I have some issue while application is starting, it does not give any errors and window completely with no control. Here is screenshot.
So my question is, can I somehow turn on debug mode and see what's happened?
There is no hidden debug mode, or anything like that, in Microsoft Access. There are things you can do, however:
Use the shift bypass key
Using the bypass key will stop any code from automatically starting, allowing you to alter the database before it crashes
Using Control + Break
Using Control + Break stops the currently running code, and takes you to the VBA editor. However, if the application is not responding, it might not respond to Control + Break either.
Remove trust from the database
Using the security centre, you can untrust a database, blocking most code. This will allow you to access and copy database objects without code interfering.
Debug causes of database crashes (e.g. decompile)
View this answer for a guide to debug causes of database crashes. Usually, decompiling does wonders.
Hold down Shift button(s) while you open the file.
Related
I would like to find a way to let Access crash in such a way that when you re-open the database, you will get this popup message:
'The last time you opened "....accdb", it caused a serious error. Do you still want to open it?'
Reason for this that have to maintain a server with a lot of cronjobs that launch even more Access applications, and sometimes it happens that a crashed Access application cannot be launched anymore due to this popup which prevents opening the database until you click 'Yes'.
To test my solution (remove registry key HKCU\Software\Microsoft\Office\XX.0\Access\Resiliency\DisabledItems), I need to have an access database that crashes on request.
Is there a way to do this with a vba script?
Write a script that kills the running process.
I'm having a very peculiar issue with SQL Server Data Tools 2012. Whenever I attempt to launch the report previewer, I get the following exception:
There was no endpoint listening at net.pipe://localhost/PreviewProcessingServce7324/ReportProcessing that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more deatils.
As far as I can tell, nothing I did triggered the issue. It just started happening one day when I fired up SSDT. I tried the suggestion on
Report Designer Preview in SSDT throws up a 'end point' not found error.
However, my service is up and running just fine (restarting it didn't help), and using Setspn didn't do anything for it, either.
Anyone have any ideas?
That is a current bug in SSDT-BI. The current workaround for now is to right click on the report you want to preview in your Solution Explorer and click RUN.
You will also notice that if you try to preview the report for the first time a command prompt window opens up that runs the preview process, If you don't close this window and just minimize it then you can preview the report but I think the RUN method is much easier for now. Please mark as answer if this helped.
This can happen when you have some SQL Services installed and running on your machine that interfere with the Report Preview. You can check your current services by going opening Sql Server Configuration Manager:
To fix this you can do the following:
Type WinKey + R, input services.msc in the Run box, and press Enter.
Find the "Net.Pipe Listener Adapter" and either Restart or Disable it.
The workaround, as SQLnbe mentioned, is to:
Right Click the RDLC file from solution explorer
Click "Run" from there which will open up a new window.
The Preview issue was resolved for me when I deleted the .DATA files associated with the solution.
In my case I tried all the above solutions, and:
"Run" from context menu does not really work for me, as it's much, much longer than preview in VS2017, as rendering was a deciding factor in my work (lots of grouping by column etc). and render is much faster in VS compared to SSRS,
Could not find listed .Net services on my laptop,
Deleting DATA files did not fixed the issue either,
VS restart and reloading the solution.
I'm not sure if it was points 3 and 4 together that actually did the trick, but I'm putting it out there - just in case it actually is the procedure that will work for others, which is to try option 4.
I need to also note that this issue started after there was a momentary connection dropout. I need to work with WIFI instead LAN due to necessity to be roam-able, and every time I undock the laptop all my connections in SSMS are lost (and with them all the temp tables etc).
I faced the same issue and solved it.
Steps:
Right click on the report.
Click view code.
Check the parameters names in both query parameters and report parameters and make sure it's written correctly.
Close the report and open it again
Thanks
This is what I did:
Restart the .Net.Pipe service in the service console. This didn't resolve the issues.
Closed Visual Studio completely and relaunch the Visual Studio 2017 (in my case).
It seem that the preview is back. It could be the combination of (1) and (2).
None of the solution above worked for me. What did I found and it worked is to run Visual Studio as administrator.
Just closing the visual Studio by ending task with task manager and re-opening the solution worked for me to get through the error.
I am trying to generate the database scripts(tables,triggers,views,procedures) in sql server 2008, all of sudden the scriptting wizards hang up at the end state saying that scripting is completed but the close button never enable, if i stop this some of the tablels are missing, please advise
Install earlier SSMS version.
For me bug was at 15.0.18358.0, changed to 15.0.18338.0 and the wizard started working.
If the wizard says "0 Remaining", this means it has determined all the objects that it needs to script, and is writing them out to your destination. If you are writing to a file, go to that file location in Windows Explorer, and keep refreshing the view. If the file keeps growing in size, this means everything is fine and the data is still being written. Be patient, and eventually the process will finish and the Close button will become enabled.
Running Access 2010 on Citrix against a SQL Server 2008R2 backend. Occasionally my users will get an error reading:
The expression On Change you entered as the event property setting produced the following error: Overflow.
* The expression may not result in the name of a macro, the name of a user-defined function, or [Event Procedure].
* There may have been an error evaluating the function, event, or macro.
Once a user gets this error during a session, he will continue to get it until he logs out of the database front end. He can then immediately relaunch the Access front end and go do whatever it was he was attempting to do. The On Change portion will vary in event type (sometimes On Click, sometimes After Update, etc), and it will happen on different forms, but the fix is always to exit the DB then get back in and everything just works fine.
The more I learn, the more I'm starting to believe that it's got something to do with the Citrix enviornment that we're in, but I haven't been able to pin anything down.
I've seen the suggestions to copy the form, and to start with a new DB and import everything. I've done these and it hasn't really helped - i.e. this is random enough that I don't know if the frequency of issues decreased significantly after the change.
Does anyone have any additional suggestions of what I can do in my Access code?
Does anyone have any experience with this setup and have some Citrix or SQL Server tweaks that I might be able to pass along? (I don't know if our IT people will listen or try to work with me on it, but it's worth a shot.)
I'm frustrated with the randomness of this, and I hate telling my users there's nothing I can do about it, but at the moment, I'm completely stumped.
Thanks,
FreeMan
Edit - Additional details...
the users are running a compiled .accde
they are all running from a common .accde file
this is still happening for a few users to whom I have given their own personal copy to run
The goto fix for random weird stuff happening in Citrix is to disable hooking. Hooks get injected into every process running in a Citrix session, so they could be screwing up something in Access. You can configure registry entries to exclude Access from being hooked:
http://support.citrix.com/article/CTX107825
I have an issue. I have an Access Project (currently in access 2007), and the project connection properties are set to point to a hosted SQL database on our network. Unfortunately we had to move the databasem and now I have to change the connection properties as well.
However, when I open the adp file, the first thing it does is try to connect to the old database. I never get prompted or anything, the screen just sits there, and the title bar eventually indicates "not responding".
Anyone know how I can get to the connection properties, since Access never gives me a chance to do so?
Have you tried keeping the shift key held down while the database is opening to prevent any start-up forms or macros from running? If that does not help, you can change all the connections from VBScript.