I am sure for most of you is that maybe basic. But I did not found anything in Internet, and do not understand how to handle it.
I have no problem's to deal with JSON if I have something like
{"ReplyData":
[
{
"Lane": [],
"Id": 10000,
"Title": "atitle",
...
I am just asking in my code like: parse.ReplyData[0].Lane[0]
or parse.ReplyData[0].Id etc. and that works with out problems.
But now I have the follow situation (it is like an array in array):
{"ReplyData":
[
[
{
"Lane": []
...
it works with Postman and I receive my results there!
But I am not sure how to handle it within my googlescript with parse.ReplyData[].
If I try: params.ReplyData[0].Lane I get "undefined".
If I try params.ReplyData[0][0].Lane I get TypeError: Cannot read property "Lane" from undefined.
tried even params.ReplyData[0,0].Lane
Any Ideas? Thank you in advance
Related
i'm currently trying to set up some JMeter testplans. I am pretty new to this (started a week ago) and don't have much programming experience either, so i hope you could help me in this case.
I already set up some http requests and have some simple JSON Extractor post processors to save some of the variables and use them with the "${variable}" notation.
But now i need to save and modify an object from a response to use that in the next http request.
My respose is a extremely big JSON object and the part im interested in looks something like this:
{
"payload": {
"workspace": {
"resultInstance": [
[{"part": "1"...}],
[{"part": "2"...}],
...
[{"part": "20"...}]
]
}
}
}
Note that for whatever reason these objects {"part":"1"...} are inside a nested array. And they are also pretty big.
I would like to safe those objects in a variable to use them in my next http request which should looks like this:
{
"instanceChange": {
"functionChecks": [
{"part": "1"...},
{"part": "2"...},
...
{"part": "20"...}
]
}
}
So what im really trying to find is a way to save all of the possible objects inside the nested array "resultInstance" and put them inside the non nested array "functionChecks".
I already looked inside the JMeter documentation but because of my poor programming background i cant find a way to realize this.
I think i need something like the JSR223 PostProcessor and "simply go through the resultInstance-array and use smth. like an getObject() on these", but i cant figure out the code i need and if its even possible to safe objects in variables in Jmeter.
Im pretty thankful for every bit of help or advice :).
Thanks in advance,
aiksn
Add JSR223 PostProcessor as a child of the request which returns the JSON response
Put the following code into "Script" area:
def response = new groovy.json.JsonSlurper().parse(prev.getResponseData())
def request = ['instanceChange': ['functionChecks': response.payload.workspace.resultInstance]]
vars.put('request', new groovy.json.JsonBuilder(request).toPrettyString())
That's it, you should be able to refer the generated request body as ${request} where required
More information:
Apache Groovy - Parsing and producing JSON
Apache Groovy - Why and How You Should Use It
let response ={
"payload": {
"workspace": {
"resultInstance": [
[{"part": "1"...}],
[{"part": "2"...}],
...
[{"part": "20"...}]
]
}
}
};
let requestObj={
"instanceChange": {
"functionChecks": [
]
}
};
response.payload.workspace.resultInstance.forEach(myFunction);
myFunction(item, index) {
requestObj.instance.functionsCheck.push(item[0]);
}
so I have a problem. My JSON data is getting sent over as a full string but its an object. How do i send an object instead of a string through my request. My reqparser is setup like this
search_parse = reqparse.RequestParser()
search_parse.add_argument('indexId', required=True, action='append')
search_parse.add_argument("pagination", required=False)
search_parse.add_argument("FilterCriteria", required=True)
and the JSON request I sent looks like this
{
"indexId": [
"testing"
],
"pagination": {
"Skip": 1,
"Take": 4
},
"FilterCriteria": {
"HasPatents": false,
"IsAuthor": false
}
}
and my payload is built up like this in my controller
sovren_payload = {
"PaginationSettings": pagination,
"IndexIdsToSearchInto": indexId,
"FilterCriteria": test
}
The problem I'm having is that the FilterCriteria is getting sent in the json as a string so this is how its supposed to look in JSON format
'FilterCriteria': {'coolguy': True, 'notcool': False}
But what I actually get is this
'FilterCriteria': "{'coolguy': True, 'notcool': False}"
How do I get rid of these annoying "" brackets in my json request. I print my sovren_payload and there it shows me the 'FileCriteria': "{random data}"
I also realise i have the same problem with the "pagination" variable. But if I fix it for FileCriteria I fix it for pagination as well.
Any insight would be greatly appreciated
Yeah okay, after 3 hours of struggling I found it out, should've put type=dict
I feel so stupid. My main language is C# and I only use python for AI stuff so its still new to me. Hope this helps some poor soul like me in the future :D
I'm trying to batch upload photos and I keep getting a response back from Postman saying "Batch parameter must be a JSON Array" Does anyone see what is wrong with this because it looks like valid json to me. I've been rattling with this for a few hours making minor tweaks trying to get it to upload to no avail. I also have tried encoding the url.
https://graph.facebook.com/v2.11?batch=[{"method":"POST", "relative_url":"https://graph.facebook.com/v2.11/{pageid}/photos?access_token={access-token}", "body":"link_url":"https://{link-to-image}/wmphotos/999995/6d5cc4169bbf4e7dbe31f3739e025412/a572c29dff_640.jpg"}]&access_token={access-token}
Looking at your code, it seems that the JSON object in your batch array is actually malformed. body:link_url:link should be body: {link_url:link}
Bad:
[
{
"method":"POST",
"relative_url":"foo",
"body":"link_url":"link"
}
]
Good:
[
{
"method":"POST",
"relative_url":"foo",
"body":{"link_url":"link"}
}
]
I am getting JSON returned in this format:
{
"status": "success",
"data": {
"debtor": {
"debtor_id": 1301,
"key": value,
"key": value,
"key": value
}
}
}
Somehow, my RESTAdapter needs to provide my debtor model properties from "debtor" section of the JSON.
Currently, I am getting a successful call back from the server, but a console error saying that Ember cannot find a model for "status". I can't find in the Ember Model Guide how to deal with JSON that is nested like this?
So far, I have been able to do a few simple things like extending the RESTSerializer to accept "debtor_id" as the primaryKey, and also remove the pluralization of the GET URL request... but I can't find any clear guide to reach a deeply nested JSON property.
Extending the problem detail for clarity:
I need to somehow alter the default behavior of the Adapter/Serializer, because this JSON convention is being used for many purposes other than my Ember app.
My solution thus far:
With a friend we were able to dissect the "extract API" (thanks #lame_coder for pointing me to it)
we came up with a way to extend the serializer on a case-by-case basis, but not sure if it really an "Ember Approved" solution...
// app/serializers/debtor.js
export default DS.RESTSerializer.extend({
primaryKey: "debtor_id",
extract: function(store, type, payload, id, requestType) {
payload.data.debtor.id = payload.data.debtor.debtor_id;
return payload.data.debtor;
}
});
It seems that even though I was able to change my primaryKey for requesting data, Ember was still trying to use a hard coded ID to identify the correct record (rather than the debtor_id that I had set). So we just overwrote the extract method to force Ember to look for the correct primary key that I wanted.
Again, this works for me currently, but I have yet to see if this change will cause any problems moving forward....
I would still be looking for a different solution that might be more stable/reusable/future-proof/etc, if anyone has any insights?
From description of the problem it looks like that your model definition and JSON structure is not matching. You need to make it exactly same in order to get it mapped correctly by Serializer.
If you decide to change your REST API return statement would be something like, (I am using mock data)
//your Get method on service
public object Get()
{
return new {debtor= new { debtor_id=1301,key1=value1,key2=value2}};
}
The json that ember is expecting needs to look like this:
"debtor": {
"id": 1301,
"key": value,
"key": value,
"key": value
}
It sees the status as a model that it needs to load data for. The next problem is it needs to have "id" in there and not "debtor_id".
If you need to return several objects you would do this:
"debtors": [{
"id": 1301,
"key": value,
"key": value,
"key": value
},{
"id": 1302,
"key": value,
"key": value,
"key": value
}]
Make sense?
Consider The following is the json response i'm getting from the solr if i use multivalued = true for the fields.
{
"id":["1","2","3"],
"TS":["2010-06-28 00:00:00.0","2010-06-28 00:00:00.0","2010-06-28 00:00:00.0"],
"Type":["VIDEO","IMAGE","VIDEO"]
}
but i need the response like this
{
"0":["1","2010-06-28 00:00:00.0","VIDEO"],
"1":["2","2010-06-28 00:00:00.0","IMAGE"],
"2":["3","2010-06-28 00:00:00.0","VIDEO"]
}
How can i get this.Any help would be appreciated. Thanks in advance.
**Update :**
Actually at the first level its not a problem. When we are going
more than one level then only the
problem arises. right now i'm putting
the entire response here to make it
clear.
{
"responseHeader":{
"status":0,
"QTime":0,
"params":{
"facet":"true",
"indent":"on",
"start":"0",
"q":"laptop",
"wt":["json",
"json"],
"rows":"200"}},
"response":{"numFound":1,"start":0,"docs":[
{
"createdBy":"0",
"id":194,
"status":"ACTIVE",
"text":"Can i buy Sony laptop?",
"ansTS":["2010-07-01 00:00:00.0","2010-08-06 15:11:55.0","2010-08-11 15:28:13.0","2010-08-11 15:30:49.0","2010-08-12 01:45:48.0","2010-08-12 01:46:18.0"],
"mediaType":["VIDEO","VIDEO","VIDEO"],
"ansId":["59","76","77","78","80","81"],
"mediaId":[24,25,26],
]},
]
},
"facet_counts":{
"facet_queries":{},
"facet_fields":{
"catName":[]},
"facet_dates":{}}}
look at the mediaId , mediatype ,ansTS arrays. Its one to many relationship.But they are grouped by column names.Thanks in advance.
You mentioned that you will consume this JSON from a browser. So you can use jQuery or any other javascript library to convert the raw Solr JSON response into the structure that you need.
If the first snippet is the actual solr response you're getting, then chances are you have a bug in your feeder (connector/crawler/etc). It looks like you only have one indexed document (that matches your query), which has all the values that you expect from 3 documents.
Assuming you have 3 documents, analogous with your expected output, then the actual solr wt=json result would contain:
[{
"id":"1",
"TS":"2010-06-28 00:00:00.0",
"Type":"VIDEO"
},
{
"id":"2",
"TS":"2010-06-28 00:00:00.0",
"Type":"IMAGE"
},
{
"id":"3",
"TS":"2010-06-28 00:00:00.0",
"Type":"VIDEO"
}]
If this assumption is correct, then I would suggest looking over your indexing logic.
This output is produced by Solr's JSONResponseWriter. Its output can't be altered via configuration. But what you can do is create your own version of JSONResponseWriter to produce your desired output. You can registered your new ResponseWriter by adding a queryResponseWriter tag in solrconfig.xml.