After re-installing the server with Windows and Invantive Data Hub with MySQL drivers, I get the following error when I try to connect to Exact Online (nl):
Waarschuwing itgenuty427: Een verbinding met de database 'Exact Online\Exact Online (nl)' kon niet worden opgebouwd als gebruiker 'richardvos'.
The application 'InvantiveDataHub' can only be used in production mode with your own client ID.
Please configure api-client-id in your connection string to configure the client ID.
Before the re-install it worked fine. I can connect to MySQL from within Invantive Data Hub but not to Exact Online.
How can I configure the api-client-id?
See question on Data Access Point.
You need to configure a client ID and redirect URL in your settings.xml file:
<database order="1" creationDate="2016-04-13T09:11:03.3584276+02:00" provider="ExactOnlineAll"
connectionString="apiUrl=https://start.exactonline.be;api-client-id=MYID;apiredirecturl=https://ecotaksen.be" />
It is best to store these settings not in settings.xml, but in a settings-my-file.xml next to it which is automatically merged into the main settings.xml. And of course keep a copy somewhere on another device :-)
Related
Background on the MySQL database: it was created from a Wordpress website. As far as I know, it can only be accessed through PuTTy with the ff credentials given to me by my client who I’m making the app for:
hostname
port
my username to get into server
my password to
get into server
mysql username
mysql password
It says from multiple sites that this is the PHP syntax to connect Android to MySQL
// Connecting to mysql database
$con = mysql_connect(DB_SERVER, DB_USER, DB_PASSWORD) or die(mysql_error());
It does not work and when checked for the connection error, it shows the error “Connection timed out.” when I put credentials needed (hostname, mysql
username and password). I’m assuming it’s because I need to get into the server first (with credentials #3 and #4).
Is there a workaround to this?
EDIT:
This is only based on the assumption that I am supposed to create a PHP file (that I will place inside a Jave file in Android Studio) to connect to their database. Are there other ways to connect to a private server?
Welcome Ateshi!
It sounds like you want an android app to directly access the mysql database that holds the content of a wordpress website.
The MySQL database server is most likely not publicly available on the internet for good reasons (security), as per this answer
You have posted some PHP code. PHP usually runs on the server alongside mysql, it not usually run on android.
Here is how you usually set up something like this:
Your android app makes a web request to http://yourexampleserver.com/example.php
Inside that example.php which is on the server, you have the PHP code that then does:
connects to mysql (with local credentials)
perhaps writes to the database
perhaps queries the database
formats the results into a useful format like JSON
The results are returned to java on your android which then usually shows them in the UI etc
This whole process is usually described as building a "webservice" for the app to use.
If however, you want the database contents to be stored offline and locally on android, then you probably need to connect to the server manually, export the database and download it, and then include it in your android project.
Now I am using Tableau business intelligence tool for data visualization,i tried to connect Oracle database with tableau,at that time i got below Error'
Unable to connect to the server. Check that the server is running and that
you have access privileges to the requested database.
Oracle database error 12514: ORA-12514: TNS:listener does not currently
know of service requested in connect descriptor
Unable to connect to the Oracle server "192.176.10.145". Check that the
server is running and that you have access privileges to the requested
database.
in what mistake i did,kindly help me out ,give any suggestion to resolve this
Here is an article from tableau which suggests that the ORA-12514 error occurs when SERVICE value is incorrect.
To resolve this issue, find out what the correct SERVICE value is, open the TNSNames.ora file located in your %ORACLE_HOME%\network\admin\ folder. Refer to the steps under ORA_12154 if necessary.
First and Foremost, I know zip, zilch, nada, about VBA, access, and Advantage database Server.
I have a PC in one location that can connect and update with an Access 2010 file where every drive is mapped, e.g. \file\whatever
The advantage streamlinesql odbc dsn's were setup as such \file\whatever foxpro
Now, the PC has been moved to a new location (the company moved) and there is a vpn connection between the two locations (the data server is still located in the old location and cannot be moved), and so the new map would look like this: \xxx.xxx.xxx.xxx\file\whatever
However, Access cannot connect so that it can run its process and update the files it needs to.
I do not know the actual code to place here to help with fixing this, so answering this question with more is fine with me.
I can say that the vpn is built with sonic wall.
The first thing I would try is to connect with ARC32 (The ADS query tool), since you can then rule out ODBC and Access as the problem.
ADS has three connection types:
local
remote
internet
When you directly connect to an Advantage Database Server via TCP/IP, you want the remote connection type.
The connection type can usually be set via the ads.ini file, which also must contain the IP address and port for the ADS server:
[SETTINGS]
ADS_SERVER_TYPE=2
[MYDATABASE]
LAN_IP=10.20.1.20
LAN_PORT=6262
For more info about ADS.ini see the official documentation:
http://devzone.advantagedatabase.com/dz/webhelp/Advantage12/master_ads_ini_file_support.htm
When you try connection over ODBC maybe a complete reference of the connection options would be useful, I have written them down here:
https://stackoverflow.com/a/33544131/426242
I am trying to make the connection to a remote mysql database in CloverETL Designer (Community Version)
Documentation with examples on this subject seem fragmented so I have tried to piece the bits together but I'm not use if they are correct. I would be grateful for any suggestions or further clarification on this subject.
Here is what I have so far:
The SSL Certificate
As an alternative VPN connection the server guys passed me the raw CA certificate, which I saved as a .crt file in the conn folder of the CloverETL workspace.
CloverETL Connections
I created a new DB connection and tested it was working without SSL
In the graph window I created a simple graph
Switching to Source View I added the parameter attribute to the connection code like this:
<Connection database="MYSQL" dbURL="jdbc:mysql://hostname/database_name" id="JDBC0" jdbcSpecific="MYSQL" name="CPM" parameters="ssl=${WORKSPACE}/conn/mysql_cpm_cert.crt" password="password" type="JDBC" user="username"/>
Then I tested the connection to the database by creating new metadata from a DB table
The problem is that I don't know if the connect is now secure or not.
Here's the list of resources that I used to piece together the information:
components:bulkloaders:mysql_data_writer [CloverETL wiki]
MySQL :: MySQL 5.0 Reference Manual :: 6.3.6.3 SSL Command Options
Thanks
CPM
Your setup almost certainly does not use ssl. Both links you posted are not usable - first describes bulk loader and second connection via command line client. But what you need is to configure JDBC. So I would use http://dev.mysql.com/doc/refman/5.0/en/connector-j-reference-configuration-properties.html section "Security."
I would set:
useSSL=true
requireSSL=true
You will do that by adding items in table (Custom JDBC properties) on second tab (Advanced) of Connection Wizard. In source it should appear like "jdbc.useSSL=true jdbc.requireSSL=true" not "parameters=".
Then connection should fail, because in your default java key store is missing your certificate. It can be imported via http://docs.oracle.com/javase/1.4.2/docs/tooldocs/windows/keytool.html section "Importing Certificates"
I hope this helps.
I've developed an application using JSP, Spring Security, MySql. I deployed it on Cloudfoundry. But just war file and I binded mysql service. But I also have to configure MySQL database that consists of two tables, new user and it all in my own database. While i tested my application on localhost i prepared the database running manual scripts in MySQL command window.
Question: How can I make the same configurations in CloudFoundry? can I the same way run all commands and scripts manually or export the database somehow? if yes, how to do this. And what to write here now instead of localhost?
<property name="driverClassName" value="com.mysql.jdbc.Driver" />
<property name="url" value="jdbc:mysql://localhost:3306/security_filter" />
thank you
Caldecott (vmc tunnel) is the correct way to access your cloudoundry database (for me it works and i am using ruby 1.8): http://docs.cloudfoundry.com/tools/vmc/caldecott.html
If that does not work for you you will have to do something manually (much harder):
Create a sample jsp/servlet application that connects to a mysql database (retrieving connection string, username and password as input from user). Then it will just run the sql statement against the database ( sql statement will be also input from user)
Bundle this application in your war
Now you have to retrieve database connection string/username and password. You can retrieve them from the enviromental variable VCAP_SERVICES. Just log log it in a startup listener (eg ServletContextListener)
Deploy your war and get logs from server (vmc logs ApplicationName). Get connection string, username and password
Logon to your application and use your database application to access the database using the db info you collected in the previous step
Just note that this is very dangerous approach. Just be sure to secure this database application or after the initial import remove it from your war and redeploy the application
As a final note you can check if such a database console application already exists so that you dont have to create your own (for example grails has a nice application for this http://grails.org/plugin/dbconsole. Maybe something exists for jsp/servlets)
Hope it helps if you have no luck with the ruby problem
You would need to create a mysqldump of your database.
Once you have the mysqldump file, you then use caldecott and perform vmc tunnel to your MySQL service. After you have establish a connection with your MySQL service on Cloud Foundry, you then need to use the mysql command to manually import the mysqldump file into your service.
For how to use vmc tunnel, visit the documentation site at: http://docs.cloudfoundry.com/tools/vmc/caldecott.html