I am using json npm package to update package.json file.
Using following commands
json -f package.json -I -e this.dependencies.data-version=\"1.0.0.1\"
Getting following error message
undefined:2
this.dependencies.'data-version'="1.0.0.1"
^^^^^^^^^^
SyntaxError: Unexpected string
at new Function (<anonymous>)
at main (C:\Users\SEUser2\AppData\Roaming\npm\node_modules\json\lib\json.js:
1289:27)
at Object.<anonymous> (C:\Users\SEUser2\AppData\Roaming\npm\node_modules\jso
n\lib\json.js:1683:5)
at Module._compile (module.js:569:30)
at Object.Module._extensions..js (module.js:580:10)
at Module.load (module.js:503:32)
at tryModuleLoad (module.js:466:12)
at Function.Module._load (module.js:458:3)
at Function.Module.runMain (module.js:605:10)
at startup (bootstrap_node.js:158:16)
I observer that if field name contains '-' character if creates issue.
How to run above command escaping '-' character ?
The best way I've found to update outdated packages in the package.json is to use: npm-check
npm-check -u
Which will let you interactively update the packages you want to update.
Can you try using this.dependencies['data=version'] instead
Related
I am getting the below mentioned error and I am not able to figure out how to handle it. Versions of gulp, node and npm are mentioned below. I don't know if it is node's version mismatch with that of gulp or something else but so far any help would be much appreciated.
gulp -v
CLI Version: 2.3.0
Local Version: 3.9.1
node -v
v6.10.3
npm -v
3.10.10
ERROR
C:\xampp\htdocs\ecommerce\node_modules\engine.io\build\server.js:173
async handshake(transportName, req, closeConnection) {
^^^^^^^^^
SyntaxError: Unexpected identifier
at createScript (vm.js:56:10)
at Object.runInThisContext (vm.js:97:10)
at Module._compile (module.js:542:28)
at Object.Module._extensions..js (module.js:579:10)
at Module.load (module.js:487:32)
at tryModuleLoad (module.js:446:12)
at Function.Module._load (module.js:438:3)
at Module.require (module.js:497:17)
at require (internal/module.js:20:19)
at Object.<anonymous> (C:\xampp\htdocs\ecommerce\node_modules\engine.io\build\engine.io.js:5:18)
Support for async functions was added in Node 7.6.0.
You are using Node 6.10.3.
You need to upgrade.
The oldest version of Node which is still supported (although only for a matter of weeks!) is version 12.
Upgrade to at least version 16.14.2 (the current long term support release).
install version 8.11.1 and run :
npm install
npm install gulp bower --global
npm install node-sass#latest
npm uninstall laravel-elixir
npm uninstall session
npm install --save laravel-elixir
npm install --save session
gulp
after that it will work
I am trying to install and configure STH-Comet, but I am having difficulties and I could not solve it.
I'm following the existing tutorial. And some errors occur in the process. I would like your help if possible.
After cloning the repository and entering the directory, when I run the command: npm install, two situations occur:
1- If it is not as root the errors are presented:
2 - If it is as root the errors increase, they are:
I also tried to install and configure via rpm. I do not have the above errors, but when I run ./bin/sth the following error appears.
`` `/opt/sth/node_modules/logops/lib/logops.js:27
let opts = merge({
^^^^
SyntaxError: Unexpected identifier
at Module._compile (module.js:439:25)
at Object.Module._extensions..js (module.js:474:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.require (module.js:364:17)
at require (module.js:380:17)
at Object.<anonymous> (/opt/sth/lib/sth.js:27:17)
at Module._compile (module.js:456:26)
at Object.Module._extensions..js (module.js:474:10)
at Module.load (module.js:356:32)` ``
How can I solve this?
Let me share the procedure I follow, in the case it helps.
It has been done in a CentOS 7.5.1804 system.
Asumming MongoDB is up and running in that system.
All command runs as not privileged user (i.e. I'm not root)
Node environment (installed through nvm):
$ node --version
v8.15.1
$ npm --version
6.4.1
First, download the code:
git clone https://github.com/telefonicaid/fiware-sth-comet.git
Then, install packages:
cd fiware-sth-comet
npm install
Next, edit config.js to configure STH (look STH for details about this file). I have used config.js "as is" from the repository.
Finally, run the service:
npm start
If log shows a message like this, then it has been started correctly:
time=2019-04-29T20:12:18.745Z | lvl=INFO | corr=n/a | trans=n/a | op=OPER_STH_SERVER_START | from=n/a | srv=n/a | subsrv=n/a | comp=STH | msg=Server started at http://localhost:8666
You can check it's running with a "dummy" request. For instance:
curl -H 'fiware-service: foo' -H 'fiware-servicepath: bar' 'localhost:8666/STH/v1/contextEntities/type/myType/id/myEntity/attributes/temperature?hLimit=3&hOffset=0&dateFrom=2017-10-16T00:00:00.000Z&dateTo=2017-10-26T23:59:59.999Z'
I've globally installed an NPM module like so:
sudo npm install -g contentful-space-sync
The install flags a warning, but not sure if this is an issue:
npm WARN peerDependencies The peer dependency stream-browserify#* included from bl will no
npm WARN peerDependencies longer be automatically installed to fulfill the peerDependency
npm WARN peerDependencies in npm 3+. Your application will need to depend on it explicitly.
contentful-space-sync#3.0.0 node_modules/contentful-space-sync
├── bluebird#3.1.1
├── yargs#3.31.0 (camelcase#2.0.1, window-size#0.1.4, y18n#3.2.0, decamelize#1.1.2, string-width#1.0.1, os-locale#1.4.0, cliui#3.1.0)
├── npmlog#2.0.0 (ansi#0.3.1, gauge#1.2.4, are-we-there-yet#1.0.5)
├── contentful-batch-libs#2.0.0 (contentful-management#0.7.1, contentful#1.2.1)
└── lodash#3.10.1
Install seems to work. To run the module, it's easiest to create a config file for it, which I did:
{
"sourceSpace": "xxxxxxxx",
"destinationSpace": "xxxxxxxx",
"sourceDeliveryToken": "xxxxxxxx",
"managementToken": "xxxxxxxx"
}
Now I run the module like this:
contentful-space-sync --config config.json
But I get the following error:
module.js:339
throw err;
^
Error: Cannot find module 'babel-register'
at Function.Module._resolveFilename (module.js:337:15)
at Function.Module._load (module.js:287:25)
at Module.require (module.js:366:17)
at require (module.js:385:17)
at Object.<anonymous> (/usr/local/lib/node_modules/contentful-space-sync/index.js:5:5)
at Module._compile (module.js:435:26)
at Object.Module._extensions..js (module.js:442:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:311:12)
at Module.require (module.js:366:17)
at require (module.js:385:17)
at Object.<anonymous> (/usr/local/lib/node_modules/contentful-space-sync/bin/space-sync:4:20)
at Module._compile (module.js:435:26)
at Object.Module._extensions..js (module.js:442:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:311:12)
at Function.Module.runMain (module.js:467:10)
at startup (node.js:134:18)
at node.js:961:3
I've never had something like this for a globally installed module. Why can't it find a module it needs and how do I fix this?
this was a bad release. We're aware of the issue and working on a fix.
For now the best thing is to use 2.1.9. You can install it with npm install -g contentful-space-sync#2.1.9
Having trouble running Gulp, and not quite sure what the issue is here. I've Googled the error, yet all forums that have come up haven't fixed my issue.
Here's the relevant install info:
npm -v
2.11.3
node -v
v0.12.7
node -p process.versions
{ http_parser: '2.3',
node: '0.12.7',
v8: '3.28.71.19',
uv: '1.6.1',
zlib: '1.2.8',
modules: '14',
openssl: '1.0.1p' }
node -p process.platform
darwin
node -p process.arch
x64
And the error I'm getting when executing Gulp:
Error: `libsass` bindings not found in /PATH/TO/node_modules/gulp-sass/node_modules/node-sass/vendor/darwin-x64-14/binding.node. Try reinstalling `node-sass`?
at Object.sass.getBinaryPath (/PATH/TO/node_modules/gulp-sass/node_modules/node-sass/lib/extensions.js:148:11)
at Object.<anonymous> (/PATH/TO/node_modules/gulp-sass/node_modules/node-sass/lib/index.js:16:36)
at Module._compile (module.js:460:26)
at Object.Module._extensions..js (module.js:478:10)
at Module.load (module.js:355:32)
at Function.Module._load (module.js:310:12)
at Module.require (module.js:365:17)
at require (module.js:384:17)
at Object.<anonymous> (/PATH/TO/node_modules/gulp-sass/index.js:163:21)
at Module._compile (module.js:460:26)
Kind of lost on what to do next...
Try running npm rebuild node-sass after npm install node-sass.
I installed gulp on my machine, but when i try to compile my project i have this error:
Error: Cannot find module 'del'
at Function.Module._resolveFilename (module.js:338:15)
at Function.Module._load (module.js:280:25)
at Module.require (module.js:364:17)
at require (module.js:380:17)
at Object.<anonymous> (/Applications/MAMP/htdocs/project/gulpfile.js:6:11)
at Module._compile (module.js:456:26)
at Object.Module._extensions..js (module.js:474:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.require (module.js:364:17)
I dont understand the error and i dont know how solve.
Someone can help me?
Thanks
This error message indicates that the module 'del' cannot be found. It seems that the 'del' package is not installed or not properly configured in your project.
Try installing the 'del' package by running the following command in your terminal:
npm install del --save-dev
If you have already installed 'del' package and still getting this error, try uninstalling and then reinstalling it.
npm uninstall del
npm install del --save-dev
Also make sure that you have the latest version of npm and node installed on your machine.
npm install -g npm
After installing or reinstalling 'del' package, you can try running the gulp command again and see if the error persists.