I'm having problems with using fluent in Silverstripe 4. So I tested to install different versions of fluent to see if I was able to get it working. The version of Silverstripe is 4.1.1.
After uninstalling fluent again, I get "server error" and I can't see anything in the php logs and when trying to run in dev mode, I don't see any difference.
One puzzling thing is that a folder named "themes" appeared in the root folder. I think that it was added by composer during the module installation, but I'm not sure. But I do know that git listed the themes folder as an untracked file. Which suggests that it was automatically added. So I removed that folder when uninstalling the module.
Now I'm not sure what to do. I would want to restore the database as it was before installing fluent (I've tried to add language to see if fluent was working). Or at least get back to square one.
How do people usually do when working with Silverstripe and testing modules?
What I've done so far:
Checked the php logs. No errors found.
Added "Director::set_environment_type("dev");" to _config.php, without seeing any difference when loading the page.
Tested to load the page with ?dev=1 without any difference.
I ran composer update and now the site is working. Might be one thing to test for silverstripe noobs (like me).
I am trying to install MySQL on a Windows 10 PC. I downloaded the installer package and followed those steps
Went to https://dev.mysql.com/downloads/windows/
clicked on "MySQL Installer"
Scrolled to Generally Available(GA) Releases section
Clicked on "Windows (x86, 32-bit), MSI Installer" (mysql-installer-community-5.7.21.0.msi) and it started the download.
Once the download was complete, I double clicked on the installer and it gave a usual pop-up for any installation like,"Do you want this app to make changes to your device?" after clicking on "yes" for the answer to this question, it shows "Please wait while Windows configures MySQL-Installer-community" like below screenshot.
And then it keeps showing this installation progress bar for a very long time. Like more than 7-8 hours and the installation never completes
So it seems something is wrong as I don't think MySQL installation needs this long time. I tried to restart my computer and then delete any files related to MySQL from my computer and then started the whole process of installation again. But no luck yet
Anyone has any suggestion on this or did anyone face this kind of issue before? If so, is there a fix or a work around for this?
ok. So finally this is how I resolved my issue. And I found the solution at https://bugs.mysql.com/bug.php?id=82004 . The solution to this problem is to close an open "Windows installer" (the one using 0 memory and CPU) via task manager and the installation should begin running as expected.
Alternative solution: Use an administrator command prompt to run the MySQL installer on Windows 10. Details:
(Note: if you have any problems in the following steps, you can try to restart your computer. Then restart the steps.)
Right-click the Start/Windows icon in the bottom-left corner of Windows.
Click: Windows PowerShell (Admin).
A window asks: Do you want to allow this app to make changes to your device? Click: Yes.
Change to the directory with the MySQL installer. For example, if you downloaded the MySQL installer, type something like:
cd C:\Users\my_username\Downloads\
(Note: To save some typing, you can type a few characters, and then press the tab key, to make Windows show you various auto-completion options.)
Run the MySQL installer. Type something like the following command---make sure to include the period and backslash at the beginning---and press Enter.
.\mysql-installer-community-8.0.11.0.msi
Note: The idea of using an administrator command prompt came from John Geffe, in the link below, which was cited in the answer written by the original poster (user8425592):
https://bugs.mysql.com/bug.php?id=82004
Bug #82004 MySQL Installer freezes during "Please wait while Windows configures..." phase
[6 Feb 3:58] John Geffe
To get past this problem I had to run the .msi installer from an the
Administrator command prompt. Hopefully this helps someone in the
future.
[19 Apr 18:14] Jim McCauley
John Geffe: Thanks! Your note on installing as an administrator seems
to have taken care of the problem.
this did the trick for me: https://ao.ms/mysql-community-server-msi-installer-hangs-on-windows-10/
run cmd (commandline) as Administrator
cd to your location that you downloaded the .MSI to
run the “msiexec” commandline tool with option “/i” as follows:
msiexec /i [replace with file name]
example: msiexec /i mysql-installer-community-5.7.20.0.msi
Another thing that worked for me was running the installer in compatibility mode for previous version of Windows. You can try that as well.
Go to the link you provided (the first one) and try installing MySql Workbench. That is the version that is commonly used, and one that I verified works in Windows 10. Here is the link: https://dev.mysql.com/downloads/workbench/
Obviously, make sure you choose the right architecture, have the correct permissions to install software, and have enough space on your hard drive, or on the machine you are installing to.
Please install "Update for Visual C++ 2013 and Visual C++ Redistributable Package" from Microsoft Site "http://download.microsoft.com/download/0/5/6/056DCDA9-D667-4E27-8001-8A0C6971D6B1/vcredist_x64.exe"
Please look here at https://support.microsoft.com/en-in/help/3179560/update-for-visual-c-2013-and-visual-c-redistributable-package
Yes, I also got the same problem on my Windows 10.
Followed the Powershell solution and it worked.
Just repeat the above:
Click Start on bottom left corner
Scroll down the application list until Windows Powershell
Select Windows Powershell again on sub-menu
Type in cd (to change to your .msi folder)
Type .\xxxxx.msi (this is the installer file name)
All good.
Once you install the above package run the installer again and do the steps. You will be able to install the mysql-installer-community-5.7.21.0 for 64 bit windows 10
closing Windows Installer instances using 0 memory and CPU helps me to get past this problem.
For me on Window-10 machine, there was a problem with the "mysql-connector-net-8.0.11.msi". I was not able to uninstall this and hence all my subsequent efforts to install MySQL were failing. I did the following to overcome this issue.
Re-installed "mysql-connector-net-8.0.11.msi" Get it here and used the 'Repair' option
Installed the "mysql-installer-web-community-8.0.11.0.msi"
These two things solved my problem. Hope this helps.
The reson is your antivirus didn't allow the mysql, so Disable protection(until restart),( in your task bar right side click the arrow and right click to antivirus,to select (Disable protection(until restart)).then restart your computer again install mysql installer it will work.
For this issue just run .msi file in command administration like
E:\mysql-installer-community-8.0.20.0.msi\
follow this link:
https://kb.foxitsoftware.com/hc/en-us/articles/360040660611-How-to-install-MSI-from-command-line-with-administrator
In my case, an upgrade to 5.7.29 on Windows 10 via mysql-installer-web-community-8.0.20.0.msi, the install froze "backing up the database". The log tab showed no activity for 8 minutes. I clicked on cancel, then at the "are you sure" prompt I declined to cancel, and all of a sudden the install was working again. Very strange...
I encountered the same problem, preparing but can never get started. Tried to close other installation programs with no use, but I took the inspiration and proceeded with restart the computer and it worked nicely. So, I think the issue is to get rid of everything that could be in the background running that somehow interferes the installation.
You should run the installer as an administrator but this specific installation may not provide an option for this. Some might have it but it's most likely that it's unavailable for many users. So you should run it in cmd or powershell. And don't forget to run these shells as an administrator coz that's the whole point here. Once there, navigate to the installer's location which usually is in the downloads directory and run it using this command ./name.msi
Make sure no other ongoing installation of this instance. Close it if there exists one and undo the changes made by uninstalling it from the panel. If still facing difficulties, try restarting your machine and repeat this procedure...
Have fun
I had the same Problem, A simple solution is to give access the "SYSTEM" to the msiserver...I know, this is hard to understand what I am saying....You can Simply see this Video and you will definitely find the answer https://www.youtube.com/watch?v=6SdXMjXmnUk, It is a matter of just 3 minutes...
I encountered the same issue of taking too much time to install mysql community installer.I tried 3 times by cancelling the installation and restarting to perform a new installation.But had same issue. I tried 2 things
First to end all tasks associated with installation which I performed for installing mysql using Task Manager
Reinitiated the installation but didn't solved my issue.
Secondly tried to install through Windows Powershell as admin, which solved the problem.
Click on the Windows icon/start on the bottom left corner.
Right click and select the option Windows Powershell (Admin).
A pop up window will ask Do you want to allow this app to make changes to your device?....Click Yes.
Now cd to your downloads folder/wherever you downloaded the .msi file (For example cd C:\Users\MYPC\Downloads).
Once you reach to the folder where the .msi file is kept, run the following command.
.\mysql-installer-web-community-8.0.23.0.msi (Note: this is the version which I have downloaded, modify as your version).
I've been working with libgdx for 2 days, and I'm starting to get the hang of it.
I'm comfortable with deployment on Android and desktop, but I've got no clue about how to run/debug or deploy the HTML5 version.
When I run as web application, the link gives me an http error 404.
I did what they say on the libgdx wiki, but that ain't working, so, help would be welcome.
BTW, the app's working fine on Android and desktop.
This worked for me:
In Eclipse -- right click on the *-html project. Select "Google" -> "GWT Compile". This will perform a GWT compile on the project, it can take a while so be patient. Once this is completed, I was able to copy the expanded war directory into my tomcat webapps directory. Tomcat was already running, it picked up the change and deployed the game, I was able to load it via localhost:8080/war/ I later renamed the directory (the one in the webapps folder) to something more appropriate for my project.
Good luck.
I ran into this problem for over an hour before realizing that when I selected "run as web application" and eclipse asked me to point to the war directory, I was silly enough to have been selecting the root directory of the project.
Once I went back and pointed to the actual war folder, it ran without issue. Silly I know, but might not be a bad idea to check, esp if anyone is setting this up at 1 am like I am lol.
According to the current date (December 2014), Libgdx now uses gradle and deploying using the mikeys's answer might not work for you. Follow the following guide for the best solution for this problem:
https://github.com/libgdx/libgdx/wiki/Gradle-on-the-Commandline
It's a bit difficult to deploy the app correctly. In the wiki of Libgdx (in google code) you can find in one of the first entries how to deploy and debug the app. The easiest way is to install and configure a Tomcat server, do the steps of the wiki and that's all. If you don't want deploy the app, only test it, you can do it directly from eclipse with the embedded server jetty included on the GWT Sdk. Hope this helps you.
I am using Eclipse Helios (3.6). I want to use Mercurial for version management of the program. I have take the help of the below link to find out the plugin but not got any success:
Mercurial Eclipse Plugin
Can any one please help to install Mercurial plugins inside my Eclipse and I also don't know how to use also. I have gone through the video also but not clear.
http://www.youtube.com/watch?v=9OBg6Zv0Tns
My question is that I want to use Mercurial in my project for version control. I know what Mercurial is, but don't know how to use it.
I want to know what is the initial setup that I have do if I want to use Mercurial set up in my project.
When I am trying to add new software It is giving me following error.
the 'Duplicate Location' error message in your screenshot would indicate that there is already an update site setup for that URL.
In the screen before doing the 'add repository' look at the list of current update sites and you may find one for Mercurial already. Make sure it is selected and a list of all the features for that update site will be listed for you. Then you can select the MercurialEclipse and MercurialBinaries features and install then in Eclipse
The Mercurial Eclipse homepage is here: http://javaforge.com/project/HGE.
They have installation instructions there:
[...] you can get the plugin easily using the Eclipse Update Manager, just click Help → Software Updates in Eclipse. The Eclipse Update Site for MercurialEclipse is available at this URL:
http://cbes.javaforge.com/update
If you are not familiar with getting new software and updates to Eclipse, please read this article.
I have opened a project in netbeans to view the project but there is a same error in most of the files. It says that "package javax.ejb does not exist". This is a working project and I am not sure what is wrong. Can anyone help me?
Try this first: http://forums.netbeans.org/topic44810.html
If that doesn't fix your problem, you can right click on your project and go to the properties section. Click on the Libraries section and select "Add Library". Then scroll down until you find the Libraries that start with "Java" (for example: Java EE 6 API Library). I add all of the Java libraries to my project to resolve this issue, however you might add them one at a time and see which one resolves it.
you just need to import Java EE Web 6 API Library to fix this issue, these libraries must be imported under the libraries folder:
right click Add library, click on import library, scroll down and look for Java EE Web 6 API Library, click on import library and finally click on add library.
That should fix any issues
In my case I was working with java with ant java web app, i was also using Java EE Version Java EE 6 web
I had the same problem when I tried to open a Java web service application and managed to resolve it after trying out a few things. For a Java web service application, there can be multiple causes to the problem. You may have "EJB and EAR" plugin already installed, however, Netbeans may not know the web server to use to run your application. It may have complained that "One or more projects do not have the target server set properly" when the project was opened. To resolve this problem, you have to assign a web server for the project. This is to be done not only for the main project, but also for the required projects that the main project may be dependent upon.
You first need to ensure that you have opened not just the main project, but also the required projects. To open the required projects, right-click on the main projects name in the main projects window and select Open Required Projects -> Open All Projects. After opening, the project names may be colored red in the project window to indicate problem.
In order to use a web server, you need to have one already installed. I chose Glassfish. Download and install Glassfish from https://glassfish.java.net/download.html, if you haven't done so. Also install the "Glassfish Server" plugin for Netbeans, if it's not already installed.
Now, in the Netbeans project window, right-click on the main project name and select "Resolve missing solver issue". If you see "Glassfish server" in the pop-up window that appears, select that one and click ok. If you don't see it, click "Add Server" then select "Glassfish Server", and setup the Glassfish server. Here you need to provide the installation directory of your Glassfish server, but I simply used the default values for the rest. Later I used username "admin" with blank password for running the project. Also perform the same steps to resolve the missing server for all of the required projects.