Related
I'm using an '&' symbol with HTML5 and UTF-8 in my site's <title>. Google shows the ampersand fine on its SERPs, as do all the browsers in their titles.
http://validator.w3.org is giving me this:
& did not start a character reference. (& probably should have been escaped as &.)
Do I really need to do &?
I'm not fussed about my pages validating for the sake of validating, but I'm curious to hear people's opinions on this and if it's important and why.
Yes. Just as the error said, in HTML, attributes are #PCDATA meaning they're parsed. This means you can use character entities in the attributes. Using & by itself is wrong and if not for lenient browsers and the fact that this is HTML not XHTML, would break the parsing. Just escape it as & and everything would be fine.
HTML5 allows you to leave it unescaped, but only when the data that follows does not look like a valid character reference. However, it's better just to escape all instances of this symbol than worry about which ones should be and which ones don't need to be.
Keep this point in mind; if you're not escaping & to &, it's bad enough for data that you create (where the code could very well be invalid), you might also not be escaping tag delimiters, which is a huge problem for user-submitted data, which could very well lead to HTML and script injection, cookie stealing and other exploits.
Please just escape your code. It will save you a lot of trouble in the future.
Validation aside, the fact remains that encoding certain characters is important to an HTML document so that it can render properly and safely as a web page.
Encoding & as & under all circumstances, for me, is an easier rule to live by, reducing the likelihood of errors and failures.
Compare the following: which is easier? Which is easier to bugger up?
Methodology 1
Write some content which includes ampersand characters.
Encode them all.
Methodology 2
(with a grain of salt, please ;) )
Write some content which includes ampersand characters.
On a case-by-case basis, look at each ampersand. Determine if:
It is isolated, and as such unambiguously an ampersand. eg. volt & amp > In that case don't bother encoding it.
It is not isolated, but you feel it is nonetheless unambiguous, as the resulting entity does not exist and will never exist since the entity list could never evolve. E.g., amp&volt >. In that case, don't bother encoding it.
It is not isolated, and ambiguous. E.g., volt& > Encode it.
??
HTML5 rules are different from HTML4. It's not required in HTML5 - unless the ampersand looks like it starts a parameter name. "©=2" is still a problem, for example, since © is the copyright symbol.
However it seems to me that it's harder work to decide to encode or not to encode depending on the following text. So the easiest path is probably to encode all the time.
I think this has turned into more of a question of "why follow the spec when browser's don't care." Here is my generalized answer:
Standards are not a "present" thing. They are a "future" thing. If we, as developers, follow web standards, then browser vendors are more likely to correctly implement those standards, and we move closer to a completely interoperable web, where CSS hacks, feature detection, and browser detection are not necessary. Where we don't have to figure out why our layouts break in a particular browser, or how to work around that.
Specifically, if HTML5 does not require using & in your specific situation, and you're using an HTML5 doctype (and also expecting your users to be using HTML5-compliant browsers), then there is no reason to do it.
Well, if it comes from user input then absolutely yes, for obvious reasons. Think if this very website didn't do it: the title of this question would show up as Do I really need to encode ‘&’ as ‘&’?
If it's just something like echo '<title>Dolce & Gabbana</title>'; then strictly speaking you don't have to. It would be better, but if you don't, no user will notice the difference.
Could you show us what your title actually is? When I submit
<!DOCTYPE html>
<html>
<title>Dolce & Gabbana</title>
<body>
<p>Am I allowed loose & mpersands?</p>
</body>
</html>
to http://validator.w3.org/ - explicitly asking it to use the experimental HTML 5 mode - it has no complaints about the &s...
In HTML, a & marks the begin of a reference, either of a character reference or of an entity reference. From that point on, the parser expects either a # denoting a character reference, or an entity name denoting an entity reference, both followed by a ;. That’s the normal behavior.
But if the reference name or just the reference opening & is followed by a white space or other delimiters like ", ', <, >, &, the ending ; and even a reference to represent a plain, & can be omitted:
<p title="&">foo & bar</p>
<p title="&">foo & bar</p>
<p title="&">foo & bar</p>
Only in these cases can the ending ; or even the reference itself be omitted (at least in HTML 4). I think HTML 5 requires the ending ;.
But the specification recommends to always use a reference like the character reference & or the entity reference & to avoid confusion:
Authors should use "&" (ASCII decimal 38) instead of "&" to avoid confusion with the beginning of a character reference (entity reference open delimiter). Authors should also use "&" in attribute values since character references are allowed within CDATA attribute values.
Update (March 2020): The W3C validator no longer complains about escaping URLs.
I was checking why image URLs need escaping and hence tried it in https://validator.w3.org. The explanation is pretty nice. It highlights that even URLs need to be escaped. [PS: I guess it will be unescaped when it's consumed since URLs need &. Can anyone clarify?]
<img alt="" src="foo?bar=qut&qux=fop" />
An entity reference was found in the document, but there is no
reference by that name defined. Often this is caused by misspelling
the reference name, unencoded ampersands, or by leaving off the
trailing semicolon (;). The most common cause of this error is
unencoded ampersands in URLs as described by the WDG in "Ampersands in
URLs". Entity references start with an ampersand (&) and end with a
semicolon (;). If you want to use a literal ampersand in your document
you must encode it as "&" (even inside URLs!). Be careful to end
entity references with a semicolon or your entity reference may get
interpreted in connection with the following text. Also keep in mind
that named entity references are case-sensitive; &Aelig; and æ
are different characters. If this error appears in some markup
generated by PHP's session handling code, this article has
explanations and solutions to your problem.
It depends on the likelihood of a semicolon ending up near your &, causing it to display something quite different.
For example, when dealing with input from users (say, if you include the user-provided subject of a forum post in your title tags), you never know where they might be putting random semicolons, and it might randomly display strange entities. So always escape in that situation.
For your own static HTML content, sure, you could skip it, but it's so trivial to include proper escaping, that there's no good reason to avoid it.
If the user passes it to you, or it will wind up in a URL, you need to escape it.
If it appears in static text on a page? All browsers will get this one right either way, and you don't worry much about it, since it will work.
Yes, you should try to serve valid code if possible.
Most browsers will silently correct this error, but there is a problem with relying on the error handling in the browsers. There is no standard for how to handle incorrect code, so it's up to each browser vendor to try to figure out what to do with each error, and the results may vary.
Some examples where browsers are likely to react differently is if you put elements inside a table but outside the table cells, or if you nest links inside each other.
For your specific example it's not likely to cause any problems, but error correction in the browser might for example cause the browser to change from standards compliant mode into quirks mode, which could make your layout break down completely.
So, you should correct errors like this in the code, if not for anything else so to keep the error list in the validator short, so that you can spot more serious problems.
A couple of years ago, we got a report that one of our web apps wasn't displaying correctly in Firefox. It turned out that the page contained a tag that looked like
<div style="..." ... style="...">
When faced with a repeated style attribute, Internet Explorer combines both of the styles, while Firefox only uses one of them, hence the different behavior. I changed the tag to
<div style="...; ..." ...>
and sure enough, it fixed the problem! The moral of the story is that browsers have more consistent handling of valid HTML than of invalid HTML. So, fix your damn markup already! (Or use HTML Tidy to fix it.)
If & is used in HTML then you should escape it.
If & is used in JavaScript strings, e.g., an alert('This & that'); or document.href, you don't need to use it.
If you're using document.write then you should use it, e.g. document.write(<p>this & that</p>).
If you're really talking about the static text
<title>Foo & Bar</title>
stored in some file on the hard disk and served directly by a server, then yes: it probably doesn't need to be escaped.
However, since there is very little HTML content nowadays that's completely static, I'll add the following disclaimer that assumes that the HTML content is generated from some other source (database content, user input, web service call result, legacy API result, ...):
If you don't escape a simple &, then chances are you also don't escape a & or a or <b> or <script src="http://attacker.com/evil.js"> or any other invalid text. That would mean that you are at best displaying your content wrongly and more likely are suspectible to XSS attacks.
In other words: when you're already checking and escaping the other more problematic cases, then there's almost no reason to leave the not-totally-broken-but-still-somewhat-fishy standalone-& unescaped.
The link has a fairly good example of when and why you may need to escape & to &
https://jsfiddle.net/vh2h7usk/1/
Interestingly, I had to escape the character in order to represent it properly in my answer here. If I were to use the built-in code sample option (from the answer panel), I can just type in & and it appears as it should. But if I were to manually use the <code></code> element, then I have to escape in order to represent it correctly :)
I'm making a cms system, where you can edit the web pages that is stored in the database(html) on the website. i'm using textarea to display the html code like this.
<textarea><?php echo($pagecontent); ?></textarea>
The problem is that, on one of the pages, there's a textarea to, and for some reason it just cuts of the rest of the code after the starts.
Here's a picture, so you might understand me better: http://i.imgur.com/QueZNEV.png
Been looking around, but i can't seem to find a solution for my problem.
Your textarea contains characters which have special meaning in HTML (<, &, etc) but you want them to be treated as data, not as special characters.
Run them through htmlspecialchars() before echoing them.
I'm using an '&' symbol with HTML5 and UTF-8 in my site's <title>. Google shows the ampersand fine on its SERPs, as do all the browsers in their titles.
http://validator.w3.org is giving me this:
& did not start a character reference. (& probably should have been escaped as &.)
Do I really need to do &?
I'm not fussed about my pages validating for the sake of validating, but I'm curious to hear people's opinions on this and if it's important and why.
Yes. Just as the error said, in HTML, attributes are #PCDATA meaning they're parsed. This means you can use character entities in the attributes. Using & by itself is wrong and if not for lenient browsers and the fact that this is HTML not XHTML, would break the parsing. Just escape it as & and everything would be fine.
HTML5 allows you to leave it unescaped, but only when the data that follows does not look like a valid character reference. However, it's better just to escape all instances of this symbol than worry about which ones should be and which ones don't need to be.
Keep this point in mind; if you're not escaping & to &, it's bad enough for data that you create (where the code could very well be invalid), you might also not be escaping tag delimiters, which is a huge problem for user-submitted data, which could very well lead to HTML and script injection, cookie stealing and other exploits.
Please just escape your code. It will save you a lot of trouble in the future.
Validation aside, the fact remains that encoding certain characters is important to an HTML document so that it can render properly and safely as a web page.
Encoding & as & under all circumstances, for me, is an easier rule to live by, reducing the likelihood of errors and failures.
Compare the following: which is easier? Which is easier to bugger up?
Methodology 1
Write some content which includes ampersand characters.
Encode them all.
Methodology 2
(with a grain of salt, please ;) )
Write some content which includes ampersand characters.
On a case-by-case basis, look at each ampersand. Determine if:
It is isolated, and as such unambiguously an ampersand. eg. volt & amp > In that case don't bother encoding it.
It is not isolated, but you feel it is nonetheless unambiguous, as the resulting entity does not exist and will never exist since the entity list could never evolve. E.g., amp&volt >. In that case, don't bother encoding it.
It is not isolated, and ambiguous. E.g., volt& > Encode it.
??
HTML5 rules are different from HTML4. It's not required in HTML5 - unless the ampersand looks like it starts a parameter name. "©=2" is still a problem, for example, since © is the copyright symbol.
However it seems to me that it's harder work to decide to encode or not to encode depending on the following text. So the easiest path is probably to encode all the time.
I think this has turned into more of a question of "why follow the spec when browser's don't care." Here is my generalized answer:
Standards are not a "present" thing. They are a "future" thing. If we, as developers, follow web standards, then browser vendors are more likely to correctly implement those standards, and we move closer to a completely interoperable web, where CSS hacks, feature detection, and browser detection are not necessary. Where we don't have to figure out why our layouts break in a particular browser, or how to work around that.
Specifically, if HTML5 does not require using & in your specific situation, and you're using an HTML5 doctype (and also expecting your users to be using HTML5-compliant browsers), then there is no reason to do it.
Well, if it comes from user input then absolutely yes, for obvious reasons. Think if this very website didn't do it: the title of this question would show up as Do I really need to encode ‘&’ as ‘&’?
If it's just something like echo '<title>Dolce & Gabbana</title>'; then strictly speaking you don't have to. It would be better, but if you don't, no user will notice the difference.
Could you show us what your title actually is? When I submit
<!DOCTYPE html>
<html>
<title>Dolce & Gabbana</title>
<body>
<p>Am I allowed loose & mpersands?</p>
</body>
</html>
to http://validator.w3.org/ - explicitly asking it to use the experimental HTML 5 mode - it has no complaints about the &s...
In HTML, a & marks the begin of a reference, either of a character reference or of an entity reference. From that point on, the parser expects either a # denoting a character reference, or an entity name denoting an entity reference, both followed by a ;. That’s the normal behavior.
But if the reference name or just the reference opening & is followed by a white space or other delimiters like ", ', <, >, &, the ending ; and even a reference to represent a plain, & can be omitted:
<p title="&">foo & bar</p>
<p title="&">foo & bar</p>
<p title="&">foo & bar</p>
Only in these cases can the ending ; or even the reference itself be omitted (at least in HTML 4). I think HTML 5 requires the ending ;.
But the specification recommends to always use a reference like the character reference & or the entity reference & to avoid confusion:
Authors should use "&" (ASCII decimal 38) instead of "&" to avoid confusion with the beginning of a character reference (entity reference open delimiter). Authors should also use "&" in attribute values since character references are allowed within CDATA attribute values.
Update (March 2020): The W3C validator no longer complains about escaping URLs.
I was checking why image URLs need escaping and hence tried it in https://validator.w3.org. The explanation is pretty nice. It highlights that even URLs need to be escaped. [PS: I guess it will be unescaped when it's consumed since URLs need &. Can anyone clarify?]
<img alt="" src="foo?bar=qut&qux=fop" />
An entity reference was found in the document, but there is no
reference by that name defined. Often this is caused by misspelling
the reference name, unencoded ampersands, or by leaving off the
trailing semicolon (;). The most common cause of this error is
unencoded ampersands in URLs as described by the WDG in "Ampersands in
URLs". Entity references start with an ampersand (&) and end with a
semicolon (;). If you want to use a literal ampersand in your document
you must encode it as "&" (even inside URLs!). Be careful to end
entity references with a semicolon or your entity reference may get
interpreted in connection with the following text. Also keep in mind
that named entity references are case-sensitive; &Aelig; and æ
are different characters. If this error appears in some markup
generated by PHP's session handling code, this article has
explanations and solutions to your problem.
It depends on the likelihood of a semicolon ending up near your &, causing it to display something quite different.
For example, when dealing with input from users (say, if you include the user-provided subject of a forum post in your title tags), you never know where they might be putting random semicolons, and it might randomly display strange entities. So always escape in that situation.
For your own static HTML content, sure, you could skip it, but it's so trivial to include proper escaping, that there's no good reason to avoid it.
If the user passes it to you, or it will wind up in a URL, you need to escape it.
If it appears in static text on a page? All browsers will get this one right either way, and you don't worry much about it, since it will work.
Yes, you should try to serve valid code if possible.
Most browsers will silently correct this error, but there is a problem with relying on the error handling in the browsers. There is no standard for how to handle incorrect code, so it's up to each browser vendor to try to figure out what to do with each error, and the results may vary.
Some examples where browsers are likely to react differently is if you put elements inside a table but outside the table cells, or if you nest links inside each other.
For your specific example it's not likely to cause any problems, but error correction in the browser might for example cause the browser to change from standards compliant mode into quirks mode, which could make your layout break down completely.
So, you should correct errors like this in the code, if not for anything else so to keep the error list in the validator short, so that you can spot more serious problems.
A couple of years ago, we got a report that one of our web apps wasn't displaying correctly in Firefox. It turned out that the page contained a tag that looked like
<div style="..." ... style="...">
When faced with a repeated style attribute, Internet Explorer combines both of the styles, while Firefox only uses one of them, hence the different behavior. I changed the tag to
<div style="...; ..." ...>
and sure enough, it fixed the problem! The moral of the story is that browsers have more consistent handling of valid HTML than of invalid HTML. So, fix your damn markup already! (Or use HTML Tidy to fix it.)
If & is used in HTML then you should escape it.
If & is used in JavaScript strings, e.g., an alert('This & that'); or document.href, you don't need to use it.
If you're using document.write then you should use it, e.g. document.write(<p>this & that</p>).
If you're really talking about the static text
<title>Foo & Bar</title>
stored in some file on the hard disk and served directly by a server, then yes: it probably doesn't need to be escaped.
However, since there is very little HTML content nowadays that's completely static, I'll add the following disclaimer that assumes that the HTML content is generated from some other source (database content, user input, web service call result, legacy API result, ...):
If you don't escape a simple &, then chances are you also don't escape a & or a or <b> or <script src="http://attacker.com/evil.js"> or any other invalid text. That would mean that you are at best displaying your content wrongly and more likely are suspectible to XSS attacks.
In other words: when you're already checking and escaping the other more problematic cases, then there's almost no reason to leave the not-totally-broken-but-still-somewhat-fishy standalone-& unescaped.
The link has a fairly good example of when and why you may need to escape & to &
https://jsfiddle.net/vh2h7usk/1/
Interestingly, I had to escape the character in order to represent it properly in my answer here. If I were to use the built-in code sample option (from the answer panel), I can just type in & and it appears as it should. But if I were to manually use the <code></code> element, then I have to escape in order to represent it correctly :)
I've got an input so the user can type either html or plain text. When the user copy & paste text from MS Word, for example, it generates a weird html. Then, when you view that topic, you can see the whole page's style is affected. I don't really know if the generated html has unclosed tags or something, but it looks like it does and thus, the style of the page is affected.
Does anybody know how to "isolate" the html of that div(or whatever the container be) from the whole page's style?
Short of showing the content in an IFRAME, you can't really do that. What I usually do in this situation is apply tag stripping logic to the content as it comes in. You really don't want to allow arbitrary HTML from a security perspective, but even if you don't care what your users input, you should be stripping out invalid HTML tags (Word has a habit of creating tags with weird namespace-looking things like o:p) and running something like Tidy over the result to ensure every tag is properly closed. There are a number of Tidy libraries for .NET out there; here's one.
Here's a quick cut-and-paste of how I've done this in the past. Note that the class implements an interface from the project I used it in, but you get the general idea.
Copying text from word can include <style> tags. The only sure way to isolate these styles is to put the input control in an <iframe>
You can either sanitize the input or display it in an IFrame.
It it were me I'd strip all but basic formatting (e.g., bold, italics) and use Tidy. That's what I end up doing, I strip and convert all the CSS styles of word into <strong>, <em>, etc.
In my web application I intend to shorten a lengthy string of HTML formatted text if it is more than 300 characters long and then display the 300 characters and a Read More link on the page.
The issue I came across is when the 300 character limit is reached inside an HTML tag, example: (look for HERE)
<a hreHERE="somewhere">link</a>
<a hre="somewhere">liHEREnk</a>
When this happens, the entire page could become ill-formatted because everything after the HERE in the previous example is removed and the HTML tag is kept open.
I thinking of using CSS to hide any overflow beyond a certain limit and create the "Read More" link if the text is beyond a certain number, but this would entail me including all the text on the page.
I've also thought about splitting the text at . to ensure that it's split at the end of a sentence, but that would mean I would include more characters than I needed.
Is there a better way to accomplish this?
Note: I have not specified a server side language because this is more of a general question, but I'm using ASP.NET/C# .
Extract the plaintext from the HTML, and display that. There are libraries (like the HTML Agility Pack for .NET) that make this easy, and it's not too hard to do it yourself with an XML parser. Trying to fix a truncated HTML snippet is a losing cause.
One option I can think of is to cut it off at 300 characters and make sure the last index of '<' is less than the last index of '>'. If it is, truncate the string right before the last instance of '>', then use a library like tidy html to fix tags that are orphaned (like the </a> in the example).
There are problems with this though. One thing being if there are 300 chars worth of nothing but HTML - your summary will be displayed as empty.
If you do not need the html to be displayed it's far easier to simply extract the plain text and use that instead.
EDIT: Added using something like tidy html for orphaned tags. Original answer only solved cutting thing mid-tag, rather than within an opening/closing tag.