Build a JSON string with Bash variables - json

Question

I need to read these bash variables into my JSON string and I am not familiar with bash. any help is appreciated.
#!/bin/sh
BUCKET_NAME=testbucket
OBJECT_NAME=testworkflow-2.0.1.jar
TARGET_LOCATION=/opt/test/testworkflow-2.0.1.jar
JSON_STRING='{"bucketname":"$BUCKET_NAME"","objectname":"$OBJECT_NAME","targetlocation":"$TARGET_LOCATION"}'
echo $JSON_STRING

Answer 1

You are better off using a program like jq to generate the JSON, if you don't know ahead of time if the contents of the variables are properly escaped for inclusion in JSON. Otherwise, you will just end up with invalid JSON for your trouble.
BUCKET_NAME=testbucket
OBJECT_NAME=testworkflow-2.0.1.jar
TARGET_LOCATION=/opt/test/testworkflow-2.0.1.jar
JSON_STRING=$( jq -n \
--arg bn "$BUCKET_NAME" \
--arg on "$OBJECT_NAME" \
--arg tl "$TARGET_LOCATION" \
'{bucketname: $bn, objectname: $on, targetlocation: $tl}' )

Answer 2

You can use printf:
JSON_FMT='{"bucketname":"%s","objectname":"%s","targetlocation":"%s"}\n'
printf "$JSON_FMT" "$BUCKET_NAME" "$OBJECT_NAME" "$TARGET_LOCATION"
much clear and simpler

Answer 3

A possibility:
#!/bin/bash
BUCKET_NAME="testbucket"
OBJECT_NAME="testworkflow-2.0.1.jar"
TARGET_LOCATION="/opt/test/testworkflow-2.0.1.jar
# one line
JSON_STRING='{"bucketname":"'"$BUCKET_NAME"'","objectname":"'"$OBJECT_NAME"'","targetlocation":"'"$TARGET_LOCATION"'"}'
# multi-line
JSON_STRING="{
\"bucketname\":\"${BUCKET_NAME}\",
\"objectname\":\"${OBJECT_NAME}\",
\"targetlocation\":\"${TARGET_LOCATION}\"
}"
# [optional] validate the string is valid json
echo "${JSON_STRING}" | jq

Answer 4

In addition to chepner's answer, it's also possible to construct the object completely from args with this simple recipe:
BUCKET_NAME=testbucket
OBJECT_NAME=testworkflow-2.0.1.jar
TARGET_LOCATION=/opt/test/testworkflow-2.0.1.jar
JSON_STRING=$(jq -n \
--arg bucketname "$BUCKET_NAME" \
--arg objectname "$OBJECT_NAME" \
--arg targetlocation "$TARGET_LOCATION" \
'$ARGS.named')
Explanation:
--null-input | -n disabled reading input. From the man page: Don't read any input at all! Instead, the filter is run once using null as the input. This is useful when using jq as a simple calculator or to construct JSON data from scratch.
--arg name value passes values to the program as predefined variables: value is available as $name. All named arguments are also available as $ARGS.named
Because the format of $ARGS.named is already an object, jq can output it as is.

Answer 5

First, don't use ALL_CAPS_VARNAMES: it's too easy to accidentally overwrite a crucial shell variable (like PATH)
Mixing single and double quotes in shell strings can be a hassle. In this case, I'd use printf:
bucket_name=testbucket
object_name=testworkflow-2.0.1.jar
target_location=/opt/test/testworkflow-2.0.1.jar
template='{"bucketname":"%s","objectname":"%s","targetlocation":"%s"}'
json_string=$(printf "$template" "$BUCKET_NAME" "$OBJECT_NAME" "$TARGET_LOCATION")
echo "$json_string"
For homework, read this page carefully: Security implications of forgetting to quote a variable in bash/POSIX shells
A note on creating JSON with string concatenation: there are edge cases. For example, if any of your strings contain double quotes, you can broken JSON:
$ bucket_name='a "string with quotes"'
$ printf '{"bucket":"%s"}\n' "$bucket_name"
{"bucket":"a "string with quotes""}
Do do this more safely with bash, we need to escape that string's double quotes:
$ printf '{"bucket":"%s"}\n' "${bucket_name//\"/\\\"}"
{"bucket":"a \"string with quotes\""}

Answer 6

I had to work out all possible ways to deal json strings in a command request, Please look at the following code to see why using single quotes can fail if used incorrectly.
# Create Release and Tag commit in Github repository
# returns string with in-place substituted variables
json=$(cat <<-END
{
"tag_name": "${version}",
"target_commitish": "${branch}",
"name": "${title}",
"body": "${notes}",
"draft": ${is_draft},
"prerelease": ${is_prerelease}
}
END
)
# returns raw string without any substitutions
# single or double quoted delimiter - check HEREDOC specs
json=$(cat <<-!"END" # or 'END'
{
"tag_name": "${version}",
"target_commitish": "${branch}",
"name": "${title}",
"body": "${notes}",
"draft": ${is_draft},
"prerelease": ${is_prerelease}
}
END
)
# prints fully formatted string with substituted variables as follows:
echo "${json}"
{
"tag_name" : "My_tag",
"target_commitish":"My_branch"
....
}
Note 1: Use of single vs double quotes
# enclosing in single quotes means no variable substitution
# (treats everything as raw char literals)
echo '${json}'
${json}
echo '"${json}"'
"${json}"
# enclosing in single quotes and outer double quotes causes
# variable expansion surrounded by single quotes(treated as raw char literals).
echo "'${json}'"
'{
"tag_name" : "My_tag",
"target_commitish":"My_branch"
....
}'
Note 2: Caution with Line terminators
Note the json string is formatted with line terminators such as LF \n
or carriage return \r(if its encoded on windows it contains CRLF \r\n)
using (translate) tr utility from shell we can remove the line terminators if any
# following code serializes json and removes any line terminators
# in substituted value/object variables too
json=$(echo "$json" | tr -d '\n' | tr -d '\r' )
# string enclosed in single quotes are still raw literals
echo '${json}'
${json}
echo '"${json}"'
"${json}"
# After CRLF/LF are removed
echo "'${json}'"
'{ "tag_name" : "My_tag", "target_commitish":"My_branch" .... }'
Note 3: Formatting
while manipulating json string with variables, we can use combination of ' and " such as following, if we want to protect some raw literals using outer double quotes to have in place substirution/string interpolation:
# mixing ' and "
username=admin
password=pass
echo "$username:$password"
admin:pass
echo "$username"':'"$password"
admin:pass
echo "$username"'[${delimiter}]'"$password"
admin[${delimiter}]pass
Note 4: Using in a command
Following curl request already removes existing \n (ie serializes json)
response=$(curl -i \
--user ${username}:${api_token} \
-X POST \
-H 'Accept: application/vnd.github.v3+json' \
-d "$json" \
"https://api.github.com/repos/${username}/${repository}/releases" \
--output /dev/null \
--write-out "%{http_code}" \
--silent
)
So when using it for command variables, validate if it is properly formatted before using it :)

Answer 7

If you need to build a JSON representation where members mapped to undefined or empty variables should be ommited, then jo can help.
#!/bin/bash
BUCKET_NAME=testbucket
OBJECT_NAME=""
JO_OPTS=()
if [[ ! "${BUCKET_NAME}x" = "x" ]] ; then
JO_OPTS+=("bucketname=${BUCKET_NAME}")
fi
if [[ ! "${OBJECT_NAME}x" = "x" ]] ; then
JO_OPTS+=("objectname=${OBJECT_NAME}")
fi
if [[ ! "${TARGET_LOCATION}x" = "x" ]] ; then
JO_OPTS+=("targetlocation=${TARGET_LOCATION}")
fi
jo "${JO_OPTS[#]}"
The output of the commands above would be just (note the absence of objectname and targetlocation members):
{"bucketname":"testbucket"}

Answer 8

can be done following way:
JSON_STRING='{"bucketname":"'$BUCKET_NAME'","objectname":"'$OBJECT_NAME'","targetlocation":"'$TARGET_LOCATION'"}'

Answer 9

For Node.js Developer, or if you have node environment installed, you can try this:
JSON_STRING=$(node -e "console.log(JSON.stringify({bucketname: $BUCKET_NAME, objectname: $OBJECT_NAME, targetlocation: $TARGET_LOCATION}))")
Advantage of this method is you can easily convert very complicated JSON Object (like object contains array, or if you need int value instead of string) to JSON String without worrying about invalid json error.
Disadvantage is it's relying on Node.js environment.

Answer 10

These solutions come a little late but I think they are inherently simpler that previous suggestions (avoiding the complications of quoting and escaping).
BUCKET_NAME=testbucket
OBJECT_NAME=testworkflow-2.0.1.jar
TARGET_LOCATION=/opt/test/testworkflow-2.0.1.jar
# Initial unsuccessful solution
JSON_STRING='{"bucketname":"$BUCKET_NAME","objectname":"$OBJECT_NAME","targetlocation":"$TARGET_LOCATION"}'
echo $JSON_STRING
# If your substitution variables have NO whitespace this is sufficient
JSON_STRING=$(tr -d [:space:] <<JSON
{"bucketname":"$BUCKET_NAME","objectname":"$OBJECT_NAME","targetlocation":"$TARGET_LOCATION"}
JSON
)
echo $JSON_STRING
# If your substitution variables are more general and maybe have whitespace this works
JSON_STRING=$(jq -c . <<JSON
{"bucketname":"$BUCKET_NAME","objectname":"$OBJECT_NAME","targetlocation":"$TARGET_LOCATION"}
JSON
)
echo $JSON_STRING
#... A change in layout could also make it more maintainable
JSON_STRING=$(jq -c . <<JSON
{
"bucketname" : "$BUCKET_NAME",
"objectname" : "$OBJECT_NAME",
"targetlocation" : "$TARGET_LOCATION"
}
JSON
)
echo $JSON_STRING

Answer 11

To build upon Hao's answer using NodeJS: you can split up the lines, and use the -p option which saves having to use console.log.
JSON_STRING=$(node -pe "
JSON.stringify({
bucketname: process.env.BUCKET_NAME,
objectname: process.env.OBJECT_NAME,
targetlocation: process.env.TARGET_LOCATION
});
")
An inconvenience is that you need to export the variables beforehand, i.e.
export BUCKET_NAME=testbucket
# etc.
Note: You might be thinking, why use process.env? Why not just use single quotes and have bucketname: '$BUCKET_NAME', etc so bash inserts the variables? The reason is that using process.env is safer - if you don't have control over the contents of $TARGET_LOCATION it could inject JavaScript into your node command and do malicious things (by closing the single quote, e.g. the $TARGET_LOCATION string contents could be '}); /* Here I can run commands to delete files! */; console.log({'a': 'b. On the other hand, process.env takes care of sanitising the input.

Answer 12

You could use envsubst:
export VAR="some_value_here"
echo '{"test":"$VAR"}' | envsubst > json.json
also it might be a "template" file:
//json.template
{"var": "$VALUE", "another_var":"$ANOTHER_VALUE"}
So after you could do:
export VALUE="some_value_here"
export ANOTHER_VALUE="something_else"
cat json.template | envsubst > misha.json

Answer 13

For a general case of building JSON from bash with arbitrary inputs, many of the previous responses (even the high voted ones with jq) omit cases when the variables contain " double quote, or \n newline escape string, and you need complex string concatenation of the inputs.
When using jq you need to printf %b the input first to get the \n converted to real newlines, so that once you pass through jq you get \n back and not \\n.
I found this with version with nodejs to be quite easy to reason about if you know javascript/nodejs well:
TITLE='Title'
AUTHOR='Bob'
JSON=$( TITLE="$TITLE" AUTHOR="$AUTHOR" node -p 'JSON.stringify( {"message": `Title: ${process.env.TITLE}\n\nAuthor: ${process.env.AUTHOR}`} )' )
It's a bit verbose due to process.env. but allows to properly pass the variables from shell, and then format things inside (nodejs) backticks in a safe way.
This outputs:
printf "%s\n" "$JSON"
{"message":"Title: Title\n\nAuthor: Bob"}
(Note: when having a variable with \n always use printf "%s\n" "$VAR" and not echo "$VAR", whose output is platform-dependent! See here for details)
Similar thing with jq would be
TITLE='Title'
AUTHOR='Bob'
MESSAGE="Title: ${TITLE}\n\nAuthor: ${AUTHOR}"
MESSAGE_ESCAPED_FOR_JQ=$(printf %b "${MESSAGE}")
JSON=$( jq '{"message": $jq_msg}' --arg jq_msg "$MESSAGE_ESCAPED_FOR_JQ" --null-input --compact-output --raw-output --monochrome-output )
(the last two params are not necessary when running in a subshell, but I just added them so that the output is then same when you run the jq command in a top-level shell).

Answer 14

Bash will not insert variables into a single-quote string. In order to get the variables bash needs a double-quote string.
You need to use double-quote string for the JSON and just escape double-quote characters inside JSON string.
Example:
#!/bin/sh
BUCKET_NAME=testbucket
OBJECT_NAME=testworkflow-2.0.1.jar
TARGET_LOCATION=/opt/test/testworkflow-2.0.1.jar
JSON_STRING="{\"bucketname\":\"$BUCKET_NAME\",\"objectname\":\"$OBJECT_NAME\",\"targetlocation\":\"$TARGET_LOCATION\"}"
echo $JSON_STRING

Answer 15

if you have node.js and get minimist installed in global:
jc() {
node -p "JSON.stringify(require('minimist')(process.argv), (k,v) => k=='_'?undefined:v)" -- "$#"
}
jc --key1 foo --number 12 --boolean \
--under_score 'abc def' --'white space' ' '
# {"key1":"foo","number":12,"boolean":true,"under_score":"abc def","white space":" "}
you can post it with curl or what:
curl --data "$(jc --type message --value 'hello world!')" \
--header 'content-type: application/json' \
http://server.ip/api/endpoint
be careful that minimist will parse dot:
jc --m.room.member #gholk:ccns.io
# {"m":{"room":{"member":"#gholk:ccns.io"}}}

Answer 16

Used this for AWS Macie configuration:
JSON_CONFIG=$( jq -n \
--arg bucket_name "$BUCKET_NAME" \
--arg kms_key_arn "$KMS_KEY_ARN" \
'{"s3Destination":{"bucketName":$bucket_name,"kmsKeyArn":$kms_key_arn}}'
)
aws macie2 put-classification-export-configuration --configuration "$JSON_CONFIG"

Answer 17

You can simply make a call like this to print the JSON.
#!/bin/sh
BUCKET_NAME=testbucket
OBJECT_NAME=testworkflow-2.0.1.jar
TARGET_LOCATION=/opt/test/testworkflow-2.0.1.jar
echo '{ "bucketName": "'"$BUCKET_NAME"'", "objectName": "'"$OBJECT_NAME"'", "targetLocation": "'"$TARGET_LOCATION"'" }'
or
JSON_STRING='{ "bucketName": "'"$BUCKET_NAME"'", "objectName": "'"$OBJECT_NAME"'", "targetLocation": "'"$TARGET_LOCATION"'" }'
echo $JOSN_STRING