I have setup the following img srcset:
<img srcset="http://via.placeholder.com/320x150 320w,
http://via.placeholder.com/480x150 480w,
http://via.placeholder.com/800x150 800w"
src="http://via.placeholder.com/800x150"
sizes="(max-width: 320px) 280px,
(max-width: 480px) 440px,
800px"
width="200" />
No matter how I set the width of the img, or how I resize the window, chrome always downloads and displays the 800px wide image. What gives? Adding sizes attribute also has no effect. I referenced this article.
Demo here: http://jsfiddle.net/7ek62m13/1/
You are using srcset the correct way. Srcset is for when you have big images and you have smaller formats on smaller devices. If you load the biggest image there is no need to load another smaller image (cause a srcset is meant for the same image). This results in when you open this code on your phone it will display the smallest image, but when you are on desktop it will open the regular image. If you upscale your browser again srcset will replace your image with a bigger image but it will never swap back to a lower image. I hope I made it a bit clearer.
Related
I am trying to load responsive images and things seem to be working in the latest version of firefox. However, my images are not loading as intended in Safari and Chrome.
<img
src="/images/pages/arrivals/02_exterior_1000.jpg"
srcset="/images/pages/arrivals/02_exterior_400.jpg 400w,
/images/pages/arrivals/02_exterior_600.jpg 600w,
/images/pages/arrivals/02_exterior_800.jpg 800w,
/images/pages/arrivals/02_exterior_1000.jpg 1000w"
alt="Blank"
/>
The goal is to have each of these images load on their respective screen. 02_exterior_400.jpg should load on screens less than 400px. 02_exterior_600.jpg loads on screens less than 600px, etc. Each of these images should be taking up 100vw.
On Chrome (see below) my page is at 386px but it's loading the 800px image and I want it to load the 400px:
Same issue on Safari. What am I doing incorrectly?
Edit: Chrome/Safari seem to be doubling my screen width when deciding which image to load. For example: if my screen is at 350px the browser is interpreting it at as 700px and then loading 02_exterior_800.jpg.
Any help appreciated,
thanks
You may be missing the "sizes" attribute. Also, put the regular "src" attribute after the "srcset" attribute. This is used as a fallback if the first srcset is either not supported, or the images are not found.
<img srcset="/images/pages/arrivals/02_exterior_400.jpg 400w,
/images/pages/arrivals/02_exterior_600.jpg 600w,
/images/pages/arrivals/02_exterior_800.jpg 800w,
/images/pages/arrivals/02_exterior_1000.jpg 1000w"
sizes="(max-width: 400px) 400px,
(max-width: 600px) 600px,
(max-width: 800px) 800px,
1000px"
src="/images/pages/arrivals/02_exterior_1000.jpg" alt="A Sense of Arrival">
I have a web page design where the layout size and image sizes are based on em's. For example:
<html style="width:50em; font-size:16pt">
<body>
<p>Lorem ipsum
<img src="..." style="float:right; width:20em">
</p>
</body>
</html>
Because the image size is specified in em's, it is always in lockstep with the text size. Unfortunately, we don't know how many CSS pixels wide an image is. We also don't know how many device pixels wide an image is, which depends on the size of an em, the magnification, etc.
The <img> srcset and sizes attributes appear to be nearly the solution I want. But I'm not sure if it applies to my situation here. I can generate multiple asset sizes, e.g. 320×240, 480×360, 640×480, etc.
I want the web browser to look at the content box for the <img> element, calculate how many device pixels wide it is, and download the most appropriate image from a list of alternatives. How can I do this?
Note: I did read about the srcset x syntax, but it doesn't seem to be the right tool.
Srcset is definitely a great way to approach this. You basically have a number of images you save out for multiple sizes, usually you'll want to have the image be the same width of the element if possible. Then you set the image that you want to use for each screen width.
<img src="image.jpg" alt="Name"
srcset="
/img-2400.jpg 2400w,
/img-1800.jpg 1800w,
/img-1200.jpg 1200w,
/img-900.jpg 900w,
/img-600.jpg 600w,
/img-400.jpg 400w"
sizes = "(min-width: 2400px) 900px,
(min-width: 1800px) 600px,
(min-width: 1200px) 500px,
(min-width: 900px) 500px,
(min-width: 600px) 600px,
400px" />
So /img-2400.jpg 2400w would use /img-2400.jpg when the screen is closest to 2400px wide.
In the sizes attribute, you can also specify if what the image size will be at certain screen sizes as it may not always be 100% of the width of the browser.
So (min-width: 2400px) 900px is telling the browser that when the window is at least 2400px wide, the image will be 900px wide on the screen. So that should be telling the browser to then grab /img-900.jpg when the window is 2400px wide since that image is set to 900w which is the closest to 900px (its exact).
You can still approximately calculate this if you are using em, by multiplying the em you are using by 16 (this may vary depending on browser settings or settings you impose in your css). So if you set your width of an image in css to be 20em, thats 16 * 20 = 320px.
When these are used in combination, modern browsers should be able to detect the best image to grab dependent on the screen size. See browser compatability for srcset here: https://caniuse.com/#search=srcset
Based on Eric Portis's article, this solves the problem:
<img style="width:20em" sizes="20em"
src="pic-1000.png"
srcset="
pic-150.png 150w,
pic-220.png 220w,
pic-330.png 330w,
pic-470.png 470w,
pic-680.png 680w,
pic-1000.png 1000w">
After the web page is loaded, if the most appropriate image changes for some reason (e.g. using zoom to change the device pixel ratio), then Firefox will always change the image to the most appropriate one at the moment. By contrast, Chrome seems to change the image if the new one is bigger, but won't change to a small image unless you reload the page - the image resolution is sticky upwards.
I use picturefill.js for responsive image feature. When I place original image without specifying height and width, image is shown in <picture> tag and pull up different size of same images according to screen size.
But when i specify height and width, responsive feature does not work. Image is loaded with <img> tag.
here is link
The documentation of the library explains you should manage the image size by using the sizes tag:
<img
sizes="(min-width: 40em) 80vw, 100vw"
srcset="examples/images/medium.jpg 375w,
examples/images/large.jpg 480w,
examples/images/extralarge.jpg 768w"
alt="…">
By defining a style with a width and height you are forcing the image to keep that aspect.
From the site:
The sizes syntax is used to define the spaces your image will occupy in your layout. srcset then defines a list of images and their inherent widths. This allows the browser to choose the smallest appropriate source for the size available in that part of the layout, rather than the viewport size alone.
I have 2 images: one desktop version, one mobile version.
I would like the desktop image to be replaced by the mobile image when the viewport width resizes below 480px, just as would with the following CSS with background-image property :
.logo { background-image: url(http://placehold.it/400x200&text=desktop); }
media screen and (max-width: 480px) {
.logo { background-image: url(http://placehold.it/300x150&text=mobile); }
}
I thought I could achieve this with the srcset HTML attribute :
<img src="http://placehold.it/400x200&text=desktop" alt="" srcset="http://placehold.it/300x150&text=mobile 480w">
But it does not work, the browser shows the mobile image all the time and rescales it on viewport resize, but I wish the 2 images remains in their respective original size.
Is it possible to achieve this behavior with srcset?
It sounds like you want to do "art direction", i.e. the images are different more than just the smaller being scaled down version of the bigger image. If so, you need to use the picture element.
<picture>
<source srcset="http://placehold.it/300x150&text=mobile"
media="(max-width: 480px)">
<img src="http://placehold.it/400x200&text=desktop" alt="...">
</picture>
However, if your small image is actually a scaled-down version of the bigger image, then you can use srcset, but then you have no control over which image gets chosen. It's up to the browser to pick the best one based on screen density, network conditions, user preference, browser cache, etc.
<img src="http://placehold.it/400x200&text=desktop"
srcset="http://placehold.it/400x200&text=desktop 400w,
http://placehold.it/300x150&text=mobile 300w"
sizes="(max-width: 480px) 300px, 400px">
Note: If srcset is used and the larger image candidate is in cache, Chrome will always display this cached image candidate - no matter of the actual viewport size.
I want to know how could I start using the HTML srcset img attribute in my mobile apps. Or Is there any other jQuery plugin which helps me to solve image resolution problem.
<img srcset="banner-HD.jpeg 2x, banner-phone.jpeg 100w, banner-phone-HD.jpeg 100w 2x" alt="Banner Image" />
In short, Srcset is a new attribute which allows you to specify different kind of images for different screen-sizes/orientation/display-types. The usage is really simple, you just provide a lot of different images separating them with a comma like this: <img src="image.jpg" alt="image" srcset="<img> <descriptor>, ..., <img_n> <descriptor_n>">. Here is an example: srcset="image.jpg 160w, image2.jpg 320w, image3.jpg 2x"
This is a longer answer which explains things in more details.
Difference between srcset and picture. Both srcset and picture does approximately the same things, but there is a subtle difference: picture dictates what image the browser should use, whereas srcset gives the browser a choice. A lot of things can be used to select this choice like viewport size, users preferences, network condition and so on. The support for srcset is pretty good and almost all current browsers more or less support it. Situation with a picture element is a little bit worse.
Descriptors are just a way to show what kind of image is hidden behind the resource. There are various kinds of descriptors:
density descriptor. srcset="image.jpg, image-2X.jpg 2x"
The display density values—the 1x, 2x, etc.—are referred to as display density descriptors. If a display density descriptor isn’t provided, it is assumed to be 1x. Good variant to target retina displays.
width descriptor. srcset="image-240.jpg 240w, image-640.jpg 640w". I am sure this is self explanatory. The only problem is that by itself width descriptor is not really helpful. Why? read here
size descriptor, which only makes sense if you use width descriptor. srcset="image-160.jpg 160w, image-320.jpg 320w, image-640.jpg 640w, image-1280.jpg 1280w" sizes="(max-width: 480px) 100vw, (max-width: 900px) 33vw, 254px">. The instructions for the browser would look like this: (max-width: 480px) 100vw — if the viewport is 480 pixels wide or smaller, the image will be 100% of the viewport width. (max-width: 900px) 33vw — if the viewport is 480 pixels wide or smaller, this rule will never be reached because of the previous media condition. And 254px is when there is no media condition listed, the length is assumed to be a default value used when none of the other media conditions are met.
Just for completeness will add here that there is an image-set() attribute for a background image in CSS and some other helpful link here
Here is a detailed guide on srcset along with code samples.
srcset allows you to define a list of different image resources along with size information so that browser can pick the most appropriate image based on the actual device’s resolution.
Each comma-separated item in srcset has:
Image URL, e.g. http://ik.imagekit.io/demo/default-image.jpg or relative path /demo/default-image.jpg
An empty space
The actual width of the image or display density:
Either using display density descriptor, for example, 1.5x, 2x etc.
Or, using width descriptors, for example, 450w. This is the width of the image in pixels.
Using display density descriptor
The syntax for display density descriptors is straightforward. srcset provides a comma-separated list of image resources along with display density it should be used, for example1x, 2x etc.
<img src="image.jpg"
srcset="image.jpg,
image_2x.jpg 2x"
/>
Live demo - https://imagekitio.github.io/responsive-images-guide/srcset-density.html.
Using width descriptor
The syntax is similar to the display density descriptor, but instead of display density values, we provide the actual width of the image.
<img src="image.jpg"
srcset="small.jpg 300w,
medium.jpg 600w,
large.jpg 900w"
/>
This lets the browser pick the best image
Using width descriptor allows the browser to pick the best candidate from srcset based on the actual width needed to render that image on that particular display at runtime.
Note that display pixel density is also taken into account by the browser while calculating the required width. 😎
For example, assuming an image takes up the whole viewport width - On a 300px wide screen with DPR 2, the browser will pick medium.jpg because it needs a 300x2=600px wide image. On a 300px wide screen with DPR value 3, the browser will select large.jpg because it needs a 300x3=900px wide image.
Demo - srcset with width descriptor
Let see this in action with a live demo - https://imagekitio.github.io/responsive-images-guide/srcset-width.html.
Here is a good article on the srcset attribute and how to use it. srcet allows you to declare a set of images to be displayed on different viewport sizes. You just have to save and image at different resolutions e.g. banner-phone-HD.jpeg would be the highest resolution.
Exmaple:
<img alt="my awesome image"
src="banner.jpeg"
srcset="banner-HD.jpeg 2x, banner-phone.jpeg 640w, banner-phone-HD.jpeg 640w 2x">
The above would serve banner-phone.jpeg to devices with viewport width under 640px, banner-phone-HD.jpeg to small screen high DPI devices, banner-HD.jpeg to high DPI devices with screens greater than 640px, and banner.jpeg to everything else.
There are also other methods like CSS media queries you can use to produce the same effect.
I am not aware of any JQuery plugins which would help with this.