I using freeradius 2.2.8 and mysql for sending our coa/disconnect messages via freeradius when a bandwidth quota is hit. That part of the code is working great. Unfortunately for me the coa/disconnect message is sent out even though an Accounting Stop is sent out by the NAS. In order to prevent that from happening I am putting a condition where in I pull the acct termination cause from mysql radacct table and compare it against some strings.
Under accounting,
update control {
....
Tmp-String-0 := "%{sql:SELECT acctterminatecause AS Terminate FROM radacct WHERE radacct.username='%{User-Name}' AND radacct.acctsessionid='%{Acct-Session-Id}'}}"
***if ("%{control:Tmp-String-0}" != "User-Request")***{
if (("%{control:Tmp-Integer-0}" > "%{control:Tmp-Integer-2}") || ("%{control:Tmp-Integer-1}" > "%{control:Tmp-Integer-3}")){
if ("%{control:coa_dm}" == "coa"){
update coa {
User-Name = "%{User-Name}"
Acct-Session-Id = "%{Acct-Session-Id}"
NAS-IP-Address = "%{NAS-IP-Address}"
#Filter-Id = "UN-AUTHORIZED-PROFILE"
Framed-IP-Address = "%{Framed-IP-Address}"
Session-Timeout = 10
}
}
if ("%{control:coa_dm}" == "dm"){
update disconnect {
User-Name = "%{User-Name}"
NAS-IP-Address = "%{NAS-IP-Address}"
}
}
}
}
As per the freeradius debug logs we can see that the string should be a match and the program should avoid the inside if conditions. Unfortunately that is not the case and the 1st IF condition always returns true.
***Thu May 17 17:43:41 2018 : Info: expand: SELECT acctterminatecause AS Terminate FROM radacct WHERE radacct.username='%{User-Name}' AND radacct.acctsessionid='%{Acct-Session-Id}' -> SELECT acctterminatecause AS Terminate FROM radacct WHERE radacct.username='kiranc' AND radacct.acctsessionid='5AFD71CB-3FE1C000'
Thu May 17 17:43:41 2018 : Debug: rlm_sql (sql): Reserving sql socket id: 16
Thu May 17 17:43:41 2018 : Info: sql_xlat finished
Thu May 17 17:43:41 2018 : Debug: rlm_sql (sql): Released sql socket id: 16
Thu May 17 17:43:41 2018 : Info: expand: %{sql:SELECT acctterminatecause AS Terminate FROM radacct WHERE radacct.username='%{User-Name}' AND radacct.acctsessionid='%{Acct-Session-Id}'}} -> User-Request}
Thu May 17 17:43:41 2018 : Info: ++} # update control = noop
Thu May 17 17:43:41 2018 : Info: ++? if ("%{control:Tmp-String-0}" != "User-Request")
Thu May 17 17:43:41 2018 : Info: expand: %{control:Tmp-String-0} -> User-Request}
Thu May 17 17:43:41 2018 : Info: ? Evaluating ("%{control:Tmp-String-0}" != "User-Request") -> TRUE***
Thu May 17 17:43:41 2018 : Info: ++? if ("%{control:Tmp-String-0}" != "User-Request") -> TRUE
Thu May 17 17:43:41 2018 : Info: ++if ("%{control:Tmp-String-0}" != "User-Request") {
Thu May 17 17:43:41 2018 : Info: +++? if (("%{control:Tmp-Integer-0}" > "%{control:Tmp-Integer-2}") || ("%{control:Tmp-Integer-1}" > "%{control:Tmp-Integer-3}"))
Thu May 17 17:43:41 2018 : Info: expand: %{control:Tmp-Integer-0} -> 3169
Thu May 17 17:43:41 2018 : Info: expand: %{control:Tmp-Integer-2} -> 25000000
Thu May 17 17:43:41 2018 : Info: ?? Evaluating ("%{control:Tmp-Integer-0}" > "%{control:Tmp-Integer-2}") -> FALSE
Thu May 17 17:43:41 2018 : Info: expand: %{control:Tmp-Integer-1} -> 13402
Thu May 17 17:43:41 2018 : Info: expand: %{control:Tmp-Integer-3} -> 50000000
I tried the single quotes, double quotes using the & instead of %, but to no avail. The other conditions are met correctly when hit as they are returned as integers.
Thank you for the help.
I forgot to mention that I had got it working. Instead of comparing using Tmp-String-0 variable I just used the actual radius attribute name and got it working.
if (("%{Acct-Terminate-Cause}" != "User-Request")
Thank you for the help.
Related
I'm trying to read from a DATETIME field in MySQL using the Apps Script JDBC service. The database has its timezone set to UTC (##global.time_zone == ##session.time_zone == '+00:00'), and I've double-checked this by doing SELECT UNIX_TIMESTAMP(COL) FROM TABLE. My script is also set to use UTC.
However, when I read the value from the JDBC result set using getTimestamp, it is skewed forwards by 8 hours. This occurs regardless of whether I pass a timezone to getTimestamp (indeed, there is no change whatsoever, regardless of what timezone I pass), and regardless of whether useJDBCCompliantTimeZoneShift is enabled or not.
If I read the result using getString, it gives the correct time (in UTC). Barring using getString and parsing it into a JavaScript Date, how can I fix this issue?
Edit
Here's a testing script I used, and its output:
export function tzTest(): void {
const dbIp = DB_IP
const dbPw = DB_PW
let conn = Jdbc.getConnection(`jdbc:mysql://${dbIp}/mydb`, { user: "myuser", password: dbPw })
let stmt = conn.prepareStatement("SELECT COL FROM MYTABLE WHERE OWNER_ID=1")
stmt.execute()
let res = stmt.getResultSet()
res.next()
console.log("==== DEFAULT ====")
console.log("=== getTimestamp ===")
console.log(`plain: ${new Date(res.getTimestamp(1).getTime())} (${res.getTimestamp(1).getTime()})`)
console.log(`utc: ${new Date(res.getTimestamp(1, "UTC").getTime())} (${res.getTimestamp(1, "UTC").getTime()})`)
console.log("=== getTime ===")
console.log(`plain: ${new Date(res.getTime(1).getTime())} (${res.getTime(1).getTime()})`)
console.log(`utc: ${new Date(res.getTime(1, "UTC").getTime())} (${res.getTime(1, "UTC").getTime()})`)
console.log("=== getDate ===")
console.log(`plain: ${new Date(res.getDate(1).getTime())} (${res.getDate(1).getTime()})`)
console.log(`utc: ${new Date(res.getDate(1, "UTC").getTime())} (${res.getDate(1, "UTC").getTime()})`)
conn.close()
conn = Jdbc.getConnection(`jdbc:mysql://${dbIp}/mydb`, { user: "myuser", password: dbPw, useJDBCCompliantTimeZoneShift: true })
stmt = conn.prepareStatement("SELECT COL FROM MYTABLE WHERE OWNER_ID=1")
stmt.execute()
res = stmt.getResultSet()
res.next()
console.log("==== useJDBCCompliantTimeZoneShift ====")
console.log("=== getTimestamp ===")
console.log(`plain: ${new Date(res.getTimestamp(1).getTime())} (${res.getTimestamp(1).getTime()})`)
console.log(`utc: ${new Date(res.getTimestamp(1, "UTC").getTime())} (${res.getTimestamp(1, "UTC").getTime()})`)
console.log("=== getTime ===")
console.log(`plain: ${new Date(res.getTime(1).getTime())} (${res.getTime(1).getTime()})`)
console.log(`utc: ${new Date(res.getTime(1, "UTC").getTime())} (${res.getTime(1, "UTC").getTime()})`)
console.log("=== getDate ===")
console.log(`plain: ${new Date(res.getDate(1).getTime())} (${res.getDate(1).getTime()})`)
console.log(`utc: ${new Date(res.getDate(1, "UTC").getTime())} (${res.getDate(1, "UTC").getTime()})`)
conn.close()
}
This results in the following output:
==== DEFAULT ====
=== getTimestamp ===
plain: Sat Dec 21 2019 15:39:17 GMT+0000 (Coordinated Universal Time) (1576942757000)
utc: Sat Dec 21 2019 15:39:17 GMT+0000 (Coordinated Universal Time) (1576942757000)
=== getTime ===
plain: Thu Jan 01 1970 15:39:17 GMT+0000 (Coordinated Universal Time) (56357000)
utc: Thu Jan 01 1970 15:39:17 GMT+0000 (Coordinated Universal Time) (56357000)
=== getDate ===
plain: Sat Dec 21 2019 08:00:00 GMT+0000 (Coordinated Universal Time) (1576915200000)
utc: Sat Dec 21 2019 00:00:00 GMT+0000 (Coordinated Universal Time) (1576886400000)
==== useJDBCCompliantTimeZoneShift ====
=== getTimestamp ===
plain: Sat Dec 21 2019 15:39:17 GMT+0000 (Coordinated Universal Time) (1576942757000)
utc: Sat Dec 21 2019 15:39:17 GMT+0000 (Coordinated Universal Time) (1576942757000)
=== getTime ===
plain: Thu Jan 01 1970 15:39:17 GMT+0000 (Coordinated Universal Time) (56357000)
utc: Thu Jan 01 1970 15:39:17 GMT+0000 (Coordinated Universal Time) (56357000)
=== getDate ===
plain: Sat Dec 21 2019 08:00:00 GMT+0000 (Coordinated Universal Time) (1576915200000)
utc: Sat Dec 21 2019 00:00:00 GMT+0000 (Coordinated Universal Time) (1576886400000)
For comparison, SELECT COL,(UNIX_TIMESTAMP(COL) * 1000) FROM MYTABLE WHERE OWNER_ID=1 gives 2019-12-21 07:39:17 and 1576913957000.
This issue seems to be a bug in the past and should already be fixed.
Including useJDBCCompliantTimezoneShift=true in the connection parameter should fix the issue to interpret the timezone correctly.
Noting here that the timezone shown when converting a JavaScript Date to a string will always be the timezone of the server (in this case UTC) that's why your workaround fixed it.
I am trying to filter out the JSON response values by passing on few parameters dynamically. Below is the code.
import com.eviware.soapui.support.XmlHolder
import groovy.json.JsonSlurper
responseContent = testRunner.testCase.getTestStepByName("Request 1").getPropertyValue("Response")
jsonresponse = new JsonSlurper().parseText(responseContent)
log.info jsonresponse.context["parameter"]
context["parameter"] stores the values from an Excel sheet and doing only a log.info for context["parameter"], it shows those values correctly. Below is the output of the code log.info context["parameter"].
Thu Dec 14 07:18:53 CST 2017:INFO:firstName
Thu Dec 14 07:18:53 CST 2017:INFO:lastName
Thu Dec 14 07:18:54 CST 2017:INFO:frNum
Thu Dec 14 07:18:54 CST 2017:INFO:notes
But when I execute the code
log.info jsonresponse.context["parameter"]
Result:
Thu Dec 14 07:20:41 CST 2017:INFO:[]
Thu Dec 14 07:20:41 CST 2017:INFO:[]
Thu Dec 14 07:20:41 CST 2017:INFO:[]
Thu Dec 14 07:20:42 CST 2017:INFO:[]
Thu Dec 14 07:20:42 CST 2017:INFO:[]
log.info jsonresponse yields the below response out of which I need to get certain values (values stored in the context["parameter"])
Thu Dec 14 07:21:45 CST 2017:INFO:[{errorMessage=null, middleName=null, lastName=Kosnick, frName=Kosnick Steven H , mplastName=null, competeRgnTxt=null, doNum=null, gddUnitStDate=null, fdNum=null, mpfirstName=null, legalEntityID=null, noNum=null, contractType=Financial Rep, frNum=046426, offcNum=NO 091, notes=Active, fullTmeSrvDt=null, firstName=Steven, networkOfficeNum=091}]
Instead of this :
log.info jsonresponse.context["parameter"]
Try this :
log.info jsonresponse[context["parameter"]]
This should resolve your issue :)
I have used this query to retrieve the dates for one particular user's approved leaves -
LeaveRequest.where(user_id: 6).where(status: 1).pluck(:from_date, :to_date)
and I'm getting this array as result -
[[Mon, 12 Sep 2016, Fri, 16 Sep 2016], [Tue, 06 Sep 2016, Tue, 06 Sep 2016], [Thu, 01 Sep 2016, Fri, 02 Sep 2016], [Tue, 30 Aug 2016, Wed, 31 Aug 2016]]
what I want is to fetch all the dates as well as the dates between 12 Sep 2016 and 16 Sep, 2016 (13th 14th and 15th).
I am assuming you mean something like this
require 'date'
#This is to simulate your current Array
current_array = 5.times.map {|n [Date.new(2016,n+1,1).<<(1),Date.new(2016,n+1,1)]}
#map the 2 dates to a Range
new_array = current_array.map{|start_date,end_date| (start_date..end_date)}
new_array.first.class
#=> Range
Calling to_a on the Range will blow it out into all the dates between start_date and end_date
With a rails you could do something like
class LeaveRequest
def self.user_requested_ranges(user_id, status_id)
scoped.
where(user_id: user_id, status: status_id).
pluck(:from_date, :to_date).
map do |from_date, to_date|
#optionally to output the full Array in each Range you could use
#(from_date..to_date).to_a
(from_date..to_date)
end
end
end
Then call as
LeaveRequest.user_requested_ranges(6,1)
I tried to log mysql statements , executed by jdbc , hoping to see strings containing declare some cursor or fetch some cursor. But there was not.
Are there any ways to see them?
PS i set variables in mysql as following:
SET GLOBAL log_output="FILE"
SET GLOBAL general_log_file="Path/File"
SET GLOBAL general_log='ON'
Try this.
Add 'logger' and 'profileSQL' to the jdbc url:
&logger=com.mysql.jdbc.log.Slf4JLogger&profileSQL=true
Then you will get the SQL statement below:
2016-01-14 10:09:43 INFO MySQL - FETCH created: Thu Jan 14 10:09:43 CST 2016 duration: 1 connection: 19130945 statement: 999 resultset: 0
2016-01-14 10:09:43 INFO MySQL - QUERY created: Thu Jan 14 10:09:43 CST 2016 duration: 1 connection: 19130945 statement: 999 resultset: 0 message: SET sql_mode='NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES'
2016-01-14 10:09:43 INFO MySQL - FETCH created: Thu Jan 14 10:09:43 CST 2016 duration: 1 connection: 19130945 statement: 999 resultset: 0
2016-01-14 10:09:43 INFO MySQL - QUERY created: Thu Jan 14 10:09:43 CST 2016 duration: 2 connection: 19130945 statement: 13 resultset: 17 message: select 1
2016-01-14 10:09:43 INFO MySQL - FETCH created: Thu Jan 14 10:09:43 CST 2016 duration: 0 connection: 19130945 statement: 13 resultset: 17
2016-01-14 10:09:43 INFO MySQL - QUERY created: Thu Jan 14 10:09:43 CST 2016 duration: 1 connection: 19130945 statement: 15 resultset: 18 message: select ##session.tx_read_only
2016-01-14 10:09:43 INFO MySQL - FETCH created: Thu Jan 14 10:09:43 CST 2016 duration: 0 connection: 19130945 statement: 15 resultset: 18
2016-01-14 10:09:43 INFO MySQL - QUERY created: Thu Jan 14 10:09:43 CST 2016 duration: 2 connection: 19130945 statement: 14 resultset: 0 message: update sequence set seq=seq+incr where name='demo' and seq=4602
2016-01-14 10:09:43 INFO MySQL - FETCH created: Thu Jan 14 10:09:43 CST 2016 duration: 0 connection: 19130945 statement: 14 resultset: 0
The default logger is:
com.mysql.jdbc.log.StandardLogger
Mysql jdbc property list: https://dev.mysql.com/doc/connector-j/en/connector-j-reference-configuration-properties.html
I want to create a function for a calender programm, that does the following:
proceed :: Day -> Int -> Day
> proceed Mon 9
Wed
The function proceed should tell me, what weekday it is in 9 days, if today is Monday.
Now I try this:
data Day = Mon | Tue | Wed | Thu | Fri | Sat | Sun deriving Show
next :: Day -> Day
next Mon = Tue
next Tue = Wed
next Wed = Thu
next Thu = Fri
next Fri = Sat
next Sat = Sun
next Sun = Mon
proceed :: Day -> Int -> Day
proceed d a = if a==0 then next d
else proceed (next d) (a-1)
I try :
proceed Mon 9
Thu
But that's wrong, the right answear is Wed!!!!!!!
I don't know where I've made the mistake.
Thanks to bheklilr
if a == 0 then d else proceed (next d) (a-1)
It was only an off by one error!