I don't know whether it is a basic question, but I need to ask.
Here is my problem. when a wrote a simple HTML code for showing a paragraph,
but its not getting in the correct format that i wish.
I am adding code below.
<p>
Eosinophil count - absolute
An absolute eosinophil count is a blood test that measures the number of white blood cells called eosinophils.
Eosinophils become active when you have certain allergic diseases, infections, and other medical conditions.
How the Test is Performed
Most of the time blood is drawn from a vein on the inside of the elbow or the back of the hand. The site is cleaned with an antiseptic.
The health care provider wraps an elastic band around your upper arm to make the vein swell with blood.
Next, the provider gently inserts a needle into the vein. The blood collects into an airtight tube attached to the needle.
The elastic band is removed from your arm. The needle is then removed and the site is covered to stop bleeding.
Things to Know
In infants or young children, a sharp tool called a lancet may be used to prick the skin.
The blood collects in a small glass tube, or onto a slide or test strip. A bandage is put on the spot to stop bleeding.
Reference Range
The serum reference ranges of eosinophils are as follows:
Eosinophils blood (%): 0.0-6.0 (This range may vary slightly in different laboratories.)
Eosinophil blood count (absolute): 30-350. The percentage of eosinophils is multiplied by the white blood cell count to
give the absolute eosinophil count. This range may vary slightly in different laboratories.
ANTIGEN SUSPENSION SERUM DILUTION
. 1:30 1:60 1:120 1:240
--------------------------------------------------------------------------------
Salmonella Typhi "O" : -- -- -- --
Salmonella Typhi "H" : -- -- -- --
Salmonella Para Typhi "AH" : -- -- -- --
Salmonella Para Typhi "BH" : -- -- -- --
</p>
But in output all the spaces are truncated.
How to get the exact text as output?
Check white-space: pre; property in css here
p {
white-space: pre;
}
<p>
Eosinophil count - absolute
An absolute eosinophil count is a blood test that measures the number of white blood cells called eosinophils.
Eosinophils become active when you have certain allergic diseases, infections, and other medical conditions.
How the Test is Performed
Most of the time blood is drawn from a vein on the inside of the elbow or the back of the hand. The site is cleaned with an antiseptic.
The health care provider wraps an elastic band around your upper arm to make the vein swell with blood.
Next, the provider gently inserts a needle into the vein. The blood collects into an airtight tube attached to the needle.
The elastic band is removed from your arm. The needle is then removed and the site is covered to stop bleeding.
Things to Know
In infants or young children, a sharp tool called a lancet may be used to prick the skin.
The blood collects in a small glass tube, or onto a slide or test strip. A bandage is put on the spot to stop bleeding.
Reference Range
The serum reference ranges of eosinophils are as follows:
Eosinophils blood (%): 0.0-6.0 (This range may vary slightly in different laboratories.)
Eosinophil blood count (absolute): 30-350. The percentage of eosinophils is multiplied by the white blood cell count to
give the absolute eosinophil count. This range may vary slightly in different laboratories.
ANTIGEN SUSPENSION SERUM DILUTION
. 1:30 1:60 1:120 1:240
--------------------------------------------------------------------------------
Salmonella Typhi "O" : -- -- -- --
Salmonella Typhi "H" : -- -- -- --
Salmonella Para Typhi "AH" : -- -- -- --
Salmonella Para Typhi "BH" : -- -- -- --
</p>
use   for space in HTML
In HTML, multiple spaces are automatically replaced by only one space except if your text is surrounded with <pre> tag.
If you want your spaces in another type of tag (e.g. <p>) you need to use HTML entities. The HTML entity for a normal space is and for a tab character it's &tab;. There's a lot of HTML entities like those. Here is a good reference to find the HTML entities you need: HTML entities reference chart
Related
I am setting up JSON+LD tags on my product pages for Facebooks "Dynamic Ads & Commerce".
https://developers.facebook.com/docs/marketing-api/catalog/reference/
Two tags it states are required:
id
Required for dynamic ads and commerce.
availability
Required for dynamic ads and commerce.
I've added these, but it causes Google to reject my json+ld markup.
Invalid enum value in field 'availability'
1.
2.
How could I please both parties here? If I am adding json+ld markup, it may as well have all required elements to be valid on Google and Facebook (Catalog).
[
{
"#context":"http:\/\/www.schema.org",
"#type":"Product",
"name":"Silentnight Safe Nights Toddler Bedset – 4.5 Tog",
"title":"Silentnight Safe Nights Toddler Bedset – 4.5 Tog",
"url":"http:\/\/myexampledomain.co.uk\/product\/silentnight-safe-nights-toddler-bedset-4-5-tog\/",
"link":"http:\/\/myexampledomain.co.uk\/product\/silentnight-safe-nights-toddler-bedset-4-5-tog\/",
"image":"http:\/\/myexampledomain.co.uk\/app\/uploads\/sites\/3\/2019\/10\/silentnight-safe-nights-toddler-bedset-4.5-tog-pack.jpg",
"image_link":"http:\/\/myexampledomain.co.uk\/app\/uploads\/sites\/3\/2019\/10\/silentnight-safe-nights-toddler-bedset-4.5-tog-pack.jpg",
"description":"The Silentnight Toddler Duvet and Pillow set makes a great first bed set for your little one. The cot bed sized set includes a snuggly duvet and a soft pillow that is specially designed for children. The slim profile of the pillow offers your child just the right amount of support they need. It's important that small children don't overheat in bed, so the light and soft duvet comes in a 4.5 tog weight rating. Both the pillow and duvet are made from a smooth polycotton cover offering breathable comfort. The products are filled with anti-allergy hollowfibre that actively defends against the bacteria and dust mites that can cause allergies providing a cleaner, fresher and altogether a safer option for a good night's sleep. Our anti-allergy fibres are approved by the British Allergy Foundation, which means they have the ultimate seal of approval. Our fibres have been scientifically tested and are proven to reduce or remove allergens from the indoor environment.\nSuitable only for children over 12 months. Both the pillow and duvet are fully machine washable, and thanks to the easy care polycotton covers, the products have great recovery and can be washed time and time again.",
"sku":"506984LS",
"id":17214,
"productID":17214,
"offers":[
{
"#type":"Offer",
"price":"30.99",
"priceCurrency":"GBP",
"url":"http:\/\/myexampledomain.co.uk\/product\/silentnight-safe-nights-toddler-bedset-4-5-tog\/",
"gtin":"5012701506984",
"gtin8":"5012701506984",
"condition":"new",
"availability":"in stock",
"inventoryLevel":54
}
],
"brand":"Silentnight"
}
]
I want to compare two smoothing methods for a bigram model:
Add-one smoothing
Interpolated Absolute Discounting
For the first method, I found some codes.
def calculate_bigram_probabilty(self, previous_word, word):
bigram_word_probability_numerator = self.bigram_frequencies.get((previous_word, word), 0)
bigram_word_probability_denominator = self.unigram_frequencies.get(previous_word, 0)
if self.smoothing:
bigram_word_probability_numerator += 1
bigram_word_probability_denominator += self.unique__bigram_words
return 0.0 if bigram_word_probability_numerator == 0 or bigram_word_probability_denominator == 0 else float(
bigram_word_probability_numerator) / float(bigram_word_probability_denominator)
However, I found nothing for the second method except for some references for 'KneserNeyProbDist'. However, this is for trigrams!
How can I change my code above to calculate it? The parameters of this method must be estimated from a development-set.
In this answer I just clear up a few things that I just found about your problem, but I can't provide a coded solution.
with KneserNeyProbDist you seem to refer to a python implementation of that problem: https://kite.com/python/docs/nltk.probability.KneserNeyProbDist
There exists an article about Kneser–Ney smoothing on wikipedia: https://en.wikipedia.org/wiki/Kneser%E2%80%93Ney_smoothing
The article above links this tutorial: https://nlp.stanford.edu/~wcmac/papers/20050421-smoothing-tutorial.pdf but this has a small fault on the most important page 29, the clear text is this:
Modified Kneser-Ney
Chen and Goodman introduced modified Kneser-Ney:
Interpolation is used instead of backoff. Uses a separate discount for one- and two-counts instead of a single discount for all counts. Estimates discounts on held-out data instead of using a formula
based on training counts.
Experiments show all three modifications improve performance.
Modified Kneser-Ney consistently had best performance.
Regrettable the modified Version is not explained in that document.
The original documentation by Chen & Goodman luckily is available, the Modified Kneser–Ney smoothing is explained on page 370 of this document: http://u.cs.biu.ac.il/~yogo/courses/mt2013/papers/chen-goodman-99.pdf.
I copy the most important text and formula here as screenshot:
So the Modified Kneser–Ney smoothing now is known and seems being the best solution, just translating the description beside formula in running code is still one step to do.
It might be helpful that below the shown text (above in screenshot) in the original linked document is still some explanation that might help to understand the raw description.
I have to do this repeatedly, so I was wondering if there was a working around....
here is a set of amenities for an apartment, they have to be transferred to a larger list containing those amenities by clicking off multiple choice cirlces. Is there away to edit the script to do it all at once>
example
accessible
air conditioning
dishwasher
garage
hardwood floors
parking
patio / balcony
gym
in unit laundry
cats allowed
dogs allowed
pet friendly
basketball court
bathtub
bbq/grill
bike storage
business center
carpet
ceiling fan
clubhouse
game room
granite counters
microwave
oven
package receiving
playground
pool table
range
refrigerator
stainless steel
walk in closets
I think you want to just checkmark all of the checkboxes on the amenities list so something like this will work:
$('div.whitelist-searchable-amenity input[type=checkbox]').each(function(){
$(this).prop('checked', true);
});
https://jsfiddle.net/r62qgou3/
Edit:
I am not sure of what you mean by "copying text to script" but I modified the script to check if the values that you are looking for are within the document. This should search the values of the checkboxes and then you can use your own script to "copy" the value elsewhere. Just add more values to the array if you need more keywords.
x = [
"accessible",
"air conditioning",
"dishwasher",
"garage",
];
$('div.whitelist-searchable-amenity input[type=checkbox]').each(function(){
if(x.indexOf(this.value) > -1)
{
alert("copy here");
}
});
I am having this problem, where I have several cars, numbers and letters, and need to put 5 cars in the starting places. -random order is ok.
I' having trouble finding in AS3 a way so that the EndX and EndY of each object can be in the starting lines and be considered right no matter the order!
I'm having trouble putting the code here so, heres a titanpad with the code:
this is the code:
being (um, dois, tres, quatro) the movieclip instance name for each numbered car.
https://titanpad.com/42vtnCbvLu
First of all, you could probably benefit by using the distance between two points formula and seeing if the distance is less than a certain value rather than checking in all 4 directions manually:
Math.abs(Math.sqrt((x2-x1)^2 + (y2-y1)^2))
Let the position of the car be (x1,y1) and the start position (x2,y2).
This formula will give you the distance between the two points in any direction, and you could test maybe whether this value is less than your offset.
As for the cars in any order part, I'm interpreting that you have your cars and you want the user to drag them to one of 5 spots, a bit like this:
spot1
spot2
spot3
spot4
spot5
All with respective coordinates. My suggestion would be to have a boolean flag for whether each spot is occupied that stops the program checking whether a car is put there after it has been taken once.
Once all these flags are true, then you can proceed.
Hope this helps.
I was working with queries that the data is being used for the meta description.
UPDATE cards SET meta_description = 'Amy\'s bugs address labels are printed on recycled label paper. Available in quantities of 30. Each label is 2.5 x 1 inch with rounded corners.' WHERE card_id = 'al007'
I have noticed though that the period after paper is shortening the meta description to just "Amy's bugs address labels are printed on recycled label paper." If I remove the period the entire description will show up then. Does anyone know how to solve this tiny dilemma?
I'm pretty sure that the issue is in whatever place you see the results. Most likely, there's a line feed after the period and your device does not support/show multi-line data. When you remove the period, you probably remove the carriage return as well.
Try escaping the period with '\'
Since you say, by removing period, the whole sentence is getting updated, I assume there is no problem with the column size.