Suppose I have an element with 2 classes that both apply padding-left to it:
<section class="pad1 pad2">
...
</section>
then in my .css file
.pad1 {
padding-left: 60px;
}
.pad2 {
padding-left: 30px;
}
How will padding-left be applied?
What rules should I know in this kind of situations?
I hope you understand.
.pad1{
padding-left:60px;
}
.pad2{
padding-left:30px;
}
.pad3{
padding-left:30px;
}
.pad4{
padding-left:60px;
}
<section class="pad1 pad2">
Hi, This is css padding solution.
</section>
<section class="pad3 pad4">
Hi, This is css padding solution.
</section>
Your question is all about CSS selection precedence rules. At first you should understand what is CSS precedence value for each selector.
We usually use as a CSS selector class, ID, tag name, inline etc. Each selector have own priority value, priority table like below:
For each tag (a, div, p etc.) selector = 1,
For each class and pseudo-class (.class1, .class1:active etc) selector = 10,
For each ID (#id) selector = 100,
For each inline style (<div style="color:red"></div>) selector = 1000,
For each !important (.class { color: red !important;}) selector = Infinity.
Suppose right now you have a selector like following:
#nav ul a { color: gray; } = 100 (#nav) + 1 (ul) + 1 (a) = 102
Now come on your point, you have 2 class selector .pad1 and .pad2 which each selector value is 10 means equal so which one will work? If selection priority if equal then most last one will work so .pad2 will be work, because CSS parser read document top to bottom. But if selection priority is different then higher one will work in this case order dose not matter.
For better understand see here with more clear explanation: https://css-tricks.com/specifics-on-css-specificity/
In this situation always last one CSS class will be on priority:
If .pad2 will be last one then it will be overwrite on previous class .pad1 like below:-
.pad1 {
padding-left: 60px;
}
.pad2 {
padding-left: 30px;
}
<section class="pad1 pad2">
This is class section
</section>
If .pad1 will be last one then it will be overwrite on previous class .pad2 like below:-
.pad2 {
padding-left: 30px;
}
.pad1 {
padding-left: 60px;
}
<section class="pad1 pad2">
This is class section
</section>
CSS rules are applied to objects in the page that match their selectors in the order they are encountered in the style sheet. However With !important, the property will now give priority to the latest important value.
Related
I'd like to understand how CSS selectors work with property collisions. How is one property selected over another one?
div {
background-color: red;
}
div.my_class {
background-color: black;
}
div#my_id {
background-color: blue;
}
body div {
background-color: green;
}
body>div {
background-color: orange;
}
body>div#my_id {
background-color: pink;
}
<div id="my_id" class="my_class">hello</div>
How does selector priority work?
I'll just toss in a link to the CSS 2.1 spec itself, and how browsers are supposed to calculate specificity:
CSS 2.1 Section 6.4.3:
A selector's specificity is calculated as follows:
count 1 if the declaration is from is a 'style' attribute rather than a rule with a selector, 0 otherwise (= a) (In HTML, values of an element's "style" attribute are style sheet rules. These rules have no selectors, so a=1, b=0, c=0, and d=0.)
count the number of ID attributes in the selector (= b)
count the number of other attributes and pseudo-classes in the selector (= c)
count the number of element names and pseudo-elements in the selector (= d)
The specificity is based only on the form of the selector. In particular, a selector of the form "[id=p33]" is counted as an attribute selector (a=0, b=0, c=1, d=0), even if the id attribute is defined as an "ID" in the source document's DTD.
Concatenating the four numbers a-b-c-d (in a number system with a large base) gives the specificity.
If the specificities are equal, then CSS 2.1 Section 6.4.1 comes into play:
Finally, sort by order specified: if two declarations have the same weight, origin and specificity, the latter specified wins. Declarations in imported style sheets are considered to be before any declarations in the style sheet itself.
Note that this is talking about when the style is defined, not when it is used. If classes .a and .b have equal specificity, whichever is defined last in the stylesheet(s) wins. <p class="a b">...</p> and <p class="b a">...</p> will be styled identically, based on the definition order of .a and .b.
Element
Class selectors
ID Selectors
Inline styles
!important
In order, 1 is the lowest specificity and 5 is the highest.
https://youtu.be/NqDb9GfMXuo will shown details to demo it.
What you are interested in is specificity.
Firebug is a great tool to help inspect this. But other browsers also have built in tools for inspecting the applied CSS rules.
You can refer the full answer here Mozilla documentation
Start from the most specific:
id selectors > class selectors > type selectors(normal h1, p tag and so on..)
!important always wins, but it is considered a bad practice.See the link above.
The best way is to experiment with it:
<!-- start class vs id -->
<p class="class1" id="id1">.class vs #id: The winner is #id</p>
<!-- upper vs bottom -->
<p id="id2">the very bottom is the winner</p>
<!--most specific is the winner -->
<p id="id3">the most specific</p>
<!--pseudo and target selector -->
<h3>pseudo vs type selector</h3>
<!-- !important is more important! -->
<h1 id="very-specific">HI! I am very important!</h1>
</body>
CSS:
#id1{
color: blue;
}
.class1{
color: red;
}
#id2{
color: yellow;
}
#id2{
color : green;
}
body p#id3{
color :orange;
}
body p{
color : purple;
}
body{
color : black;
}
h3::first-letter {
color: #ff0000;
}
h3{
color: CornflowerBlue ;
}
h1{
color: gray !important;
}
body h1#very-specific{
color: red;
}
Here's a test case.
I'd like to understand how CSS selectors work with property collisions. How is one property selected over another one?
div {
background-color: red;
}
div.my_class {
background-color: black;
}
div#my_id {
background-color: blue;
}
body div {
background-color: green;
}
body>div {
background-color: orange;
}
body>div#my_id {
background-color: pink;
}
<div id="my_id" class="my_class">hello</div>
How does selector priority work?
I'll just toss in a link to the CSS 2.1 spec itself, and how browsers are supposed to calculate specificity:
CSS 2.1 Section 6.4.3:
A selector's specificity is calculated as follows:
count 1 if the declaration is from is a 'style' attribute rather than a rule with a selector, 0 otherwise (= a) (In HTML, values of an element's "style" attribute are style sheet rules. These rules have no selectors, so a=1, b=0, c=0, and d=0.)
count the number of ID attributes in the selector (= b)
count the number of other attributes and pseudo-classes in the selector (= c)
count the number of element names and pseudo-elements in the selector (= d)
The specificity is based only on the form of the selector. In particular, a selector of the form "[id=p33]" is counted as an attribute selector (a=0, b=0, c=1, d=0), even if the id attribute is defined as an "ID" in the source document's DTD.
Concatenating the four numbers a-b-c-d (in a number system with a large base) gives the specificity.
If the specificities are equal, then CSS 2.1 Section 6.4.1 comes into play:
Finally, sort by order specified: if two declarations have the same weight, origin and specificity, the latter specified wins. Declarations in imported style sheets are considered to be before any declarations in the style sheet itself.
Note that this is talking about when the style is defined, not when it is used. If classes .a and .b have equal specificity, whichever is defined last in the stylesheet(s) wins. <p class="a b">...</p> and <p class="b a">...</p> will be styled identically, based on the definition order of .a and .b.
Element
Class selectors
ID Selectors
Inline styles
!important
In order, 1 is the lowest specificity and 5 is the highest.
https://youtu.be/NqDb9GfMXuo will shown details to demo it.
What you are interested in is specificity.
Firebug is a great tool to help inspect this. But other browsers also have built in tools for inspecting the applied CSS rules.
You can refer the full answer here Mozilla documentation
Start from the most specific:
id selectors > class selectors > type selectors(normal h1, p tag and so on..)
!important always wins, but it is considered a bad practice.See the link above.
The best way is to experiment with it:
<!-- start class vs id -->
<p class="class1" id="id1">.class vs #id: The winner is #id</p>
<!-- upper vs bottom -->
<p id="id2">the very bottom is the winner</p>
<!--most specific is the winner -->
<p id="id3">the most specific</p>
<!--pseudo and target selector -->
<h3>pseudo vs type selector</h3>
<!-- !important is more important! -->
<h1 id="very-specific">HI! I am very important!</h1>
</body>
CSS:
#id1{
color: blue;
}
.class1{
color: red;
}
#id2{
color: yellow;
}
#id2{
color : green;
}
body p#id3{
color :orange;
}
body p{
color : purple;
}
body{
color : black;
}
h3::first-letter {
color: #ff0000;
}
h3{
color: CornflowerBlue ;
}
h1{
color: gray !important;
}
body h1#very-specific{
color: red;
}
Here's a test case.
I'd like to understand how CSS selectors work with property collisions. How is one property selected over another one?
div {
background-color: red;
}
div.my_class {
background-color: black;
}
div#my_id {
background-color: blue;
}
body div {
background-color: green;
}
body>div {
background-color: orange;
}
body>div#my_id {
background-color: pink;
}
<div id="my_id" class="my_class">hello</div>
How does selector priority work?
I'll just toss in a link to the CSS 2.1 spec itself, and how browsers are supposed to calculate specificity:
CSS 2.1 Section 6.4.3:
A selector's specificity is calculated as follows:
count 1 if the declaration is from is a 'style' attribute rather than a rule with a selector, 0 otherwise (= a) (In HTML, values of an element's "style" attribute are style sheet rules. These rules have no selectors, so a=1, b=0, c=0, and d=0.)
count the number of ID attributes in the selector (= b)
count the number of other attributes and pseudo-classes in the selector (= c)
count the number of element names and pseudo-elements in the selector (= d)
The specificity is based only on the form of the selector. In particular, a selector of the form "[id=p33]" is counted as an attribute selector (a=0, b=0, c=1, d=0), even if the id attribute is defined as an "ID" in the source document's DTD.
Concatenating the four numbers a-b-c-d (in a number system with a large base) gives the specificity.
If the specificities are equal, then CSS 2.1 Section 6.4.1 comes into play:
Finally, sort by order specified: if two declarations have the same weight, origin and specificity, the latter specified wins. Declarations in imported style sheets are considered to be before any declarations in the style sheet itself.
Note that this is talking about when the style is defined, not when it is used. If classes .a and .b have equal specificity, whichever is defined last in the stylesheet(s) wins. <p class="a b">...</p> and <p class="b a">...</p> will be styled identically, based on the definition order of .a and .b.
Element
Class selectors
ID Selectors
Inline styles
!important
In order, 1 is the lowest specificity and 5 is the highest.
https://youtu.be/NqDb9GfMXuo will shown details to demo it.
What you are interested in is specificity.
Firebug is a great tool to help inspect this. But other browsers also have built in tools for inspecting the applied CSS rules.
You can refer the full answer here Mozilla documentation
Start from the most specific:
id selectors > class selectors > type selectors(normal h1, p tag and so on..)
!important always wins, but it is considered a bad practice.See the link above.
The best way is to experiment with it:
<!-- start class vs id -->
<p class="class1" id="id1">.class vs #id: The winner is #id</p>
<!-- upper vs bottom -->
<p id="id2">the very bottom is the winner</p>
<!--most specific is the winner -->
<p id="id3">the most specific</p>
<!--pseudo and target selector -->
<h3>pseudo vs type selector</h3>
<!-- !important is more important! -->
<h1 id="very-specific">HI! I am very important!</h1>
</body>
CSS:
#id1{
color: blue;
}
.class1{
color: red;
}
#id2{
color: yellow;
}
#id2{
color : green;
}
body p#id3{
color :orange;
}
body p{
color : purple;
}
body{
color : black;
}
h3::first-letter {
color: #ff0000;
}
h3{
color: CornflowerBlue ;
}
h1{
color: gray !important;
}
body h1#very-specific{
color: red;
}
Here's a test case.
I'd like to understand how CSS selectors work with property collisions. How is one property selected over another one?
div {
background-color: red;
}
div.my_class {
background-color: black;
}
div#my_id {
background-color: blue;
}
body div {
background-color: green;
}
body>div {
background-color: orange;
}
body>div#my_id {
background-color: pink;
}
<div id="my_id" class="my_class">hello</div>
How does selector priority work?
I'll just toss in a link to the CSS 2.1 spec itself, and how browsers are supposed to calculate specificity:
CSS 2.1 Section 6.4.3:
A selector's specificity is calculated as follows:
count 1 if the declaration is from is a 'style' attribute rather than a rule with a selector, 0 otherwise (= a) (In HTML, values of an element's "style" attribute are style sheet rules. These rules have no selectors, so a=1, b=0, c=0, and d=0.)
count the number of ID attributes in the selector (= b)
count the number of other attributes and pseudo-classes in the selector (= c)
count the number of element names and pseudo-elements in the selector (= d)
The specificity is based only on the form of the selector. In particular, a selector of the form "[id=p33]" is counted as an attribute selector (a=0, b=0, c=1, d=0), even if the id attribute is defined as an "ID" in the source document's DTD.
Concatenating the four numbers a-b-c-d (in a number system with a large base) gives the specificity.
If the specificities are equal, then CSS 2.1 Section 6.4.1 comes into play:
Finally, sort by order specified: if two declarations have the same weight, origin and specificity, the latter specified wins. Declarations in imported style sheets are considered to be before any declarations in the style sheet itself.
Note that this is talking about when the style is defined, not when it is used. If classes .a and .b have equal specificity, whichever is defined last in the stylesheet(s) wins. <p class="a b">...</p> and <p class="b a">...</p> will be styled identically, based on the definition order of .a and .b.
Element
Class selectors
ID Selectors
Inline styles
!important
In order, 1 is the lowest specificity and 5 is the highest.
https://youtu.be/NqDb9GfMXuo will shown details to demo it.
What you are interested in is specificity.
Firebug is a great tool to help inspect this. But other browsers also have built in tools for inspecting the applied CSS rules.
You can refer the full answer here Mozilla documentation
Start from the most specific:
id selectors > class selectors > type selectors(normal h1, p tag and so on..)
!important always wins, but it is considered a bad practice.See the link above.
The best way is to experiment with it:
<!-- start class vs id -->
<p class="class1" id="id1">.class vs #id: The winner is #id</p>
<!-- upper vs bottom -->
<p id="id2">the very bottom is the winner</p>
<!--most specific is the winner -->
<p id="id3">the most specific</p>
<!--pseudo and target selector -->
<h3>pseudo vs type selector</h3>
<!-- !important is more important! -->
<h1 id="very-specific">HI! I am very important!</h1>
</body>
CSS:
#id1{
color: blue;
}
.class1{
color: red;
}
#id2{
color: yellow;
}
#id2{
color : green;
}
body p#id3{
color :orange;
}
body p{
color : purple;
}
body{
color : black;
}
h3::first-letter {
color: #ff0000;
}
h3{
color: CornflowerBlue ;
}
h1{
color: gray !important;
}
body h1#very-specific{
color: red;
}
Here's a test case.
I'd like to understand how CSS selectors work with property collisions. How is one property selected over another one?
div {
background-color: red;
}
div.my_class {
background-color: black;
}
div#my_id {
background-color: blue;
}
body div {
background-color: green;
}
body>div {
background-color: orange;
}
body>div#my_id {
background-color: pink;
}
<div id="my_id" class="my_class">hello</div>
How does selector priority work?
I'll just toss in a link to the CSS 2.1 spec itself, and how browsers are supposed to calculate specificity:
CSS 2.1 Section 6.4.3:
A selector's specificity is calculated as follows:
count 1 if the declaration is from is a 'style' attribute rather than a rule with a selector, 0 otherwise (= a) (In HTML, values of an element's "style" attribute are style sheet rules. These rules have no selectors, so a=1, b=0, c=0, and d=0.)
count the number of ID attributes in the selector (= b)
count the number of other attributes and pseudo-classes in the selector (= c)
count the number of element names and pseudo-elements in the selector (= d)
The specificity is based only on the form of the selector. In particular, a selector of the form "[id=p33]" is counted as an attribute selector (a=0, b=0, c=1, d=0), even if the id attribute is defined as an "ID" in the source document's DTD.
Concatenating the four numbers a-b-c-d (in a number system with a large base) gives the specificity.
If the specificities are equal, then CSS 2.1 Section 6.4.1 comes into play:
Finally, sort by order specified: if two declarations have the same weight, origin and specificity, the latter specified wins. Declarations in imported style sheets are considered to be before any declarations in the style sheet itself.
Note that this is talking about when the style is defined, not when it is used. If classes .a and .b have equal specificity, whichever is defined last in the stylesheet(s) wins. <p class="a b">...</p> and <p class="b a">...</p> will be styled identically, based on the definition order of .a and .b.
Element
Class selectors
ID Selectors
Inline styles
!important
In order, 1 is the lowest specificity and 5 is the highest.
https://youtu.be/NqDb9GfMXuo will shown details to demo it.
What you are interested in is specificity.
Firebug is a great tool to help inspect this. But other browsers also have built in tools for inspecting the applied CSS rules.
You can refer the full answer here Mozilla documentation
Start from the most specific:
id selectors > class selectors > type selectors(normal h1, p tag and so on..)
!important always wins, but it is considered a bad practice.See the link above.
The best way is to experiment with it:
<!-- start class vs id -->
<p class="class1" id="id1">.class vs #id: The winner is #id</p>
<!-- upper vs bottom -->
<p id="id2">the very bottom is the winner</p>
<!--most specific is the winner -->
<p id="id3">the most specific</p>
<!--pseudo and target selector -->
<h3>pseudo vs type selector</h3>
<!-- !important is more important! -->
<h1 id="very-specific">HI! I am very important!</h1>
</body>
CSS:
#id1{
color: blue;
}
.class1{
color: red;
}
#id2{
color: yellow;
}
#id2{
color : green;
}
body p#id3{
color :orange;
}
body p{
color : purple;
}
body{
color : black;
}
h3::first-letter {
color: #ff0000;
}
h3{
color: CornflowerBlue ;
}
h1{
color: gray !important;
}
body h1#very-specific{
color: red;
}
Here's a test case.