i really need little bit of help,i am new to MongoDB, is it possible to join collection and to rewrite following query to MongoDB, or if it is not possible, how can i realise this one query? Thanks
SELECT SQL_NO_CACHE
b.id,
b.id_pol AS vrsta_pola,
b.id_dxzavljanstvo AS drzavljanstvo,
o.naziv AS opstina,
bol.naziv AS bolnica,
b.id_odeljenje AS odeljenje_prijema,
b.datum_prijema,
b.id_uputna_dijagnoza AS uputna_dijagnoza,
b.id_osnovni_uzzok_hospitalizacije AS osnovni_uzrok_hospitalizacije,
b.datum_ispisa,
b.bx_dana_lezanja,
b.id_odeljenje_otpust AS odeljenje_otpust,
b.id_vrsta_otpusta,
b.id_obdukovan,
b.id_spoljni_uzzok_povrede AS spoljni_uzzok_povrede
FROM bol_rac_fl b
LEFT JOIN bolnica bol ON b.idbolnica = bol.id_bolnica
LEFT JOIN opstina o ON b.id_opstina = o.id_opstina
WHERE b.id_opstina = 70220
I read that it is not possible to join collection , and it work with lookup, but i don't understand how is possible to get similar result such as MySQL will give back after execution of this query?
Related
I have RATE and BRANCH_CURRE table. I want to perform left join operation (joining branch to rate) in Doctrine Query Language (DQL).
My SQL Query is:
SELECT r.id rid
,r.TIME rtime
,r.rate_candidate
,r.exchange_rate
,r.branch
,r.STATUS ratestatus
,bc.currency
,bc.scale bcscale
,bc.STATUS bcstatus
FROM rate r
LEFT JOIN branch_currency bc ON (
r.branch = bc.branch
AND (
r.from_currency = bc.currency
OR r.to_currency = bc.currency
)
)
WHERE r.STATUS = 1
AND bc.STATUS = 1;
To be more specific, I have two questions here
How to select some specific columns from both the tables.
How to give the multiple ON conditions while joining tables.
So Please show the DQL query using queryBuilder(). Thanx in advance!!!
I suggest to add the additional conditions into a where condition.
Other than that I highly recommend to read the documentation regarding the Doctrine QueryBuilder etc. because you're question does not show that you have any experience with Doctrine at all. Just throwing a MySQL query without any personal effort at us is not a nice and fair way.
This is not tested but should give you some guidance.
$qb = $this->_em->createQueryBuilder();
$qb->select('r.branch, bc.exchange_rate');
$qb->from('rate', 'r');
$qb->leftJoin('r.branch', 'bc');
$qb->where($qb->expr()->orX('r.from_currency=bc.currency','r.to_currency = bc.currency));
I have a SQL query that i would like to write with Magento's collection methods but i don't know how to.
I know that i have to use the getSelect() and joinLeft() methods, but don't know how to put a select inside a left join.
The query is :
SELECT
p.photo_id,
p.photo_name,
s.step_id,
s.step_name
FROM Photo p
LEFT JOIN (
SELECT
photo_id, MAX(step_id) AS max_step_id
FROM photoStep
GROUP BY photo_id
) ps
ON ps.photo_id = p.photo_id
LEFT JOIN Steps s
ON s.step_id = ps.max_step_id
I think that your best option here would be to try to avoid using the subquery. So I would start by reworking the SQL query and then use the functions groupByField & addExpressionFieldToSelect.
->groupByField('photo_id')
->addExpressionFieldToSelect("max_step_id", 'MAX({{step_id}})', 'step_id')
I have a rather big SQL statement that I am working with in MS Access 2010. Here it goes:
SELECT
W.ID AS wid,
W.wpt_ty AS ty,
W.wpt_num AS num,
W.wpt_nxt AS nxt,
W.latdeg AS lat,
W.londeg AS lon,
W.alt AS alt,
W.mission_id AS mid,
W.ctg1 AS ctg1,
W.ctg2 AS ctg2,
W.ctg3 AS ctg3,
W.ctg4 AS ctg4,
W.wpt_index AS indx,
W.vel AS vel,
W.tu AS tu,
R.route_num AS rnum,
R.AC_num AS ac,
R.route_type AS rtype,
R.LastUpdatedOn AS d8,
R.LastUpdatedBy AS auth,
R.flight_wpt_count AS wfcount,
M.mission_name AS msnName,
V.Description AS vstatus,
R.disallowed_reason_id AS did,
CW.wpt_num AS c1num,
CR.matching_route_id AS c1mrid,
CW.wpt_index AS c1indx,
CRU.runway_name AS c1rnwy,
CR.route_num AS c1rnum
FROM Validation AS V
(RIGHT JOIN Runways AS CRU
INNER JOIN (Routes CR
INNER JOIN Waypoints CW ON CR.ID = CW.route_id)
ON Runways.ID = Routes.runway_id
INNER JOIN ((Missions as M
INNER JOIN Routes AS R ON M.ID = R.mission_id)
INNER JOIN Waypoints AS W ON (R.ID = W.route_id)
AND (M.ID = W.mission_id)) ON
V.ID = R.validated
WHERE (((R.matching_route_id)=307543) AND ((R.validated) <> 0 ))
AND (((CW.mission_id)=mid) AND ((CW.wpt_num) = (ctg1))))
If you look at the bottom, you can see am I referencing the values ctg1 and mid on a Right Join while the Inner Joins reference other literal values. Eventually I will want to do the same for ctg2, ctg3, and ctg4
Right now I am running these as 2 separate queries but finding it to be way too slow. If I can join combine the queries (sort of like how I am showing here) it could speed things up greatly. But I am at a loss for how to:
Using select values earlier in said query from the Inner/Left join and push them into values needed on the Right join.
I may be using joins incorrectly, but I thought they had to do with combining data from possible the same tables, just on different pivot points.
How to use the MS Access GUI to help write a query like this.
I know this is for MS Access but I am tagging for MySQL just in case there are similar queries there which can be ported to MS Access?
Have you tried using UNION for this?
It would allow you to execute this query (As two queries, which you mentioned as a possibility), and join the results for your output.
Be warned, it will eat up (only show one of) your duplicates in the results set.
I also suggest reading up on the different types of joins for your own benefit, in the following answer:
MYSQL Joins
I've got read-only access to a MySQL database, and I need to loop through the following query about 9000 times, each time with a different $content_path_id. I'm calling this from within a PERL script that's pulling the '$content_path_id's from a file.
SELECT an.uuid FROM alf_node an WHERE an.id IN
(SELECT anp.node_id FROM alf_node_properties anp WHERE anp.long_value IN
(SELECT acd.id FROM alf_content_data acd WHERE acd.content_url_id = $content_path_id));
Written this way, it's taking forever to do each query (approximately 1 minute each). I'd really rather not wait 9000+ minutes for this to complete if I don't have to. Is there some way to speed up this query? Maybe via a join? My current SQL skills are embarrassingly rusty...
This is an equivalent query using joins. It depends what indexes are defined on the tables how this will perform.
If your Perl interface has the notion of prepared statements, you may be able to save some time by preparing once and executing with 9000 different binds.
You could also possibly save time by building one query with a big acd.content_url_id In ($content_path_id1, $content_path_id2, ...) clause
Select
an.uuid
From
alf_node an
Inner Join
alf_node_properties anp
On an.id = anp.node_id
Inner Join
alf_content_data acd
On anp.long_value = acd.id
Where
acd.content_url_id = $content_path_id
Try this extension to Laurence's solution which replaces the long list of OR's with an additional JOIN:
Select
an.uuid
From alf_node an
Join alf_node_properties anp
On an.id = anp.node_id
Join alf_content_data acd
On anp.long_value = acd.id
Join (
select "id1" as content_path_id union all
select "id2" as content_path_id union all
/* you get the idea */
select "idN" as content_path_id
) criteria
On acd.content_url_id = criteria.content_path_id
I have used SQL Server syntax above but you should be able to translate it readily.
I wonder if someone can help me. I want to replicate the following SQL query using LINQ in VB.Net.I'm a little unclear on how to do subqueries / aggregates.
Thanks
SELECT *
FROM Server S
INNER JOIN ServerHDD H
ON S.Server_ID = H.Server_ID
INNER JOIN (SELECT MAX(ServerHDD_ID) AS ServerHDD_ID
FROM ServerHDD
GROUP BY Server_ID, Letter) Filter
ON H.ServerHDD_ID = Filter.ServerHDD_ID
ORDER BY S.Hostname, H.Letter
Got this as below in C# => need VB.Net Conversion please.
from S in SERVER
join H in SERVERHDD on S.Server_ID equals H.Server_ID
join FILTER in
(from s in SERVERHDD group s
by new {s.Server_ID, s.Letter}
into groupedServerHDD select new
{
SERVERHDD_ID = groupedServer.Sum(gS=>gS.ServerHDD_ID)
}
)
on H.ServerHDD_ID equals FILTER.SERVERHDD_ID
orderby S.Hostname, H.Letter
select S
This is my most favorite page regarding this topic. I love LINQ to SQL (and wish they intended to continue support for it over Entity Framework...) http://msdn.microsoft.com/en-us/vbasic/bb688085.aspx. On this page you will find all the answers to your querying needs. It is hard to format the query here without something to test it against!
Your inner joins go away with the simple join syntax of LtS. You can either say .Max() on your inner select or Max(pseudo functoid here) like this:
From p2 In g _
Where p2.UnitPrice = g.Max(Function(p3) p3.UnitPrice) _
Select p2
There are a couple of LINQ learning tools out there that are pretty cool.
This one is my favourite... LinqPad. But you might also want to check out Linqer.
You should be able to paste your code into one of them apps and it will show you how its converted. Hope they come in handy :)