I have a MySQL database with the two tables that I need modified.
The first table holds notes
id type note
1 1 24 months warranty
2 1 12 months warranty
3 2 Garage in Denver
4 3 Pre sales maintenance done
....
And then a vehicle table that holds many vehicle tables and a field that hold notes with their text instead of a pointer
id licence_plate ... sales_notes ...
1 XH34DN ... <warranty>24 months warranty</warranty><garage>Garage in Denver</garage><maintenance>Pre sales maintenance done</maintenance> ...
2 K4B3C6 ... <warranty>12 months warranty</warranty><garage>Garage in Sacramento</garage><maintenance>Pre sales maintenance not done</maintenance> ...
As you can imagine this is higly inneficient and I want to modify to pointers that hold the id of the note.
id licence_plate ... warranty_note garage_note maintenace_note ...
1 XH34DN ... 1 3 4 ...
2 K4B3C6 ... 2 7 12 ...
I can do it manual updates but I would like to build one that makes it automatically by type.
So for notes.type=1 if the notes.note text is found in vehicle.sales_notes it updates the vehicle.warranty_note.
Any idea how to build something like that?
I have something like this in mind, but id doesn't work. No results are updated
UPDATE tx_vehicle v, tx_note n
SET v.garage_note = n.uid
WHERE v.sales_notes LIKE ('%'+n.note+'%')
MySQL has special XML parsing functions.
insert into your_new_notes_table (id, licence_plate, warranty_note, garage_note, maintenace_note)
select
sn.id,
sn.license_plate,
(select nt.id from notes as nt where nt.type = 1 and nt.note = ExtractValue(sn.sales_note, "/warranty")) as warranty_note,
(select nt.id from notes as nt where nt.type = 1 and nt.note = ExtractValue(sn.sales_note, "/garage")) as garage_note,
(select nt.id from notes as nt where nt.type = 1 and nt.note = ExtractValue(sn.sales_note, "/maintenance")) as maintenance_note
from note_types as nt
Although, it will fail if exact note from sales is not found in note_types table. You can adjust note text comparison, replacing it with like operator, regex checking or another functions; you can replace abbreviations with full words or invent your own MySQL function. Moreover, you can invent your own MySQL function that would encompass internal selects and return null if note is not found in note_types table.
If you want to update existing table, you need to perform update query with join to same select as I provided.
I thought I had a very simple query to perform, but I can't seem to make it work.
I have this table with 2 columns:
version_id trim_id
1 15
1 25
1 28
1 30
1 35
2 12
2 25
2 33
2 48
3 11
3 25
3 30
3 32
I am trying to get any version-id's that have say a sub-set of trim_id's. Let's say all version_id's that have trim_id's 25 and 30. My obvious attempt was :
SELECT * FROM table WHERE trim_id=25 AND trim_id=30
I was expecting to have version_id 1 and 3 as a result, but instead I get nothing.
I am working with the latest version of MAMP, which has some odd behavior, like in this case it just tells me its 'LOADING' and never gives me an error message or something. But that's normally the case when there is no data to return.
This is InnoDB, if that helps.
Thanks for your input.
Your query does not work because you are using AND and the trim_id cannot have two different values at the same time, so you need to apply Relational Division to get the result.
You will need to use something similar to the following:
SELECT version_id
FROM yourtable
WHERE trim_id in (25, 30)
group by version_id
having count(distinct trim_id) = 2
See SQL Fiddle with Demo.
This will return the version_id values that have both 25 and 30. Then if you wanted to include additional columns in the final result, you can expand the query to:
select t1.version_id, t1.trim_id
from yourtable t1
where exists (SELECT t2.version_id
FROM yourtable t2
WHERE t2.trim_id in (25, 30)
and t1.version_id = t2.version_id
group by t2.version_id
having count(distinct t2.trim_id) = 2);
See SQL Fiddle with Demo
SELECT *
FROM table
WHERE trim_id IN(25,30)
I am having a performance issue. I am trying to select from a table based on a very long list of parameters
Currently am using this stored proc
CREATE PROC [dbo].[GetFileContentsFromTitles]
#MyTitles varchar(max)
AS
SELECT [Title], [Sequence] From [dbo].[MasterSequence]
WHERE charindex(',' + Title + ',', ',' + #MyTitles + ',') > 0;
Where #MyTitles can be a very big number (currently doing a string with 4000 entries seperated by commas). Any suggestions? Thanks
OK, if you want performance for something like this, then you need to use the best stuff out there. First, create this function for splitting strings (which I got from Jeff Moden about two weeks ago):
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER FUNCTION [dbo].[DelimitedSplit8K]
/**********************************************************************************************************************
Purpose:
Split a given string at a given delimiter and return a list of the split elements (items).
Notes:
1. Leading a trailing delimiters are treated as if an empty string element were present.
2. Consecutive delimiters are treated as if an empty string element were present between them.
3. Except when spaces are used as a delimiter, all spaces present in each element are preserved.
Returns:
iTVF containing the following:
ItemNumber = Element position of Item as a BIGINT (not converted to INT to eliminate a CAST)
Item = Element value as a VARCHAR(8000)
Statistics on this function may be found at the following URL:
http://www.sqlservercentral.com/Forums/Topic1101315-203-4.aspx
CROSS APPLY Usage Examples and Tests:
--=====================================================================================================================
-- TEST 1:
-- This tests for various possible conditions in a string using a comma as the delimiter. The expected results are
-- laid out in the comments
--=====================================================================================================================
--===== Conditionally drop the test tables to make reruns easier for testing.
-- (this is NOT a part of the solution)
IF OBJECT_ID('tempdb..#JBMTest') IS NOT NULL DROP TABLE #JBMTest
;
--===== Create and populate a test table on the fly (this is NOT a part of the solution).
-- In the following comments, "b" is a blank and "E" is an element in the left to right order.
-- Double Quotes are used to encapsulate the output of "Item" so that you can see that all blanks
-- are preserved no matter where they may appear.
SELECT *
INTO #JBMTest
FROM ( --# & type of Return Row(s)
SELECT 0, NULL UNION ALL --1 NULL
SELECT 1, SPACE(0) UNION ALL --1 b (Empty String)
SELECT 2, SPACE(1) UNION ALL --1 b (1 space)
SELECT 3, SPACE(5) UNION ALL --1 b (5 spaces)
SELECT 4, ',' UNION ALL --2 b b (both are empty strings)
SELECT 5, '55555' UNION ALL --1 E
SELECT 6, ',55555' UNION ALL --2 b E
SELECT 7, ',55555,' UNION ALL --3 b E b
SELECT 8, '55555,' UNION ALL --2 b B
SELECT 9, '55555,1' UNION ALL --2 E E
SELECT 10, '1,55555' UNION ALL --2 E E
SELECT 11, '55555,4444,333,22,1' UNION ALL --5 E E E E E
SELECT 12, '55555,4444,,333,22,1' UNION ALL --6 E E b E E E
SELECT 13, ',55555,4444,,333,22,1,' UNION ALL --8 b E E b E E E b
SELECT 14, ',55555,4444,,,333,22,1,' UNION ALL --9 b E E b b E E E b
SELECT 15, ' 4444,55555 ' UNION ALL --2 E (w/Leading Space) E (w/Trailing Space)
SELECT 16, 'This,is,a,test.' --E E E E
) d (SomeID, SomeValue)
;
--===== Split the CSV column for the whole table using CROSS APPLY (this is the solution)
SELECT test.SomeID, test.SomeValue, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
FROM #JBMTest test
CROSS APPLY dbo.DelimitedSplit8K(test.SomeValue,',') split
;
--=====================================================================================================================
-- TEST 2:
-- This tests for various "alpha" splits and COLLATION using all ASCII characters from 0 to 255 as a delimiter against
-- a given string. Note that not all of the delimiters will be visible and some will show up as tiny squares because
-- they are "control" characters. More specifically, this test will show you what happens to various non-accented
-- letters for your given collation depending on the delimiter you chose.
--=====================================================================================================================
WITH
cteBuildAllCharacters (String,Delimiter) AS
(
SELECT TOP 256
'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789',
CHAR(ROW_NUMBER() OVER (ORDER BY (SELECT NULL))-1)
FROM master.sys.all_columns
)
SELECT ASCII_Value = ASCII(c.Delimiter), c.Delimiter, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
FROM cteBuildAllCharacters c
CROSS APPLY dbo.DelimitedSplit8K(c.String,c.Delimiter) split
ORDER BY ASCII_Value, split.ItemNumber
;
-----------------------------------------------------------------------------------------------------------------------
Other Notes:
1. Optimized for VARCHAR(8000) or less. No testing or error reporting for truncation at 8000 characters is done.
2. Optimized for single character delimiter. Multi-character delimiters should be resolvedexternally from this
function.
3. Optimized for use with CROSS APPLY.
4. Does not "trim" elements just in case leading or trailing blanks are intended.
5. If you don't know how a Tally table can be used to replace loops, please see the following...
http://www.sqlservercentral.com/articles/T-SQL/62867/
6. Changing this function to use NVARCHAR(MAX) will cause it to run twice as slow. It's just the nature of
VARCHAR(MAX) whether it fits in-row or not.
7. Multi-machine testing for the method of using UNPIVOT instead of 10 SELECT/UNION ALLs shows that the UNPIVOT method
is quite machine dependent and can slow things down quite a bit.
-----------------------------------------------------------------------------------------------------------------------
Credits:
This code is the product of many people's efforts including but not limited to the following:
cteTally concept originally by Iztek Ben Gan and "decimalized" by Lynn Pettis (and others) for a bit of extra speed
and finally redacted by Jeff Moden for a different slant on readability and compactness. Hat's off to Paul White for
his simple explanations of CROSS APPLY and for his detailed testing efforts. Last but not least, thanks to
Ron "BitBucket" McCullough and Wayne Sheffield for their extreme performance testing across multiple machines and
versions of SQL Server. The latest improvement brought an additional 15-20% improvement over Rev 05. Special thanks
to "Nadrek" and "peter-757102" (aka Peter de Heer) for bringing such improvements to light. Nadrek's original
improvement brought about a 10% performance gain and Peter followed that up with the content of Rev 07.
I also thank whoever wrote the first article I ever saw on "numbers tables" which is located at the following URL
and to Adam Machanic for leading me to it many years ago.
http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-numbers-table.html
-----------------------------------------------------------------------------------------------------------------------
Revision History:
Rev 00 - 20 Jan 2010 - Concept for inline cteTally: Lynn Pettis and others.
Redaction/Implementation: Jeff Moden
- Base 10 redaction and reduction for CTE. (Total rewrite)
Rev 01 - 13 Mar 2010 - Jeff Moden
- Removed one additional concatenation and one subtraction from the SUBSTRING in the SELECT List for that tiny
bit of extra speed.
Rev 02 - 14 Apr 2010 - Jeff Moden
- No code changes. Added CROSS APPLY usage example to the header, some additional credits, and extra
documentation.
Rev 03 - 18 Apr 2010 - Jeff Moden
- No code changes. Added notes 7, 8, and 9 about certain "optimizations" that don't actually work for this
type of function.
Rev 04 - 29 Jun 2010 - Jeff Moden
- Added WITH SCHEMABINDING thanks to a note by Paul White. This prevents an unnecessary "Table Spool" when the
function is used in an UPDATE statement even though the function makes no external references.
Rev 05 - 02 Apr 2011 - Jeff Moden
- Rewritten for extreme performance improvement especially for larger strings approaching the 8K boundary and
for strings that have wider elements. The redaction of this code involved removing ALL concatenation of
delimiters, optimization of the maximum "N" value by using TOP instead of including it in the WHERE clause,
and the reduction of all previous calculations (thanks to the switch to a "zero based" cteTally) to just one
instance of one add and one instance of a subtract. The length calculation for the final element (not
followed by a delimiter) in the string to be split has been greatly simplified by using the ISNULL/NULLIF
combination to determine when the CHARINDEX returned a 0 which indicates there are no more delimiters to be
had or to start with. Depending on the width of the elements, this code is between 4 and 8 times faster on a
single CPU box than the original code especially near the 8K boundary.
- Modified comments to include more sanity checks on the usage example, etc.
- Removed "other" notes 8 and 9 as they were no longer applicable.
Rev 06 - 12 Apr 2011 - Jeff Moden
- Based on a suggestion by Ron "Bitbucket" McCullough, additional test rows were added to the sample code and
the code was changed to encapsulate the output in pipes so that spaces and empty strings could be perceived
in the output. The first "Notes" section was added. Finally, an extra test was added to the comments above.
Rev 07 - 06 May 2011 - Peter de Heer, a further 15-20% performance enhancement has been discovered and incorporated
into this code which also eliminated the need for a "zero" position in the cteTally table.
**********************************************************************************************************************/
--===== Define I/O parameters
(#pString VARCHAR(8000), #pDelimiter CHAR(1))
RETURNS TABLE WITH SCHEMABINDING AS
RETURN
--===== "Inline" CTE Driven "Tally Table" produces values from 1 up to 10,000...
-- enough to cover VARCHAR(8000)
WITH E1(N) AS (
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1
), --10E+1 or 10 rows
E2(N) AS (SELECT 1 FROM E1 a, E1 b), --10E+2 or 100 rows
E4(N) AS (SELECT 1 FROM E2 a, E2 b), --10E+4 or 10,000 rows max
cteTally(N) AS (--==== This provides the "base" CTE and limits the number of rows right up front
-- for both a performance gain and prevention of accidental "overruns"
SELECT TOP (ISNULL(DATALENGTH(#pString),0)) ROW_NUMBER() OVER (ORDER BY (SELECT NULL)) FROM E4
),
cteStart(N1) AS (--==== This returns N+1 (starting position of each "element" just once for each delimiter)
SELECT 1 UNION ALL
SELECT t.N+1 FROM cteTally t WHERE SUBSTRING(#pString,t.N,1) = #pDelimiter
),
cteLen(N1,L1) AS(--==== Return start and length (for use in substring)
SELECT s.N1,
ISNULL(NULLIF(CHARINDEX(#pDelimiter,#pString,s.N1),0)-s.N1,8000)
FROM cteStart s
)
--===== Do the actual split. The ISNULL/NULLIF combo handles the length for the final element when no delimiter is found.
SELECT ItemNumber = ROW_NUMBER() OVER(ORDER BY l.N1),
Item = SUBSTRING(#pString, l.N1, l.L1)
FROM cteLen l
;
Yes, it long, but that's mostly comments to explain it and its history. Don't worry, its the fastest thing available in T-SQL (AFAIK only SQLCLR is faster, and that's not T-SQL).
Note that it only supports up to VARCHAR(8000). If your really need VARCHAR(MAX), then it can be easily changed to that, but VARCHAR(MAX)'s are about twice as slow.
Now you can implement your procedure like this:
CREATE PROC [dbo].[GetFileContentsFromTitles]
#MyTitles varchar(max)
AS
SELECT *
INTO #tmpTitles
FROM dbo.DelimitedSplit8K(#MyTitles, ',')
SELECT [Title], [Sequence] From [dbo].[MasterSequence]
WHERE Title IN (SELECT item FROM #tmpTitles)
I cannot test this for you without your DDL and some data, but it should be much faster. If not, then we may need to throw an index onto the [item] column in the temp table.
Here's another version of the split function that uses VARCHAR(MAX):
ALTER FUNCTION [dbo].[DelimitedSplitMax]
/**********************************************************************************************************************
Purpose:
Split a given string at a given delimiter and return a list of the split elements (items).
Notes:
1. Leading a trailing delimiters are treated as if an empty string element were present.
2. Consecutive delimiters are treated as if an empty string element were present between them.
3. Except when spaces are used as a delimiter, all spaces present in each element are preserved.
Returns:
iTVF containing the following:
ItemNumber = Element position of Item as a BIGINT (not converted to INT to eliminate a CAST)
Item = Element value as a VARCHAR(MAX)
Statistics on this function may be found at the following URL:
http://www.sqlservercentral.com/Forums/Topic1101315-203-4.aspx
-----------------------------------------------------------------------------------------------------------------------
Other Notes:
1. Optimized for VARCHAR(8000) or less. No testing or error reporting for truncation at 8000 characters is done.
2. Optimized for single character delimiter. Multi-character delimiters should be resolvedexternally from this
function.
3. Optimized for use with CROSS APPLY.
4. Does not "trim" elements just in case leading or trailing blanks are intended.
5. If you don't know how a Tally table can be used to replace loops, please see the following...
http://www.sqlservercentral.com/articles/T-SQL/62867/
6. Changing this function to use NVARCHAR(MAX) will cause it to run twice as slow. It's just the nature of
VARCHAR(MAX) whether it fits in-row or not.
7. Multi-machine testing for the method of using UNPIVOT instead of 10 SELECT/UNION ALLs shows that the UNPIVOT method
is quite machine dependent and can slow things down quite a bit.
-----------------------------------------------------------------------------------------------------------------------
Credits:
This code is the product of many people's efforts including but not limited to the following:
cteTally concept originally by Iztek Ben Gan and "decimalized" by Lynn Pettis (and others) for a bit of extra speed
and finally redacted by Jeff Moden for a different slant on readability and compactness. Hat's off to Paul White for
his simple explanations of CROSS APPLY and for his detailed testing efforts. Last but not least, thanks to
Ron "BitBucket" McCullough and Wayne Sheffield for their extreme performance testing across multiple machines and
versions of SQL Server. The latest improvement brought an additional 15-20% improvement over Rev 05. Special thanks
to "Nadrek" and "peter-757102" (aka Peter de Heer) for bringing such improvements to light. Nadrek's original
improvement brought about a 10% performance gain and Peter followed that up with the content of Rev 07.
I also thank whoever wrote the first article I ever saw on "numbers tables" which is located at the following URL
and to Adam Machanic for leading me to it many years ago.
http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-numbers-table.html
-----------------------------------------------------------------------------------------------------------------------
Revision History:
Rev 00 - 20 Jan 2010 - Concept for inline cteTally: Lynn Pettis and others.
Redaction/Implementation: Jeff Moden
- Base 10 redaction and reduction for CTE. (Total rewrite)
Rev 01 - 13 Mar 2010 - Jeff Moden
- Removed one additional concatenation and one subtraction from the SUBSTRING in the SELECT List for that tiny
bit of extra speed.
Rev 02 - 14 Apr 2010 - Jeff Moden
- No code changes. Added CROSS APPLY usage example to the header, some additional credits, and extra
documentation.
Rev 03 - 18 Apr 2010 - Jeff Moden
- No code changes. Added notes 7, 8, and 9 about certain "optimizations" that don't actually work for this
type of function.
Rev 04 - 29 Jun 2010 - Jeff Moden
- Added WITH SCHEMABINDING thanks to a note by Paul White. This prevents an unnecessary "Table Spool" when the
function is used in an UPDATE statement even though the function makes no external references.
Rev 05 - 02 Apr 2011 - Jeff Moden
- Rewritten for extreme performance improvement especially for larger strings approaching the 8K boundary and
for strings that have wider elements. The redaction of this code involved removing ALL concatenation of
delimiters, optimization of the maximum "N" value by using TOP instead of including it in the WHERE clause,
and the reduction of all previous calculations (thanks to the switch to a "zero based" cteTally) to just one
instance of one add and one instance of a subtract. The length calculation for the final element (not
followed by a delimiter) in the string to be split has been greatly simplified by using the ISNULL/NULLIF
combination to determine when the CHARINDEX returned a 0 which indicates there are no more delimiters to be
had or to start with. Depending on the width of the elements, this code is between 4 and 8 times faster on a
single CPU box than the original code especially near the 8K boundary.
- Modified comments to include more sanity checks on the usage example, etc.
- Removed "other" notes 8 and 9 as they were no longer applicable.
Rev 06 - 12 Apr 2011 - Jeff Moden
- Based on a suggestion by Ron "Bitbucket" McCullough, additional test rows were added to the sample code and
the code was changed to encapsulate the output in pipes so that spaces and empty strings could be perceived
in the output. The first "Notes" section was added. Finally, an extra test was added to the comments above.
Rev 07 - 06 May 2011 - Peter de Heer, a further 15-20% performance enhancement has been discovered and incorporated
into this code which also eliminated the need for a "zero" position in the cteTally table.
Rev 07a- 18 Oct 2012 - RBarryYoung, Varchar(MAX), because its needed, even though its slower...
**********************************************************************************************************************/
--===== Define I/O parameters
(#pString VARCHAR(MAX), #pDelimiter CHAR(1))
RETURNS TABLE WITH SCHEMABINDING AS
RETURN
--===== "Inline" CTE Driven "Tally Table" produces values from 1 up to 100,000,000...
-- hopefully enough to cover most VARCHAR(MAX)'s
WITH E1(N) AS (
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1
), --10E+1 or 10 rows
E2(N) AS (SELECT 1 FROM E1 a, E1 b), --10E+2 or 100 rows
E4(N) AS (SELECT 1 FROM E2 a, E2 b), --10E+4 or 10,000 rows max
E8(N) AS (SELECT 1 FROM E4 a, E4 b), --10E+8 or 100,000,000 rows max
cteTally(N) AS (--==== This provides the "base" CTE and limits the number of rows right up front
-- for both a performance gain and prevention of accidental "overruns"
SELECT TOP (ISNULL(DATALENGTH(#pString),0)) ROW_NUMBER() OVER (ORDER BY (SELECT NULL)) FROM E8
),
cteStart(N1) AS (--==== This returns N+1 (starting position of each "element" just once for each delimiter)
SELECT 1 UNION ALL
SELECT t.N+1 FROM cteTally t WHERE SUBSTRING(#pString,t.N,1) = #pDelimiter
),
cteLen(N1,L1) AS(--==== Return start and length (for use in substring)
SELECT s.N1,
ISNULL(NULLIF(CHARINDEX(#pDelimiter,#pString,s.N1),0)-s.N1,999999999)
FROM cteStart s
)
--===== Do the actual split. The ISNULL/NULLIF combo handles the length for the final element when no delimiter is found.
SELECT ItemNumber = ROW_NUMBER() OVER(ORDER BY l.N1),
Item = SUBSTRING(#pString, l.N1, l.L1)
FROM cteLen l
;
Be forewarned, however, that I only set it up to count up to 100,000,000 characters. Also, I have not had a chance to test it yet, you should be sure to test it yourself.