First I would like to say I am new in this.
I am trying to install Kamailio on Ubuntu Linux Mint and I have this problem.
It says i dont have that directory.. how can i create it ?
i was following this steps.
https://www.kamailio.org/wiki/install/4.4.x/git
In file included from km_val.c:30:0:
km_val.h:32:19: fatal error: mysql.h: Adresár alebo súbor neexistuje
compilation terminated.
../../Makefile.rules:97: recipe for target 'km_val.o' failed
make1: * [km_val.o] Error 1
Makefile:511: recipe for target 'modules' failed
make: * [modules] Error 1
You have to install libmysqlclient-dev package:
apt install libmysqlclient-dev
On latest Debian-based operating systems that ship either with MySQL or MariaDB, you may have to install default-libmysqlclient-dev:
apt install default-libmysqlclient-dev
It is also recommended to install pkg-config package in order to discover the extra dependencies brought in by the specific mysql client library.
Related
Hello I try to install ruby gem json but it gives following error
`Building native extensions. This could take a while...
ERROR: Error installing json:
ERROR: Failed to build gem native extension.
mkmf.rb can't find header files for ruby at /usr/share/include/ruby.h
Gem files will remain installed in /home/jenkins/.gem/ruby/gems/json-2.0.2 for inspection.
Results logged to /home/jenkins/.gem/ruby/gems/json-2.0.2/ext/json/ext/generator/gem_make.out`
I looked up similar post and was directed to install ruby-devel. But thats also given me a hard time.
yum install ruby-devel
Loaded plugins: addreleaserel, priorities, product-id, search-disabled-repos, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Resolving Dependencies
--> Running transaction check
---> Package ruby-devel.x86_64 0:2.0.0.598-25.el7_1 will be installed
--> Processing Dependency: ruby(x86-64) = 2.0.0.598-25.el7_1 for package: ruby-devel-2.0.0.598-25.el7_1.x86_64
--> Finished Dependency Resolution
Error: Package: ruby-devel-2.0.0.598-25.el7_1.x86_64 (RHN-rhel-x86_64-server-optional-7-1-locked)
Requires: ruby(x86-64) = 2.0.0.598-25.el7_1
Installed: ruby-2.0.0.648-29.el7.x86_64 (#RHN-rhel-x86_64-server-7-latest)
ruby(x86-64) = 2.0.0.648-29.el7
Available: ruby-2.0.0.353-20.el7.x86_64 (RHN-rhel-x86_64-server-7)
ruby(x86-64) = 2.0.0.353-20.el7
Available: ruby-2.0.0.353-22.el7_0.x86_64 (RHN-rhel-x86_64-server-7)
ruby(x86-64) = 2.0.0.353-22.el7_0
Available: ruby-2.0.0.598-24.el7.x86_64 (RHN-rhel-x86_64-server-7)
ruby(x86-64) = 2.0.0.598-24.el7
Available: ruby-2.0.0.598-25.el7_1.x86_64 (RHN-rhel-x86_64-server-7-1-locked)
ruby(x86-64) = 2.0.0.598-25.el7_1
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
Can anyone suggest me steps to install ruby-devel using yum?please
Something seems off about your configured repositories.
From your error message, YUM is attempting to install ruby-devel.x86_64 0:2.0.0.598-25.el7_1 from the "RHN-rhel-x86_64-server-optional-7-1-locked" channel, but you currently have ruby-2.0.0.648-29.el7.x86_64 installed from the "#RHN-rhel-x86_64-server-7-latest" channel which will not satisfy the dependency as the release versions do not match.
For YUM to complete the transaction you posted, it would have to install an older version of the RedHat ruby package and I don't think it wants to do that without being explicitly told.
There are a couple options I can think of, depending on how you want to resolve this. My first suggestion is what I would do if I were managing this server, which is to straighten out the repository configuration and discover why yum install ruby-devel is attempting to install an older package (it might have something to do with that locked channel).
The other option is to install that ruby-devel package by any means necessary which may not be good for your RedHat subscription or could break things. You would first replace the installed version of ruby with the older one that matches ruby-devel, then attempt to install ruby-devel:
yum downgrade ruby-2.0.0.598-25
yum install ruby-devel-2.0.0.598-25
I do not have a RedHat machine with a subscription so I would not be able to test if this second suggestion would even work, use at your own risk. I would also recommend again you attempt the first suggestion of fixing your repositories or figure out why one of the channels is locked as that method would be safer and you could get support from RedHat if needed.
Hope that helps
I'm on a 64-bit Amazon Linux machine.
I had previously installed mysql-server 5.5. (using sudo yum install)
However, I soon found out that my application requires MySql-serve 5.6.
So I uninstalled mysql-server 5.5. (using sudo yum remove mysql-server) and now I'm following these instruction to install mysql-server 5.6.
But I'm running into a problem.
when I try to do the second install, I get the following 2 errors:
file /usr/lib64/mysql/libmysqlclient.so.18 from install of mysql-community-libs-5.6.14-3.el6.x86_64 conflicts with file from package mysql55-libs-5.5.46-1.10.amzn1.x86_64
file /etc/my.cnf from install of mysql-community-server-5.6.14-3.el6.x86_64 conflicts with file from package mysql-config-5.5.46-1.10.amzn1.x86_64
Why on earth am I getting these two errors? How do I fix them?
I removed mysql-server-5.5, so why is it conflicting with 5.6?
I did ls on /etc/my.cnf and /usr/lib64/mysql/libmysqlclient.so.18 and the files don't even exist!! If the files don't exist how can they be conflicting with other files?? Who can help explain this?
PS, I tried #msknapp's explanation here: Can't install MySQL 5.6 by RPM, however I don't know what to do after step #1 to install the rpm. I think that step is left unstated.
mysql-server (of whatever version) depends on other packages ( in your case mysql-community-libs mysql-community-server)
When it is installed in the first place with the old version this stuff is installed. When you "uninstall" mysql-server these dependencies are NOT removed.
When you try and install the new version these still existing packages will conflict with the new package. It does not matter if the actual files in the package are there, it is the package and it's listing of what to expect that conflicts.
To resolve your problem figure out what the dependencies of mysql-server were and uninstall them before attemping the install.
This answer https://superuser.com/questions/294662/how-to-get-list-of-dependencies-of-non-installed-rpm-package may be of interest for working out what mysql-server depends on
I am facing an issue between the Zenoss core installation and MySQL rpms.
The Zenoss core installation won't complete, complaining about mysql-client and mysql-shared versions, even though I have newer versions installed. As suggested in this Quest/answer ,
I also tried to install a 5.5.41 client package but it did not change anything. Here's the situation:
[root#bstfe1032 Zenoss]# yum -y --nogpgcheck localinstall zenoss-4.2.0.el6.x86_64.rpm
[...]
--> Finished Dependency Resolution
Error: Package: zenoss-4.2.0-1586.el6.x86_64 (/zenoss-4.2.0.el6.x86_64)
Requires: mysql-client >= 5.5.13
Error: Package: zenoss-4.2.0-1586.el6.x86_64 (/zenoss-4.2.0.el6.x86_64)
Requires: mysql-shared >= 5.5.13
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
[root#bstfe1032 Zenoss]# rpm -qa|grep -i mysql
MySQL-client-5.6.22-1.el6.x86_64
MySQL-server-5.6.22-1.el6.x86_64
MySQL-shared-5.6.22-1.el6.x86_64
The Zenoss core install doc points to MySQL packages from mysql.org and this is where I got them.
Any idea of what I should try next ? I am using CentOS 6, this is a testbed and not a production machine because I wanted to give Zenoss core a test drive.
You are mixing "old" packages (zenoss-4.2.0) with too new one (MySQL 5.6) and it's not probably handled correctly in Zenoss core packages.
The best option for you is to use autodeploy script - https://github.com/zenoss/core-autodeploy/blob/4.2.5/core-autodeploy.sh
It will download last Zenoss packages from http://sourceforge.net/projects/zenoss/files/zenoss-4.2/zenoss-4.2.5/
and MySQL packages from ftp://mirror.anl.gov/pub/mysql/Downloads/MySQL-5.5/
See http://wiki.zenoss.org/Install_Zenoss for more information.
I need to update my system and I just did a sudo yum update, and got the following errors.
--> Finished Dependency Resolution
Error: Package: gstreamer1-plugins-ugly-1.4.3-1.fc21.x86_64 (rpmfusion-free-rawhide)
Requires: libcdio.so.15(CDIO_15)(64bit)
Error: Package: gstreamer1-plugins-ugly-1.4.3-1.fc21.x86_64 (rpmfusion-free-rawhide)
Requires: libcdio.so.15()(64bit)
Error: Package: gstreamer-plugins-ugly-0.10.19-18.fc21.x86_64 (rpmfusion-free-rawhide)
Requires: libcdio.so.15(CDIO_15)(64bit)
Error: Package: librtmp-2.4-3.20131205.gitdc76f0a.fc21.x86_64 (rpmfusion-free-rawhide)
Requires: libgcrypt.so.20()(64bit)
Error: Package: gstreamer-plugins-ugly-0.10.19-18.fc21.x86_64 (rpmfusion-free-rawhide)
Requires: libcdio.so.15()(64bit)
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
I tried installing libcdio with, sudo yum install libcdio because of the dependency error as seen above, but it appears to be already installed.
Loaded plugins: fastestmirror, langpacks, refresh-packagekit
Loading mirror speeds from cached hostfile
* fedora: ftp.nluug.nl
* rpmfusion-free-rawhide: ftp.nluug.nl
* rpmfusion-nonfree-rawhide: ftp.nluug.nl
* updates: ftp.nluug.nl
Package libcdio-0.90-3.fc20.x86_64 already installed and latest version
Nothing to do
Please also note that I have tried these two commands.
yum clean all and
yum clean metadata
Edit
when I try and install rpmfusion for fedora 20, it wouldn't let me, since it already has a the fedora 21 repo already installed.
sudo rpm -ivh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-20.noarch.rpm
Preparing... ################################# [100%]
package rpmfusion-free-release-21-0.1.noarch (which is newer than rpmfusion-free-release-20-1.noarch) is already installed
file /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-latest from install of rpmfusion-free-release-20-1.noarch conflicts with file from package rpmfusion-free-release-21-0.1.noarch
file /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-rawhide from install of rpmfusion-free-release-20-1.noarch conflicts with file from package rpmfusion-free-release-21-0.1.noarch
file /etc/yum.repos.d/rpmfusion-free-rawhide.repo from install of rpmfusion-free-release-20-1.noarch conflicts with file from package rpmfusion-free-release-21-0.1.noarch
file /etc/yum.repos.d/rpmfusion-free-updates.repo from install of rpmfusion-free-release-20-1.noarch conflicts with file from package rpmfusion-free-release-21-0.1.noarch
file /etc/yum.repos.d/rpmfusion-free.repo from install of rpmfusion-free-release-20-1.noarch conflicts with file from package rpmfusion-free-release-21-0.1.noarch
The rpmfusion-free-rawhide is targeting fc21. Your system is fc20. As such the rpmfusion-free-rawhide RPMs are depending on versions of system packages newer than what your default repositories (and your installed system) have available.
You can either upgrade your system to fc21 or find an rpmfusion repository that targets fc20.
I am trying to install RMySQL package in R, by install.packages("RMySQL"), but it complains that it couldn't find the include libraries.
Configuration error:
could not find the MySQL installation include and/or library
directories. Manually specify the location of the MySQL
libraries and the header files and re-run R CMD INSTALL.
So, then I installed mysql in Ubuntu as follows:
sudo apt-get install mysql-client
This installation worked fine, but still I get the same error in R. Can someone point me to the right direction please?
I've checked this
http://packages.ubuntu.com/search?keywords=r-cran-rmysql
so you should have r-cran-rmysql package inside your Ubuntu packages list. Therefore
from inside R remove DBI, RMySQL packages,
then sudo apt-get install r-cran-rmysql
HTH