I am new to Jmeter and trying to carry out the following flows:
User Login with username and password
Page 1 is displayed with 10 invoices - User select ten invoices -
10 ajax call is executed (invoice1, invoice2,invoice3.. json file is generated with invoices as request)
Page 2 is displayed to view invoices
User log out
I have recorded the flow with blazemeter plugin on chrome.
The thread group in Jmeter has the following tasks:
I have 10 users in a file called users.txt and i am using CSV Data
set config to load them.
For each user I will load only 10 invoices from invoices.txt using
CSV Data set config to load them.
Since I have 10 users and each user needs 10 invoices, my
invoices.txt has 100 unique invoices.
Please find csv config for invoice below:
The problem is that I need each user to be assigned with 10 unique invoices and those 10 invoices cannot be allocated to another user.
Any idea how I can load 10 unique invoices for each user and make sure those invoices are not assigned again to another user?
invoices.txt should have only unique IDs before test start, you can share the IDs using:
CSV Data Set Config inside loop of users with attributes:
Sharing mode - All Threads - ID won't be repeated
Recycle on EOF? - False - for not to get invalid Id (<EOF>)
Stop thread on EOF? - True - Stop when file with unique IDs ends
You can consider using HTTP Simple Table Server instead of 2nd CSV Data Set Config.
HTTP Simple Table Server has KEEP option, given you set it to FALSE each used "invoice" will be removed, it will guarantee uniqueness even in case when you run your test in Distributed (Remote) mode
You can install HTTP Simple Table Server (as well as any other JMeter Plugin) using JMeter Plugins Manager
Related
I am new to Jmeter and doing a POC to do a load test on a web application.
What I am trying to do:
I have a total of 4 user logins(surgeons). Each Login is associated with 'n' number of patients.
I've created 2 CSV files
one with the user login and password for surgeons
another CSV file that contains the PatientName, PatientID and the Surgeon associated with that Patient like below.
PatientName,PatientId,loginName
Pa1,PID1,user1
Pa2,PID2,user1
Pa3,PID3,user1
Pa4,PID4,user1
Pa5,PID5,user2
Pa6,PID6,user2
Pa7,PID7,user3
Pa8,PID8,user4
My Scenario:
Login as User.
Navigate to Each Patient Dashboard as per their associations.
log out of the application.
My Testplan
Thread Group (4 users, Ramp up time as 1 sec, 1 loop) -csv1(with username, password )
-Login Page and Navigate to the Main page - RunTime Controller (To sustain the load of a set amount of time)
-- While Loop(to loop between the patient dashboard of the surgeon/user logged in) ---CSV2 (the data as shown above) ----Navigate to Dashboard
----Navigate to Main
-Log out of the Application
What I want to achieve:
I want to use the single thread group and run it concurrently for all the 4 users. In this process, once the user login, the user should only those patient data from the CSV which are associated.
For Ex: When the Thread1 is running with User1 login, he should only able to loop through Pa1, Pa2, Pa3, Pa4 users When the thread2 is running with User2 login, user should only read the Pa5, Pa6 data.
Like this, each user login should only pick those users as per their associations mentioned above.
Is there any way, I can use this single CSV2 file and achieve this task? so that I don't have to create n number of the thread of n numbers of logins with n number CSV files each containing the data specific to the user login.
I did try to use the _CSVread function but that will make me to create multiple files(I currently have 500 CSV files) which is not a great idea. Expecting to find a solution to have all the data in one CSV and read it based on the Column value.
Reading data from CSV file based on particular column value is not supported in JMeter, you can consider the following options:
Create separate CSV files for each surgeon and pick up the relevant file based on currently logged surgeon id/name/whatever using __CSVRead() function.
Use If Controller to choose to this or that execution branch based on the surgeon name
Use Switch Controller to choose this or that execution branch based on the surgeon name
I am new to Jmeter and doing a POC to do a load test on a web application.
What I am trying to do:
I have a total of 4 user logins(surgeons). Each Login is associated with 'n' number of patients.
I've created 2 CSV files
1. one with the user login and password for surgeons
2. another CSV file that contains the PatientName, PatientID and the Surgeon associated with that Patient like below.
PatientName,PatientId,loginName
Pa1,PID1,user1
Pa2,PID2,user1
Pa3,PID3,user1
Pa4,PID4,user1
Pa5,PID5,user2
Pa6,PID6,user2
Pa7,PID7,user3
Pa8,PID8,user4
My Scenario:
Login as User.
Navigate to Each Patient Dashboard as per their associations.
log out of the application.
My Testplan
Thread Group (4 users, Ramp up time as 1 sec, 1 loop)
-csv1(with username, password )
-Login Page and Navigate to the Main page
- RunTime Controller (To sustain the load of a set amount of time)
-- While Loop(to loop between the patient dashboard of the surgeon/user logged in)
---CSV2 (the data as shown above)
----Navigate to Dashboard
----Navigate to Main
-Log out of the Application
What I want to achieve:
I want to use the single thread group and run it concurrently for all the 4 users. In this process, once the user login, the user should only those patient data from the CSV which are associated.
For Ex:
When the Thread1 is running with User1 login, he should only able to loop through Pa1, Pa2, Pa3, Pa4 users
When the thread2 is running with User2 login, user should only read the Pa5, Pa6 data.
Like this, each user login should only pick those users as per their associations mentioned above.
Is there any way, I can use this single CSV2 file and achieve this task? so that I don't have to create n number of the thread of n numbers of logins with n number CSV files each containing the data specific to the user login.
According to JMeter Test Elements Execution Order
0. Configuration elements
Pre-Processors
Timers
Sampler
Post-Processors (unless SampleResult is null)
Assertions (unless SampleResult is null)
Listeners (unless SampleResult is null)
Being a Configuration Element CSV Data Set Config is initialized once and before anything else therefore you won't be able to use the current variable from 1st CSV Data Set Config in 2nd CSV Data Set Config.
The solution is using __CSVRead() function instead, JMeter Functions are evaluated in the place where they appear in the Test Plan so you can use any hardcoded value or JMeter Variable or another function there.
More information: How to Pick Different CSV Files at JMeter Runtime
1. CSV Data Set Config for Surgeon credentials (loginNameSurgeon & Password)
2. Login Request (take first surgeon credentials from CSV)
3. While ${__jexl3("${loginNameSurgeon}" != "${loginName}")}
a. CSV Data Set Config for patient data w.r.t surgeons (PatientName,PatientId,loginName)
b. If Controller - ${__jexl3("${loginName}" != "<EOF>")} // to check if we have any more loginName left
c. Dashboard request
d. Debug Sampler // Just to validate if the variables are in place.
4. Logout request
I am new to Talend os.
However, I received a task:
Create file delimited .csv metadata (one for Lead & Opportunity).
Move files to your repository on the AWS server (the etl_process1 login).
Create two tables sfdc_leads_reporting_raw and sfdc_opp_reporting_raw.
Load the data from the files into the tables. Ensure the data types are correctly used when creating metadata schemas & tables.
Till step 4 I am done.
Now the problem is:
How to Implement logging at the end of each job to report the number of leads (count of distinct id in leads table) and number of opportunities created (count of opportunity id) by stages (how many converted, qualified, closed won, and dead)?
Help would be appreciated.
You can get this data using global variables, in a subjob at the end of your job. Most components provide a global variable called tComponent_NB_LINE (or _NB_LINE_INSERTED for database components) that gives you the number of lines output by the component.
For instance tFileOutputDelimited_1_NB_LINE or tOracleOutput_1_NB_LINE_INSERTED.
Using these variables you can log into console or file.
Here is a simple example. If you have a tOracleOutput_1 in your job you can do:
tPostJob -- OnComponentOk -- tFixedFlowInput -- Main -- tLogRow
Inside tFixedFlowInput you retrieve the variable
(Integer)globalMap.get("tOracleOutput_1_NB_LINE_INSERTED")`.
If you need to log aggregated info, you can append a tAggregateRow to your output components, and use tSetGlobalVar to get count by certain criteria.
The following is the scenario I want to run in JMeter: I have one CSV file (file1.csv) containing 100 userIds and passwords. I have created a Thread Group containing 100 users. I want each user to read one row of userId and password from file1.csv. For this I have added a CSV File Config element. Now, I want each of these users to read dynamic CSV file (for first row of userId and password from file1.csv it should read file2.csv, for
second row of userId and password from file1.csv it should read file3.csv, for third row of userId and password from file1.csv it should read file4.csv and so on ) containing some rows. Each row contains parameters for a HTTP request.
Can anyone tell me how to do this in JMeter?
I am generating the one csv file(file1.csv) containing user name and password and other csv files(file2.csv,file3.csv,file4.csv and so on) containing some records.
The easiest solution would be adding a Counter test element or __counter() function to generate incrementing postfix for secondary CSV files on each iteration and using __CSVRead() function for extracting data from your file1.csv, file2.csv, etc.
See How to Use JMeter Functions posts series to learn more about using functions in JMeter tests
I have recorded a series of 5 HTTP requests in a thread group (say TG). The response value of a request has to be sent as a parameter in next request, and so on till the last request is made.
To send the parameter in first request, I have created a csv file with unique values (say 1,2,3,4,5).
Now I want this TG to run for all the values read from the csv file (In above case, TG should start running for value 1, then value 2, till 5).
How do I do this?
Given your CSV file looks like:
1
2
3
4
5
In the Thread Group set Loop Count to "Forever"
Add CSV Data Set Config element under the Thread Group and configure it as follows:
Filename: if file is in JMeter's bin folder - file name only. If in the other location - full path to CSV file
Variable Names: anything meaningful, i.e. parameter
Recycle on EOF - false
Stop thread on OEF - true
Sharing mode - according to your scenario
You'll get something like:
See Using CSV DATA SET CONFIG guide for more detailed explanation.
Another option is using __CSVRead() function
This method of creating individual request for each record will not be scalable for multiple records. There is another scalable solution here - Jmeter multiple executions for each record from CSV