I have an expression in SSRS like this.
IIF(First(Fields!val.Value, "box29")="Yes" AND Sum(Fields!SortOrder.Value, "InsuranceInformation") > 1,"",
Valu val is Yes and Sortorder is 2. That is both expression satisfying. But this expression is not satisfying with AND.
Any idea on this?
I think you need to finish your expression:
=IIF(First(Fields!val.Value, "box29")="Yes" And Sum(Fields!SortOrder.Value, "InsuranceInformation") > 1, "And expession statisfyed", "And expression not statisfyed")
Related
Using the following filter for a SSRS report.
Expression:
=If((Parameters!GroupA.Value() In Fields!Related_GroupA.Value) Or (Parameters!GroupB.Value() In Fields!Related_GroupB.Value) Or (Parameters!GroupA.Value() In Fields!GroupA.Value) Or (Parameters!GroupB.Value() In Fields!GroupB.Value))
Operator:
=
Value:
True
Believe the syntax for the "If statement" and use of "in" and "Or" may be incorrect. Need to return the results if the value selected in the report parameter, appears in one of two places. (e.g. if Parameters!GroupA is in Fields!Related_GroupA or in Fields!GroupA)
Current Error:
'If' operator requires either two or three operands.
'If' operator requires either two or three operands.
You have the "if" part in your statement but you don't specify what to do if it returns true or false. Also, use "iif" instead of "if."
=iif(
(Parameters!GroupA.Value In Fields!Related_GroupA.Value) Or
(Parameters!GroupB.Value In Fields!Related_GroupB.Value) Or
(Parameters!GroupA.Value In Fields!GroupA.Value) Or
(Parameters!GroupB.Value In Fields!GroupB.Value), <Value if true>, <Value if false>)
If you only want to return true or false then you don't need to use the iif operator because the "=" operator returns a boolean value (True/False).
If this is the case then you can simply use:
=(Parameters!GroupA.Value = Fields!Related_GroupA.Value) Or
(Parameters!GroupB.Value = Fields!Related_GroupB.Value) Or
(Parameters!GroupA.Value = Fields!GroupA.Value) Or
(Parameters!GroupB.Value = Fields!GroupB.Value)
Note that I changed "In" to "=" because there isn't an IN operator you can use in the ssrs expressions but there are a few workarounds. See here and here.
I'm stuck on an expression. Below is programmatically what i want to do, but SSRS is not having it... How can I get this to work?
=IIf(Fields!TransTypeLabel.Value = "Hour", Fields!SalesAmount.Value, IIf(Fields!TransTypeLabel.Value = "Fee" AND Fields!CategoryId.Value = "TIME_FEE", Fields!SalesAmount.Value, 0), 0)
ake the final " , 0" out (but not the end brace). You also have missed .Value (or .Label depending on what you actually want) from the end of some field references. e.g. Fields!TransTypeLabel should. be Fields!TransTypeLabel.Value . Or maybe that was a type and should have read Fields!TransType.Label ?
I have an expression in a table that checks if there was a return value.
If the query returns empty or null I want to set the value to 0.
=IIF(IsNothing(Fields!DndCount.Value),0,Fields!DndCount.Value)
But if the query returns empty IsNothing() does not work.
I have tried this code and it worked for me.
IIF(Sum(Fields!DndCount.Value)Is Nothing, "0", Sum(Fields!DndCount.Value))
Alternative solution to avoid using expressions, change the cell format to #,##0 in properties. Easier then to pair it up with count or sum.
Try this:
=IIF(Fields!DndCount.Value=0 OR
IsNothing(Fields!DndCount.Value)=0 OR
Fields!DndCount.Value="null",0,Fields!DndCount.Value)
Since IsNothing will return a True or False value you need to set your expression as:
=IIF(IsNothing(Field1) = True, 0, Field2)
Hope it helps.
You can also try to use the IsMissing expression of the field,
like this:
=IIF(Fields!Accounting_Amount.IsMissing, 0, Fields!Accounting_Amount.Value)
I want to check a value in an SSRS report to make sure that it isn't null, first, and then that it equals a particular value. My expression is as follows:
=iif(IsNothing(First(Fields!RecordStatusFlagId.Value, "DataSource")),"",(First(Fields!RecordStatusFlagId.Value, "DataSource") = 1,"","DELETED"))
So if RecordStatusFlagID.Value is not null and it doesn't equal 1 write "DELETED". Otherwise write "".
However, this gives me the error:
Error 75 [rsCompilerErrorInExpression] The Value expression for the textrun ‘textbox21.Paragraphs[0].TextRuns[0]’ contains an error: [BC30198] ')' expected. C:\Reports\MyReport.rdl 0 0
which doesn't make sense since I've verified that all of my parentheses are closed and matched.
Is it even possible to use an expression as the second term in the IsNothing operator?
I needed to add an iif to the second portion of the IsNothing expression
=iif(IsNothing(First(Fields!RecordStatusFlagId.Value, "DataSource")),"",iif(First(Fields!RecordStatusFlagId.Value, "DataSource") = 1,"","DELETED"))
I think you could simplify that into a single iif() statement:
=iif(
First(Fields!RecordStatusFlagId.Value, "DataSource") <> 1
And First(Fields!RecordStatusFlagId.Value, "DataSource") Is Not Nothing
, "DELETED"
, ""
)
My situation is
I have a parameter, this is a list, allowing multi values. That mean the first record in the list is 'Select All'
When user select All I need to include in my report all records that match with the list plus those that are blank. (My dataset is returning these)
When user select only 1 or a few I want to include only these records. No those that are blank
My problem:
I have a filter in my dataset that evaluate a parameter in a list, but I need to add a conditional filter to include a blank records when the selection will be "Select All"
I tried to use expression but this doesn't work
Filter expression
Fields!NAME.Value in = Parameters!List.Value !!!!!!!!!!!! Work Fine
But I need to change it like as
If Parameters!List.Value = 'Select All' Then
Fields!NAME.Value in = Parameters!List.Value or Fields!NAME.Value = " "
Else
Fields!NAME.Value in = Parameters!List.Value
End
Can you give an advice who can I resolve it please !!!
I'm working in SSRS R2
Thanks!!
This worked for me
Expression: =IIF(Parameters!pLocation.Value <> " All Locations", Fields!LOCATION.Value, FALSE)
Operator: =
Value: =IIF(Parameters!pLocation.Value <> " All Locations", Parameters!pLocation.Value, FALSE)
If you use Filter on your Dataset, try this:
Expression: [NAME]
Operator: IN
Value (fx): =Split(Replace(Join(Parameters!List.Value, ","), "Select All", " "), ",")
Try to work along this path. Basically you can reconstruct the multi value items into a string with Join(), and deconstruct it again into array by using Split(); where in between, you can manipulate them, for modifying (e.g. converting "Select All" into " "), adding (imitating "OR"), or removing extra items.
There is an alternative for this.
Add one more item to the paramater dataset values say "Not Available" as Label and value with the null. then there will be no change in the stored procedure and you can retrieve the data.
If the user select the specific item then he will get those values only. If he selects all then he will get the data for the null also with the all the others.
Hope this will help
You can put the logic in just one location if you do it this way.
You filter on the parameter, unless it's all values then the filter always matches.
Just a little cleaner.
Expression: =IIF(Parameters!pLocation.Value <> " All Locations", Fields!LOCATION.Value, " All Locations")
Operator: =
Value: =Parameters!pLocation.Value