i'am getting error on '{' and 'END'
CREATE PROCEDURE getLogsdata
{
#id int
}
AS
BEGIN
END
how to remove this errors
Use parenthesis () instead of curly braces {}, and include some code in your procedure.
create procedure dbo.getLogsdata (#id int) as
begin;
set nocount on;
select *
from dbo.logs
where id = #id;
end;
go
Related
I tried to make a simple procedure in MariaDB 10.2 but I encountered an issue regarding variables defining.
I am receiving (conn:107) You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '' at line 3 message when I declare a variable.
I read the MariaDB documentation and I it says that a variable is defined like this DECLARE var_name [, var_name] ... type [DEFAULT value]
Where I am wrong? I am coming from Oracle SQL and some sintax is wired for me.
I use Eclipse with MariaDB JDBC to connect on SQL.
CREATE PROCEDURE nom_jobs_insert(IN p_name varchar(100) CHARACTER SET 'utf8')
BEGIN
DECLARE counter INT DEFAULT 0;
SELECT count(*) INTO counter
FROM nom_jobs
WHERE lower(name) = lower(p_name)
IF counter = 1 THEN
INSERT INTO nom_jobs(name) VALUES (p_name);
END IF;
END;
I found the solution.
In MariaDB you have to define a delimiter before create a procedure and you need to mark where the procedure code is finished.
DELIMITER //
CREATE PROCEDURE nom_jobs_insert(IN p_name varchar(100) CHARACTER SET 'utf8')
BEGIN
DECLARE counter INT DEFAULT 0;
SELECT count(*) INTO counter
FROM nom_jobs
WHERE lower(name) = lower(p_name);
IF counter = 1 THEN
INSERT INTO nom_jobs(name) VALUES (p_name);
END IF;
END; //
You have error not in DECLARE expression, add ; after SELECT statement
Here are the clues that point to a missing DELIMITER:
near '' at line 3
Line 3 contains the first ;
When the error says near '', the parser thinks it has run off the end of the "statement".
Put those together -- it thinks that there is one 3-line statement ending with ;. But the CREATE PROCEDURE should be longer than that.
CREATE PROCEDURE nom_jobs_insert(IN p_name varchar(100) CHARACTER SET 'utf8')
IS
DECLARE counter INTEGER DEFAULT 0;
BEGIN
SELECT count(*) INTO counter
FROM nom_jobs
WHERE lower(name) = lower(p_name)
IF counter = 1 THEN
INSERT INTO nom_jobs(name) VALUES (p_name);
END IF;
END;
I'm using sybase powerbilder12 IDE and mySQL.
I have a stored procedure like this:
DELIMITER //
CREATE PROCEDURE CRTempTable(IN loc_code CHAR(6))
BEGIN
create temporary table mstparameter (select * from mstparameter_consolidate where location_code = 'loc_code');
END//
DELIMITER ;
I'm calling it in the powerbuilder12 like this:
DECLARE TempTBCRCall PROCEDURE FOR TempTableCR
location_code = :gs_location_code_mstparameter ;
execute TempTBCRCall;
It gives me the error :
Stored procedure execution failure1054 SQLSTATE = S0022
[MySQL][ODBC 5.2(a) Driver][mysqld-5.5.25a]Unknown column
'location_code' in 'field list'... Error Code 0
but location_code is there in my mstparameter_consolidate table.
If I set to enter the location_code manually it works fine.
This is an example that works, I hope it helps you.
DECLARE pb_acceso_usuario PROCEDURE FOR SP_ACCESO_VALIDA_DATOS_USUARIO (:gs_cod_usuario,:ls_password);
execute pb_acceso_usuario;
if SQLCA.sqlcode = 0 then
FETCH pb_acceso_usuario INTO :ln_count,:gs_des_usuario,:ls_estado;
CLOSE pb_acceso_usuario;
end if
try putting "table-name." in front of the column-name.
I am a newbie to mysql, I and I have written a stored procedure in which I am always getting syntax errors , I am using SQL Workbench 6.0, Could some one please help know what am I doing wrong.
CREATE DEFINER=`root`#`localhost` PROCEDURE `loginAuthentication`(IN user_name VARCHAR(45),IN pass VARCHAR(45),OUT returnvalue INT)
BEGIN
DECLARE no_of_records INT; (Syntax Error on this Line)
SELECT COUNT(*) INTO no_of_records
FROM tablename.registration
WHERE tablename.registration.user_name=user_name AND tablename.registration.pass=pass;
IF no_of_records = 1 THEN (Syntax Error on this Line)
SET returnvalue = 1;
END IF; (Syntax Error on this Line)
END; (Syntax Error on this Line)
You have to change the delimiter. Otherwise MySQL thinks that your procedure ends after the very first ;
Write it like this:
DELIMITER $$
CREATE DEFINER=`root`#`localhost` PROCEDURE `loginAuthentication`(IN user_name VARCHAR(45),IN pass VARCHAR(45),OUT returnvalue INT)
BEGIN
DECLARE no_of_records INT;
SELECT COUNT(*) INTO no_of_records
FROM tablename.registration
WHERE tablename.registration.user_name=user_name AND tablename.registration.pass=pass;
IF no_of_records = 1 THEN
SET returnvalue = 1;
END IF;
END $$
DELIMITER ;
And btw, Workbench has nothing to do with it. It's just a client to MySQL.
Trying to create the following routine in MySQL Workbench yields a "This object's DDL statement contains syntax errors. Are you sure you want to apply the DDL statement unchanged?":
-- --------------------------------------------------------------------------------
-- Routine DDL
-- Note: comments before and after the routine body will not be stored by the server
-- --------------------------------------------------------------------------------
DELIMITER $$
CREATE PROCEDURE `dbName`.`testFunc` ()
BEGIN
SET i = CAST(100 AS DOUBLE);
END
Any ideas?
This does the same thing:
-- --------------------------------------------------------------------------------
-- Routine DDL
-- Note: comments before and after the routine body will not be stored by the server
-- --------------------------------------------------------------------------------
DELIMITER $$
CREATE PROCEDURE `rateGenius`.`testFunc` ()
BEGIN
SET i = CONVERT(100, DOUBLE);
END
You need to declare i in your stored procedure.
DELIMITER $$
CREATE PROCEDURE `rateGenius`.`testFunc` ()
BEGIN
DECLARE i DOUBLE
SET i = 100.0;
END
Not sure what you're actually trying to do with this stored proc though. Your CAST/CONVERT is unecessary in this case but your syntax for those functions is in fact correct.
I am trying to create a mysql stored procedure, but I get this error:
Script line: 2 Failed to CREATE PROCEDURE proc_test_bideep
The stored procedure code is:
DELIMITER $$
DROP PROCEDURE IF EXISTS `commun`.`insert_categorie` $$
CREATE PROCEDURE `commun`.`insert_categorie` (id_mere INT,
lib_categ VARCHAR(50),
id_categ_sup INT ,
categ_authInstantBuy INT)
BEGIN
SET #bg_mere := (SELECT categ_bg FROM categ_basic WHERE categ_id = id_mere);
#bg_mere+2,categ_level_bideep,categ_statut,categ_adult,categ_authSmallBid,categ_authBid,categ_authInstantBuy);
SELECT '1' AS code_retour; END IF;
ecetera.........
END $$
DELIMITER ;
a) You need to DECLARE any variables on the first lines of the procedure, including their datatype:
DECLARE bg_mere INT;
b) To fetch a value from the database into a variable, you use SELECT ... INTO syntax:
SELECT categ_bg INTO bg_mere FROM categ_basic WHERE categ_basic.categ_id = id_mere;
c) You have an END IF without the corresponding IF.
d) The closing END needs a semicolon (not BEGIN though), only then do you need a delimiter to finish the entire statement, and finally you should reset the delimiter back to normal:
BEGIN
# body of the stored procedure goes here
END;
$$
DELIMITER ;
Your parameters are missing the keyword IN such as: ...(IN id_mere INT, IN lib_categ ...). Also, you need to configure your OUT variable for #bg_mere in the initial parameter list such as (IN xxx, ..., OUT bg_mere VARCHAR/INT/WHATEVER).