I'm building a Razor Page app using ASP.NET 2017. When I run the command
dotnet aspnet-codegenerator razorpage -m Activity -dc CongContext -udl -outDir Page\Activities --referenceScriptLibraries
This error appears:
Could not load file or assembly 'Microsoft.EntityFrameworkCore,
Version=2.0.3.0, Culture=neutral, PublicKeyToken=adb9793829ddae60'.
The located assembly's manifest definition does not match the assembly
reference. (Exception from HRESULT: 0x80131040)
I stopped and restarted VS, I've also cleaned and build the solution. Attached jpg shows the code I typed and the results
This is because of different versions of packages. Check the 'Dependencies' node of your project. The Microsoft.EntityFrameworkCore and Microsoft.EntityFrameworkCore.Design must have same 2.0.3 versions.
If not, delete and re-add them from [Tools] menu > [Nuget Package Manager]. Also delete the Migrations folder and repeat instructions as listed here. For more info, you may take a look at this comment
Related
Microsoft announced the expiration of Basic Authentication in Exchange Online except STMP AUTH, but no guarantee on using it for long term. So, I decide to start the change with our Reports delivery in SSRS 2016 which mainly via SMTP email right now.
After reading many sources, I found that SSRS has Report Delivery Extension which we can build assembly to customize new Delivery Method, and from here I can send the Report Email through Microsoft Graph & Azure Identity.
Link of delivery extension
In the Project, I added Nuget Package of:
Microsoft Graph package version 4.47
Azure Identity version 1.8
the VS automatically add other dependencies to project and I can build the project successfully without any Warnings or Error
However, deploying the assembly to SSRS, after the subscription runs, I got the error in the log as following:
notification!WindowsService_0!59ac!11/18/2022-16:42:08:: i INFO: Notification 27e69a92-12b9-4ab8-984f-d5910af77de7 completed. Success: True, Status: Error: Could not load file or assembly 'Microsoft.Identity.Client, Version=4.46.0.0, Culture=neutral, PublicKeyToken=0a613f4dd989e8ae' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
I check carefully the dependency of other assembly in nuget website, but nothing indicates that I'm using wrong version. The Microsoft.Identity.Client.dll file is copied to Bin folder of ReportServer.
I tried to update the Microsoft.Identity.Client.dll file with version 4.46.0 in nuget (ignore the dependencies), but another assembly version mismatch comes up:
notification!WindowsService_0!4d94!11/17/2022-23:59:03:: i INFO: Notification b82bb214-3880-4f80-857b-cdf42cde8ff0 completed. Success: True, Status: Error: Could not load file or assembly 'System.Diagnostics.DiagnosticSource, Version=4.0.4.0, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
And now, I could not find the System.Diagnostics.DiagnosticSource.dll with version 4.0.4.
I can only find version 4.0.0 or 4.3 above.
Now I'm stuck here.
Does anyone have experience on this?
How can I bypass this dependency check?
I even try to downgrade version of Azure.Identity version to lower one, but still stop at the System.Diagnostics version 4.0.4
Then I create a Console Application which I just send a test email with all latest version of assembly Azure.Identity and Microsoft.Graph on the same server (same .Net Framework 4.7.2 and same firewall configuration). It can be sent sucessfully.
I'm in doubt that SSRS 2016 has any assembly confliction which point to lower version of those assemblies.
I have the exact same problem, but with building an add-on for Act! for Windows. My code works outside Act! in a standalone .NET 4.7.2 app, but I get the exact same conflict as described above when loaded within Act!. That said, Act! itself doesn't even use Microsoft.Identity.Client (that dll is not part of it)
I have existing app that uses MySQL Server. Some errors I was getting when trying to add a new feature led me to upgrading to 'MySql.Data.EntityFramework 8.0.11'.
error I am getting when on:
public CitiesContext() : base("name=CitiesContext"):
An error occurred creating the configuration section handler for entityFramework: Could not load file or assembly 'EntityFramework, Version=4.6.1.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Under my properties, my target framework is still version 4.6.1.
Is there a 'how to document' somewhere on how to upgrade the EntityFrame work? I know several of the other installed packages were installed while targeting v 4.6.1, so lots of other types of errors using (like hay this was compiled with v 4.6) when trying to compile with a web.congf using
I have installed
PM> Install-Package EntityFramework -Version 6.4.4
Package 'EntityFramework.6.4.4' already exists in project 'Lat34North'
Time Elapsed: 00:00:00.0186347
Please note. This is a hobby for me, not a profession. The app is written using asp.net mvs an first issued in 2018. Do I just need to change the target in the properties and upgrade all the other packages??
Thank you for any help.
I'm trying to get the Codeunit 50000 in this zip file to work: https://kappiwebhosting.blob.core.windows.net/dynamcisis/2015/09/Json.zip
Found here: https://dynamics.is/?p=2303
C/AL Globals
I'm trying to get Dynamics Nav 2009 to recognize the NewtonSoft.Json.dll, but no matter which version i try, i get this error as soon i want to verify the DotNet variable "JsonTextReader"/"JsonTextWriter" when selecting the subtype.
.NET interop: exception occured, 'Could not load file or assembly 'Newtonsoft.Json, Version=4.5.0.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.'.
If i declare a new Test variable of type DonNet and click [...] to select it from scratch i got this error when trying to choose which assembly to use:
.NET interop: exception occured, 'Could not load file or assembly 'C:\Program Files (x86)\Microsoft Dynamics NAV\60\Classic\Add-ins\Newtonsoft.Json.dll' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.'.
The Newtonsoft.Json.dll file is present ind the folder, and "Everyone" have full control to the folder as well as the file.
The Json.zip file contain a single Newtonsoft.Json.dll which i started out with. Same error. The i downloaded the https://github.com/JamesNK/Newtonsoft.Json/releases and tried all versions with the same result.
Why all this? Yes, the company i work for have decided to start using Shopify, and i need to write an interface for getting orders from Shopify etc.
I really cannot figure out why i can't get this to work. There are 3 other DotNet "variables" that's configured and works as intended with no errors.
So any advice is highly appreciated.
Thanx
I have a ASP.Net website that connects to a MySQL data base to retrieve data. I have used NuGet to install mysql.data. Doing this added a Bin folder with the sql.data dll in it to my project. It added a reference in my web config file. and it added a packages.config to my project. All of this is expected i assume ? With these resources in place my website works when i run it from visual studio. The problem is when i upload it to a server i get the following error :
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'MySql.Data, Version=6.9.8.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies. The system cannot find the file specified.
Source Error:
An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Source File: d:\DZHosts\LocalUser\bman262\www.brandonsLoginTest.somee.com\riviera horticulture\web.config Line: 7
Assembly Load Trace: The following information can be helpful to determine why the assembly 'MySql.Data, Version=6.9.8.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.6.1069.1
This is saying it cant find the mysql.data reference right ? What am i doing wrong ?
Here are some pictures of my solution in visual studio and my web.config
Solution
Web.config
I am tearing my hair out over this, any help would be VERY appreciated
→ You will have to make sure that the same version is installed on the server where you are deploying your project.
→ If the server to which you are deploying your project is on 64 bit, you can enable 32 bit support for this site's application pool, if your dll requires 32 bit architecture.
For anyone using similar or the same host as me if you have this problem the solution was to convert the project file to an application on the server.
Is it possible to deploy a Single Page App project build using grunt to IIS using MSDeploy from TeamCity? The project is not any kind of Visual Studio solution and doesn't get built using MSBuild.
My Command parameters which are not working are:
-source:package='%teamcity.build.checkoutDir%\Dist.%build.number%.zip' -dest:auto,computerName="%system.MsDeployServiceUrl%",userName="%system.UserName%",password="%system.Password%",authtype="basic",includeAcls="False"
-verb:sync -setParamFile:"%teamcity.build.checkoutDir%\Dist.%build.number%.zip.SetParameters.xml"
-AllowUntrusted -setParam:"IIS Web Application Name"="%system.WebSiteName%" -verbose
The error I am getting is:
[11:47:31][Step 3/3] Error Code: ERROR_EXCEPTION_WHILE_CREATING_OBJECT
[11:47:31][Step 3/3] More Information: Object of type 'package' and
path 'D:\TeamCity\buildAgent\work\e2b0015b49d87e90\Dist.30.zip' cannot
be created. Learn more at:
http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_EXCEPTION_WHILE_CREATING_OBJECT.
[11:47:31][Step 3/3] Error: The Zip package
'D:\TeamCity\buildAgent\work\e2b0015b49d87e90\Dist.30.zip' could not
be loaded. [11:47:31][Step 3/3] Error: Could not find file
'D:\TeamCity\buildAgent\work\e2b0015b49d87e90\Dist.30.zip'.
[11:47:31][Step 3/3] Error count: 1. [11:47:31][Step 3/3] Process
exited with code -1 [11:47:31][Step 3/3] Step Deploy (Command Line)
failed
My build process is working as I end up with the correct artefacts, I just don't seem to be able to deploy my generated artefacts using MSDeploy
This is a screenshot of my artefacts:
I managed to get this working by changing my parameters to the following:
-source:iisapp='%teamcity.build.checkoutDir%\dist' -dest:iisapp='C:\www\xxxx-website',computerName="%system.MsDeployServiceUrl%",userName="%system.UserName%",password="%system.Password%",authtype="basic",includeAcls="False"
-verb:sync -AllowUntrusted -verbose
And changing my user to an admin user rather than an IIS user. Note use of iisapp - the key was to read the MSDeploy api using msdeploy -help
FYI - a good test is to use the intended command against msdeploy.exe in console and check output errors then push command into teamcity when it's working.
I created a grunt and gulp plugin to do just what you are looking to do. gulp-mswebdeploy-package and grunt-mswebdeploy-package will create a ms webdeploy package from any folder and do not require your build to be running on windows.
https://www.npmjs.com/package/gulp-mswebdeploy-package
https://www.npmjs.com/package/grunt-mswebdeploy-package