Is there a way to selectively disable clang-tidy warnings. For example, I have readability-identifier-naming checks enabled, and also display warnings inside header through header-filter. All methods are checked if they are in CamelCase. However, there are occasionally classes that are to be drop-in replacement of another STD class or Boost class and thus they have the lower case naming convention. In this case, clang-tidy emits a lot of warnings. Is there a way to disable them for specific segment of codes. Similar to the effect of // clang-format off and // clang-format on for clang-format.
There are several ways to do this:
// NOLINT at the end of line you want to skip.
// NOLINTNEXTLINE(readability-identifier-naming) before that line to skip only "readability-identifier-naming" checks.
Run clang-tidy with parameter
-line-filter='[{"name":"myprog.cpp","lines":[[1,99],[101,200]]}]'
Line 100 will be skipped in this example.
The third way allows to skip more than one line, but is inconvenient when the source file is frequently changing (you'll need to change line numbers every time you modify the source).
Possible duplicate of this question.
Related
Quite confused about this one:
$ tclsh
% string is double {}
1
Why would tcl consider an empty string to be a valid double?
Summary: It's a bit of a misdesign and was a place where the initial use-case was the wrong one, but we can't change it in 8.* (I'm not sure about Tcl 9.0; we still want to avoid gratuitous changes there).
The string is command was originally designed to support the Tk entry widget's validation options. These let the widget respond to typing (or focus changs) by checking whether the change made the widget be in a valid state, such as holding a integer. If you wanted that, you'd just do this:
entry $w -validate key -vcmd {string is integer %P} -invcmd {bell}
Then, if you pressed a letter key, say A, with the cursor in the middle of an integer, the edit would be rejected and the system would make a warning noise. Really easy.
There's only one slight problem. If you had selected all the text in the entry and the pressed a digit, the edit would also be rejected (if string is was strict by default). The problem is that there's an intermediate transition state in the edit where the old text is deleted but before the new text is inserted: the validation occurs twice in such a situation, once for the delete and once for the insert. (It has to be that way because of the way things are tied together under the hood.) That's a terrible user experience, so string is was made lax by default so that this use case would work.
It's not a decision I agreed with — it should have been the other way round, with you needing to request laxity in the test if you want it, which would have added very little overhead here while allowing other uses to be saner — but I was just an ordinary user at that point. I prefer to use a multi-stage validation in my forms, such as using keypress level validation as a soft validation that allows bad input while the user is part-way through using the form, and just indicates that it knows that problems exist anyway, via techniques such as adjusting background colours and disabling submit buttons. (But that's off-topic for your question…)
Library command design is tricky. It takes careful consideration of use-cases to get right. Sometimes we fail.
The problem originated in code that was external to Tcl and Tk in about the time of Tcl 8.1.0. Most of the patch that introduced this was very good (it also gave us commands such as string equal and string map) but this was an aspect that could have done with a little more cooking.
First, here the way i'm calling the function :
eval([functionName '(''stringArg'')']); % functionName = 'someStringForTheFunctionName'
Now, I have two functionName functions in my path, one that take the stringArg and another one that takes something else. I'm getting some errors because right now the first one it finds is the function that doesn't take the stringArg. Considering the way i'm calling the functionName function, how is it possible to call the correct function?
Edit:
I tried the function which :
which -all someStringForTheFunctionName
The result :
C:\........\x\someStringForTheFunctionName
C:\........\y\someStringForTheFunctionName % Shadowed
The shadowed function is the one i want to call.
Function names must be unique in MATLAB. If they are not, so there are duplicate names, then MATLAB uses the first one it finds on your search path.
Having said that, there are a few options open to you.
Option 1. Use # directories, putting each version in a separate directory. Essentially you are using the ability of MATLAB to apply a function to specific classes. So, you might set up a pair of directories:
#char
#double
Put your copies of myfun.m in the respective directories. Now when MATLAB sees a double input to myfun, it will direct the call to the double version. When MATLAB gets char input, it goes to the char version.
BE CAREFUL. Do not put these # directories explicitly on your search path. DO put them INSIDE a directory that is on your search path.
A problem with this scheme is if you call the function with a SINGLE precision input, MATLAB will probably have a fit, so you would need separate versions for single, uint8, int8, int32, etc. You cannot just have one version for all numeric types.
Option 2. Have only one version of the function, that tests the first argument to see if it is numeric or char, then branches to perform either task as appropriate. Both pieces of code will most simply be in one file then. The simple scheme will have subfunctions or nested functions to do the work.
Option 3. Name the functions differently. Hey, its not the end of the world.
Option 4: As Shaun points out, one can simply change the current directory. MATLAB always looks first in your current directory, so it will find the function in that directory as needed. One problem is this is time consuming. Any time you touch a directory, things slow down, because there is now disk input needed.
The worst part of changing directories is in how you use MATLAB. It is (IMHO) a poor programming style to force the user to always be in a specific directory based on what code inputs they wish to run. Better is a data driven scheme. If you will be reading in or writing out data, then be in THAT directory. Use the MATLAB search path to categorize all of your functions, as functions tend not to change much. This is a far cleaner way to work than requiring the user to migrate to specific directories based on how they will be calling a given function.
Personally, I'd tend to suggest option 2 as the best. It is clean. It has only ONE main function that you need to work with. If you want to keep the functions district, put them as separate nested or sub functions inside the main function body. Inside of course, they will have distinct names, based on how they are driven.
OK, so a messy answer, but it should do it. My test function was 'echo'
funcstr='echo'; % string representation of function
Fs=which('-all',funcstr);
for v=1:length(Fs)
if (strcmp(Fs{v}(end-1:end),'.m')) % Don''t move built-ins, they will be shadowed anyway
movefile(Fs{v},[Fs{v} '_BK']);
end
end
for v=1:length(Fs)
if (strcmp(Fs{v}(end-1:end),'.m'))
movefile([Fs{v} '_BK'],Fs{v});
end
try
eval([funcstr '(''stringArg'')']);
break;
catch
if (strcmp(Fs{v}(end-1:end),'.m'))
movefile(Fs{v},[Fs{v} '_BK']);
end
end
end
for w=1:v
if (strcmp(Fs{v}(end-1:end),'.m'))
movefile([Fs{v} '_BK'],Fs{v});
end
end
You can also create a function handle for the shadowed function. The problem is that the first function is higher on the matlab path, but you can circumvent that by (temporarily) changing the current directory.
Although it is not nice imo to change that current directory (actually I'd rather never change it while executing code), it will solve the problem quite easily; especially if you use it in the configuration part of your function with a persistent function handle:
function outputpars = myMainExecFunction(inputpars)
% configuration
persistent shadowfun;
if isempty(shadowfun)
funpath1 = 'C:\........\x\fun';
funpath2 = 'C:\........\y\fun'; % Shadowed
curcd = cd;
cd(funpath2);
shadowfun = #fun;
cd(curcd); % and go back to the original cd
end
outputpars{1} = shadowfun(inputpars); % will use the shadowed function
oupputpars{2} = fun(inputparts); % will use the function highest on the matlab path
end
This problem was also discussed here as a possible solution to this problem.
I believe it actually is the only way to overload a builtin function outside the source directory of the overloading function (eg. you want to run your own sum.m in a directory other than where your sum.m is located.)
EDIT: Old answer no longer good
The run command won't work because its a function, not a script.
Instead, your best approach would be honestly just figure out which of the functions need to be run, get the current dir, change it to the one your function is in, run it, and then change back to your start dir.
This approach, while not perfect, seems MUCH easier to code, to read, and less prone to breaking. And it requires no changing of names or creating extra files or function handles.
What does backpatching mean ? Please illustrate with a simple example.
Back patching usually refers to the process of resolving forward branches that have been planted in the code, e.g. at 'if' statements, when the value of the target becomes known, e.g. when the closing brace or matching 'else' is encountered.
In intermediate code generation stage of a compiler we often need to execute "jump" instructions to places in the code that don't exist yet. To deal with this type of cases a target label is inserted for that instruction.
A marker nonterminal in the production rule causes the semantic action to pick up.
Some statements like conditional statements, while, etc. will be represented as a bunch of "if" and "goto" syntax while generating the intermediate code.
The problem is that, These "goto" instructions, do not have a valid reference at the beginning(when the compiler starts reading the source code line by line - A.K.A 1st pass). But, after reading the whole source code for the first time, the labels and references these "goto"s are pointing to, are determined.
The problem is that can we make the compiler able to fill the X in the "goto X" statements in one single pass or not?
The answer is yes.
If we don't use backpatching, this can be achieved by a 2 pass analysis on the source code. But, backpatching lets us to create and hold a separate list which is exclusively designed for "goto" statements. Since it is done in only one pass, the first pass will not fill the X in the "goto X" statements because the comipler doesn't know where the X is at first glance. But, it does stores the X in that exclusive list and after going through the whole code and finding that X, the X is replaced by that address or reference.
Backpaching is the process of leaving blank entries for the goto instruction where the target address is unkonown in the forward transfer in the first pass and filling these unknown in the second pass.
Backpatching:
The syntax directed definition can be implemented in two or more passes (we have both synthesized attributes and inherited attributes).
Build the tree first.
Walk the tree in the depth-first order.
The main difficulty with code generation in one pass is that we may not know the target of a branch when we generate code for flow of control statements
Backpatching is the technique to get around this problem.
Generate branch instructions with empty targets
When the target is known, fill in the label of the branch instructions (backpatching).
backpatching is a process in which the operand field of an instruction containing a forward reference is left blank initially. the address of the forward reference symbol is put into this field when its definition is encountered in the program.
Back patching is the activity of filling up the unspecified information of labels
by using the appropriate semantic expression in during the code generation process.
It is done by:
boolean expression.
flow of control statement.
I'm a big fan of abbrev-mode and I'd like something a bit similar: you start typing and as soon as you enter some punctation (or just a space would be enough) it invokes a function (if I type space after a special abbreviation, of course, just like abbrev-mode does).
I definitely do NOT want to execute some function every single time I hit space...
So instead of expanding the abbreviation using abbrev-mode, it would run a function of my choice.
Of course it needs to be compatible with abbrev-mode, which I use all the time.
How can I get this behavior?
One approach could be to use pre-abbrev-expand-hook. I don't use abbrev mode myself, but it rather sounds as if you could re-use the abbrev mode machinery this way, and simply define some 'abbreviations' which expand to themselves (or to nothing?), and then you catch them in that hook and take whatever action you wish to.
The expand library is apparently related, and that provides expand-expand-hook, which may be another alternative?
edit: Whoops; pre-abbrev-expand-hook is obsolete since 23.1
abbrev-expand-functions is the correct variable to use:
Wrapper hook around `expand-abbrev'.
The functions on this special hook are called with one argument:
a function that performs the abbrev expansion. It should return
the abbrev symbol if expansion took place.
See M-x find-function RET expand-abbrev RET for the code, and you'll also want to read C-h f with-wrapper-hook RET to understand how this hook is used.
EDIT:
Your revised question adds some key details that my answer didn't address. phils has provided one way to approach this issue. Another would be to use yasnippet . You can include arbitrary lisp code in your snippet templates, so you could do something like this:
# -*- mode: snippet -*-
# name: foobars
# key: fbf
# binding: direct-keybinding
# --
`(foo-bar-for-the-win)`
You'd need to ensure your function didn't return anything, or it would be inserted in the buffer. I don't use abbrev-mode, so I don't know if this would introduce conflicts. yas/snippet takes a bit of experimenting to get it running, but it's pretty handy once you get it set up.
Original answer:
You can bind space to any function you like. You could bind all of the punctuation keys to the same function, or to different functions.
(define-key your-mode-map " " 'your-choice-function)
You probably want to do this within a custom mode map, so you can return to normal behaviour when you switch modes. Globally setting space to anything but self-insert would be unhelpful.
Every abbrev is composed of several elements. Among the main elements are the name (e.g. "fbf"), the expansion (any string you like), and the hook (a function that gets called). In your case it sounds like you want the expansion to be the empty string and simply specify your foo-bar-for-the-win as the hook.
As of now I use 3 Notebook :
Functions
Where I have all the functions I created and call in the other Notebooks.
Transformation
Based on the original data, I compute transformations and add columns/List
When data is my raw data, I then call :
t1data : the result of the first transformation
t2data : the result of the second transformation
and so on,
I am yet at t20.
Display & Analysis
Using both the above I create Manipulate object that enable me to analyze the data.
Questions
Is there away to save the results of the Transformation Notebook such that t13data for example can be used in the Display & Analysis Notebooks without running all the previous computations (t1,t2,t3...t12) it is based on ?
Is there a way to use my Functions or transformed data without opening the corresponding Notebook ?
Does my separation strategy make sense at all ?
As of now I systematically open the 3 and have to run them all before being able to do anything, and it takes a while given my poor computing power and yet inefficient codes.
Saving variable states: can be done using DumpSave, Save or Put. Read back using Get or <<
You could make a package from your functions and read those back using Needs or <<
It's not something I usually do. I opt for a monolithic notebook containing everything (nicely layered with sections and subsections so that you can fold open or close) or for a package + slightly leaner analysis notebook depending on the weather and some other hidden variables.
Saving intermediate results
The native file format for Mathematica expressions is the .m file. This is human readable text format, and you can view the file in a text editor if you ever doubt what is, or is not being saved. You can load these files using Get. The shorthand form for Get is:
<< "filename.m"
Using Get will replace or refresh any existing assignments that are explicitly made in the .m file.
Saving intermediate results that are simple assignments (dat = ...) may be done with Put. The shorthand form for Put is:
dat >> "dat.m"
This saves only the assigned expression itself; to restore the definition you must use:
dat = << "dat.m"
See also PutAppend for appending data to a .m file as new results are created.
Saving results and function definitions that are complex assignments is done with Save. Examples of such assignments include:
f[x_] := subfunc[x, 2]
g[1] = "cat"
g[2] = "dog"
nCr = #!/(#2! (# - #2)!) &;
nPr = nCr[##] #2! &;
For the last example, the complexity is that nPr depends on nCr. Using Save it is sufficient to save only nPr to get a fully working definition of nPr: the definition of nCr will automatically be saved as well. The syntax is:
Save["nPr.m", nPr]
Using Save the assignments themselves are saved; to restore the definitions use:
<< "nPr.m" ;
Moving functions to a Package
In addition to Put and Save, or manual creation in a text editor, .m files may be generated automatically. This is done by creating a Notebook and setting Cell > Cell Properties > Initialization Cell on the cells that contain your function definitions. When you save the Notebook for the first time, Mathematica will ask if you want to create an Auto Save Package. Do so, and Mathematica will generate a .m file in parallel to the .nb file, containing the contents of all Initialization Cells in the Notebook. Further, it will update this .m file every time you save the Notebook, so you never need to manually update it.
Sine all Initialization Cells will be saved to the parallel .m file, I recommend using the Notebook only for the generation of this Package, and not also for the rest of your computations.
When managing functions, one must consider context. Not all functions should be global at all times. A series of related functions should often be kept in its own context which can then be easily exposed to or removed from $ContextPath. Further, a series of functions often rely on subfunctions that do not need to be called outside of the primary functions, therefore these subfunctions should not be global. All of this relates to Package creation. Incidentally, it also relates to the formatting of code, because knowing that not all subfunctions must be exposed as global gives one the freedom to move many subfunctions to the "top level" of the code, that is, outside of Module or other scoping constructs, without conflicting with global symbols.
Package creation is a complex topic. You should familiarize yourself with Begin, BeginPackage, End and EndPackage to better understand it, but here is a simple framework to get you started. You can follow it as a template for the time being.
This is an old definition I used before DeleteDuplicates existed:
BeginPackage["UU`"]
UnsortedUnion::usage = "UnsortedUnion works like Union, but doesn't \
return a sorted list. \nThis function is considerably slower than \
Union though."
Begin["`Private`"]
UnsortedUnion =
Module[{f}, f[y_] := (f[y] = Sequence[]; y); f /# Join###] &
End[]
EndPackage[]
Everything above goes in Initialization Cells. You can insert Text cells, Sections, or even other input cells without harming the generated Package: only the contents of the Initialization Cells will be exported.
BeginPackage defines the Context that your functions will belong to, and disables all non-System` definitions, preventing collisions. (There are ways to call other functions from your package, but that is better for another question).
By convention, a ::usage message is defined for each function that it to be accessible outside the package itself. This is not superfluous! While there are other methods, without this, you will not expose your function in the visible Context.
Next, you Begin a context that is for the package alone, conventionally "`Private`". After this point any symbols you define (that are not used outside of this Begin/End block) will not be exposed globally after the Package is loaded, and will therefore not collide with Global` symbols.
After your function definition(s), you close the block with End[]. You may use as many Begin/End blocks as you like, and I typically use a separate one for each function, though it is not required.
Finally, close with EndPackage[] to restore the environment to what it was before using BeginPackage.
After you save the Notebook and generate the .m package (let's say "mypackage.m"), you can load it with Get:
<< "mypackage.m"
Now, there will be a function UnsortedUnion in the Context UU` and it will be accessible globally.
You should also look into the functionality of Needs, but that is a little more advanced in my opinion, so I shall stop here.