I wrote a function in the parser to grab JSON format file back and I want to convert the content to wiki URL, for example:
JSON content
[{"title":"a"},{"title":"b"}]
convert it to like what you type [[a]] [[b]] in the wiki
I don't know enough about JSON to know if this helps, but I hope it does.
Emiliano Bruni has a (free) online HTML-to-Wikitext converter at:
http://www.ebruni.it/en/software/os/i_love_wiki/index.mpl
I have used it several times and it seems to work quite well.
~ Mark
EDIT: I got curious and poked around the interwebs some more and found two potentially helpful sources:
1) A Wikipedia help article, Wikipedia:Tools/Editing tools, with a list of Wikisyntax conversion utilities, including HTML-to-MediaWiki conversion.
2) The (relatively) new Visual Editor available on Wikipedia (and other wikis using MediaWiki that choose to install it) has worked quite well for me since I started using it a few months ago, including for converting URLs to Wikitext. I recognize that Visual Editor has proven controversial among some Wikipedians, but I personally have found it easier to use than source editing or wikiEd (an in-browser text editor for sites using MediaWiki).
Related
I have a large pile of lecture notes in raw HTML format. I would like to add interactive content to these notes, in particular incorporating online exercises. I have some experience implementing online exercises as cgi-bin executables compiled from Haskell code running on the server, interacting with a student record file and sending suitable HTML back to the browser, using Text.Xhtml to generate the content. Now I plan to integrate the notes and the exercises.
The trouble is that I don't want to spend ages manually transforming my raw HTML into Haskell code to generate exactly the raw HTML I started with. Instead, I'd like to put my Haskell code and my HTML in the same source file, with placeholders in the latter for content generated by the former. A suitable tool should then transform this file into Haskell source code for (e.g.) a cgi-bin executable which generates the corresponding page.
Before I go hacking up such a piece of kit, I thought I'd ask if there's better technology out there already. The fixed points are the large legacy lump of HTML, the need to implement the assessment of the exercises in Haskell, and the need to interact with student records on the server. The handicap is that I need to use the departmental web server and I can't reconfigure it (ok, maybe I could ask nicely): that's one of the reasons I currently use cgi-bin executables, which are just fine on our server already, but I'm open to other possibilities.
My current plan is to write a (I mean adapt an existing) preprocessor to support a special syntax for defining functions of type
Html -> ... -> Html -> Html
that looks a lot like raw HTML with splice points. Then what I do with my existing raw HTML is indent it a bit and mark the holes.
But would that be a waste of time? Please, please tell me that this question is a duplicate!
There are Haskell frameworks like Yesod and Happstack which use templating engines like you describe.
Have you looked at the haskell wiki at http://www.haskell.org/haskellwiki/HSP or
http://www.haskell.org/haskellwiki/Web/Libraries/Templating ?
They may do what you need.
You might find someting to do the job here: Templating packages for Haskell.
And you should probably look into Snap, Yesod or Happstack for serving the content.
I have a large pile of lecture notes in raw HTML format. I would like to add interactive content to these notes, in particular incorporating online exercises.
There is already a system (called "ActiveHs"), written in Haskell, that allows to put lecture notes and interactive exercises in one file.
See:
http://pnyf.inf.elte.hu/fp/UsersGuide_en.xml
http://pnyf.inf.elte.hu/fp/Constructive_en.xml
I can really say that it is very well written code and completely open source!
I have lots of scanned images of a magazine(published monthly) and i have to organize it in searchable manner.
User should be able to view magazine issue wise or can search for predefined categories/keywords.
What i have thought for now, is to create CHM as it will need less effort than creating a new custom built software.
For that i will create seperate HTMl page(Programatically) with image embedded in it along with the keywords(Stored in Excel sheet along with path of Image) for which that image should be included in result.
So i want a chm creator that can parse html meta tags and add keywords in chm keywords list.
One such software i have found is Abee CHM Maker
But i need some free alternative.
If you have any other idea to organize it with minimal efforts, then also you are welcome...
The standard (free) way to create chm files is using Microsoft's HTML help workshop:
http://msdn.microsoft.com/en-us/library/windows/desktop/ms670169(v=vs.85).aspx
Kind regards,
Bo
Free Pascal has a CHM creator package, a html DOM implementation and a basic commandline compiler for CHM projects (.hhp). The creator package is independent of MS tools or any other binary blob, and available in source. It is portable as far as FPC is portable (not as portable as gcc on paper, but enough in practice with all major architectures and OSes supported)
One could make something like that, I made something similar, but instead of meta, I folded back titles into TOC and index and cleaned up html (TeX4ht output) and fixed links before turning it into a chm.
But it will require some work, and if you are not familiar with Object Pascal/Delphi (the language), it might be a bridge too far. (the hours required would not compare favorably with the costs of the Abee thing, if that would suit your goals).
On the other hand, in a freely programmable system you can decide yourself how far you automatize things. I put in a lot of work once, and now all new output of tex4ht (with a certain fixed set of settings) formats nicely to chms.
See if this helps you (it certainly does what you need):
KEL CHM Creator: http://dumah7.wordpress.com/2009/02/17/kel-chm-creator-v-1-4-0-0/
Alternatively, I think you could add tags on each picture (right click on it-> Properties->Details->Tags) and use Windows explorer for searching them. I have never done this but it is supposed to be working (I guess).
I want to write a little program that transforms my TeX files into HTML. I want to parse the documents and turn the macros (the build-in and of course my own) into HTML pieces. Here are my requirements:
predefined rules (e.g. begin{itemize} \item text \end{itemize} => <br> <p>text </p> <br/>)
defining own CSS style
ability to convert formulars (extract the formulars, load them in an imagecreator and then save the jpg/png)
easy to maintain and concise
I know there are several technologies out there, but I don't exactly know which is the best for me. Here are the technologies which flow into my mind
Ruby (I/O is easy, formular loading via webrat),
XML XSLT (I don't think that I need just overhead)
perl (there are many libs out there but I'm not quite familiar with it)
bash (I worked with sed and was surprised how easy it was to work with regular expressions)
latex2html ... (these converters won't work for me and they don't give me freedom in parsing)
Any suggestions, hints and comments are welcome.
Thanks for your time, folks.
have a look at pandoc here. it can also be installed on linux or os x. Though it won't do your custom macros. The only thing I've seen that can do a decent job with custom macros is tex4ht, but to really work well you need to be producing .DVI files. If you have a ton of custom macros, writing your own converter is going to take an ass load of time. Even if you only have a few custom macros, it's still going to be a pain. good luck!
Six: TeX
Seven: Haskell
(I gave up trying to persuade SO to start numbering my list from 6).
Note: I realize this question has already been asked (with a ruby slant) here: Creating on-demand, print-quality PDFs (preferably in Ruby if feasible). BUT there was no decent answer IMHO.
So as you may have guessed, I am looking to find the best approach to producing HIGH QUALITY, print ready PDF documents programmatically. Our requirements need us to be able to have design documents that define place holders for dynamic content like images and text i.e. some kind of template mechanism.
The suggestion has been to use Adobe's InDesign server, but this seems like an expensive solution not to mention a little overkill for our need.
Are there any alternative, cheaper and more fitting solutions out there? The language of the solution doesn't really matter, just as long as it can be executes on a Windows box.
My suggestion would be to look at XSL-FO or thereabouts...
You create an XML doc that describes what you want and there are various libraries and toolkits (I've used XEP from RenderX) that will convert said XML into PDF.
In real terms what we did was take a large lump of data in XML format, use XSLT - templates in effect - to convert the data to formating objects which XEP renders up into something (a 500 page hotel directory with auto-generated TOC and Index) that has been consumed quite happily by at least three different commercial printers. We did some other smaller documents too from time to time.
Downside with this is that its not even remotely a WYSIWYG solution - you're effectively compiling "source code" to get PDF out the back. Upside is that the base technologies are reasonably generic even if the specific toolkits may be a bit less so.
You can convert XML templates to PDFs with Prince.
Prince is a computer program that
converts XML and HTML into PDF
documents. Prince can read many XML
formats, including XHTML and SVG.
Prince formats documents according to
style sheets written in CSS.
I have and also know many people that have had much success with ReportLab an open source Python PDF library (http://www.reportlab.org/rl_toolkit.html).
Its extremely easy to use and very quick to get started. So worth trying out.
I don't know why no one has suggested using LaTeX for this. It's an extremely popular open format for document design and not hard to set up a template that you can fill in text or image content. While the reference implementation of LaTeX runs as a standalone program, if that sounds like too many moving parts for you there are wrapper libraries for Python and other languages you can call via an API.
Java language and JasperReports
Java: iText
C#: iTextSharp
depends on what you want to publish, but take a look at Pentaho reporting
http://reporting.pentaho.org/
rinohtype is an open-source document processor that is capable of producing high-quality print-ready PDF documents. You can use one of the built-in document templates (book, article) or define your own template. The look of document elements can be configured by means of CSS-like style sheets. The contents of your document can be parsed from reStructuredText or CommonMark files, or you can build the document tree programmatically.
Full disclosure: I am the author of rinohtype.
Searching for a free application for commercial usage that allows find/replace in multiple files (regular expressions are nice but not a must), that supports opening and saving in UTF-8.
Tried a few like BKReplaceEm but the application ends up saving all the files as ASCII which causes some problems with web-rendering.
Please advise.
[UPDATE] To further clarify, I am searching for a windows utility.
[UPDATE #2] This is going to be used to run through our 450 page site and replace all french characters with the much needed HTML entities.
Notepad++ supports this feature, and is a great little editor in it's own regard.
Edit : Actually, Notepad++ does support replace in files. Click Search -> Find in Files, then select "Replace in files" in the dialog.
In the spirit of previous answer, you can use Perl (which has seamless native Unicode support and whose RegEx capablity are unparalleled). There are Windows perl versions avialable (ActivePerl, Strawberry, or you can use CygWin), and you can even slap GUIs on top of it -= for the latter, you can see what answers are given to my very recent So question :)
Plus, Perl can grab pretty much unlimitedly powerful collection of files, by using globs for simple things, File::Find for more complicated, and using grep on resulting file list to refine further if you need more fancy stuff, e.g. by content of modification time.
UPDATE For a Windows Editor, you can use UltraEdit. It has free evaluation period, and to be perfectly honest, I find the purchase price to be WELL worth paying for this very nice and powerful editor. Among its other features, it supports Unicode, and has pretty fancy search/replace ablities, including Perl RegEx support and S/R in multiple files.
Use sed.
jEdit has a feature called "HyperSearch" (just open the find dialog). You can specify a directory, a file name pattern and jEdit (being based on Java) does support lots of different encodings (and is often smart enough to figure out the correct one).
You could try my editor, Code Trowel
If it doesn't do what you want I'd probably fix it :-)
For windows, Notepad++ is awesome. It's licensed under the GPL. It does search and replace in files and does support regular expressions.