Related
If I have a query like:
Select EmployeeId
From Employee
Where EmployeeTypeId IN (1,2,3)
and I have an index on the EmployeeTypeId field, does SQL server still use that index?
Yeah, that's right. If your Employee table has 10,000 records, and only 5 records have EmployeeTypeId in (1,2,3), then it will most likely use the index to fetch the records. However, if it finds that 9,000 records have the EmployeeTypeId in (1,2,3), then it would most likely just do a table scan to get the corresponding EmployeeIds, as it's faster just to run through the whole table than to go to each branch of the index tree and look at the records individually.
SQL Server does a lot of stuff to try and optimize how the queries run. However, sometimes it doesn't get the right answer. If you know that SQL Server isn't using the index, by looking at the execution plan in query analyzer, you can tell the query engine to use a specific index with the following change to your query.
SELECT EmployeeId FROM Employee WITH (Index(Index_EmployeeTypeId )) WHERE EmployeeTypeId IN (1,2,3)
Assuming the index you have on the EmployeeTypeId field is named Index_EmployeeTypeId.
Usually it would, unless the IN clause covers too much of the table, and then it will do a table scan. Best way to find out in your specific case would be to run it in the query analyzer, and check out the execution plan.
Unless technology has improved in ways I can't imagine of late, the "IN" query shown will produce a result that's effectively the OR-ing of three result sets, one for each of the values in the "IN" list. The IN clause becomes an equality condition for each of the list and will use an index if appropriate. In the case of unique IDs and a large enough table then I'd expect the optimiser to use an index.
If the items in the list were to be non-unique however, and I guess in the example that a "TypeId" is a foreign key, then I'm more interested in the distribution. I'm wondering if the optimiser will check the stats for each value in the list? Say it checks the first value and finds it's in 20% of the rows (of a large enough table to matter). It'll probably table scan. But will the same query plan be used for the other two, even if they're unique?
It's probably moot - something like an Employee table is likely to be small enough that it will stay cached in memory and you probably wouldn't notice a difference between that and indexed retrieval anyway.
And lastly, while I'm preaching, beware the query in the IN clause: it's often a quick way to get something working and (for me at least) can be a good way to express the requirement, but it's almost always better restated as a join. Your optimiser may be smart enough to spot this, but then again it may not. If you don't currently performance-check against production data volumes, do so - in these days of cost-based optimisation you can't be certain of the query plan until you have a full load and representative statistics. If you can't, then be prepared for surprises in production...
So there's the potential for an "IN" clause to run a table scan, but the optimizer will
try and work out the best way to deal with it?
Whether an index is used doesn't so much vary on the type of query as much of the type and distribution of data in the table(s), how up-to-date your table statistics are, and the actual datatype of the column.
The other posters are correct that an index will be used over a table scan if:
The query won't access more than a certain percent of the rows indexed (say ~10% but should vary between DBMS's).
Alternatively, if there are a lot of rows, but relatively few unique values in the column, it also may be faster to do a table scan.
The other variable that might not be that obvious is making sure that the datatypes of the values being compared are the same. In PostgreSQL, I don't think that indexes will be used if you're filtering on a float but your column is made up of ints. There are also some operators that don't support index use (again, in PostgreSQL, the ILIKE operator is like this).
As noted though, always check the query analyser when in doubt and your DBMS's documentation is your friend.
#Mike: Thanks for the detailed analysis. There are definately some interesting points you make there. The example I posted is somewhat trivial but the basis of the question came from using NHibernate.
With NHibernate, you can write a clause like this:
int[] employeeIds = new int[]{1, 5, 23463, 32523};
NHibernateSession.CreateCriteria(typeof(Employee))
.Add(Restrictions.InG("EmployeeId",employeeIds))
NHibernate then generates a query which looks like
select * from employee where employeeid in (1, 5, 23463, 32523)
So as you and others have pointed out, it looks like there are going to be times where an index will be used or a table scan will happen, but you can't really determine that until runtime.
Select EmployeeId From Employee USE(INDEX(EmployeeTypeId))
This query will search using the index you have created. It works for me. Please do a try..
I've been using indexes on my MySQL databases for a while now but never properly learnt about them. Generally I put an index on any fields that I will be searching or selecting using a WHERE clause but sometimes it doesn't seem so black and white.
What are the best practices for MySQL indexes?
Example situations/dilemmas:
If a table has six columns and all of them are searchable, should I index all of them or none of them?
What are the negative performance impacts of indexing?
If I have a VARCHAR 2500 column which is searchable from parts of my site, should I index it?
You should definitely spend some time reading up on indexing, there's a lot written about it, and it's important to understand what's going on.
Broadly speaking, an index imposes an ordering on the rows of a table.
For simplicity's sake, imagine a table is just a big CSV file. Whenever a row is inserted, it's inserted at the end. So the "natural" ordering of the table is just the order in which rows were inserted.
Imagine you've got that CSV file loaded up in a very rudimentary spreadsheet application. All this spreadsheet does is display the data, and numbers the rows in sequential order.
Now imagine that you need to find all the rows that have some value "M" in the third column. Given what you have available, you have only one option. You scan the table checking the value of the third column for each row. If you've got a lot of rows, this method (a "table scan") can take a long time!
Now imagine that in addition to this table, you've got an index. This particular index is the index of values in the third column. The index lists all of the values from the third column, in some meaningful order (say, alphabetically) and for each of them, provides a list of row numbers where that value appears.
Now you have a good strategy for finding all the rows where the value of the third column is "M". For instance, you can perform a binary search! Whereas the table scan requires you to look N rows (where N is the number of rows), the binary search only requires that you look at log-n index entries, in the very worst case. Wow, that's sure a lot easier!
Of course, if you have this index, and you're adding rows to the table (at the end, since that's how our conceptual table works), you need to update the index each and every time. So you do a little more work while you're writing new rows, but you save a ton of time when you're searching for something.
So, in general, indexing creates a tradeoff between read efficiency and write efficiency. With no indexes, inserts can be very fast -- the database engine just adds a row to the table. As you add indexes, the engine must update each index while performing the insert.
On the other hand, reads become a lot faster.
Hopefully that covers your first two questions (as others have answered -- you need to find the right balance).
Your third scenario is a little more complicated. If you're using LIKE, indexing engines will typically help with your read speed up to the first "%". In other words, if you're SELECTing WHERE column LIKE 'foo%bar%', the database will use the index to find all the rows where column starts with "foo", and then need to scan that intermediate rowset to find the subset that contains "bar". SELECT ... WHERE column LIKE '%bar%' can't use the index. I hope you can see why.
Finally, you need to start thinking about indexes on more than one column. The concept is the same, and behaves similarly to the LIKE stuff -- essentially, if you have an index on (a,b,c), the engine will continue using the index from left to right as best it can. So a search on column a might use the (a,b,c) index, as would one on (a,b). However, the engine would need to do a full table scan if you were searching WHERE b=5 AND c=1)
Hopefully this helps shed a little light, but I must reiterate that you're best off spending a few hours digging around for good articles that explain these things in depth. It's also a good idea to read your particular database server's documentation. The way indices are implemented and used by query planners can vary pretty widely.
Check out presentations like More Mastering the Art of Indexing.
Update 12/2012: I have posted a new presentation of mine: How to Design Indexes, Really. I presented this in October 2012 at ZendCon in Santa Clara, and in December 2012 at Percona Live London.
Designing the best indexes is a process that has to match the queries you run in your app.
It's hard to recommend any general-purpose rules about which columns are best to index, or whether you should index all columns, no columns, which indexes should span multiple columns, etc. It depends on the queries you need to run.
Yes, there is some overhead so you shouldn't create indexes needlessly. But you should create the indexes that give benefit to the queries you need to run quickly. The overhead of an index is usually far outweighed by its benefit.
For a column that is VARCHAR(2500), you probably want to use a FULLTEXT index or a prefix index:
CREATE INDEX i ON SomeTable(longVarchar(100));
Note that a conventional index can't help if you're searching for words that may be in the middle of that long varchar. For that, use a fulltext index.
I won't repeat some of the good advice in other answers, but will add:
Compound Indices
You can create compound indices - an index that includes multiple columns. MySQL can use these from left to right. So if you have:
Table A
Id
Name
Category
Age
Description
if you have a compound index that includes Name/Category/Age in that order, these WHERE clauses would use the index:
WHERE Name='Eric' and Category='A'
WHERE Name='Eric' and Category='A' and Age > 18
but
WHERE Category='A' and Age > 18
would not use that index because everything has to be used from left to right.
Explain
Use Explain / Explain Extended to understand what indices are available to MySQL and which one it actually selects. MySQL will only use ONE key per query.
EXPLAIN EXTENDED SELECT * from Table WHERE Something='ABC'
Slow Query Log
Turn on the slow query log to see which queries are running slow.
Wide Columns
If you have a wide column where MOST of the distinction happens in the first several characters, you can use only the first N characters in your index. Example: We have a ReferenceNumber column defined as varchar(255) but 97% of the cases, the reference number is 10 characters or less. I changed the index to only look at the first 10 characters and improved performance quite a bit.
If a table has six columns and all of them are searchable, should i index all of them or none of them
Are you searching on a field by field basis or are some searches using multiple fields?
Which fields are most being searched on?
What are the field types? (Index works better on INTs than on VARCHARs for example)
Have you tried using EXPLAIN on the queries that are being run?
What are the negetive performance impacts of indexing
UPDATEs and INSERTs will be slower. There's also the extra storage space requirments, but that's usual unimportant these days.
If i have a VARCHAR 2500 column which is searchable from parts of my site, should i index it
No, unless it's UNIQUE (which means it's already indexed) or you only search for exact matches on that field (not using LIKE or mySQL's fulltext search).
Generally I put an index on any fields that i will be searching or selecting using a WHERE clause
I'd normally index the fields that are the most queried, and then INTs/BOOLEANs/ENUMs rather that fields that are VARCHARS. Don't forget, often you need to create an index on combined fields, rather than an index on an individual field. Use EXPLAIN, and check the slow log.
Load Data Efficiently: Indexes speed up retrievals but slow down inserts and deletes, as well as updates of values in indexed columns. That is, indexes slow down most operations that involve writing. This occurs because writing a row requires writing not only the data row, it requires changes to any indexes as well. The more indexes a table has, the more changes need to be made, and the greater the average performance degradation. Most tables receive many reads and few writes, but for a table with a high percentage of writes, the cost of index updating might be significant.
Avoid Indexes: If you don’t need a particular index to help queries perform better, don’t create it.
Disk Space: An index takes up disk space, and multiple indexes take up correspondingly more space. This might cause you to reach a table size limit more quickly than if there are no indexes. Avoid indexes wherever possible.
Takeaway: Don't over index
In general, indices help speedup database search, having the disadvantage of using extra disk space and slowing INSERT / UPDATE / DELETE queries. Use EXPLAIN and read the results to find out when MySQL uses your indices.
If a table has six columns and all of them are searchable, should i index all of them or none of them?
Indexing all six columns isn't always the best practice.
(a) Are you going to use any of those columns when searching for specific information?
(b) What is the selectivity of those columns (how many distinct values are there stored, in comparison to the total amount of records on the table)?
MySQL uses a cost-based optimizer, which tries to find the "cheapest" path when performing a query. And fields with low selectivity aren't good candidates.
What are the negetive performance impacts of indexing?
Already answered: extra disk space, lower performance during insert - update - delete.
If i have a VARCHAR 2500 column which is searchable from parts of my site, should i index it?
Try the FULLTEXT Index.
1/2) Indexes speed up certain select operations but they slow down other operations like insert, update and deletes. It can be a fine balance.
3) use a full text index or perhaps sphinx
My thinking is that if I put my ANDs that filter out a greater number of rows before those that filter out just a few, my query should run quicker since that selection set is much smaller between And statements.
But does the order of AND in the WHERE clause of an SQL Statement really effect the performance of the SQL that much or are the engines optimized already for this?
It really depends on the optimiser.
It shouldn't matter because it's the optimiser's job to figure out the optimal way to run your query regardless of how you describe it.
In practice, no optimiser is perfect so you might find that re-ordering the clauses does make a difference to particular queries. The only way to know for sure is to test it yourself with your own schema, data etc.
Most SQL engines are optimized to do this work for you. However, I have found situations in which trying to carve down the largest table first can make a big difference - it doesn't hurt !
A lot depends how the indices are set up. If an index exists which combines the two keys, the optimizer should be able to answer the query with a single index search. Otherwise if independent indices exist for both keys, the optimizer may get a list of the records satisfying each key and merge the lists. If an index exists for one condition but not the other, the optimizer should filter using the indexed list first. In any of those scenarios, it shouldn't matter what order the conditions are listed.
If none of the conditions apply, the order the conditions are specified may affect the order of evaluation, but since the database is going to have to fetch every single record to satisfy the query, the time spent fetching will likely dwarf the time spent evaluating the conditions.
I know I need to have a primary key set, and to set anything that should be unique as a unique key, but what is an INDEX and how do I use them?
What are the benefits? Pros & Cons? I notice I can either use them or not, when should I?
Short answer:
Indexes speed up SELECT's and slow down INSERT's.
Usually it's better to have indexes, because they speed up select more than they slow down insert.
On an UPDATE the index can speed things way up if an indexed field is used in the WHERE clause and slow things down if you update one of the indexed fields.
How do you know when to use an index
Add EXPLAIN in front of your SELECT statement.
Like so:
EXPLAIN SELECT * FROM table1
WHERE unindexfield1 > unindexedfield2
ORDER BY unindexedfield3
Will show you how much work MySQL will have to do on each of the unindexed fields.
Using that info you can decide if it is worthwhile to add indexes or not.
Explain can also tell you if it is better to drop and index
EXPLAIN SELECT * FROM table1
WHERE indexedfield1 > indexedfield2
ORDER BY indexedfield3
If very little rows are selected, or MySQL decided to ignore the index (it does that from time to time) then you might as well drop the index, because it is slowing down your inserts but not speeding up your select's.
Then again it might also be that your select statement is not clever enough.
(Sorry for the complexity in the answer, I was trying to keep it simple, but failed).
Link:
MySQL indexes - what are the best practices?
Pros:
Faster lookup for results. This is all about reducing the # of Disk IO's. Instead of scanning the entire table for the results, you can reduce the number of disk IO's(page fetches) by using index structures such as B-Trees or Hash Indexes to get to your data faster.
Cons:
Slower writes(potentially). Not only do you have to write your data to your tables, but you also have to write to your indexes. This may cause the system to restructure the index structure(Hash Index, B-Tree etc), which can be very computationally expensive.
Takes up more disk space, naturally. You are storing more data.
The easiest way to think about an index is to think about a dictionary. It has words and it has definitions corresponding to those words. The dictionary has an index on "word" because when you go to a dictionary you want to look up a word quickly, then get its definition. A dictionary usually contains just one index - an index by word.
A database is analogous. When you have a bunch of data in the database, you will have certain ways that you want to get it out. Let's say you have a User table and you often look up a user by the FirstName column. Since this is an operation that you are doing often in your application, you should consider using an index on this column. That will create a structure in the database that is sorted, if you will, by that column, so that looking up something by first name is like looking up a word in a dictionary. If you didn't have this index you might need to look at ALL rows before you determine which ones have a specific FirstName. By adding an index, you have made this fast.
So why not put an index on all columns and make them all fast? Like everything, there is a trade off. Every time you insert a row into the table User, the database will need to perform its magic and sort everything on your indexed column. This can be expensive.
You don't have to have a primary key. Indexes (of any type) are used to speed up queries and, at least with the InnoDB engine, enforce foreign key constraints. Whether you use a unique or plain (non-unique) index depends on whether you want to allow duplicate values in the key.
This is a general database concept, you might use external resources to read about it, like http://beginner-sql-tutorial.com/sql-index.htm or http://en.wikipedia.org/wiki/Index_(database)
An index allows MySQL to find data quicker. You use them on columns that you'll be using in WHERE clauses. For example, if you have a column named score, and want to find everything with where score > 5, by default this means MySQL will need to scan through the WHOLE table to find those scores. However if you use a BTREE index, finding those that meet that condition will happen a LOT faster.
Indices have a price: disk and memory space. If it's a very big table, your index will grow rather large.
Think of it this way: what are the biggest benefits of having an index in a book? It's much the same thing. You have a slightly larger book, yet you're able to quickly look things up. When you create an index on a column, you're saying you want to be able to reference it in a where clause to look it up quickly.
I've been using indexes on my MySQL databases for a while now but never properly learnt about them. Generally I put an index on any fields that I will be searching or selecting using a WHERE clause but sometimes it doesn't seem so black and white.
What are the best practices for MySQL indexes?
Example situations/dilemmas:
If a table has six columns and all of them are searchable, should I index all of them or none of them?
What are the negative performance impacts of indexing?
If I have a VARCHAR 2500 column which is searchable from parts of my site, should I index it?
You should definitely spend some time reading up on indexing, there's a lot written about it, and it's important to understand what's going on.
Broadly speaking, an index imposes an ordering on the rows of a table.
For simplicity's sake, imagine a table is just a big CSV file. Whenever a row is inserted, it's inserted at the end. So the "natural" ordering of the table is just the order in which rows were inserted.
Imagine you've got that CSV file loaded up in a very rudimentary spreadsheet application. All this spreadsheet does is display the data, and numbers the rows in sequential order.
Now imagine that you need to find all the rows that have some value "M" in the third column. Given what you have available, you have only one option. You scan the table checking the value of the third column for each row. If you've got a lot of rows, this method (a "table scan") can take a long time!
Now imagine that in addition to this table, you've got an index. This particular index is the index of values in the third column. The index lists all of the values from the third column, in some meaningful order (say, alphabetically) and for each of them, provides a list of row numbers where that value appears.
Now you have a good strategy for finding all the rows where the value of the third column is "M". For instance, you can perform a binary search! Whereas the table scan requires you to look N rows (where N is the number of rows), the binary search only requires that you look at log-n index entries, in the very worst case. Wow, that's sure a lot easier!
Of course, if you have this index, and you're adding rows to the table (at the end, since that's how our conceptual table works), you need to update the index each and every time. So you do a little more work while you're writing new rows, but you save a ton of time when you're searching for something.
So, in general, indexing creates a tradeoff between read efficiency and write efficiency. With no indexes, inserts can be very fast -- the database engine just adds a row to the table. As you add indexes, the engine must update each index while performing the insert.
On the other hand, reads become a lot faster.
Hopefully that covers your first two questions (as others have answered -- you need to find the right balance).
Your third scenario is a little more complicated. If you're using LIKE, indexing engines will typically help with your read speed up to the first "%". In other words, if you're SELECTing WHERE column LIKE 'foo%bar%', the database will use the index to find all the rows where column starts with "foo", and then need to scan that intermediate rowset to find the subset that contains "bar". SELECT ... WHERE column LIKE '%bar%' can't use the index. I hope you can see why.
Finally, you need to start thinking about indexes on more than one column. The concept is the same, and behaves similarly to the LIKE stuff -- essentially, if you have an index on (a,b,c), the engine will continue using the index from left to right as best it can. So a search on column a might use the (a,b,c) index, as would one on (a,b). However, the engine would need to do a full table scan if you were searching WHERE b=5 AND c=1)
Hopefully this helps shed a little light, but I must reiterate that you're best off spending a few hours digging around for good articles that explain these things in depth. It's also a good idea to read your particular database server's documentation. The way indices are implemented and used by query planners can vary pretty widely.
Check out presentations like More Mastering the Art of Indexing.
Update 12/2012: I have posted a new presentation of mine: How to Design Indexes, Really. I presented this in October 2012 at ZendCon in Santa Clara, and in December 2012 at Percona Live London.
Designing the best indexes is a process that has to match the queries you run in your app.
It's hard to recommend any general-purpose rules about which columns are best to index, or whether you should index all columns, no columns, which indexes should span multiple columns, etc. It depends on the queries you need to run.
Yes, there is some overhead so you shouldn't create indexes needlessly. But you should create the indexes that give benefit to the queries you need to run quickly. The overhead of an index is usually far outweighed by its benefit.
For a column that is VARCHAR(2500), you probably want to use a FULLTEXT index or a prefix index:
CREATE INDEX i ON SomeTable(longVarchar(100));
Note that a conventional index can't help if you're searching for words that may be in the middle of that long varchar. For that, use a fulltext index.
I won't repeat some of the good advice in other answers, but will add:
Compound Indices
You can create compound indices - an index that includes multiple columns. MySQL can use these from left to right. So if you have:
Table A
Id
Name
Category
Age
Description
if you have a compound index that includes Name/Category/Age in that order, these WHERE clauses would use the index:
WHERE Name='Eric' and Category='A'
WHERE Name='Eric' and Category='A' and Age > 18
but
WHERE Category='A' and Age > 18
would not use that index because everything has to be used from left to right.
Explain
Use Explain / Explain Extended to understand what indices are available to MySQL and which one it actually selects. MySQL will only use ONE key per query.
EXPLAIN EXTENDED SELECT * from Table WHERE Something='ABC'
Slow Query Log
Turn on the slow query log to see which queries are running slow.
Wide Columns
If you have a wide column where MOST of the distinction happens in the first several characters, you can use only the first N characters in your index. Example: We have a ReferenceNumber column defined as varchar(255) but 97% of the cases, the reference number is 10 characters or less. I changed the index to only look at the first 10 characters and improved performance quite a bit.
If a table has six columns and all of them are searchable, should i index all of them or none of them
Are you searching on a field by field basis or are some searches using multiple fields?
Which fields are most being searched on?
What are the field types? (Index works better on INTs than on VARCHARs for example)
Have you tried using EXPLAIN on the queries that are being run?
What are the negetive performance impacts of indexing
UPDATEs and INSERTs will be slower. There's also the extra storage space requirments, but that's usual unimportant these days.
If i have a VARCHAR 2500 column which is searchable from parts of my site, should i index it
No, unless it's UNIQUE (which means it's already indexed) or you only search for exact matches on that field (not using LIKE or mySQL's fulltext search).
Generally I put an index on any fields that i will be searching or selecting using a WHERE clause
I'd normally index the fields that are the most queried, and then INTs/BOOLEANs/ENUMs rather that fields that are VARCHARS. Don't forget, often you need to create an index on combined fields, rather than an index on an individual field. Use EXPLAIN, and check the slow log.
Load Data Efficiently: Indexes speed up retrievals but slow down inserts and deletes, as well as updates of values in indexed columns. That is, indexes slow down most operations that involve writing. This occurs because writing a row requires writing not only the data row, it requires changes to any indexes as well. The more indexes a table has, the more changes need to be made, and the greater the average performance degradation. Most tables receive many reads and few writes, but for a table with a high percentage of writes, the cost of index updating might be significant.
Avoid Indexes: If you don’t need a particular index to help queries perform better, don’t create it.
Disk Space: An index takes up disk space, and multiple indexes take up correspondingly more space. This might cause you to reach a table size limit more quickly than if there are no indexes. Avoid indexes wherever possible.
Takeaway: Don't over index
In general, indices help speedup database search, having the disadvantage of using extra disk space and slowing INSERT / UPDATE / DELETE queries. Use EXPLAIN and read the results to find out when MySQL uses your indices.
If a table has six columns and all of them are searchable, should i index all of them or none of them?
Indexing all six columns isn't always the best practice.
(a) Are you going to use any of those columns when searching for specific information?
(b) What is the selectivity of those columns (how many distinct values are there stored, in comparison to the total amount of records on the table)?
MySQL uses a cost-based optimizer, which tries to find the "cheapest" path when performing a query. And fields with low selectivity aren't good candidates.
What are the negetive performance impacts of indexing?
Already answered: extra disk space, lower performance during insert - update - delete.
If i have a VARCHAR 2500 column which is searchable from parts of my site, should i index it?
Try the FULLTEXT Index.
1/2) Indexes speed up certain select operations but they slow down other operations like insert, update and deletes. It can be a fine balance.
3) use a full text index or perhaps sphinx