log or PHP log files. In the PHP ini file the display of error messages is activated.
So I can not figure out what did not work or how to fix it.
Put error_reporting(E_ALL); and ini_set('display_errors', 1); in the beggining of the script you see problem in for more debug info
Moodle 3.5 requires PHP 7
https://docs.moodle.org/35/en/PHP
Could that be your problem?
Is it possible to deploy a Single Page App project build using grunt to IIS using MSDeploy from TeamCity? The project is not any kind of Visual Studio solution and doesn't get built using MSBuild.
My Command parameters which are not working are:
-source:package='%teamcity.build.checkoutDir%\Dist.%build.number%.zip' -dest:auto,computerName="%system.MsDeployServiceUrl%",userName="%system.UserName%",password="%system.Password%",authtype="basic",includeAcls="False"
-verb:sync -setParamFile:"%teamcity.build.checkoutDir%\Dist.%build.number%.zip.SetParameters.xml"
-AllowUntrusted -setParam:"IIS Web Application Name"="%system.WebSiteName%" -verbose
The error I am getting is:
[11:47:31][Step 3/3] Error Code: ERROR_EXCEPTION_WHILE_CREATING_OBJECT
[11:47:31][Step 3/3] More Information: Object of type 'package' and
path 'D:\TeamCity\buildAgent\work\e2b0015b49d87e90\Dist.30.zip' cannot
be created. Learn more at:
http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_EXCEPTION_WHILE_CREATING_OBJECT.
[11:47:31][Step 3/3] Error: The Zip package
'D:\TeamCity\buildAgent\work\e2b0015b49d87e90\Dist.30.zip' could not
be loaded. [11:47:31][Step 3/3] Error: Could not find file
'D:\TeamCity\buildAgent\work\e2b0015b49d87e90\Dist.30.zip'.
[11:47:31][Step 3/3] Error count: 1. [11:47:31][Step 3/3] Process
exited with code -1 [11:47:31][Step 3/3] Step Deploy (Command Line)
failed
My build process is working as I end up with the correct artefacts, I just don't seem to be able to deploy my generated artefacts using MSDeploy
This is a screenshot of my artefacts:
I managed to get this working by changing my parameters to the following:
-source:iisapp='%teamcity.build.checkoutDir%\dist' -dest:iisapp='C:\www\xxxx-website',computerName="%system.MsDeployServiceUrl%",userName="%system.UserName%",password="%system.Password%",authtype="basic",includeAcls="False"
-verb:sync -AllowUntrusted -verbose
And changing my user to an admin user rather than an IIS user. Note use of iisapp - the key was to read the MSDeploy api using msdeploy -help
FYI - a good test is to use the intended command against msdeploy.exe in console and check output errors then push command into teamcity when it's working.
I created a grunt and gulp plugin to do just what you are looking to do. gulp-mswebdeploy-package and grunt-mswebdeploy-package will create a ms webdeploy package from any folder and do not require your build to be running on windows.
https://www.npmjs.com/package/gulp-mswebdeploy-package
https://www.npmjs.com/package/grunt-mswebdeploy-package
I want to develop a new cartridge for my own use. I use OpenShift Cartridge Development Kit to start my work. My building script is written in .openshift/action_hooks/build and it can be successfully executed.
But when I tried to use the command displayed on the homepage of the CDK project - "rhc create-app mynewcart http://##YOUR-DOMAIN##/manifest/##YOUR-COMMIT-ID##" - to create an app, I got the following error: "Unable to complete the requested operation due to: An invalid exit code (1) was returned from the server ex-std-node161.prod.rhcloud.com. This indicates an unexpected problem during the
execution of your request."
How can I trace the progress of deploying and find out where is the code that caused the problem? Is there any log file available for me to analyse?
Use the --debug option when running the command and you'll get much more detailed output:
rhc create-app mynewcart http://##YOUR-DOMAIN##/manifest/##YOUR-COMMIT-ID## --debug