[Load_Row table [9928]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
The AcquireConnection method call to the connection manager "DB_NAME" failed with error code 0xC0202009.
There may be error messages posted before this with more information on why the AcquireConnection method call failed.
[SSIS.Pipeline] Error: component "Load_Row table" (9928) failed validation and returned error code 0xC020801C.
[Connection manager "Raven_MSSQL"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user '****'."
I am getting above error for 10-12 packages in my pre-prod environment .
But Couple of week before, It was fine and loaded the data.
I have checked the config files and could see no changes happened and everything looks same.But when I downloaded the same package from server and executed, i got the same error.After google, I changed the protection level and executed, it got succeeded.
Do I want to change the protection level and re-deploy ?
Please put your suggestion which helps me to overcome this issue.
Thanks in advance
Related
I have setup a SSIS package to copy over some data from one table to another. At first I tried doing from one server to another server, did not succeed. Then I tried it doing within the same server, no luck again. I followed couple tutorials/videos how to do it and followed the exact pattern.
However here's what I tried to do:
Create a "Data Flow Task"
Under "Data Flow" tab create an "OLE DB Source" and "OLE DB Destination"
Configure the "OLE DB connection manager" and setup the column mapping, verify connection status for both source and destination
When I run the package I get following errors
Here are the 5 errors that are in the above figure,
[OLE DB Destination 2] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "STLEDGSQL01.MES_DEV" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
[SSIS.Pipeline] Error: OLE DB Destination failed validation and returned error code 0xC020801C.
[SSIS.Pipeline] Error: One or more component failed validation.
Error: There were errors during task validation.
[Connection manager "STLEDGSQL01.MES_DEV"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Client unable to establish connection".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Registry information is corrupt or missing. Make sure the provider is installed and registered correctly.".
Now I have tried applying couple of solution that I found in stackoverflow and out in the internet, such as following but nothing helped me so far.
Set delay validation property at package level to True from false
Change ProtectionLevel to EncryptSensitiveWithUserKey
Any help is greatly appreciated!
For anyone who's interested or had the same issue as mine, I just found the answer. I was using the wrong TargetServerVersion in project properties. My SQL server is 2016 and it was defaulted to 2019 automatically in this property page. I did change it back to 2016 and yes it all starts working.
I suggest that you do not use SSIS to move data around inside a database. Just use a stored prcedure or script. Here is a sample script that will copy data from one table to another, but only for data that doesn't exist in the target.
insert into targettable (PrimaryKeyColumn,Column1,Column2,Column3)
select PrimaryKeyColumn,Column1,Column2,Column3
from sourcetable SRC
where not exists (
select *
from targettable TGT
where TGT.PrimaryKeyColumn = SRC.PrimaryKeyColumn
)
I have a problem...
I have an OLE DB error that occurred in INSERT statement than conflicted with the FOREIGN KEY constraint.
SSIS package eturn this 3 errors:
[OLE_DEST PollOptionUserResult [43]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "The INSERT statement conflicted with the FOREIGN KEY constraint "FK_PollOptionUserResult_PollUserResult". The conflict occurred in database "dw_ismsES", table "ten.PollUserResult", column 'PollUserResultID'.".
[OLE_DEST PollOptionUserResult [43]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "OLE_DEST PollOptionUserResult.Inputs[OLE DB Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "OLE_DEST PollOptionUserResult.Inputs[OLE DB Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE_DEST PollOptionUserResult" (43) failed with error code 0xC0209029 while processing input "OLE DB Destination Input" (56). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
When I try redirect error to my error_table, it internally for some reason take the last one and no the first one I need.
How I can obligate it to take the first one error?
In my case (SSIS 2008), I created an OnError event in the package level, so every error happening in the package would be logged, regardless of where they happened. When I take this approach, all 3 errors should be logged in my error table. I.e.
Please try this approach and see what you get.
I have edited my entire question, first my question was how to execute the SSIS Package, but now I have got the solution to execute it via SQL Server Agent job but when I am trying to execute the SQL Server Agent job, I am getting error , when I viewed in history then following message is shown
Job failed. Job was evoked by the user. Last step to run was step 1.
please note the table where I am inserting the data into database via SSIS package in SQL Express, is it SQL Express creating problem.
---------Updated Error Message-------------
The following error message is seen when I expand log file of SQL Server Agent job,
Executed as user: NT Service\SQLAgent$SQL_Server_Evalu. Microsoft(R) SQL Server Execute Package utility Version 11.0.2100.60 for 64 bit copyright (C) Microsoft Corporation. All right reserved started: 16:11:39 Package Execution on IS Server failed. Execution ID:4, Execution Status:4.
Below is the screen shot how I execute the SQL Server Agent job,
------------Updated error message------------
Below is the screen shot of the error message that are given while execution of the deployed package.
Errors are as follows:
1) Data Flow Task Error: There were errors during task validation.
2) Data Flow Task Error: OLE DB Destination failed validation and return error code 0XC020801C.
3) Data Flow Task Error: One more component failed.
4) Data Flow Task Error: SSIS Error Code
DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER
The AcquireConnection method call to the connection manager "RESHMAJADHAV\SQLEXPRESS.Adventureworks2012" failed with error code 0XC0202009.
5) Package Error: SSIS Error Code DTS_E_OLEDBERROR. An OLEDB error has occured. Error Code: 0X80004005. An OLE DB record is available. source: "Microsoft SQL Server Native Client 11.0" Hresult: 0X80004005 Description:"Login failed for user 'NTSERVICE\SQLAgGENT$SQL_SERVER_EVALU'.". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0X80004005 Description:"Cannot open Database" AdventureWorks2012"
requested by login. The login failed"
Is it because of the connection string
"Data Source=RESHMAJADHAV\SQLEXPRESS;Initial Catalog=AdventureWorks2012;Provider=SQLNCLI11.1;Integrated Security=SSPI;Auto Translate=False;"
That I have defined in environmental variables in Integration Service Catalog I am unable to open the database..?
Any help will be greatly apprecaiated...
Data Source=RESHMAJADHAV\SQLEXPRESS;User ID=XXXXXXX;Password=XXXXXXXXX;Initial Catalog=AdventureWorks2012;Provider=SQLOLEDB;
for the destination connection. I think job is not getting the end user name and password.
It might help. I f not can you please post the exact error message. I am no able to see anything form the picture..
Thanks
Message
Executed as user: UKDBT91DB05V\SYSTEM. Microsoft (R) SQL Server
Execute Package Utility Version 10.50.2500.0 for 64-bit Copyright
(C) Microsoft Corporation 2010. All rights reserved. Started:
14:58:34 Error: 2013-04-01 14:58:34.45 Code: 0xC0016016
Source: Description: Failed to decrypt protected XML node
"DTS:Property" with error 0x8009000B "Key not valid for use in
specified state.". You may not be authorized to access this
information. This error occurs when there is a cryptographic error.
Verify that the correct key is available. End Error Error:
2013-04-01 14:58:34.76 Code: 0xC001000E Source:
ReceiveDGDinformation Description: The connection "stock" is not
found. This error is thrown by Connections collection when the
specific connection element is not found. End Error Error:
2013-04-01 14:58:34.80 Code: 0xC0202009 Source:
ReceiveDGDinformation Connection manager "Stock" Description: SSIS
Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error
code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft
SQL Server Native Client 10.0" Hresult: 0x80040E4D Description:
"Login failed for user 'DOTCOM\UKDBT91DB05V$'.". End Error Error:
2013-04-01 14:58:34.80 Code: 0xC020801C Source: Populate
Staginng Table Populate DGD Staging table [34] Description: SSIS
Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The
AcquireConnection method call to the connection manager "Stock" failed
with error code 0xC0202009. There may be error messages posted before
this with more information on why the AcquireConnection method call
failed. End Error Error: 2013-04-01 14:58:34.80 Code: 0xC0047017
Source: Populate Staginng Table SSIS.Pipeline Description:
component "Populate DGD Staging table" (34) failed validation and
returned error code 0xC020801C. End Error Error: 2013-04-01
14:58:34.80 Code: 0xC004700C Source: Populate Staginng Table
SSIS.Pipeline Description: One or more component failed
validation. End Error Error: 2013-04-01 14:58:34.80 Code:
0xC0024107 Source: Populate Staginng Table Description: There
were errors during task validation. End Error DTExec: The package
execution returned DTSER_FAILURE (1). Started: 14:58:34 Finished:
14:58:34 Elapsed: 0.624 seconds. The package execution failed. The
step failed.
Meaningful bits of the error message
Failed to decrypt protected XML node "DTS:Property" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error
Login failed for user 'DOTCOM\UKDBT91DB05V$'
This is probably a problem with your ProtectionLevel setting and how you are configuring the job.
If ProtectionLevel is at the default "EncryptSensitiveWithUserKey" setting, then the development environment is encrypting things like your connection string database password using a key that depends on the user who is doing the development. After you deploy it to the production server and schedule a SQL Server Agent job, it will most likely run under a different user account, and then it will be unable to decrypt the database password. You will get this error.
One possibility would be to make sure the development user and the job execution user are the same user account, but this is not a good idea. Usually you want your production user accounts to be separate from your development user accounts.
Instead, you should set ProtectionLevel to "DontSaveSensitive". Then the password won't get saved with the SSIS package at all. You create a configuration file for the connection string, but the password won't get saved to the configuration file either. You will have to edit the configuration file manually if you want it to include a password. But the best way to do this is to configure the password when you schedule the job that executes the SSIS package. That keeps the password in a safe place, and it isn't floating around all over the place with the SSIS package.
Some useful links here and here.
Good luck!
I have an SSIS package that runs without issue in debug mode, but when I try to edit the Excel Source to add more columns it is suddenly throwing the Unspecified Error
Error at MMR_MonthlyFiles_Import [Connection manager "Excel"]: SSIS Error Code
DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine"
Hresult: 0x80004005 Description: "Unspecified error".
Error at Add to Temp Table [Excel Source [1]]: SSIS Error Code
DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection
method call to the connection manager "Excel" failed with error code 0xC0202009
There may be error messages posted before this with more information on why the
AcquireConnection method call failed.
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
The path to the excel file opens without issue (I'm using a variable that holds the path and have pasted it into an explorer window and it opened the file). I have tried editing the Excel source on two other machines (other developers) and they had no issues and did not get the above error.
I was thinking of having the drivers re-installed, but if I click the debug/run button in BIDS it runs without issue so I don't think that will help. I have also tried rebooting several times and the issue still is not resolved.
Does anyone have any suggestions?
Thanks
I have been getting these issues too, you might want to check the following:
ProtectionLevel of the Package (e.g. DontSaveSensitive)
Connection string of the Data Source (e.g. Username and passwords)
Package Configurations - if you have one and if they are messed
up..
Hope this helps..