I can't access internet through my chrome browser,but can access net through all other browsers in the same system. Tried uninstalling and installing chrome but of no use...Is there any solution for this ?
this is the issue....
Since you have already uninstalled it let's start here:
Step 1: Enable the Hidden Files View.
To do that go to:
Start > Control Panel > Folder Options.
Click the View tab.
Click/Check the Show hidden files, folders, and drives option.
Uncheck the Hide protected operating system files option.
Press OK.
Step 2: Delete any Chrome or Google folders from your computer.
Navigate to the following locations and delete the Chrome folder(s). You can also choose to rename them. I would also search you computer for any google or chrome folder to make sure.
C:\Users\<YourUserName>\AppData\Local\Google\Chrome
C:\Program Files\Google\Chrome
Step 3: Schedule a check disk
To do this use:
chkdsk c: /r
where 'c' is the drive with chrome installed. You can add other drives as well just in case you had multiple installations. To do this basically replace c with the drive letter.
Step 5: Reboot PC and reinstall chrome.
Optional Step: if the above still fails. Download CCleaner. Restart in safe mode with networking. Repeat the above steps but run CCleaner as the final step.
What you need to do is check if there is a proxy turned on system-wide or even in chrome, turn it off. type that "chrome://settings" in your URL bar of chrome: and search for proxy
Related
I've written an extension for Google Chrome that will be released with the next version of our product. I want to understand what properties, paths for extraction, registry entries, etc. should I provide the installer of my product so that the end user doesn't have to install the extension on their own manually, and the installer does the complete job of installing the extension, and also notifies the user that the extension has been installed. As of now, the code that I have written is placed in a folder, and I use the "Load Unpackaged Extension" to load the extension. What should I do to achieve the aforementioned task?
Google's current policy on installing extensions via the registry (for Windows machines) is this:
Only extensions from the Google Extension Gallery (or Chrome Web Store - CWS) can be installed via the registry.
See this link - https://developer.chrome.com/extensions/external_extensions - for information on how this can be done. Keep in mind the following:
-This technique will still pop-up a msgbox to the user. its not completely silent.
-When using this technique, if the user subsequently removes the extension from her Chrome, the extension gets "blacklisted" on that chrome and will not re-auto-install until the user re-install it
manually. refer to Auto-installing a google chrome extension won't work ! for details.
Chrome has a couple ways of installing extensions programmatically:
http://www.chromium.org/administrators/pre-installed-extensions
Edit: yes, this policy has changed by now, as FuzzyAmi points out.
If you're using GNU/Linux, this is how you pre-install an extension from the chrome web store for all users:
/etc/chromium/policies/managed/yourextension_policy.json
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
{
"ExtensionInstallForcelist": [
"yourextensionuniqueidentifiersup;https://clients2.google.com/service/update2/crx",
"yourextensionuniqueidentifiersup"
]
}
Reference
metamask-chrome - AUR
How do I disable Google Chrome extension autoupdate?
Solutions I've found for this:
1. Disabling a concrete extension update
That's what I wanted!
You can do this by editing the extension's manifest.json file:
On Windows: C:\Users\<USERNAME>\AppData\Local\Google\Chrome\User Data\Default\Extensions\<EXTENSION-ID>\<VERSION>\manifest.json (find out the extension's ID by enabling Developer Mode in the extension settings page)
On MacOS: Open /Users/USERNAME/Library/Application Support/Google/Chrome/Default/Extensions/EXTENSION-ID/VERSION/manifest.json in a text editor.
On Ubuntu for Chromium: ${HOME}/.config/chromium/Default/Preferences
In this file, set the "update_url" property to something invalid like "https://localhost" for example. For the given url, it makes auto-updating that extension as simply impossible.
Source: https://productforums.google.com/d/msg/chrome/l3zOZeO-5-M/Y7VaR0KCWNIJ
2. Disabling all Google Chrome extension updates
For any OS: Just type chrome://plugins/ at address bar and turn Google Update plugin off. Source: How to disable Google Chrome auto update?
For Windows OS: Set Registry values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Google\Update]
"AutoUpdateCheckPeriodMinutes"=dword:00000000
"UpdateDefault"=dword:00000000
Source: Making Google Chrome leave itself alone
If the chrome extension is on Github (which many if not most of them are), you can simply:
(1.) clone the Github repo,
(2.) reset the head to the version that you want, and
(3.) enable Developer Mode at chrome://extensions/
(4.) select the "Load unpacked" option from chrome://extensions/, and then select the folder enclosing the source code for the extension.
I recently used this technique to downgrade my version of Reddit Link Opener, which no longer supports users who have opted out of using that site's redesign. This worked for me on MacOS, but should work on all platforms.
If the extension is loaded as an unpacked extension (in the manner described above), it will NOT auto-update to a newer version.
Disabling update for a specific extension:
This can be achieved with the system policies, (more details here)
For Linux :
Get the installed extensions list (IDs), this can be found with ls -l ~/.config/google-chrome/Default/Extensions or chrome://extensions
Create the necessary directory if not present mkdir -p /etc/opt/chrome/policies/managed (with root)
Create the needed file policies file touch /etc/opt/chrome/policies/managed/google-chrome.json
Edit that file with the code bellow
open the page chrome://policy/ and reload the policies
{
"ExtensionSettings": {
"ghijklmnopabcdefghijklmnopabcdef": {
"update_url": "https://127.0.0.1/update_url",
"override_update_url": true
},
"YOUR-EXTENSION-ID-LIKE-THE-PREVIOUS-EXAMPLE": {
"update_url": "https://127.0.0.1/update_url",
"override_update_url": true
}
}
}
Note: this can not be applied widely to all extensions in a single rule and also for each newly installed extension the file need to be updated
Hi all those solitions for me have one disadvantage is that all extensions have no updates, I needed to stop only for one extension in this case and wanted al the other to keep making updates.
I think I found the solutuion for windows
Go to
C:\Users\YOUR_NAME_HERE\AppData\Local\Google\Chrome\User Data\Default\Extensions\YOUR_FOLDER APP HERE\
In that folder app click in properties and select read only an aplly that to all subfolders and files... for now for me solved the problem !!!
Regards xichas
this is a complementary answer to the accepted one https://stackoverflow.com/a/27657703/1422630 , allowing disable all at once on chromium
this is also only for linux (may be run on windows thru cygwin tho, not tested..)
this script will
backup the prefs file,
modify it,
if didnt succeed will output "FAILED"
show the differences using meld if installed
#!/bin/bash
set -ue
strPref="$HOME/.config/chromium/Default/Preferences"
cat "$strPref" |egrep "\"update_url[^,]*," -o |sort -u
read -p "existing unique urls above..." -n 1
strBkp="${strPref}.`date +"%Y%m%d%H%M%S"`.bkp"
if cp -v "$strPref" "$strBkp";then
strUpdUrl="clients2.google.com/service/update2/crx" #change this if needed #TODO should match any URL...
sed -i -r "s#(update_url\":\"https{,1}://)(${strUpdUrl})#\1127.0.0.1#g" "$strPref"
if grep "$strUpdUrl" "$strPref";then echo FAILED >&2;exit 1;fi
cmdDiff=colordiff
if which meld;then cmdDiff=meld;fi
#$cmdDiff <(cat "$strPref" |egrep "\"update_url[^,]*," -o) <(cat "$strBkp" |egrep "\"update_url[^,]*," -o)
$cmdDiff <(cat "$strPref" |sed -r 's#","#",\n"#g') <(cat "$strBkp" |sed -r 's#","#",\n"#g')
fi
tested on chromium: Version 63.0.3239.84 (Official Build) Built on Ubuntu , running on Ubuntu 16.04 (64-bit)
obs.: that script also works for google-chrome, just change the preferences file path
After updating Google Chrome to v60, no solution found on the Internet has helped me
So i just blocked IP addresses, used for updating, by doing following steps:
Opened Chrome with blank browser tab
Waited, until extension
autoupdate begins, by looking on to network tab in Resource
Monitor
Wrote out all the IP addresses with high download rate. My IP address list was:
64.233.161.94
64.233.161.102
64.233.163.95
74.125.238.132
108.177.14.138
173.194.73.132
173.194.222.102
216.58.209.110
216.58.209.97
173.194.222.99
173.194.32.227
173.194.113.172
173.194.32.224
195.216.237.77
74.125.232.170
143.215.130.61
74.125.238.147
173.194.122.137
173.194.44.66
173.194.44.67
173.194.44.95
173.194.122.136
74.125.232.183
74.125.232.171
Created outbound rule for chrome.exe in Windows Firewall and added listed IP addresses to blocklist
After I enabled this rule, chrome was unable to update my extensions.
Just (re)install the extension via Load unpacked.
Let's suppose "Roboform Password Manager" extension version 8.6.5.5 dropped some important functionality, so you want to keep version 8.6.2.2 installed.
Go to chrome://extensions/
Enable Developer mode
Get the required version of the plugin:
If Chrome still got the version you need:
Utilize Pack extension button on the plugin details page.
Just copy the extension folder, e.g. C:\Users\%USERNAME%\AppData\Local\Google\Chrome\User Data\Default\Extensions\pnlccmojcmeohlpggmfnbbiapkmbliob. The extension id is visible in the url bar, on the plugin details page, e.g. chrome://extensions/?id=pnlccmojcmeohlpggmfnbbiapkmbliob.
If the version you need was overwritten already:
Get appropriate ".crx" from some extensions archive
Look for ".crx" in "C:\Program Files\..." (applications/installers sometimes bundle original ".crx" versions, unaffected by any updates)
Unzip (e.g. with 7-zip) your ".crx" (or paste the extension folder contents) to a non-temporary folder - you would have to keep those files in place until you uninstall the extension.
Click Load unpacked, select that folder.
If you just drag&drop the ".crx" file, Chrome extension details would show Source=Chrome Web Store, and it would get updated as soon as you click Update extensions now. But for an unpacked extension, you get a special "Unpacked extension" overlay icon, Source=Unpacked extension and it won't get updated.
Just tested on Chrome 79.0.3945.88 (64-bit), Windows.
Now, Chrome shows "Disable developer mode extensions" popup on each startup. Personally, I just manually dismiss them each time. I do not re-start Chrome too often.
I'm trying to add the Rapid Interface Builder extension to chrome using the rib.crx file I downloaded from https://01.org/rapid-interface-builder/downloads/2012/rib-preview-1-chrome-extension
Unfortunately, every time I open the crx file with chrome I get the following error:
Apps, Extensions and scripts cannot be added from this website.
Any ideas on how to fix this?
Instead of opening the file, you have to: extract it (crx are zip files), then visit chrome://extensions, enable developer mode, and load unpacked extension.
The reason for this is: lots of people try to abuse chrome apps/extensions to install nasty applications to your browser. So Chrome tries to make it impossible to automatically side-load these apps without you making sure that is really what you want to do.
So.. typical caveats of installing software apply when using this approach.
You can now also just drag-and-drop the .crx file onto the chrome://extensions page and it will install, too.
Edit 2019-01-10: Make sure to enable Developer mode for extensions. If this was not enabled, refresh the chrome://extensions page after enabling it.
Edit 2018-08-24: This works on Windows, too.
Edit:
This doesn't work on Windows. Verified on OSX and ChromeOS. From what I've read, this will work on Linux, too.~
(I initially experienced the same problem you described.*)
This solution worked for me in Windows 10 (build th1511) x64:
Open Chrome as you normally would.
Go to the "Extensions" page (chrome://extensions; or click Menu button at top right corner → From 'More tools' drop down menu select 'Extensions').
Drag and drop the .crx file onto the extensions page in Chrome -onto the list of extensions.
You should see a dialog stating "Drop here to install". This must be present. (If you do NOT see this, reposition your mouse - it may be too far to the side of the page.)
It should load successfully and you should see the extension in the list immediately afterward.
*I received the same error you described when attempting to load the .crx file (packed extension) by right-clicking/double-clicking it and selecting "Open With" "Chrome", and by dragging/dropping the file onto a regular webpage in Chrome.
In the Extensions page, just enable Developer mode. From there you can drag and drop any .crx file there and installation prompt will follow suit.
Open Chrome with this parameter --enable-easy-off-store-extension-install, then go to extensions and enable Developer mode. Now you can install .crx files without any problem.
go on extension, and your first step is on developer mode, 2 step update extensions, and last drop IDM extension file on google chrome.
I found the new change that you can't install Chrome extensions/userscripts without saving them and dragging them into Chrome quite annoying. As such I have set forth to revert this to the old way it was.
I read the documentation here: http://www.chromium.org/administrators/policy-list-3#ExtensionInstallSources that says to add a registry key and so I have done, as shown below. However when attempting to install an extension I still get an error that they can only be installed from the Chrome webstore. Did I add the registry entries wrong or something?
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Google\Chrome\ExtensionInstallSources]
"1"="http://*"
"2"="https://*"
This answer is obsolete as of Chrome 36
Instead of editing the registry, you can also make Chrome to behave in the old way via the --enable-easy-off-store-extension-install flag.
Under Windows, create a shortcut to your Chrome executable. Then edit the shortcut, and append --enable-easy-off-store-extension-install to "Target". See the screenshot below:
Some observations:
I've added the --enable-easy-off-store-extension-install flag after chrome.exe.
After starting Chrome, I visited a website that links to a .crx file that is not hosted in the Chrome web store.
Because of the flag, Chrome 20 doesn't show the "Extensions, apps, and user scripts can only be added from the Chrome Web Store" message any more. Instead (see bottom), Chrome asks me whether it's OK to install the extension - exactely as before.
This command line switch also works for Chromium/Chrome, under Linux and OSX.
If you ever find yourself in the situation where the --enable-easy-off-store-extension-install flag doesn't work (e.g. future version?) or you don't want to use it, then there is an alternative method.
You can install extensions with a plain vanilla install of Chrome by dragging .CRX extension files onto the Extensions panel in Settings.
I've written an extension for Google Chrome that will be released with the next version of our product. I want to understand what properties, paths for extraction, registry entries, etc. should I provide the installer of my product so that the end user doesn't have to install the extension on their own manually, and the installer does the complete job of installing the extension, and also notifies the user that the extension has been installed. As of now, the code that I have written is placed in a folder, and I use the "Load Unpackaged Extension" to load the extension. What should I do to achieve the aforementioned task?
Google's current policy on installing extensions via the registry (for Windows machines) is this:
Only extensions from the Google Extension Gallery (or Chrome Web Store - CWS) can be installed via the registry.
See this link - https://developer.chrome.com/extensions/external_extensions - for information on how this can be done. Keep in mind the following:
-This technique will still pop-up a msgbox to the user. its not completely silent.
-When using this technique, if the user subsequently removes the extension from her Chrome, the extension gets "blacklisted" on that chrome and will not re-auto-install until the user re-install it
manually. refer to Auto-installing a google chrome extension won't work ! for details.
Chrome has a couple ways of installing extensions programmatically:
http://www.chromium.org/administrators/pre-installed-extensions
Edit: yes, this policy has changed by now, as FuzzyAmi points out.
If you're using GNU/Linux, this is how you pre-install an extension from the chrome web store for all users:
/etc/chromium/policies/managed/yourextension_policy.json
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
{
"ExtensionInstallForcelist": [
"yourextensionuniqueidentifiersup;https://clients2.google.com/service/update2/crx",
"yourextensionuniqueidentifiersup"
]
}
Reference
metamask-chrome - AUR