I have .asmx web service and method. But I'm not sure returns json.
Does it return as a Json?
<string xmlns="http://tempuri.org/">
{ "Table": [ { "Key1": "x", "Key2": "x", "Key3": "Ads" } ], "Key4": [ { "Key41": "30", "Key42": "12", "Key43": "1" } ], "Key5": [ { "Key51": "10.4.2017 00:00:00" } ] }
</string>
So method result page writes that text at the top:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
Can I get this data as json ?
May help this one
$cont_data = array( "Table"=>array( "Key1"=> "x",
"Key2"=> "x",
"Key3"=> "Ads"
),
"Key4"=>array(
"Key41"=> "30",
"Key42"=> "12",
"Key43"=> "1"
),
"Key5"=>array(
"Key51"=>"10.4.2017 00:00:00"
)
);
return json_encode($cont_data);
You can get the result as json, json_decode() do this.
Related
Please find the attached Groovy code which I am using to get the particular filed from the response body.
Query 1 :
It is retrieving the results when the I am using the correct Index value like if the data.RenewalDetails[o], will give output as Value 1 and if the data.RenewalDetails[1], output as Value 2.
But in my real case, I will never know about number of blocks in the response, so I want to get all the values that are satisficing the condition, I tried data.RenewalDetails[*] but it is not working. Can you please help ?
Query 2:
Apart from the above condition, I want to add one more filter, where "FamilyCode": "PREMIUM" in the Itemdetails, Can you help on the same ?
def BoundId = new groovy.json.JsonSlurper().parseText('{"data":{"RenewalDetails":[{"ExpiryDetails":{"duration":"xxxxx","destination":"LHR","from":"AUH","value":2,"segments":[{"valudeid":"xxx-xx6262-xxxyyy-1111-11-11-1111"}]},"Itemdetails":[{"BoundId":"Value1","isexpired":true,"FamilyCode":"PREMIUM","availabilityDetails":[{"travelID":"AAA-AB1234-AAABBB-2022-11-10-1111","quota":"X","scale":"XXX","class":"X"}]}]},{"ExpiryDetails":{"duration":"xxxxx","destination":"LHR","from":"AUH","value":2,"segments":[{"valudeid":"xxx-xx6262-xxxyyy-1111-11-11-1111"}]},"Itemdetails":[{"BoundId":"Value2","isexpired":true,"FamilyCode":"PREMIUM","availabilityDetails":[{"travelID":"AAA-AB1234-AAABBB-2022-11-10-1111","quota":"X","scale":"XXX","class":"X"}]}]}]},"warnings":[{"code":"xxxx","detail":"xxxxxxxx","title":"xxxxxxxx"}]}')
.data.RenewalDetails[0].Itemdetails.find { itemDetail ->
itemDetail.availabilityDetails[0].travelID.length() == 33
}?.BoundId
println "Hello " + BoundId
Something like this:
def txt = '''\
{
"data": {
"RenewalDetails": [
{
"ExpiryDetails": {
"duration": "xxxxx",
"destination": "LHR",
"from": "AUH",
"value": 2,
"segments": [
{
"valudeid": "xxx-xx6262-xxxyyy-1111-11-11-1111"
}
]
},
"Itemdetails": [
{
"BoundId": "Value1",
"isexpired": true,
"FamilyCode": "PREMIUM",
"availabilityDetails": [
{
"travelID": "AAA-AB1234-AAABBB-2022-11-10-1111",
"quota": "X",
"scale": "XXX",
"class": "X"
}
]
}
]
},
{
"ExpiryDetails": {
"duration": "xxxxx",
"destination": "LHR",
"from": "AUH",
"value": 2,
"segments": [
{
"valudeid": "xxx-xx6262-xxxyyy-1111-11-11-1111"
}
]
},
"Itemdetails": [
{
"BoundId": "Value2",
"isexpired": true,
"FamilyCode": "PREMIUM",
"availabilityDetails": [
{
"travelID": "AAA-AB1234-AAABBB-2022-11-10-1111",
"quota": "X",
"scale": "XXX",
"class": "X"
}
]
}
]
}
]
},
"warnings": [
{
"code": "xxxx",
"detail": "xxxxxxxx",
"title": "xxxxxxxx"
}
]
}'''
def json = new groovy.json.JsonSlurper().parseText txt
List<String> BoundIds = json.data.RenewalDetails.Itemdetails*.find { itemDetail ->
itemDetail.availabilityDetails[0].travelID.size() == 33 && itemDetail.FamilyCode == 'PREMIUM'
}?.BoundId
assert BoundIds.toString() == '[Value1, Value2]'
Note, that you will get the BoundIds as a List
If you amend your code like this:
def json = new groovy.json.JsonSlurper().parse(prev.getResponseData()
you would be able to access the number of returned items as:
def size = json.data.RenewalDetails.size()
as RenewalDetails represents a List
Just add as many queries you want using Groovy's && operator:
find { itemDetail ->
itemDetail.availabilityDetails[0].travelID.length() == 33 &&
itemDetail.FamilyCode.equals('PREMIUM')
}
More information:
Apache Groovy - Parsing and producing JSON
Apache Groovy: What Is Groovy Used For?
I am using JSON extractor in JMeter. Below is my Response Body. I am using the Json path expression to capture the value, which is working fine.
Apart from the above condition, I need to add one more condition.
If the "travelID" length is equal to 33, then only I need to get the BoundID.
Example : AAA-AB1234-AAABBB-2022-11-10-1111
Total length or count of the above travelID is 33, but sometime I used to get 31,32 also but I need to capture the Bound ID only when the length is 33. Is that feasible ? Please help on the same
PFB sample response body.
{
"data": {
"RenewalDetails": [
{
"ExpiryDetails": {
"duration": "xxxxx",
"destination": "XXX",
"from": "XXX",
"value": 2,
"segments": [
{
"valudeid": "xxx-xx6262-xxxyyy-1111-11-11-1111"
}
]
},
"Itemdetails": [
{
"BoundId": "xxx-1-xxx1-111111111111-1",
"isexpired": true,
"FamilyCode": "PREMIUM",
"availabilityDetails": [
{
"travelID": "AAA-AB1234-AAABBB-2022-11-10-1111",
"quota": "X",
"scale": "XXX",
"class": "X"
}
]
}
]
}
]
},
"warnings": [
{
"code": "xxxx",
"detail": "xxxxxxxx",
"title": "xxxxxxxx"
}
]
}
I don't think it's possible with JSON Extractor, I would rather suggest going for JSR223 PostProcessor and the following Groovy code:
def BoundId = new groovy.json.JsonSlurper().parse(prev.getResponseData())
.data.RenewalDetails[0].Itemdetails.find { itemDetail ->
itemDetail.availabilityDetails[0].travelID.length() == 33
}?.BoundId
vars.put('BoundId', BoundId ?: 'Not Found')
You will be able to refer extracted value as ${BoundId} later on where required.
I am trying to convert some Python code to Julia. Here is the Python code:
url = "http://api.scb.se/OV0104/v1/doris/sv/ssd/START/BE/BE0101/BE0101G/BefUtvKon1749"
json = {
"query": [
{
"code": "Kon",
"selection": {
"filter": "item",
"values": [
"1",
"2"
]
}
},
{
"code": "ContentsCode",
"selection": {
"filter": "item",
"values": [
"000000LV"
]
}
}
],
"response": {
"format": "px"
}
}
r = requests.post(url=url, json=json)
Below is the Julia code, that is not working, with this error message:
syntax: { } vector syntax is discontinued around path:8
top-level scope at population_data.jl:8
using DataFrames, DataFramesMeta, HTTP, JSON3
url = "http://api.scb.se/OV0104/v1/doris/sv/ssd/START/BE/BE0101/BE0101G/BefUtvKon1749"
json = {
"query": [
{
"code": "Kon",
"selection": {
"filter": "item",
"values": [
"1",
"2",
"1+2"
]
}
},
{
"code": "ContentsCode",
"selection": {
"filter": "item",
"values": [
"000000LV"
]
}
}
],
"response": {
"format": "px"
}
}
r = HTTP.post(url, json)
My attempts to solve this are the following:
Convert the json variable to a string using """ around it.
Converting the JSON string to Julia data types, using JSON3.read()
Passing the converted JSON string to the POST request. This gives the following error:
IOError(Base.IOError("read: connection reset by peer (ECONNRESET)", -54) during request(http://api.scb.se/OV0104/v1/doris/sv/ssd/START/BE/BE0101/BE0101G/BefUtvKon1749)
None of it works, and I am not even sure that it is about the JSON format. It could be that I am passing the wrong parameters to the POST request. What should I do?
One way of solving this consists in building the parameters as native julia data structures, and use JSON to convert and use them as the body of your PUT request:
Dictionaries in julia are built using a syntax like Dict(key => value). Arrays are built using a standard syntax: [a, b, c]. The julia native data structure equivalent to your parameters would look like this:
params = Dict(
"query" => [
Dict("code" => "Kon",
"selection" => Dict(
"filter" => "item",
"values" => [
"1",
"2",
"1+2"
]),
),
Dict("code"=> "ContentsCode",
"selection" => Dict(
"filter" => "item",
"values" => [
"000000LV"
]),
),
],
"response" => Dict(
"format" => "px"
))
Then, you can use JSON.json() to build the JSON representation of it as a string and pass it to the HTTP request:
using HTTP
using JSON
url = "http://api.scb.se/OV0104/v1/doris/sv/ssd/START/BE/BE0101/BE0101G/BefUtvKon1749"
# send the request
r = HTTP.request("POST", url,
["Content-Type" => "application/json"],
JSON.json(params))
# retrieve the response body as a string
b = String(r.body)
I have the following (simplified) jOOQ query:
val result = context.select(
jsonObject(
key("id").value(ITEM.ID),
key("title").value(ITEM.NAAM),
key("resources").value(
jsonArrayAgg(ITEM_INHOUD.RESOURCE_ID).absentOnNull()
)
)
).from(ITEM).fetch()
Now the output that I want is:
[
{
"id": "0da04cc5-f70c-4fb3-b5c7-dc645d342631",
"title": "Title1",
"resources": [
"8b0f6d5c-67fc-47ca-be77-d1735e7721ce",
"ea0316db-1cfd-46d7-8260-5c1a4e65a0cd"
]
},
{
"id": "0f7e67e6-5187-47e2-9f1d-dab08feba38b",
"title": "Title2"
}
]
result.formtJSON() gives the following output:
{
"fields": [
{
"name": "json_object",
"type": "JSON"
}
],
"records": [
[
{
"id": "0da04cc5-f70c-4fb3-b5c7-dc645d342631",
"title": "Title 1"
}
]
]
}
Disabling the headers with result.formatJSON(JSONFormat.DEFAULT_FOR_RECORDS) will get me:
[
[
{
"id": "0da04cc5-f70c-4fb3-b5c7-dc645d342631",
"title": "Title1",
"resources": [
"8b0f6d5c-67fc-47ca-be77-d1735e7721ce",
"ea0316db-1cfd-46d7-8260-5c1a4e65a0cd"
]
}
],
[
{
"id": "0f7e67e6-5187-47e2-9f1d-dab08feba38b",
"title": "Title2"
}
]
]
where I don't want the extra array.
Further customizing the JSONformatter with result.formatJSON(JSONFormat().header(false).recordFormat(JSONFormat.RecordFormat.OBJECT)) I get:
[
{
"json_object": {
"id": "0da04cc5-f70c-4fb3-b5c7-dc645d342631",
"title": "Title1",
"resources": [
"8b0f6d5c-67fc-47ca-be77-d1735e7721ce",
"ea0316db-1cfd-46d7-8260-5c1a4e65a0cd"
]
}
},
{
"json_object": {
"id": "0f7e67e6-5187-47e2-9f1d-dab08feba38b",
"title": "Title2"
}
}
]
where I don't want the object wrapped in json_object.
Is there a way to get the output I want?
Doing it with Result.formatJSON()
This is clearly a flaw in the jOOQ 3.14.0 implementation of Result.formatJSON(). In the special case where there is only one column, and that column is of type JSON or JSONB, the column name may not really matter, and thus its contents should be flattened into the object describing the row. I've created a feature request for this: https://github.com/jOOQ/jOOQ/issues/10953. It will be available in jOOQ 3.15.0 and 3.14.4. You will be able to do this:
result.formatJSON(JSONFormat().header(false).wrapSingleColumnRecords(false));
The RecordFormat is irrelevant here. This works the same way for RecordFormat.ARRAY and RecordFormat.OBJECT
Doing it directly with SQL
Of course, you can always work around this by moving all the logic into SQL. You probably simplified your query by omitting a JOIN and GROUP BY. I'm assuming this is equivalent to what you want:
JSON result = context.select(
jsonArrayAgg(jsonObject(
key("id").value(ITEM.ID),
key("title").value(ITEM.NAAM),
key("resources").value(
select(jsonArrayAgg(ITEM_INHOUD.RESOURCE_ID).absentOnNull())
.from(ITEM_INHOUD)
.where(ITEM_INHOUD.ITEM_ID.eq(ITEM.ID))
)
))
).from(ITEM).fetchSingle().value1()
Note that JSON_ARRAYAGG() aggregates empty sets into NULL, not into an empty []. If that's a problem, use COALESCE()
I tried for nearly an hour different approaches, but I don't get it ;(
my JSON object is this:
"typeOfHair": {
"value": [
{
"code": "Dry Hair",
"values": [
{
"value": "DryHair",
"language": "en"
},
{
"value": "TrockenesHaar",
"language": "de"
}
]
},
{
"code": "Any Type of Hair",
"values": [
{
"value": "AnyTypeOfHair",
"language": "en"
},
{
"value": "JedenHaartyp",
"language": "de"
}
]
}
]
}
And my task is to get with Newtonsoft.JSON all values where the language is "de".
My current approach is:
JsonObject.SelectTokens("typeOfHair.value.values[?(#.language == 'de')].value").ToList()
Can someone help me with this?
Kind regards
You're very close. You need to account for the outer value array typeOfHair.value[] by using the JsonPATH wildcard operator [*]:
var values = JsonObject.SelectTokens("typeOfHair.value[*].values[?(#.language == 'de')].value")
// Convert from JValue to string
.Select(v => (string)v)
// Save in a list
.ToList();
And, the result is:
["TrockenesHaar","JedenHaartyp"]
Sample fiddle.
I know the OP specified JSONPath explicitly but for the sake of completeness below is how to achieve the same with LINQ to JSON:
var values = jObject["typeOfHair"]["value"]
.SelectMany(v => v["values"])
.Where(v => (string)v["language"] == "de")
.Select(v => (string)v["value"])
.ToList();
Demo: https://dotnetfiddle.net/1S4sT4