I work for a gun club and we are trying to find the total number of targets shot at during a specific year. The table contains totals from years 2000-2018 and I am trying to write a query that will look at the string for the date of the shoot which is in a format like this 2010-06-13 00:00:00.000 I just care about the year so I created this query:
SELECT SUM(ShotAt) AS TotalTargets
FROM MemberShootsC
WHERE GunClubNumber = 210015 AND ShootDate LIKE '2007-%%-%% 00:00:00.000'
If I run the query up to the AND clause it works and returns a total. However, I get a null value if I highlight the whole thing. I have tried variations of the string as well. Such as this '2007%' and this '2007-- %'
Not sure what I am missing. Any help is appreciated.
Don't convert to string to query for a year, use YEAR() function instead:
SELECT SUM(ShotAt) AS TotalTargets
FROM MemberShootsC
WHERE GunClubNumber = 210015 AND YEAR(ShootDate)=2007 -- MySQL
You could also use a range query
SELECT SUM(ShotAt) AS TotalTargets
FROM MemberShootsC
WHERE GunClubNumber = 210015 AND ShootDate BETWEEN '2007-01-01' AND '2007-12-01 23:59:59.999'
Note: The above assumes that you do not store dates as strings. The function to use depends on RDBMS. In MS SQL Server you would use DATEPART(year, ShootDate) = 2007
Related
I have tried various recommendations based off of other posts with no avail.
I have a database scheme of records with a Created_Date Key, and Value would be 01/01/2017
I am trying to query the database records to give a returned count of How many records per month and which month those fall in line with.
With the following
SELECT SQL_NO_CACHE MONTH(`Created_Date`), COUNT(*)
FROM `CRM_Leads`
GROUP BY MONTH(`Created_Date`)
I return
MONTH(`Created_Date`) COUNT(*)
NULL 872
I have also tried almost all the variations on the following post
Count records for every month in a year
Any help would be appreciated.
assuming your created_date is a string of format ('dd-mm-yyyy') the you should convert as date with str_to_date
SELECT SQL_NO_CACHE MONTH(str_to_date(`Created_Date`, '%d/%m/%Y')), COUNT(*)
FROM `CRM_Leads`
GROUP BY MONTH(str_to_date(`Created_Date`, '%d/%m/%Y'))
For as long as you store date/time information as strings, you will have great difficulty using any date/time specific functions and features. If you are getting NULL from MONTH(str_to_date(Created_Date, '%d/%m/%Y')) then the str_to_date isn't converting the strings to dates and the most likely reason for this is the d m y "pattern" is not corrrect.
All you have old us about your "strings that might be dates" is that one of them looks like this: 01/01/2017. Now that could be DD/MM/YYYY or MM/DD/YYYY and we simply cannot tell which one is correct from the single value you have chosen to share with us. Look for any day value greater then 12 in your data e.g. 17/01/2017 ==> DD/MM/YYYY or 01/17/2017 ==> MM/DD/YYYY
Once you have made the choice of which pattern your "strings that might be dates" follow; apply that pattern in the str_to_date() function. You migh want to try a few different patterns to get the best one (and these are just 3 of many you could try):
# which pattern is best for you?
SELECT Created_Date
, str_to_date(`Created_Date`, '%d/%m/%Y') "d/m/y"
, str_to_date(`Created_Date`, '%m/%d/%Y') "m/d/y"
, str_to_date(`Created_Date`, '%Y-%m-%d') "y-m-d"
FROM `CRM_Leads`
You will not have success with your group by query until you choose the most appropriate d m y pattern to apply in teh str_to_date function. Note here that you might also have a variety of patterns in your data, in which case you have an even bigger problem to solve.
Once you have made the choice of which pattern your "strings that might be dates" follow; apply that pattern in the str_to_date() function and ONLY THEN your group by query will work.
I know calculating age from DOB is relatively simple but I have an issue with different data entry formats in the database. Also, I know this can be easier using PHP, but I don't know PHP and only have MySQL to work with.
The DOB entered into the DB is entered as "month/day/year" or "00/00/0000". But when calculating against today's date, the date would be formatted as "year-month-day" or "0000-00-00". Furthermore, the month placed in the DOB field can have either a one number month (1/01/1999) or a two number month (01/01/1999), so it's not consistent.
I am trying to use the below to utilize CONCAT, SUBSTRING and LOCATE to output the DOB in a better suited format for the age calculation. I think I'm close but not quite there. Any help would be very much appreciated.
SELECT
CONCAT(SUBSTRING(APPU_DOB,-4,4),'-', SUBSTRING(APPU_DOB,LOCATE('/', APPU_DOB),1),'-',SUBSTRING(APPU_DOB,4,2))
FROM APPU_APP_USER
JOIN APPL_APP ON APPU_APPL_ID = APPL_ID
WHERE DATE_FORMAT(APPL_CREATE_DT, '%Y-%M-%D') >= '2014-01-01';
Instead of Concat use str_to_date function.
select str_to_date( appu_dob, '%m/%d/%Y' ) as 'dob';
on 1/01/1999 it returns a valid date formatted object with value 1999-01-01.
You can use it on other date strings that have single or two digit day or month numbers.
Note: To represent or refer a month, use small case m but not capital M, in the format pattern string.
And you should better redefine the data type of appu_dob field to date. So that you can easily apply date specific functions on it for any calculations.
i need to retreive data from database with the condition from date to to date using between query,
my query is,
select * from Master where Date between '01-08-2013' and '30-08-2013'
but it retreive all data from the table...
i need only data with in that date..
i tried another one like,
select * from PatientMaster where EntryDate >= '01-08-2013' and EntryDate<= '30-08-2013'
how its posible..
whats wrong with my query...
sorry im very bad in english...
thank you in advance...
A date string has the syntax YYYY-MM-DD and not DD-MM-YYYY
select * from Master
where `Date` between '2013-08-01' and '2013-08-30'
for that you can use
select * from Master where Date >='01-08-2013' and dateadd(dd,1,'30-08-2013')
You have to convert your strings to dates. This page shows you how to do it in mysql, which is what you have tagged. For sql server, which is in your subject line, use this page.
Then you do a slight modification of your 2nd attempt. Instead of
and EntryDate <= the end date
you want
and EntryDate < the day after the end date
That takes care of any time components. It might not matter in your case, but it's a good habit to get into.
You'll be looking for an query that works with your format? (dd-mm-yy)
CAST to the desired format!
http://www.w3schools.com/sql/func_convert.asp
105 = dd-mm-yy
SELECT * FROM Master
WHERE CONVERT(date, Date, 105) BETWEEN '01-08-13' and '30-08-13'
Be conscious with regards of the choice of data type for date Columns,
with or without time, day or year first etc. and please do not use varchar
for dates...
know that it CAN be confusing to call a date column for only Date...
be consistent with high/lower case.
so i have a table with hundreds records. And a have a filed name "created" type with a datetime format. Now I want to make and archive with the months. For example January, February.... etc. I need to create query to find all possible months. For example if my records start from 2011/05/01 to now I will need to fetch the months that means months 5,6,7,8,9,10,11,12.
Is there a way to that ???
If you are looking at the list of all Months present in the created field (as I understand your query) then do this:
SELECT DISTINCT(MONTH(created)) FROM posts;
The resulting set would be the list of unique months in the field. If this will complain then try:
SELECT DISTINCT(MONTH(DATE(created))) FROM posts;
You can then substitute MONTH for MONTHNAME and get names instead. I did not add the WHERE clause to these queries but you can limit the dataset you are looking at as you see fit.
For more information take a look at http://dev.mysql.com/doc/refman/5.1/en/functions.html this has a list of quite a few functions that MySQL natively provides.
Yes, use the DATE_FORMAT function and other date and time functions.
More details here
For example, if you want all your records for December 2011:
SELECT * FROM posts WHERE YEAR(created) = 2011 AND MONTH(created) = 12
If I have MySQL query like this, summing word frequencies per week:
SELECT
SUM(`city`),
SUM(`officers`),
SUM(`uk`),
SUM(`wednesday`),
DATE_FORMAT(`dateTime`, '%d/%m/%Y')
FROM myTable
WHERE dateTime BETWEEN '2011-09-28 18:00:00' AND '2011-10-29 18:59:00'
GROUP BY WEEK(dateTime)
The results given by MySQL take the first value of column dateTime, in this case 28/09/2011 which happens to be a Saturday.
Is it possible to adjust the query in MySQL to show the date upon which the week commences, even if there is no data available, so that for the above, 2011-09-28 would be replaced with 2011/09/26 instead? That is, the date of the start of the week, being a Monday. Or would it be better to adjust the dates programmatically after the query has run?
The dateTime column is in format 2011/10/02 12:05:00
It is possible to do it in SQL but it would be better to do it in your program code as it would be more efficient and easier. Also, while MySQL accepts your query, it doesn't quite make sense - you have DATE_FORMAT(dateTime, '%d/%m/%Y') in select's field list while you group by WEEK(dateTime). This means that the DB engine has to select random date from current group (week) for each row. Ie consider you have records for 27.09.2011, 28.09.2011 and 29.09.2011 - they all fall onto same week, so in the final resultset only one row is generated for those three records. Now which date out of those three should be picked for the DATE_FORMAT() call? Answer would be somewhat simpler if there is ORDER BY in the query but it still doesn't quite make sense to use fields/expressions in the field list which aren't in GROUP BY or which aren't aggregates. You should really return the week number in the select list (instead of DATE_FORMAT call) and then in your code calculate the start and end dates from it.