I am interested in getting memory performance counter of concurrent cuda kernels. I tried to use several nvprof options like, --metrics all and --print-gpu-trace. The output seems to indicate that kernels are not concurrent any more. And concurrent performance metrics of each kernel look almost exactly the same as those running each kernel alone. I think that these concurrent kernels ran in sequence. How could I get memory performance metrics counter of concurrent kernels, for example L2 cache?
You cannot do per-kernel profiling while having the kernels execute concurrently. You can however try the following workarounds:
Do only tracing. If you don't specify --metrics or --events, nvprof will only do a tracing run. In this case, nvprof will run the kernels concurrently, but you will only get kernel timings - not metric/event data.
If you own an NVIDIA Tesla GPU (as opposed to GeForce or Quadro), you can use the CUPTI library's cuptiSetEventCollectionMode(CUPTI_EVENT_COLLECTION_MODE_CONTINUOUS) API to sample the metrics you want while the kernels are running concurrently. However, this will only allow you to get the aggregate metric/event data in that sampling interval - which means that you will not be able to correlate this data to individual kernels. CUPTI ships with a code sample called event_sampling, that demonstrates how to use this API.
Profile the metrics/events you want, and let the kernels serialize. For some metrics/events, you may be able to simply sum up the values to estimate behavior during concurrent execution.
Related
I am trying to read performance counters with nvprof while executing two kernels concurrently.
nvprof --concurrent-kernels on --events fb_subp0_write_sectors ./myprogram
However by doing this the kernel execution seems to serialize. What I want out of this is exactly how they perform when they are running concurrently.
Is it possible at all to read performance counters when kernels are running concurrently? I do not necessarily need performance per kernel, aggregate data is perfectly fine.
I am running on a Kepler gpu with compute 3.5.
No. nvprof v7.5 and earlier does not support collection of performance counters in a way that is useful for investigating the performance of concurrent kernels. I recommend you submit a feature request through the NVIDIA developer program. This is on the teams task list. Customer feedback helps move features up on the list.
Assume I have Nvidia K40, and for some reason, I want my code only uses portion of the Cuda cores(i.e instead of using all 2880 only use 400 cores for examples), is it possible?is it logical to do this either?
In addition, is there any way to see how many cores are being using by GPU when I run my code? In other words, can we check during execution, how many cores are being used by the code, report likes "task manger" in Windows or top in Linux?
It is possible, but the concept in a way goes against fundamental best practices for cuda. Not to say it couldn't be useful for something. For example if you want to run multiple kernels on the same GPU and for some reason want to allocate some number of Streaming Multiprocessors to each kernel. Maybe this could be beneficial for L1 caching of a kernel that does not have perfect memory access patterns (I still think for 99% of cases manual shared memory methods would be better).
How you could do this, would be to access the ptx identifiers %nsmid and %smid and put a conditional on the original launching of the kernels. You would have to only have 1 block per Streaming Multiprocessor (SM) and then return each kernel based on which kernel you want on which SM's.
I would warn that this method should be reserved for very experienced cuda programmers, and only done as a last resort for performance. Also, as mentioned in my comment, I remember reading that a threadblock could migrate from one SM to another, so behavior would have to be measured before implementation and could be hardware and cuda version dependent. However, since you asked and since I do believe it is possible (though not recommended), here are some resources to accomplish what you mention.
PTS register for SM index and number of SMs...
http://docs.nvidia.com/cuda/parallel-thread-execution/#identifiers
and how to use it in a cuda kernel without writing ptx directly...
https://gist.github.com/allanmac/4751080
Not sure, whether it works with the K40, but for newer Ampere GPUs there is the MIG Multi-Instance-GPU feature to partition GPUs.
https://docs.nvidia.com/datacenter/tesla/mig-user-guide/
I don't know such methods, but would like to get to know.
As to question 2, I suppose sometimes this can be useful. When you have complicated execution graphs, many kernels, some of which can be executed in parallel, you want to load GPU fully, most effectively. But it seems on its own GPU can occupy all SMs with single blocks of one kernel. I.e. if you have a kernel with 30-blocks grid and 30 SMs, this kernel can occupy entire GPU. I believe I saw such effect. Really this kernel will be faster (maybe 1.5x against 4 256-threads blocks per SM), but this will not be effective when you have another work.
GPU can't know whether we are going to run another kernel after this one with 30 blocks or not - whether it will be more effective to spread it onto all SMs or not. So some manual way to say this should exist
As to question 3, I suppose GPU profiling tools should show this, Visual Profiler and newer Parallel Nsight and Nsight Compute. But I didn't try. This will not be Task manager, but a statistics for kernels that were executed by your program instead.
As to possibility to move thread blocks between SMs when necessary,
#ChristianSarofeen, I can't find mentions that this is possible. Quite the countrary,
Each CUDA block is executed by one streaming multiprocessor (SM) and
cannot be migrated to other SMs in GPU (except during preemption,
debugging, or CUDA dynamic parallelism).
https://developer.nvidia.com/blog/cuda-refresher-cuda-programming-model/
Although starting from some architecture there is such thing as preemption. As I remember NVidia advertised it in the following way. Let's say you made a game that run some heavy kernels (say for graphics rendering). And then something unusual happened. You need to execute some not so heavy kernel as fast as possible. With preemption you can unload somehow running kernels and execute this high priority one. This increases execution time (of this high pr. kernel) a lot.
I also found such thing:
CUDA Graphs present a new model for work submission in CUDA. A graph
is a series of operations, such as kernel launches, connected by
dependencies, which is defined separately from its execution. This
allows a graph to be defined once and then launched repeatedly.
Separating out the definition of a graph from its execution enables a
number of optimizations: first, CPU launch costs are reduced compared
to streams, because much of the setup is done in advance; second,
presenting the whole workflow to CUDA enables optimizations which
might not be possible with the piecewise work submission mechanism of
streams.
https://docs.nvidia.com/cuda/cuda-c-programming-guide/index.html#cuda-graphs
I do not believe kernels invocation take a lot of time (of course in case of a stream of kernels and if you don't await for results in between). If you call several kernels, it seems possible to send all necessary data for all kernels while the first kernel is executing on GPU. So I believe NVidia means that it runs several kernels in parallel and perform some smart load-balancing between SMs.
I have a kernel that runs on my GPU (GeForce 690) and uses a single block. It runs in about 160 microseconds. My plan is to launch 8 of these kernels separately, each of which only uses a single block, so each would run on a separate SM, and then they'd all run concurrently, hopefully in about 160 microseconds.
However, when I do that, the total time increases linearly with each kernel: 320 microseconds if I run 2 kernels, about 490 microseconds for 3 kernels, etc.
My question: Do I need to set any flag somewhere to get these kernels to run concurrently? Or do I have to do something that isn't obvious?
As #JackOLantern indicated concurrent kernels require the usage of streams, which are required for all forms of asynchronous activity scheduling on the GPU. It also requires a GPU of compute capability 2.0 or greater, generally speaking. If you do not use streams in your application, all cuda API and kernel calls will be executed sequentially, in the order in which they were issued in the code, with no overlap from one call/kernel to the next.
Rather than give a complete tutorial here, please review the concurrent kernels cuda sample that JackOlantern referenced.
Also note that actually witnessing concurrent execution can be more difficult on windows, for a variety of reasons. If you run the concurrent kernels sample, it will indicate pretty quickly if the environment you are in (OS, driver, etc.) is providing concurrent execution.
I know that NVIDIA gpus with compute capability 2.x or greater can execute u pto 16 kernels concurrently.
However, my application spawns 7 "processes" and each of these 7 processes launch CUDA kernels.
My first question is that what would be the expected behavior of these kernels. Will they execute concurrently as well or, since they are launched by different processes, they would execute sequentially.
I am confused because the CUDA C programming guide says:
"A kernel from one CUDA context cannot execute concurrently with a kernel from another CUDA context."
This brings me to my second question, what are CUDA "contexts"?
Thanks!
A CUDA context is a virtual execution space that holds the code and data owned by a host thread or process. Only one context can ever be active on a GPU with all current hardware.
So to answer your first question, if you have seven separate threads or processes all trying to establish a context and run on the same GPU simultaneously, they will be serialised and any process waiting for access to the GPU will be blocked until the owner of the running context yields. There is, to the best of my knowledge, no time slicing and the scheduling heuristics are not documented and (I would suspect) not uniform from operating system to operating system.
You would be better to launch a single worker thread holding a GPU context and use messaging from the other threads to push work onto the GPU. Alternatively there is a context migration facility available in the CUDA driver API, but that will only work with threads from the same process, and the migration mechanism has latency and host CPU overhead.
To add to the answer of #talonmies
In the newer architectures, by the use of MPS multiple processes can launch multiple kernels concurrently. So, now it is definitely possible which was not sometime before. For a detailed understanding read this article.
https://docs.nvidia.com/deploy/pdf/CUDA_Multi_Process_Service_Overview.pdf
Additionally, you can also see maximum number of concurrent kernels allowed per cuda compute capability type supported by different GPUs. Here is a link to that:
https://en.wikipedia.org/wiki/CUDA#Version_features_and_specifications
For example a GPU with cuda compute capability of 7.5 can have maximum of 128 Cuda kernels launched to it.
Do you really need to have separate threads and contexts?
I believe that best practice is a usage one context per GPU, because multiple contexts on single GPU bring a sufficient overhead.
To execute many kernels concrurrenlty you should create few CUDA streams in one CUDA context and queue each kernel into its own stream - so they will be executed concurrently, if there are enough resources for it.
If you need to make the context accessible from few CPU threads - you can use cuCtxPopCurrent(), cuCtxPushCurrent() to pass them around, but only one thread will be able to work with the context at any time.
I have an application in which I would like to share a single GPU between multiple processes. That is, each of these processes would create its own CUDA or OpenCL context, targeting the same GPU. According to the Fermi white paper[1], application-level context switching is less then 25 microseconds, but the launches are effectively serialized as they launch on the GPU -- so Fermi wouldn't work well for this. According to the Kepler white paper[2], there is something called Hyper-Q that allows for up to 32 simultaneous connections from multiple CUDA streams, MPI processes, or threads within a process.
My questions: Has anyone tried this on a Kepler GPU and verified that its kernels are run concurrently when scheduled from distinct processes? Is this just a CUDA feature, or can it also be used with OpenCL on Nvidia GPUs? Do AMD's GPUs support something similar?
[1] http://www.nvidia.com/content/PDF/fermi_white_papers/NVIDIA_Fermi_Compute_Architecture_Whitepaper.pdf
[2] http://www.nvidia.com/content/PDF/kepler/NVIDIA-Kepler-GK110-Architecture-Whitepaper.pdf
In response to the first question, NVIDIA has published some hyper-Q results in a blog here. The blog is pointing out that the developers who were porting CP2K were able to get to accelerated results more quickly because hyper-Q allowed them to use the application's MPI structure more or less as-is and run multiple ranks on a single GPU, and get higher effective GPU utilization that way. As mentioned in the comments, this (hyper-Q) feature is only available on K20 processors currently, as it is dependent on the GK110 GPU.
I've run simultaneous kernels from Fermi architecture it works wonderfully and in fact, is often the only way to get high occupancy from your hardware. I used OpenCL and you need to run a separate command queue from a separate cpu thread in order to do this. Hyper-Q is the ability to dispatch new data parallel kernels from within another kernel. This is only on Kepler.