I have installed ArcMap Desktop 10.5.1 on a new computer and have a problem. I have never experienced with any previous versions of ArcMap.
Pressing the button of the toolbar for the Editor
I can’t access the toolbar.
I also can see that the program notices that I have pressed the button by the ArcMap-window ‘flickering’ and I see the Editor-window that should open for less than a second at some occasions.
I have tried to see if it ends up hidden somewhere, but it does not seems like it.
Printscreen of the ArcMap window with the editor button
Does anyone know what can be the problem and how to handle it?
I have tried to search for answers both at the ESRI help-page, here in stackoverflow and in other broad search engines, but this doesn’t seem to be a common problem.
This problem can have many causes and there are 2 different ways to open the editor toolbar.
Try click Customize > Toolbars > Editor (I will add a pic for it)
Right-click while your mouse on the main menu. The toolbar will be open directly and check the editor. Same solution.
If you have still this problem you must see another reason for the problem.
For example, do you using a second monitor? If you using it maybe the editor toolbar coming from another monitor. Check your monitor/monitors also.
If you still have problems, please write. There is another solution.
However, I am not writing now because it will reset usage of interface.
Related
i'm struggling with the classic HTML input of type file. I was using it on my angular application and i had freeze sometimes, the whole browser became unresponsive, and the only thing that works is the scroll.
You can't click any buttons, select any text or even change tab on the browser for about 5 seconds. I tried a lot of different file type and sizes and it doesn't change any of this, it even freeze sometimes when i don't select any file in the explorer and i click the close button directly.
So I thought it was my implementation that was bad and i went to the Mozilla developper website where you have an example and I have exactly the same behaviour. I also tried to take only the HTML from the Mozilla website and put it alone on a .html file and again, same behaviour.
This does not occur 100% of the time, but I would argue that on my end it does it about 60/70 % of the times.
I tried it on chrome and Firefox (both up to date), on multiple computer (all running Windows though) and i have the same behaviour on all of them.
I don't have any error or anyting in the consoles.
I don't know what to do with this, i'm pretty sure it can't be the file's input on the whole web that are bugged, but i tried a lot of various things with always the same results. Should i report it somewhere? ( if so, where? ) Or what would you suggest to do to investigate this further?
I couldn't find anyone discussing this issue on the internet apart for this thread that had no solution, they also say in this thread that the bug is not reproducible in Edge, but i just tried and it does the same thing.
Thanks for reading me and for any help about this.
Chrome freezes for few seconds when after any use of file field.
It was because I had a shortcut in "Quick Access" menu in windows explorer. This shortcut has been linked with a folder shared by network. I've removed this shortcut and everything is good now.
Same here, I have a mapped network drive that is not responding, this make a 5 seconds delay. After unmapping the drive, no more delay. The delay is the same in firefox or chrome.
Same here, if you want to remove it, on Windows 10, click on the icon Quick access (blue star), then right click on the dead link appearing in the "Frequent folders" panel on the right panel and choose "Unpin/Remove from Quick access". There should be no error message.
Each Time I'm using this console I'm struggeling with my mouse to click on the editable line.
So two question :
Is there a way of enlarging this line so it easier to click on it ?
Is there a command to navigate to it ?
The only way to enlarge it is to create a custom theme for DevTools, enable the experiment for using custom themes, and then installing your extension. That way you can get custom CSS into the top-level DevTools scope to modify things.
You may open a bug report on the chromium issue tracker against the DevTools so the team can assess the UX to see if there is anything they should modify internally.
When I am typing in NetBeans 8.2, whether it is a HTML paragraph or something like an input field, this annoying auto-suggest feature keeps on popping up. It is really annoying when I try to press enter to start a new line as it will insert a load of code when I press enter, since 'Button' is automatically highlighted.
I've included a screenshot of the problem below...
How can I disable this autocorrect feature. I don't want to disable autoorrect for PHP or when actually setting up a HTML tag (so I want to use it in a situation like this... <input type="autocorrect displays here" />, but not when typing anything else).
Sorry if I haven't explained myself very well, I can't really think of a good way to describe my problem. Please, leave a commend if you need to know more.
Thanks :)
PS: I can't find any other answers on the internet because I don't know what this is called, since I want this specific auto-suggest to disappear, so please direct me to another answer and I'll delete this question if the answer is appropriate.
PPS: I think the palette may have something to do with it but I can't be sure.
I finally found the solution for this annoying problem:
Simply go to Tools/Palette/Code Clips and remove everything from Palette (all folders and items).
Now the problem is gone!
If you go into NetBeans > Tools > Options > Editor > Code Completion, you can check or uncheck "Auto Popup Completion Window" for whatever Languages you want.
If you move over to the Code Templates tab, you can also customize the specific autocomplete rules for each Language. That way, you can leave certain ones in that you find helpful and remove ones that you find bothersome.
Today I finally had enought of these * autocompletes in my * code.
Found my way thru Google to this question and found no comfort from the answers.
But this is how I did it:
Open Code Clips -manager (Tools > Palette > Code Clips)
Select all HTML-related and click "Remove"
Profit
Apache Netbeans 12.1.
Palette > Code Clips > Remove -- does not work.
NetBeans > Tools > Options > Editor > Code Completion > Disable "Auto popup completion window" -- does work.
In NetBeans 12, disabling the Auto Popup Completion Window option for HTML does not solve the problem when editing PHP files, the popup shows up whenever Tab is pressed in HTML portions of code.
The solution is to keep the Auto Popup Completion Window active for All Languages, then switch to the Code Templates tab, select Language: HTML, remove all templates from the list, and voilá. No more HTML popup suggestions, anywhere, ever. Only the good old PHP suggestions will remain active.
I'm trying to view the emulation panel but I can't find it anywhere. Everywhere I've looked it says to open an overrides panel to find it but that's missing too. I also can't find any helpful or new answers to my question. Pressing esc only opens up console and there's nothing in settings that seems to help. Can someone please tell me how to reach it?
Instead of emulation in the drawer Device Mode is now offered for emulating other devices. It provides many benefits over the old emulation mode, such as taking into account the meta viewport tag on render. So what you see is much closer to what you'd get in real life.
I'm using 51.0.2704.103 (64-bit) on a Mac.
Cmd-Opt-i to open console.
Click the button with three vertical dots and the very top right of the Developer Tools window.
Select: more tools > sensors:
If the console draw is not already open it will open. Either way there should now be a sensors tab next to the console tab on the console draw. Click this tab and follow your nose from there.
Note that this tab had an x by it. Hitting this will hide the sensors tab and next time you use it you will need to follow the steps above again to reinstate it.
I have wasted nearly 4 hours in fixing this.
After Babylon this time it is delta-search which makes my chrome sucks on every new tab. chrome://newtab loads: http://www2.delta-search.com/?babsrc=NT_ss_SU&mntrId=786E00E04C01EE9A&affID=121564&tsp=4987
I am not able to fix this. I have already fixed homepage, search setting and other browsers. Please help me to fix this new tab issue. I want "Most visited tab" to be there when I press new tab button.
A real solution is to reset some fields in "chrome://flags". This was the way I did last time in AVG or Babylon. I have solved my problem but I wish if someone could really give exact steps so that next time if a user gets stuck he can find it here.
:p
open google chrome, type chrome://flags/ on address bar and go to hidden configuration setting.
change following part of configuration file to disable by cliking on enable..
Enable Tab Browser Dragging Windows
Enable creating a browser window when dragging tabs. #enable-tab-browser-dragging
Disable