Import single table from .sql file into database? [duplicate] - mysql

I have a mysqldump backup of my mysql database consisting of all of our tables which is about 440 megs. I want to restore the contents of just one of the tables from the mysqldump. Is this possible? Theoretically, I could just cut out the section that rebuilds the table I want but I don't even know how to effectively edit a text document that size.

You can try to use sed in order to extract only the table you want.
Let say the name of your table is mytable and the file mysql.dump is the file containing your huge dump:
$ sed -n -e '/CREATE TABLE.*`mytable`/,/Table structure for table/p' mysql.dump > mytable.dump
This will copy in the file mytable.dump what is located between CREATE TABLE mytable and the next CREATE TABLE corresponding to the next table.
You can then adjust the file mytable.dump which contains the structure of the table mytable, and the data (a list of INSERT).

I used a modified version of uloBasEI's sed command. It includes the preceding DROP command, and reads until mysql is done dumping data to your table (UNLOCK). Worked for me (re)importing wp_users to a bunch of Wordpress sites.
sed -n -e '/DROP TABLE.*`mytable`/,/UNLOCK TABLES/p' mydump.sql > tabledump.sql

This can be done more easily? This is how I did it:
Create a temporary database (e.g. restore):
mysqladmin -u root -p create restore
Restore the full dump in the temp database:
mysql -u root -p --one-database restore < fulldump.sql
Dump the table you want to recover:
mysqldump restore mytable > mytable.sql
Import the table in another database:
mysql -u root -p database < mytable.sql

A simple solution would be to simply create a dump of just the table you wish to restore separately. You can use the mysqldump command to do so with the following syntax:
mysqldump -u [user] -p[password] [database] [table] > [output_file_name].sql
Then import it as normal, and it will only import the dumped table.

One way or another, any process doing that will have to go through the entire text of the dump and parse it in some way. I'd just grep for
INSERT INTO `the_table_i_want`
and pipe the output into mysql. Take a look at the first table in the dump before, to make sure you're getting the INSERT's the right way.
Edit: OK, got the formatting right this time.

Backup
$ mysqldump -A | gzip > mysqldump-A.gz
Restore single table
$ mysql -e "truncate TABLE_NAME" DB_NAME
$ zgrep ^"INSERT INTO \`TABLE_NAME" mysqldump-A.gz | mysql DB_NAME

You should try #bryn command but with the ` delimiter otherwise you will also extract the tables having a prefix or a suffix, this is what I usually do:
sed -n -e '/DROP TABLE.*`mytable`/,/UNLOCK TABLES/p' dump.sql > mytable.sql
Also for testing purpose, you may want to change the table name before importing:
sed -n -e 's/`mytable`/`mytable_restored`/g' mytable.sql > mytable_restored.sql
To import you can then use the mysql command:
mysql -u root -p'password' mydatabase < mytable_restore.sql

One possible way to deal with this is to restore to a temporary database, and dump just that table from the temporary database. Then use the new script.

sed -n -e '/-- Table structure for table `my_table_name`/,/UNLOCK TABLES/p' database_file.sql > table_file.sql
This is a better solution than some of the others above because not all SQL dumps contain a DROP TABLE statement. This one will work will all kinds of dumps.

This tool may be is what you want: tbdba-restore-mysqldump.pl
https://github.com/orczhou/dba-tool/blob/master/tbdba-restore-mysqldump.pl
e.g. Restore a table from database dump file:
tbdba-restore-mysqldump.pl -t yourtable -s yourdb -f backup.sql

Table should present with same structure in both dump and database.
`zgrep -a ^"INSERT INTO \`table_name" DbDump-backup.sql.tar.gz | mysql -u<user> -p<password> database_name`
or
`zgrep -a ^"INSERT INTO \`table_name" DbDump-backup.sql | mysql -u<user> -p<password> database_name`

This may help too.
# mysqldump -u root -p database0 > /tmp/database0.sql
# mysql -u root -p -e 'create database database0_bkp'
# mysql -u root -p database0_bkp < /tmp/database0.sql
# mysql -u root -p database0 -e 'insert into database0.table_you_want select * from database0_bkp.table_you_want'

Most modern text editors should be able to handle a text file that size, if your system is up to it.
Anyway, I had to do that once very quickly and i didnt have time to find any tools. I set up a new MySQL instance, imported the whole backup and then spit out just the table I wanted.
Then I imported that table into the main database.
It was tedious but rather easy. Good luck.

You can use vi editor. Type:
vi -o mysql.dump mytable.dump
to open both whole dump mysql.dump and a new file mytable.dump.
Find the appropriate insert into line by pressing / and then type a phrase, for example: "insert into `mytable`", then copy that line using yy. Switch to next file by ctrl+w then down arrow key, paste the copied line with pp. Finally save the new file by typing :wq and quite vi editor by :q.
Note that if you have dumped the data using multiple inserts you can copy (yank) all of them at once using Nyy in which N is the number of lines to be copied.
I have done it with a file of 920 MB size.

I tried a few options, which were incredibly slow. This split a 360GB dump into its tables in a few minutes:
How do I split the output from mysqldump into smaller files?

The 'sed' solutions mentioned earlier are nice but as mentioned not 100% secure
You may have INSERT commands with data containing:
... CREATE TABLE...(whatever)...mytable...
or even the exact string "CREATE TABLE `mytable`;"
if you are storing DML commands for instance!
(and if the table is huge you don't want to check that manually)
I would verify the exact syntax of the dump version used, and have a more restrictive pattern search:
Avoid ".*" and use "^" to ensure we start at the begining of the line.
And I'd prefer to grab the initial 'DROP'
All in all, this works better for me:
sed -n -e '/^DROP TABLE IF EXISTS \`mytable\`;/,/^UNLOCK TABLES;/p' mysql.dump > mytable.dump

Get a decent text editor like Notepad++ or Vim (if you're already proficient with it). Search for the table name and you should be able to highlight just the CREATE, ALTER, and INSERT commands for that table. It may be easier to navigate with your keyboard rather than a mouse. And I would make sure you're on a machine with plenty or RAM so that it will not have a problem loading the entire file at once. Once you've highlighted and copied the rows you need, it would be a good idea to back up just the copied part into it's own backup file and then import it into MySQL.

The chunks of SQL are blocked off with "Table structure for table my_table" and "Dumping data for table my_table."
You can use a Windows command line as follows to get the line numbers for the various sections. Adjust the searched string as needed.
find /n "for table `" sql.txt
The following will be returned:
---------- SQL.TXT
[4384]-- Table structure for table my_table
[4500]-- Dumping data for table my_table
[4514]-- Table structure for table some_other_table
... etc.
That gets you the line numbers you need... now, if I only knew how to use them... investigating.

You can import single table using terminal line as given below.
Here import single user table into specific database.
mysql -u root -p -D my_database_name < var/www/html/myproject/tbl_user.sql

I admire some of the ingenuity here, but there is literally no reason to use sed at all to address the OP's question.
The comment "use --one-database" is the correct answer, built into MySQL/MariaDB. No need for third-party hacks.
mysql -u root -p databasename --one-database < localhost.sql will just import the desired database.
I also found in some cases, when using this to import a series of databases, it would create the next database in the list for me (but not put anything in it). Not sure why it did that, but it made the restore easier.
With this command, enter the password interactively and it will import the requested database.

Related

Importing a MySQL Database on Localhost

So I wanted to format my system and I had a lot of works that I have done on my localhost that involves databases. I followed the normal way of backing up the database by exporting it into an SQL file but I think I made a mess by making a mistake of backing up everything in one SQL file (I mean the whole localhost was exported to just one SQL file).
The problem now is: when I try to import the backed up file I mean the (localhost.sql), I get an error like
tables already exist.
information_schema
performance_schema
an every other tables that comes with Xampp, which has been preventing me from importing the database.
These tables are the phpmyadmin tables that came with Xampp. I have been trying to get past this for days.
My question now is that can I extract different databases from the same compiled SQL database file?
To import a database you can do following things:
mysql -u username -p database_name < /path/to/database.sql
From within mysql:
mysql> use database_name;
mysql> source database.sql;
The error is quite self-explanatory. The tables information_schema and performance_schema are already in the MySQL server instance that you are trying to import to.
Both of these databases are default in MySQL, so it is strange that you would be trying to import these into another MySQL installation. The basic syntax to create a .sql file to import from the command line is:
$ mysqldump -u [username] -p [database name] > sqlfile.sql
Or for multiple databases:
$ mysqldump --databases db1 db2 db3 > sqlfile.sql
Then to import them into another MySQL installation:
$ mysql -u [username] -p [database name] < sqlfile.sql
If the database already exists in MySQL then you need to do:
$ mysqlimport -u [username] -p [database name] sqlfile.sql
This seems to be the command you want to use, however I have never replaced the information_schema or performance_schema databases, so I'm unsure if this will cripple your MySQL installation or not.
So an example would be:
$ mysqldump -uDonglecow -p myDatabase > myDatabase.sql
$ mysql -uDonglecow -p myDatabase < myDatabase.sql
Remember not to provide a password on the command line, as this will be visible in plain text in the command history.
The point the previous responders seem to be missing is that the dump file localhost.sql when fed into mysql using
% mysql -u [username] -p [databasename] < localhost.sql
generates multiple databases so specifying a single databasename on the command line is illogical.
I had this problem and my solution was to not specify [databasename] on the command line and instead run:
% mysql -u [username] -p < localhost.sql
which works.
Actually it doesn't work right away because of previous attempts
which did create some structure inside mysql, and those bits in localhost.sql
make mysql complain because they already exist from the first time around, so
now they can't be created on the second time around.
The solution to THAT is to manually edit localhost.sql with modifications like
INSERT IGNORE for INSERT (so it doesn't re-insert the same stuff, nor complain),
CREATE DATABASE IF NOT EXISTS for CREATE DATABASE,
CREATE TABLE IF NOT EXISTS for CREATE TABLE,
and to delete ALTER TABLE commands entirely if they generate errors because by then
they've already been executed ((and INSERTs and CREATEs perhaps too for the same reasons). You can check the tables with DESCRIBE TABLE and SELECT commands to make sure that the ALTERations, etc. have taken hold, for confidence.
My own localhost.sql file was 300M which my favorite editor emacs complained about, so I had to pull out bits using
% head -n 20000 localhost.sql | tail -n 10000 > 2nd_10k_lines.sql
and go through it 10k lines at a time. It wasn't too hard because drupal was responsible for an enormous amount, the vast majority, of junk in there, and I didn't want to keep any of that, so I could carve away enormous chunks easily.
unzip -p /pathoffile/database_file.zip | mysql -uusername -p databsename;
Best way to import database in localhost has simple 5 steps:
zip sql file first to compress databse size.
go to termianl.
create empty database.
Run Command unzip databse With Import database: unzip -p /pathoffile/database_file.zip | mysql -uusername -p databsename;
Enter Password

How to ignore certain MySQL tables when importing a database?

I have a large SQL file with one database and about 150 tables. I would like to use mysqlimport to import that database, however, I would like the import process to ignore or skip over a couple of tables. What is the proper syntax to import all tables, but ignore some of them? Thank you.
The accepted answer by RandomSeed could take a long time! Importing the table (just to drop it later) could be very wasteful depending on size.
For a file created using
mysqldump -u user -ppasswd --opt --routines DBname > DBdump.sql
I currently get a file about 7GB, 6GB of which is data for a log table that I don't 'need' to be there; reloading this file takes a couple of hours. If I need to reload (for development purposes, or if ever required for a live recovery) I skim the file thus:
sed '/INSERT INTO `TABLE_TO_SKIP`/d' DBdump.sql > reduced.sql
And reload with:
mysql -u user -ppasswd DBname < reduced.sql
This gives me a complete database, with the "unwanted" table created but empty. If you really don't want the tables at all, simply drop the empty tables after the load finishes.
For multiple tables you could do something like this:
sed '/INSERT INTO `TABLE1_TO_SKIP`/d' DBdump.sql | \
sed '/INSERT INTO `TABLE2_TO_SKIP`/d' | \
sed '/INSERT INTO `TABLE3_TO_SKIP`/d' > reduced.sql
There IS a 'gotcha' - watch out for procedures in your dump that might contain "INSERT INTO TABLE_TO_SKIP".
mysqlimport is not the right tool for importing SQL statements. This tool is meant to import formatted text files such as CSV. What you want to do is feed your sql dump directly to the mysql client with a command like this one:
bash > mysql -D your_database < your_sql_dump.sql
Neither mysql nor mysqlimport provide the feature you need. Your best chance would be importing the whole dump, then dropping the tables you do not want.
If you have access to the server where the dump comes from, then you could create a new dump with mysqldump --ignore-table=database.table_you_dont_want1 --ignore-table=database.table_you_dont_want2 ....
Check out this answer for a workaround to skip importing some table
For anyone working with .sql.gz files; I found the following solution to be very useful. Our database was 25GB+ and I had to remove the log tables.
gzip -cd "./mydb.sql.gz" | sed -r '/INSERT INTO `(log_table_1|log_table_2|log_table_3|log_table_4)`/d' | gzip > "./mydb2.sql.gz"
Thanks to the answer of Don and comment of Xosofox and this related post:
Use zcat and sed or awk to edit compressed .gz text file
Little old, but figure it might still come in handy...
I liked #Don's answer (https://stackoverflow.com/a/26379517/1446005) but found it very annoying that you'd have to write to another file first...
In my particular case this would take too much time and disc space
So I wrote a little bash script:
#!/bin/bash
tables=(table1_to_skip table2_to_skip ... tableN_to_skip)
tableString=$(printf "|%s" "${tables[#]}")
trimmed=${tableString:1}
grepExp="INSERT INTO \`($trimmed)\`"
zcat $1 | grep -vE "$grepExp" | mysql -uroot -p
this does not generate a new sql script but pipes it directly to the database
also, it does create the tables, just doesn't import the data (which was the problem I had with huge log tables)
Unless you have ignored the tables during the dump with mysqldump --ignore-table=database.unwanted_table, you have to use some script or tool to filter out the data you don't want to import from the dump file before passing it to mysql client.
Here is a bash/sh function that would exclude the unwanted tables from a SQL dump on the fly (through pipe):
# Accepts one argument, the list of tables to exclude (case-insensitive).
# Eg. filt_exclude '%session% action_log %_cache'
filt_exclude() {
local excl_tns;
if [ -n "$1" ]; then
# trim & replace /[,;\s]+/ with '|' & replace '%' with '[^`]*'
excl_tns=$(echo "$1" | sed -r 's/^[[:space:]]*//g; s/[[:space:]]*$//g; s/[[:space:]]+/|/g; s/[,;]+/|/g; s/%/[^\`]\*/g');
grep -viE "(^INSERT INTO \`($excl_tns)\`)|(^DROP TABLE (IF EXISTS )?\`($excl_tns)\`)|^LOCK TABLES \`($excl_tns)\` WRITE" | \
sed 's/^CREATE TABLE `/CREATE TABLE IF NOT EXISTS `/g'
else
cat
fi
}
Suppose you have a dump created like so:
MYSQL_PWD="my-pass" mysqldump -u user --hex-blob db_name | \
pigz -9 > dump.sql.gz
And want to exclude some unwanted tables before importing:
pigz -dckq dump.sql.gz | \
filt_exclude '%session% action_log %_cache' | \
MYSQL_PWD="my-pass" mysql -u user db_name
Or you could pipe into a file or any other tool before importing to DB.
If desired, you can do this one table at a time:
mysqldump -p sourceDatabase tableName > tableName.sql
mysql -p -D targetDatabase < tableName.sql
Here is my script to exclude some tables from mysql dump
I use it to restore DB when need to keep orders and payments data
exclude_tables_from_dump.sh
#!/bin/bash
if [ ! -f "$1" ];
then
echo "Usage: $0 mysql_dump.sql"
exit
fi
declare -a TABLES=(
user
order
order_product
order_status
payments
)
CMD="cat $1"
for TBL in "${TABLES[#]}";do
CMD+="|sed 's/DROP TABLE IF EXISTS \`${TBL}\`/# DROP TABLE IF EXIST \`${TBL}\`/g'"
CMD+="|sed 's/CREATE TABLE \`${TBL}\`/CREATE TABLE IF NOT EXISTS \`${TBL}\`/g'"
CMD+="|sed -r '/INSERT INTO \`${TBL}\`/d'"
CMD+="|sed '/DELIMITER\ \;\;/,/DELIMITER\ \;/d'"
done
eval $CMD
It avoid DROP and reCREATE of tables and inserting data to this tables.
Also it strip all FUNCTIONS and PROCEDURES that stored between DELIMITER ;; and DELIMITER ;
I would not use it on production but if I would have to import some backup quickly that contains many smaller table and one big monster table that might take hours to import I would most probably "grep -v unwanted_table_name original.sql > reduced.sql
and then mysql -f < reduced.sql

mysqlimport using dump

I need to restore a dumped database, but without discarding existing rows in tables.
To dump I use:
mysqldump -u root --password --databases mydatabase > C:\mydatabase.sql
To restore I do not use the mysql command, since it will discard all existing rows, but instead mysqlimport should do the trick, obviously. But how? Running:
mysqlimport -u root -p mydatabase c:\mydatabase.sql
says "table mydatabase.mydatabase does not exist". Why does it look for tables? How to restore dump with entire database without discarding existing rows in existing tables? I could dump single tables if mysqlimport wants it.
What to do?
If you are concerned with stomping over existing rows, you need to mysqldump it as follows:
MYSQLDUMP_OPTIONS="--no-create-info --skip-extended-insert"
mysqldump -uroot --ppassword ${MYSQLDUMP_OPTIONS} --databases mydatabase > C:\mydatabase.sql
This will do the following:
remove CREATE TABLE statements and use only INSERTs.
It will INSERT exactly one row at a time. This helps mitigate rows with duplicate keys
With the mysqldump performed in this manner, now you can import like this
mysql -uroot -p --force -Dtargetdb < c:\mydatabase.sql
Give it a Try !!!
WARNING : Dumping with --skip-extended-insert will make the mysqldump really big, but at least you can control each duplicate done one by one. This will also increase the length of time the reload of the mysqldump is done.
I would edit the mydatabase.sql file in a text editor, dropping the lines that reference dropping tables or deleting rows, then manually import the file normally using the mysql command as normal.
mysql -u username -p databasename < mydatabase.sql
The mysqlimport command is designed for dumps created with the mysql command SELECT INTO OUTFILE rather than direct database dumps.
This sounds like it is much more complicated than you are describing.
If you do a backup the way you describe, it has all the records in your database. Then you say that you do not want to delete existing rows from your database and load from the backup? Why? The reason why the backup file (the output from mysqldump) has the drop and create table commands is to ensure that you don't wind up with two copies of your data.
The right answer is to load the mysqldump output file using the mysql client. If you don't want to do that, you'll have to explain why to get a better answer.

Mysql restore to restore structure and no data from a given backup (schema.sql)

Hi I use mysql administrator and have restored backup files (backup.sql). I would like to use restore the structure without data and it is not giving me an option to do so. I understand phpadmin provides this. I can not use this however. Any one can tell me an easy way?
Dump database structure only:
cat backup.sql | grep -v ^INSERT | mysql -u $USER -p
This will execute everything in the backup.sql file except the INSERT lines that would have populated the tables. After running this you should have your full table structure along with any stored procedures / views / etc. that were in the original databse, but your tables will all be empty.
You can change the ENGINE to BLACKHOLE in the dump using sed
cat backup.sql | sed 's/ENGINE=(MYISAM|INNODB)/ENGINE=BLACKHOLE/g' > backup2.sql
This engine will just "swallow" the INSERT statements and the tables will remain empty. Of course you must change the ENGINE again using:
ALTER TABLE `mytable` ENGINE=MYISAM;
IIRC the backup.sql files (if created by mysqldump) are just SQL commands in a text file. Just copy-paste all the "create ..." statements from the beginning of the file, but not the "insert" statements in to another file and "mysql < newfile" you should have the empty database without any data in it.
there is no way to tell the mysql client to skip the INSERT commands. the least-hassle way to do this is run the script as-is and let it load the data, then just TRUNCATE all of the tables.
you can write a script to do the following:
1 : import the dump into a new database.
2 : truncate all the tables with a loop.
3 : export the db again.
4 : now u just have the structure
You can backup you MYSQL database structure with
mysqldump -u username –p -d database_name > backup.sql
(You should not supply password at command line as it leads to security risks.MYSQL will ask for password by default.)

Can I restore a single table from a full mysql mysqldump file?

I have a mysqldump backup of my mysql database consisting of all of our tables which is about 440 megs. I want to restore the contents of just one of the tables from the mysqldump. Is this possible? Theoretically, I could just cut out the section that rebuilds the table I want but I don't even know how to effectively edit a text document that size.
You can try to use sed in order to extract only the table you want.
Let say the name of your table is mytable and the file mysql.dump is the file containing your huge dump:
$ sed -n -e '/CREATE TABLE.*`mytable`/,/Table structure for table/p' mysql.dump > mytable.dump
This will copy in the file mytable.dump what is located between CREATE TABLE mytable and the next CREATE TABLE corresponding to the next table.
You can then adjust the file mytable.dump which contains the structure of the table mytable, and the data (a list of INSERT).
I used a modified version of uloBasEI's sed command. It includes the preceding DROP command, and reads until mysql is done dumping data to your table (UNLOCK). Worked for me (re)importing wp_users to a bunch of Wordpress sites.
sed -n -e '/DROP TABLE.*`mytable`/,/UNLOCK TABLES/p' mydump.sql > tabledump.sql
This can be done more easily? This is how I did it:
Create a temporary database (e.g. restore):
mysqladmin -u root -p create restore
Restore the full dump in the temp database:
mysql -u root -p --one-database restore < fulldump.sql
Dump the table you want to recover:
mysqldump restore mytable > mytable.sql
Import the table in another database:
mysql -u root -p database < mytable.sql
A simple solution would be to simply create a dump of just the table you wish to restore separately. You can use the mysqldump command to do so with the following syntax:
mysqldump -u [user] -p[password] [database] [table] > [output_file_name].sql
Then import it as normal, and it will only import the dumped table.
One way or another, any process doing that will have to go through the entire text of the dump and parse it in some way. I'd just grep for
INSERT INTO `the_table_i_want`
and pipe the output into mysql. Take a look at the first table in the dump before, to make sure you're getting the INSERT's the right way.
Edit: OK, got the formatting right this time.
Backup
$ mysqldump -A | gzip > mysqldump-A.gz
Restore single table
$ mysql -e "truncate TABLE_NAME" DB_NAME
$ zgrep ^"INSERT INTO \`TABLE_NAME" mysqldump-A.gz | mysql DB_NAME
You should try #bryn command but with the ` delimiter otherwise you will also extract the tables having a prefix or a suffix, this is what I usually do:
sed -n -e '/DROP TABLE.*`mytable`/,/UNLOCK TABLES/p' dump.sql > mytable.sql
Also for testing purpose, you may want to change the table name before importing:
sed -n -e 's/`mytable`/`mytable_restored`/g' mytable.sql > mytable_restored.sql
To import you can then use the mysql command:
mysql -u root -p'password' mydatabase < mytable_restore.sql
One possible way to deal with this is to restore to a temporary database, and dump just that table from the temporary database. Then use the new script.
sed -n -e '/-- Table structure for table `my_table_name`/,/UNLOCK TABLES/p' database_file.sql > table_file.sql
This is a better solution than some of the others above because not all SQL dumps contain a DROP TABLE statement. This one will work will all kinds of dumps.
This tool may be is what you want: tbdba-restore-mysqldump.pl
https://github.com/orczhou/dba-tool/blob/master/tbdba-restore-mysqldump.pl
e.g. Restore a table from database dump file:
tbdba-restore-mysqldump.pl -t yourtable -s yourdb -f backup.sql
Table should present with same structure in both dump and database.
`zgrep -a ^"INSERT INTO \`table_name" DbDump-backup.sql.tar.gz | mysql -u<user> -p<password> database_name`
or
`zgrep -a ^"INSERT INTO \`table_name" DbDump-backup.sql | mysql -u<user> -p<password> database_name`
This may help too.
# mysqldump -u root -p database0 > /tmp/database0.sql
# mysql -u root -p -e 'create database database0_bkp'
# mysql -u root -p database0_bkp < /tmp/database0.sql
# mysql -u root -p database0 -e 'insert into database0.table_you_want select * from database0_bkp.table_you_want'
Most modern text editors should be able to handle a text file that size, if your system is up to it.
Anyway, I had to do that once very quickly and i didnt have time to find any tools. I set up a new MySQL instance, imported the whole backup and then spit out just the table I wanted.
Then I imported that table into the main database.
It was tedious but rather easy. Good luck.
You can use vi editor. Type:
vi -o mysql.dump mytable.dump
to open both whole dump mysql.dump and a new file mytable.dump.
Find the appropriate insert into line by pressing / and then type a phrase, for example: "insert into `mytable`", then copy that line using yy. Switch to next file by ctrl+w then down arrow key, paste the copied line with pp. Finally save the new file by typing :wq and quite vi editor by :q.
Note that if you have dumped the data using multiple inserts you can copy (yank) all of them at once using Nyy in which N is the number of lines to be copied.
I have done it with a file of 920 MB size.
I tried a few options, which were incredibly slow. This split a 360GB dump into its tables in a few minutes:
How do I split the output from mysqldump into smaller files?
The 'sed' solutions mentioned earlier are nice but as mentioned not 100% secure
You may have INSERT commands with data containing:
... CREATE TABLE...(whatever)...mytable...
or even the exact string "CREATE TABLE `mytable`;"
if you are storing DML commands for instance!
(and if the table is huge you don't want to check that manually)
I would verify the exact syntax of the dump version used, and have a more restrictive pattern search:
Avoid ".*" and use "^" to ensure we start at the begining of the line.
And I'd prefer to grab the initial 'DROP'
All in all, this works better for me:
sed -n -e '/^DROP TABLE IF EXISTS \`mytable\`;/,/^UNLOCK TABLES;/p' mysql.dump > mytable.dump
Get a decent text editor like Notepad++ or Vim (if you're already proficient with it). Search for the table name and you should be able to highlight just the CREATE, ALTER, and INSERT commands for that table. It may be easier to navigate with your keyboard rather than a mouse. And I would make sure you're on a machine with plenty or RAM so that it will not have a problem loading the entire file at once. Once you've highlighted and copied the rows you need, it would be a good idea to back up just the copied part into it's own backup file and then import it into MySQL.
The chunks of SQL are blocked off with "Table structure for table my_table" and "Dumping data for table my_table."
You can use a Windows command line as follows to get the line numbers for the various sections. Adjust the searched string as needed.
find /n "for table `" sql.txt
The following will be returned:
---------- SQL.TXT
[4384]-- Table structure for table my_table
[4500]-- Dumping data for table my_table
[4514]-- Table structure for table some_other_table
... etc.
That gets you the line numbers you need... now, if I only knew how to use them... investigating.
You can import single table using terminal line as given below.
Here import single user table into specific database.
mysql -u root -p -D my_database_name < var/www/html/myproject/tbl_user.sql
I admire some of the ingenuity here, but there is literally no reason to use sed at all to address the OP's question.
The comment "use --one-database" is the correct answer, built into MySQL/MariaDB. No need for third-party hacks.
mysql -u root -p databasename --one-database < localhost.sql will just import the desired database.
I also found in some cases, when using this to import a series of databases, it would create the next database in the list for me (but not put anything in it). Not sure why it did that, but it made the restore easier.
With this command, enter the password interactively and it will import the requested database.