I'm getting errors while trying to access an Oracle view through an SSIS package. First, since, I'm running 64-bit windows, I installed the 64-bit Oracle 12c Client. But when I tested the connection I got this error:
Test connection failed because of an error in initializing provider. Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
Then I tried installing the 32-bit Oracle 12c Client but got another, different error.
Test connection failed because of an error in initializing provider. ORA-12154: TNS:could not resolve the connect identifier specified
Lastly I tried installing both clients together but the last error persisted. Not sure what's going on here...
The first error comes from the fact that Visual studio is 32 bit and it's trying to use 32 bit drivers by default. You can change the runtime settings like this: https://stackoverflow.com/a/28235255/5605866
The second error might refer to tnsnames.ora file not having all the settings correctly, like in here: https://stackoverflow.com/a/40399744/5605866
Related
The ultimate goal is for users to be able to run a report that looks pretty and grabs current information from our database. We'd like to use SQL Report Builder since we're already using it for other reports. The database is Cisco UCCX and we're accessing it with an ODBC connection from our reporting services SQL Server 2008 R2.
We've successfully setup System ODBC connections with both 64bit and 32bit drivers. When trying to access the connections though, we're receiving errors.
Using the 32bit driver, we try to create a Data Source in SSRS for use by Report Builder and receive the error:
"ERROR [IM014] [Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application"
Using the 64bit driver, we can successfully create and test the ODBC connection as a Data Source, but then when we attempt to create a Dataset with it in Report Builder, we get this error:
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Error received using the 64bit driver for ODBC connection
I ran into this recently. You need to have the same name for both 32 and 64bit DSNs. It's annoying because SSRS can run 64bit, but reportbuilder only exists in 32bit. So parts of reportbuilder seem to work (like running queries), but some don't (like refreshing query fields). Just have a DSN for both 32bit and 64bit, then make sure they're both the same name and the problems should stop.
You may be hitting an old but recurring issue with minor corruption in the Windows Registry.
The corruption takes the form of entries containing this 4-character string —
#=""
These entries aren't visible anywhere except Registry export files — the Registry Editor ignores them completely — but they can lead to a number of undesired behaviors, including the error you report.
NOTE: On your 64-bit Windows machine, there are naturally some complications tied to the 32-bit Registry. This Microsoft KB article may be sufficient to get you through these.
I suggest that you use the 64-bit Registry Editor (%systemroot%\system32\regedit) to export the following branches (where these problematic entries tend to be found) —
HKEY_LOCAL_MACHINE\Software\ODBC
HKEY_CURRENT_USER\Software\ODBC
HKEY_LOCAL_MACHINE\Software\WOW6432Node\ODBC
HKEY_CURRENT_USER\Software\WOW6432Node\ODBC
Edit these files in any text editor (Notepad or Wordpad are generally fine), and delete all lines which consist of that 4-character string, above. Then, delete the Registry tree segment(s) you exported, and import from the edited files — thereby restoring the tree segment(s), minus the corruption.
It won't hurt to repeat the above process with the 32-bit Registry Editor (%systemroot%\syswow64\regedit), but as you've described the issue, I don't think you'll find any #="" in the 32-bit export.
I have a SSIS package on sql server 2012.
It utilizes an easysoft odbc connection to access and optima attendance controller. In my project, I have
Run64BitRuntime is false. My SQL Agent Job is also set for 32 bit run time.
I use and SSIS proxy account and it is an admin account.
I have another package running on the same server using a different odbc provider, timebersoft, but it runs without issue.
If you need more details please let me know what you need to know.
The following errors only occur when the package is exacuted by a sql server agent job.
Data Flow TAsk: Error: ODBC source failed validation and returned error code 0x80004005
attnd: Error: There was an error trying to establish and Open Database Connectivity (ODBC) connection with the database server.
Data Flow Task: Error: The AquireConnection method call to the connection manager Attnd failed with error code 0xC0014009.
I have attempted to create a hello world version and every time the only thing to cause it to crash is when i try to connect to the easysoft odbc. the driver is installed (Name{Easysoft IB6 ODBC}; Version{1.00.01.70}; Company{Easysoft Limited}; File{IB6ODBC.DLL}; Date{6/5/2002}) the user is the same administrator for the successful and unsuccessful attempts
Update: July 21:
1. Tried the installation that wasn't it.
2. Tried Operation system(cmdline) for using 32 bit detexec.exe failed again. (double checked and the command I used did work in the cmdline)
Here are a couple of things you must check (going from front end to back end). See what you are missing.
Run64BitRuntime is set to false in the project setting.
The same configuration setting (having Run64BitRuntime set to false) should be used for deployment.
If you are using an external configuration file, and that has this property, see that it is set to false.
SQL Server > Database Engine > SQL Server Agent > Jobs > Your job's properties > Select the step where you run the SSIS and click Edit> In the 'Execution Options' tab check 'Use 32 bit runtime'
Hope this helps!
"You can use our Interbase ODBC driver from SQL Server Agent or any ODBC enabled application. You will however need to install a 64-bit Interbase client that is compatable with your Interbase server before you install the Easysoft ODBC driver. This can be obtained from Embarcadero"
the issue appears to be with the software. In order to use easysoft on a 64 bit system i need the 64 bit driver properly installed.
Thank you #billinkc for pointing out the installation issue.
It has been a real struggle trying to get this to work on my Windows 7 64-bit machine.
I have a package which moves data from Oracle to SQL and, on our Windows 2008 R2 test server it works fine (within BIDS).
What I have tried so far....
Copied BIDS from Program Files (x86) to Program Files (to eliminate
the brackets issue)
Installed 32-bit and 64-bit Oracle as well as 32-bit ODAC.
Tried setting DelayedValidation to TRUE
Installed TOAD and am able to connect to Oracle database.
Within BIDS, I can test the connection successfully and even preview it, however when I try to execute the package fails on the DataSource task (ie Oracle connection).
Very frustrating and I appreciate any help on this.
Complete error below:
[OLE DB Source [1]] Error: SSIS Error Code
DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The
AcquireConnection method call to the connection manager "LICS" failed
with error code 0xC0202009. There may be error messages posted before
this with more information on why the AcquireConnection method call
failed.
[SSIS.Pipeline] Error: component "OLE DB Source" (1) failed validation
and returned error code 0xC020801C.
thanks,
KS
Try doing this since your driver is 32 bits.
Right click on project > properties > Debugging > Run64bitsRuntime > False.
You guys are going to laugh.... but I set Run64bitsRuntime to TRUE and it works lol! I guess it is using the 64-bit driver then - now I'm confused. I dont even want to know whats going on here as long as it works!
I am using Windows7 and Microsoft office 2010 and mysql5. I want to connect Microsoft excel with my database mysql. I have installed all the drivers. I have created a data source as well. I am going step-by-step to connect, but at the end when i click on test connections, I receive this error message
Test connection failed because of error in intializing provider unspecified error.
You probably are not using the right ODBC driver.
Please check if you downloaded the one that matches your MySQL database. (not only version number, but especially if it is a 32-bit server or a 64-bit server).
I'm currently trying to run a classic ASP application which I've been given source code for. I want to set up on my 64bit Windows 7 dev machine and am having trouble with an ODBC based data connection to a MySQL instance.
I'm seeing the error:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Driver Manager] Data source name not found
and no default driver specified
/includes/<File Name>.asp, line 100
What I've tried:
The connection is DSN-less.
The application is running under IIS app pool with local system permissions. w3wp.exe can be seen running under NT AUTHORITY/SYSTEM in process monitor.
The application is running under IIS app pool with 32 bit applications allowed to run.
Have tried with Connector/ODBC 5.1.10 64 bit version only installed from http://dev.mysql.com (At this point no driver was listed under C:\Windows\SysWOW64\odbcad32.exe but was under C:\Windows\system32\odbcad32.exe)
Have tried with Connector/ODBC 5.1.10 32 bit version only installed from http://dev.mysql.com (At this point no driver was listed under C:\Windows\system32\odbcad32.exe but was under C:\Windows\SysWOW64\odbcad32.exe)
Have tried with Connector/ODBC 5.1.10 32 bit and 64 bit versions installed.
Verified driver name is not misspelled. Along with other checks from here http://support.microsoft.com/kb/306345.
Driver={MySQL ODBC 5.1 Driver};Server=localhost;Database=DBName;User=root;Password=Password;Option=3
Additional Information:
I'm monitoring in process monitor, and the two results are:
PATH NOT FOUND (Looking for .asp/web.config which seems odd.
BUFFER OVERFLOW
Both entries show:
User: NT AUTHORITY\SYSTEM
Process:
C:\Windows\SysWOW64\inetsrv\w3wp.exe
C:\Windows\SysWOW64\odbcint.dll
I'm stumped can any one make a suggestion on how I get this running in the context I have described?
Solved the problem now. Recording here in case this of use to others.
The issue was much simpler than it first appeared. The problem was that the application used a mixture of named and unnamed datasources (DSN / DSN-Less).
It was not apparent to me that any named connections were used until I set up the application for debugging in Visual studio. Here is a rough guide to debugging the application in visual studio (Except I used HTTP based website, rather than file system):
http://www.codeproject.com/Articles/28792/Debugging-Classic-ASP-VBScript-in-Visual-Studio-20
Following creating the required DSN, there were some further exceptions being thrown regarding default values in database columns. This was due to a MySQL setting that can be changed in the my.ini file.
http://bugs.mysql.com/bug.php?id=14306
C:\Program Files (x86)\MySQL\MySQL Server 5.5\my.ini
# Set the SQL mode to strict
# sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
sql-mode=""
I found this to work from Windows to MySQL as a DSN-less connection. The trick was to ELIMINATE the port spec at the end of the server address.
"DRIVER={MySQL ODBC 5.3 UNICODE Driver}; Server=**;Database=**;User=**;Password=**; OPTION=3"
Note: Server string is the internet address of the server, BUT NO PORT
SPECIFIED - ie, NO ":3306" on the end