I am using below code to create an Elastic Beanstalk env. Now I am getting error suddenly. It was working fine, getting issue since I have restarted jenkins. terraform apply commands is running from jenkins. terraform data part is from main.tf. For more info - I am installing terraform using below command line. I have read this question, but scenario is different.
sh 'wget https://releases.hashicorp.com/terraform/0.14.5/terraform_0.14.5_linux_amd64.zip'
sh 'unzip terraform_0.14.5_linux_amd64.zip
sh 'mv ./terraform /usr/bin/'
sh 'terraform init'
sh "terraform apply -auto-approve -var \'env=${ENVNAME}\' -var \'appversion=${APPVERSION}\' -var \'sshkey=${SSHKEY}\'"
data "aws_elastic_beanstalk_solution_stack" "multi_docker" {
most_recent = true
name_regex = "^64bit Amazon Linux (.*) Multi-container Docker (.*)$"
}
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but will not be
persisted to local or remote state storage.
data.aws_elastic_beanstalk_solution_stack.multi_docker: Refreshing state...
Error: Your query returned no results. Please change your search criteria and try again.
Based on the comments.
The aws_elastic_beanstalk_solution_stack is correct. However, multidocker container EB environments are not supported in all regions. The solution was to use a region which has support for the multidocker containers.
I wanted to run terraform and then be able to run kubectl in the cli right after terraform completes. Or is this something you don't do. I would want to make a script to run kubectl commands after terraform finishes creating the cluster.
I have this and I am assuming I could write terraform kubernetes code but I don't believe it is overwriting the cli's kubeconfig referenced file.
provider "kubernetes" {
load_config_file = false
host = azurerm_kubernetes_cluster.cluster_1.kube_config.0.host
username = azurerm_kubernetes_cluster.cluster_1.kube_config.0.username
password = azurerm_kubernetes_cluster.cluster_1.kube_config.0.password
client_certificate = base64decode(azurerm_kubernetes_cluster.cluster_1.kube_config.0.client_certificate)
client_key = base64decode(azurerm_kubernetes_cluster.cluster_1.kube_config.0.client_key)
cluster_ca_certificate = base64decode(azurerm_kubernetes_cluster.cluster_1.kube_config.0.cluster_ca_certificate)
}
If I understand correctly, you want to add a context inside your kube config file after creating a cluster. Maybe running az aks get-credentials using Terraform after creation will work?
resource "null_resource" "add_context" {
provisioner "local-exec" {
command = "az aks get-credentials --resource-group ${azurerm_kubernetes_cluster.cluster_1.resource_group_name} --name ${azurerm_kubernetes_cluster.cluster_1.name} --overwrite-existing"
}
depends_on = [azurerm_kubernetes_cluster.cluster_1]
}
I'm trying to figure out a way to make one instance of a module depend on the successful deployment of another instance of the same module. Unfortunately, although resources support it, modules don't seem to support the explicit depends_on switch:
➜ db_terraform git:(master) ✗ terraform plan
Error: module "slave": "depends_on" is not a valid argument
I have these in the root module: main.tf
module "master" {
source = "./modules/database"
cluster_role = "master"
..
server_count = 1
}
module "slave" {
source = "./modules/database"
cluster_role = "slave"
..
server_count = 3
}
resource "aws_route53_record" "db_master" {
zone_id = "<PRIVZONE>"
name = "master.example.com"
records = ["${module.master.instance_private_ip}"]
type = "A"
ttl = "300"
}
I want master to be deployed first. What I'm trying to do is launch two AWS instances with a database product installed. Once the master comes up, its IP will be used to create a DNS record. Once this is done, the slaves get created and will use the IP to "enlist" with the master as part of the cluster. How do I prevent the slaves from coming up concurrently with the master? I'm trying to avoid slaves failing to connect with master since the DB record may not have been created by the time the slave is ready.
I've read recommendations for using a null_resource in this context, but it's not clear to me how it should be used to help my problem.
Fwiw, here's the content of main.tf in the module.
resource "aws_instance" "database" {
ami = "${data.aws_ami.amazonlinux_legacy.id}"
instance_type = "t2.xlarge"
user_data = "${data.template_file.db_init.rendered}"
count = "${var.server_count}"
}
Thanks in advance for any answers.
I have a scenario where I need to change several parameters of a hadoop cluster managed by Ambari to document performance of a particular application. The change in the configs entails a restart of the affected components.
I am using the Ambari REST API for achieving this. I figured out how to do this for all service components of hadoop. I' am not sure whether the API provides a way to restart the MySQL server that Hive uses.
I have the following questions:-
Is it the case that a mere stop and start of mysqld on the appropriate machine is enough to ensure that the required configuration changes are recognized by Ambari and the application?
I chose the 'New MySQL database' option while installing Hive via Ambari. Does this mean that restarts are reflected in Ambari only when it is carried out from the Ambari UI?
Your inputs would be highly appreciated.
Thanks!
Found a solution to the problem. I used the following commands using the Ambari REST API for changing configurations and restarting services from the backend.
Login to the host on which the ambari server is running and use the already provided config.sh script as described below.
Modifying configuration files
#!/bin/bash
CLUSTER_NAME=$1
CONFIG_FILE=$2
PROPERTY_NAME=$3
PROPERTY_VALUE=$4
/var/lib/ambari-server/resources/scripts/configs.sh -port <ambari-server-port> set localhost $1 $2 "$3" "$4"
where CONFIG_FILE can take values like tez-site, mapred-site, hadoop-site, hive-site etc. PROPERTY_NAME and PROPERTY_VALUE should be set to values relevant to the specified CONFIG_FILE.
Restarting host components
curl -uadmin:admin -H 'X-Requested-By: ambari' -X POST -d '
{
"RequestInfo":{
"command":"RESTART",
"context":"Restart MySQL server used by Hive Metastore on node3.cluster.com and HDFS client on node1.cluster.com",
"operation_level":{
"level":"HOST",
"cluster_name":"c1"
}
},
"Requests/resource_filters":[
{
"service_name":"HIVE",
"component_name":"MYSQL_SERVER",
"hosts":"node3.cluster.com"
},
{
"service_name":"HDFS",
"component_name":"HDFS_CLIENT",
"hosts":"node1.cluster.com"
}
]
}' http://localhost:<ambari-server-port>/api/v1/clusters/c1/requests
Reference Links:
Restarting components
modifying configurations
Hope this helps!
How can I trace MySQL queries on my Linux server as they happen?
For example I'd love to set up some sort of listener, then request a web page and view all of the queries the engine executed, or just view all of the queries being run on a production server. How can I do this?
You can log every query to a log file really easily:
mysql> SHOW VARIABLES LIKE "general_log%";
+------------------+----------------------------+
| Variable_name | Value |
+------------------+----------------------------+
| general_log | OFF |
| general_log_file | /var/run/mysqld/mysqld.log |
+------------------+----------------------------+
mysql> SET GLOBAL general_log = 'ON';
Do your queries (on any db). Grep or otherwise examine /var/run/mysqld/mysqld.log
Then don't forget to
mysql> SET GLOBAL general_log = 'OFF';
or the performance will plummet and your disk will fill!
You can run the MySQL command SHOW FULL PROCESSLIST; to see what queries are being processed at any given time, but that probably won't achieve what you're hoping for.
The best method to get a history without having to modify every application using the server is probably through triggers. You could set up triggers so that every query run results in the query being inserted into some sort of history table, and then create a separate page to access this information.
Do be aware that this will probably considerably slow down everything on the server though, with adding an extra INSERT on top of every single query.
Edit: another alternative is the General Query Log, but having it written to a flat file would remove a lot of possibilities for flexibility of displaying, especially in real-time. If you just want a simple, easy-to-implement way to see what's going on though, enabling the GQL and then using running tail -f on the logfile would do the trick.
Even though an answer has already been accepted, I would like to present what might even be the simplest option:
$ mysqladmin -u bob -p -i 1 processlist
This will print the current queries on your screen every second.
-u The mysql user you want to execute the command as
-p Prompt for your password (so you don't have to save it in a file or have the command appear in your command history)
i The interval in seconds.
Use the --verbose flag to show the full process list, displaying the entire query for each process. (Thanks, nmat)
There is a possible downside: fast queries might not show up if they run between the interval that you set up. IE: My interval is set at one second and if there is a query that takes .02 seconds to run and is ran between intervals, you won't see it.
Use this option preferably when you quickly want to check on running queries without having to set up a listener or anything else.
Run this convenient SQL query to see running MySQL queries. It can be run from any environment you like, whenever you like, without any code changes or overheads. It may require some MySQL permissions configuration, but for me it just runs without any special setup.
SELECT * FROM INFORMATION_SCHEMA.PROCESSLIST WHERE COMMAND != 'Sleep';
The only catch is that you often miss queries which execute very quickly, so it is most useful for longer-running queries or when the MySQL server has queries which are backing up - in my experience this is exactly the time when I want to view "live" queries.
You can also add conditions to make it more specific just any SQL query.
e.g. Shows all queries running for 5 seconds or more:
SELECT * FROM INFORMATION_SCHEMA.PROCESSLIST WHERE COMMAND != 'Sleep' AND TIME >= 5;
e.g. Show all running UPDATEs:
SELECT * FROM INFORMATION_SCHEMA.PROCESSLIST WHERE COMMAND != 'Sleep' AND INFO LIKE '%UPDATE %';
For full details see: http://dev.mysql.com/doc/refman/5.1/en/processlist-table.html
strace
The quickest way to see live MySQL/MariaDB queries is to use debugger. On Linux you can use strace, for example:
sudo strace -e trace=read,write -s 2000 -fp $(pgrep -nf mysql) 2>&1
Since there are lot of escaped characters, you may format strace's output by piping (just add | between these two one-liners) above into the following command:
grep --line-buffered -o '".\+[^"]"' | grep --line-buffered -o '[^"]*[^"]' | while read -r line; do printf "%b" $line; done | tr "\r\n" "\275\276" | tr -d "[:cntrl:]" | tr "\275\276" "\r\n"
So you should see fairly clean SQL queries with no-time, without touching configuration files.
Obviously this won't replace the standard way of enabling logs, which is described below (which involves reloading the SQL server).
dtrace
Use MySQL probes to view the live MySQL queries without touching the server. Example script:
#!/usr/sbin/dtrace -q
pid$target::*mysql_parse*:entry /* This probe is fired when the execution enters mysql_parse */
{
printf("Query: %s\n", copyinstr(arg1));
}
Save above script to a file (like watch.d), and run:
pfexec dtrace -s watch.d -p $(pgrep -x mysqld)
Learn more: Getting started with DTracing MySQL
Gibbs MySQL Spyglass
See this answer.
Logs
Here are the steps useful for development proposes.
Add these lines into your ~/.my.cnf or global my.cnf:
[mysqld]
general_log=1
general_log_file=/tmp/mysqld.log
Paths: /var/log/mysqld.log or /usr/local/var/log/mysqld.log may also work depending on your file permissions.
then restart your MySQL/MariaDB by (prefix with sudo if necessary):
killall -HUP mysqld
Then check your logs:
tail -f /tmp/mysqld.log
After finish, change general_log to 0 (so you can use it in future), then remove the file and restart SQL server again: killall -HUP mysqld.
I'm in a particular situation where I do not have permissions to turn logging on, and wouldn't have permissions to see the logs if they were turned on. I could not add a trigger, but I did have permissions to call show processlist. So, I gave it a best effort and came up with this:
Create a bash script called "showsqlprocesslist":
#!/bin/bash
while [ 1 -le 1 ]
do
mysql --port=**** --protocol=tcp --password=**** --user=**** --host=**** -e "show processlist\G" | grep Info | grep -v processlist | grep -v "Info: NULL";
done
Execute the script:
./showsqlprocesslist > showsqlprocesslist.out &
Tail the output:
tail -f showsqlprocesslist.out
Bingo bango. Even though it's not throttled, it only took up 2-4% CPU on the boxes I ran it on. I hope maybe this helps someone.
From a command line you could run:
watch --interval=[your-interval-in-seconds] "mysqladmin -u root -p[your-root-pw] processlist | grep [your-db-name]"
Replace the values [x] with your values.
Or even better:
mysqladmin -u root -p -i 1 processlist;
This is the easiest setup on a Linux Ubuntu machine I have come across. Crazy to see all the queries live.
Find and open your MySQL configuration file, usually /etc/mysql/my.cnf on Ubuntu. Look for the section that says “Logging and Replication”
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
# Be aware that this log type is a performance killer.
log = /var/log/mysql/mysql.log
Just uncomment the “log” variable to turn on logging. Restart MySQL with this command:
sudo /etc/init.d/mysql restart
Now we’re ready to start monitoring the queries as they come in. Open up a new terminal and run this command to scroll the log file, adjusting the path if necessary.
tail -f /var/log/mysql/mysql.log
Now run your application. You’ll see the database queries start flying by in your terminal window. (make sure you have scrolling and history enabled on the terminal)
FROM http://www.howtogeek.com/howto/database/monitor-all-sql-queries-in-mysql/
Check out mtop.
I've been looking to do the same, and have cobbled together a solution from various posts, plus created a small console app to output the live query text as it's written to the log file. This was important in my case as I'm using Entity Framework with MySQL and I need to be able to inspect the generated SQL.
Steps to create the log file (some duplication of other posts, all here for simplicity):
Edit the file located at:
C:\Program Files (x86)\MySQL\MySQL Server 5.5\my.ini
Add "log=development.log" to the bottom of the file. (Note saving this file required me to run my text editor as an admin).
Use MySql workbench to open a command line, enter the password.
Run the following to turn on general logging which will record all queries ran:
SET GLOBAL general_log = 'ON';
To turn off:
SET GLOBAL general_log = 'OFF';
This will cause running queries to be written to a text file at the following location.
C:\ProgramData\MySQL\MySQL Server 5.5\data\development.log
Create / Run a console app that will output the log information in real time:
Source available to download here
Source:
using System;
using System.Configuration;
using System.IO;
using System.Threading;
namespace LiveLogs.ConsoleApp
{
class Program
{
static void Main(string[] args)
{
// Console sizing can cause exceptions if you are using a
// small monitor. Change as required.
Console.SetWindowSize(152, 58);
Console.BufferHeight = 1500;
string filePath = ConfigurationManager.AppSettings["MonitoredTextFilePath"];
Console.Title = string.Format("Live Logs {0}", filePath);
var fileStream = new FileStream(filePath, FileMode.Open, FileAccess.ReadWrite, FileShare.ReadWrite);
// Move to the end of the stream so we do not read in existing
// log text, only watch for new text.
fileStream.Position = fileStream.Length;
StreamReader streamReader;
// Commented lines are for duplicating the log output as it's written to
// allow verification via a diff that the contents are the same and all
// is being output.
// var fsWrite = new FileStream(#"C:\DuplicateFile.txt", FileMode.Create);
// var sw = new StreamWriter(fsWrite);
int rowNum = 0;
while (true)
{
streamReader = new StreamReader(fileStream);
string line;
string rowStr;
while (streamReader.Peek() != -1)
{
rowNum++;
line = streamReader.ReadLine();
rowStr = rowNum.ToString();
string output = String.Format("{0} {1}:\t{2}", rowStr.PadLeft(6, '0'), DateTime.Now.ToLongTimeString(), line);
Console.WriteLine(output);
// sw.WriteLine(output);
}
// sw.Flush();
Thread.Sleep(500);
}
}
}
}
In addition to previous answers describing how to enable general logging, I had to modify one additional variable in my vanilla MySql 5.6 installation before any SQL was written to the log:
SET GLOBAL log_output = 'FILE';
The default setting was 'NONE'.
Gibbs MySQL Spyglass
AgilData launched recently the Gibbs MySQL Scalability Advisor (a free self-service tool) which allows users to capture a live stream of queries to be uploaded to Gibbs. Spyglass (which is Open Source) will watch interactions between your MySQL Servers and client applications. No reconfiguration or restart of the MySQL database server is needed (either client or app).
GitHub: AgilData/gibbs-mysql-spyglass
Learn more: Packet Capturing MySQL with Rust
Install command:
curl -s https://raw.githubusercontent.com/AgilData/gibbs-mysql-spyglass/master/install.sh | bash
If you want to have monitoring and statistics, than there is a good and open-source tool Percona Monitoring and Management
But it is a server based system, and it is not very trivial for launch.
It has also live demo system for test.