About running mysqldump command in centos - mysql

mysqldump -uroot -p'passwd' --database databasename > /home/www/test.com/test.sql
When I run command above, it have no problem.
But when I change the test.com folder, for example:
mysqldump -uroot -p'passwd' --database databasename > /home/www/test2.com/test.sql
It shows the error:
bash: /home/www/test2.com/test.sql: No such file or directory
The path was correct, why?

sudo mkdir -p /home/www/test2.com
(Run it as a user which will dump the mysql so that it has write permissions too)
mysqldump -uroot -p'passwd' --database databasename > /home/www/test2.com/test.sql

Related

MySQL 5.7 - Export Dump [duplicate]

I have a database that is quite large so I want to export it using Command Prompt but I don't know how to.
I am using WAMP.
First check if your command line recognizes mysql command. If not go to command & type in:
set path=c:\wamp\bin\mysql\mysql5.1.36\bin
Then use this command to export your database:
mysqldump -u YourUser -p YourDatabaseName > wantedsqlfile.sql
You will then be prompted for the database password.
This exports the database to the path you are currently in, while executing this command
Note: Here are some detailed instructions regarding both import and export
Simply use the following command,
For Export:
mysqldump -u [user] -p [db_name] | gzip > [filename_to_compress.sql.gz]
For Import:
gunzip < [compressed_filename.sql.gz] | mysql -u [user] -p[password] [databasename]
Note: There is no space between the keyword '-p' and your password.
Well you can use below command,
mysqldump --databases --user=root --password your_db_name > export_into_db.sql
and the generated file will be available in the same directory where you had ran this command.
You could find more on the official reference for mysqldump: Import Export MySQL DB
Note: use --databases instead of --database since the last one is no more supported.
Enjoy :)
First of all
open command prompt then open bin directory in cmd (i hope you're aware with cmd commands)
go to bin directory of your MySql folder in WAMP program files.
run command
mysqldump -u db_username -p database_name > path_where_to_save_sql_file
press enter system will export particular database and create sql file to the given location.
i hope you got it :)
if you have any question please let me know.
Go to command prompt at this path,
C:\Program Files (x86)\MySQL\MySQL Server 5.0\bin>
Then give this command to export your database (no space after -p)
mysqldump -u[username] -p[userpassword] yourdatabase > [filepath]wantedsqlfile.sql
Locate your mysql instance with:
which mysql
If this is correct then export with the following (else navigate to the mysql instance in your mamp folder in bin):
mysqldump -u [username] -p [password] [dbname] > filename.sql
And if you wish to zip it at the sametime:
mysqldump -u [username] -p [password] [db] | gzip > filename.sql.gz
You can then move this file between servers with:
scp user#xxx.xxx.xxx.xxx:/path_to_your_dump/filename.sql.gz your_detination_path/
(where xxx.xxx.xxx.xxx is the server IP address)
And then import it with:
gunzip filename.sql.gz | mysql -u [user] -p [password] [database]
To export PROCEDUREs, FUNCTIONs & TRIGGERs too, add --routines parameter:
mysqldump -u YourUser -p YourDatabaseName --routines > wantedsqlfile.sql
The problem with all these solutions (using the > redirector character) is that you write your dump from stdout which may break the encoding of some characters of your database.
If you have a character encoding issue. Such as :
ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ...
then, you MUST use -r option to write the file.
MySQL
mysqldump -u user -pyour-password-without-space-between-letter-p-and-your-password --default-character-set=utf8 --host $HOST database-name -r dump.sql
Using Docker
docker exec --rm -v $pwd:dump -it mysql:5:7 mysqldump -u user -pyour-password-without-space-between-letter-p-and-your-password --default-character-set=utf8 --host $HOST database-name -r dump/dump.sql
Note: this mounts the current path as dump inside the instance.
We found the answer here
Conversely, don't use < to import your dump into your database, again, your non-utf8 characters may not be passed; but prefer source option.
mysql -u user -pYourPasswordYouNowKnowHow --default-character-set=utf8 your-database
mysql> SET names 'utf8'
mysql> SOURCE dump.sql
Give this command to export your database, this will include date as well
mysqldump -u[username] -p[userpassword] --databases yourdatabase | gzip > /home/pi/database_backup/database_`date '+%m-%d-%Y'`.sql.gz
(no space after -p)
I have installed my wamp server in D: drive so u have to go to the following path from ur command line->(and if u have installed ur wamp in c: drive then just replace the d: wtih c: here)
D:\>cd wamp
D:\wamp>cd bin
D:\wamp\bin>cd mysql
D:\wamp\bin\mysql>cd mysql5.5.8 (whatever ur verserion will be displayed here use keyboard Tab button and select the currently working mysql version on your server if you have more than one mysql versions)
D:\wamp\bin\mysql\mysql5.5.8>cd bin
D:\wamp\bin\mysql\mysql5.5.8\bin>mysqldump -u root -p password db_name > "d:\backupfile.sql"
here root is user of my phpmyadmin
password is the password for phpmyadmin so if u haven't set any password for root just nothing type at that place,
db_name is the database (for which database u r taking the backup)
,backupfile.sql is the file in which u want ur backup of ur database and u can also change the backup file location(d:\backupfile.sql) from to any other place on your computer
mysqldump -h [host] -p -u [user] [database name] > filename.sql
Example in localhost
mysqldump -h localhost -p -u root cookbook > cookbook.sql
mysqldump --no-tablespaces -u username -p pass database_name > db_backup_file.sql
Syntax
(mysqldump.exe full path) -u (user name) -p (password) (database name) > (export database file full path)
Example
c:>d:\wamp\bin\mysql\mysql5.6.12\bin\mysqldump.exe -u root -p mydbname > d:\mydb.sql
where d:\wamp\bin\mysql\mysql5.6.12\bin\mysqldump.exe will be your actual mysqldump.exe path, mydbname is the name of database which you want to export and d:\mydb.sql is the path where you want to store the exported database.
For import:
mysql -u db_username -p newFileName < databasName.sql
For export:
mysqldump -u db_username -p databasName > newFileName.sql
I have used wamp server. I tried on
c:\wamp\bin\mysql\mysql5.5.8\bin\mysqldump -uroot -p db_name > c:\somefolder\filename.sql
root is my username for mysql, and if you have any password specify it with:
-p[yourpassword]
Hope it works.
For windows OS :
When you get error 1064 mysql (42000) while trying to execute mysqldump command, exit from current terminal. And execute mysqldump command.
mysql>exit
c:\xampp\mysql\bin>mysqldump -uroot -p --databases [database_name] > name_for_export_db.sql
I was trying to take the dump of the db which was running on the docker and came up with the below command to achieve the same:
docker exec <container_id/name> /usr/bin/mysqldump -u <db_username> --password=<db_password> db_name > .sql
Hope this helps!
mysql -u -p databaseName>fileToPutDatabase
Login in your databse server and then hit the below command:-
mysql -u username -p databasename > exportfilename.sql
Then it will ask for password Enter the password and hit enter,it will take some time your database will be exported.
You can use this script to export or import any database from terminal
given at this link: https://github.com/Ridhwanluthra/mysql_import_export_script/blob/master/mysql_import_export_script.sh
echo -e "Welcome to the import/export database utility\n"
echo -e "the default location of mysqldump file is: /opt/lampp/bin/mysqldump\n"
echo -e "the default location of mysql file is: /opt/lampp/bin/mysql\n"
read -p 'Would like you like to change the default location [y/n]: ' location_change
read -p "Please enter your username: " u_name
read -p 'Would you like to import or export a database: [import/export]: ' action
echo
mysqldump_location=/opt/lampp/bin/mysqldump
mysql_location=/opt/lampp/bin/mysql
if [ "$action" == "export" ]; then
if [ "$location_change" == "y" ]; then
read -p 'Give the location of mysqldump that you want to use: ' mysqldump_location
echo
else
echo -e "Using default location of mysqldump\n"
fi
read -p 'Give the name of database in which you would like to export: ' db_name
read -p 'Give the complete path of the .sql file in which you would like to export the database: ' sql_file
$mysqldump_location -u $u_name -p $db_name > $sql_file
elif [ "$action" == "import" ]; then
if [ "$location_change" == "y" ]; then
read -p 'Give the location of mysql that you want to use: ' mysql_location
echo
else
echo -e "Using default location of mysql\n"
fi
read -p 'Give the complete path of the .sql file you would like to import: ' sql_file
read -p 'Give the name of database in which to import this file: ' db_name
$mysql_location -u $u_name -p $db_name < $sql_file
else
echo "please select a valid command"
fi

MYSQL_DUMP export database

Trying to export database from MAMP server. I tried commands:
# mysql_dump -u root -proot db_name > db_name.sql
# Applications/MAMP/Library/bin/mysql_dump -u root -proot db_name > db_name.sql
with and without the # sign.
all i get is a file with nothing in it.
Any other suggestions?
mysqldump -u root -proot yourdatabase > export.sql works fine

Downloading MySQL dump from command line

I am moving away from Linode because I don't have the Linux sysadmin skills necessary; before I complete the transition to a more noob-friendly service, I need to download the contents of a MySQL database. Is there a way I can do this from the command line?
You can accomplish this using the mysqldump command-line function.
For example:
If it's an entire DB, then:
$ mysqldump -u [uname] -p db_name > db_backup.sql
If it's all DBs, then:
$ mysqldump -u [uname] -p --all-databases > all_db_backup.sql
If it's specific tables within a DB, then:
$ mysqldump -u [uname] -p db_name table1 table2 > table_backup.sql
You can even go as far as auto-compressing the output using gzip (if your DB is very big):
$ mysqldump -u [uname] -p db_name | gzip > db_backup.sql.gz
If you want to do this remotely and you have the access to the server in question, then the following would work (presuming the MySQL server is on port 3306):
$ mysqldump -P 3306 -h [ip_address] -u [uname] -p db_name > db_backup.sql
It should drop the .sql file in the folder you run the command-line from.
EDIT: Updated to avoid inclusion of passwords in CLI commands, use the -p option without the password. It will prompt you for it and not record it.
In latest versions of mysql, at least in mine, you cannot put your pass in the command directly.
You have to run:
mysqldump -u [uname] -p db_name > db_backup.sql
and then it will ask for the password.
If downloading from remote server, here is a simple example:
mysqldump -h my.address.amazonaws.com -u my_username -p db_name > /home/username/db_backup_name.sql
The -p indicates you will enter a password, it does not relate to the db_name. After entering the command you will be prompted for the password. Type it in and press enter.
On windows you need to specify the mysql bin where the mysqldump.exe resides.
cd C:\xampp\mysql\bin
mysqldump -u[username] -p[password] --all-databases > C:\localhost.sql
save this into a text file such as backup.cmd
Don't go inside mysql, just open Command prompt and directly type this:
mysqldump -u [uname] -p[pass] db_name > db_backup.sql
Just type mysqldump or mysqldump --help in your cmd will show how to use
Here is my cmd result
C:\Program Files\MySQL\MySQL Server 5.0\bin>mysqldump
Usage: mysqldump [OPTIONS] database [tables]
OR mysqldump [OPTIONS] --databases [OPTIONS] DB1 [DB2 DB3...]
OR mysqldump [OPTIONS] --all-databases [OPTIONS]
For more options, use mysqldump --help
Go to MySQL installation directory and open cmd from there.
Then execute the below command to get a backup of your database.
mysqldump -u root -p --add-drop-database --databases db> C:\db-dontdelete\db.sql
If you are running the MySQL other than default port:
mysqldump.exe -u username -p -P PORT_NO database > backup.sql
For those who wants to type password within the command line. It is possible but recommend to pass it inside quotes so that the special character won't cause any issue.
mysqldump -h'my.address.amazonaws.com' -u'my_username' -p'password' db_name > /path/backupname.sql
If you have the database named archiedb, use this:
mysql -p <password for the database> --databases archiedb > /home/database_backup.sql
Assuming this is Linux, choose where the backup file will be saved.
For some versions of MySQL try.
sudo mysqldump [database name] > db_backup.sql
mysqldump is another program (.exe file) in the MySQL directory
Program Files\MySQL\MySQL Server 8.0\bin
step 1: First you have to go to the path and open CMD from the folder.
step 2: Then type mysqldump in the CMD
it should display as follows
Usage: mysqldump [OPTIONS] database [tables]
OR mysqldump [OPTIONS] --databases [OPTIONS] DB1 [DB2 DB3...]
OR mysqldump [OPTIONS] --all-databases [OPTIONS]
For more options, use mysqldump --help
step 3: Then type this command
mysqldump -u [user_name] -p [database_name] > D:\db_dump.sql
Note :
you should provide an absolute path for the output file.
Here I provide D:\
For Windows users you can go to your mysql folder to run the command
e.g.
cd c:\wamp64\bin\mysql\mysql5.7.26\bin
mysqldump -u root -p databasename > dbname_dump.sql
Note: This step only comes after dumping your MySQL file(which most of the answers above have addressed).
It assumes that you have the said dump file in your remote server and now you want to bring it down to your local computer.
To download the dumped .sql file from your remote server to your local computer, do
scp -i YOUR_SSH_KEY your_username#IP:name_of_file.sql ./my_local_project_dir
#echo off
for /f "tokens=2 delims==" %%a in ('wmic OS Get localdatetime /value') do set "dt=%%a"
set "YY=%dt:~2,2%" & set "YYYY=%dt:~0,4%" & set "MM=%dt:~4,2%" & set "DD=%dt:~6,2%"
set "HH=%dt:~8,2%" & set "Min=%dt:~10,2%" & set "Sec=%dt:~12,2%"
set "datestamp=%YYYY%.%MM%.%DD%.%HH%.%Min%.%Sec%"
set drive=your backup folder
set databaseName=your databasename
set user="your database user"
set password="your database password"
subst Z: "C:\Program Files\7-Zip"
subst M: "D:\AppServ\MySQL\bin"
set zipFile="%drive%\%databaseName%-%datestamp%.zip"
set sqlFile="%drive%\%databaseName%-%datestamp%.sql"
M:\mysqldump.exe --user=%user% --password=%password% --result-file="%sqlFile%" --databases %databaseName%
#echo Mysql Backup Created
Z:\7z.exe a -tzip "%zipFile%" "%sqlFile%"
#echo File Compress End
del %sqlFile%
#echo Delete mysql file
pause;

mysql dump, windows, seperate files for each DB, all databases option

Does anybody have an example on how to dump all databases uses mysql dump? And possible all a new file for each DB?
I'm using the follow command:
mysqldump -u root -p pw --all-databases > backup.sql;
It's returning with "You have an error in your SQL sytax";
Thanks!
There is an error in your command, it should be no space after -p,
like
mysqldump -u root -ppw --all-databases > backup.sql;
I not sure how many database you have, usually you can do this :-
mysqldump -u root -ppw db_a > db_a.sql;
mysqldump -u root -ppw db_b > db_b.sql;
...
... for all the databases

How to export a mysql database using Command Prompt?

I have a database that is quite large so I want to export it using Command Prompt but I don't know how to.
I am using WAMP.
First check if your command line recognizes mysql command. If not go to command & type in:
set path=c:\wamp\bin\mysql\mysql5.1.36\bin
Then use this command to export your database:
mysqldump -u YourUser -p YourDatabaseName > wantedsqlfile.sql
You will then be prompted for the database password.
This exports the database to the path you are currently in, while executing this command
Note: Here are some detailed instructions regarding both import and export
Simply use the following command,
For Export:
mysqldump -u [user] -p [db_name] | gzip > [filename_to_compress.sql.gz]
For Import:
gunzip < [compressed_filename.sql.gz] | mysql -u [user] -p[password] [databasename]
Note: There is no space between the keyword '-p' and your password.
Well you can use below command,
mysqldump --databases --user=root --password your_db_name > export_into_db.sql
and the generated file will be available in the same directory where you had ran this command.
You could find more on the official reference for mysqldump: Import Export MySQL DB
Note: use --databases instead of --database since the last one is no more supported.
Enjoy :)
First of all
open command prompt then open bin directory in cmd (i hope you're aware with cmd commands)
go to bin directory of your MySql folder in WAMP program files.
run command
mysqldump -u db_username -p database_name > path_where_to_save_sql_file
press enter system will export particular database and create sql file to the given location.
i hope you got it :)
if you have any question please let me know.
Go to command prompt at this path,
C:\Program Files (x86)\MySQL\MySQL Server 5.0\bin>
Then give this command to export your database (no space after -p)
mysqldump -u[username] -p[userpassword] yourdatabase > [filepath]wantedsqlfile.sql
Locate your mysql instance with:
which mysql
If this is correct then export with the following (else navigate to the mysql instance in your mamp folder in bin):
mysqldump -u [username] -p [password] [dbname] > filename.sql
And if you wish to zip it at the sametime:
mysqldump -u [username] -p [password] [db] | gzip > filename.sql.gz
You can then move this file between servers with:
scp user#xxx.xxx.xxx.xxx:/path_to_your_dump/filename.sql.gz your_detination_path/
(where xxx.xxx.xxx.xxx is the server IP address)
And then import it with:
gunzip filename.sql.gz | mysql -u [user] -p [password] [database]
To export PROCEDUREs, FUNCTIONs & TRIGGERs too, add --routines parameter:
mysqldump -u YourUser -p YourDatabaseName --routines > wantedsqlfile.sql
The problem with all these solutions (using the > redirector character) is that you write your dump from stdout which may break the encoding of some characters of your database.
If you have a character encoding issue. Such as :
ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ...
then, you MUST use -r option to write the file.
MySQL
mysqldump -u user -pyour-password-without-space-between-letter-p-and-your-password --default-character-set=utf8 --host $HOST database-name -r dump.sql
Using Docker
docker exec --rm -v $pwd:dump -it mysql:5:7 mysqldump -u user -pyour-password-without-space-between-letter-p-and-your-password --default-character-set=utf8 --host $HOST database-name -r dump/dump.sql
Note: this mounts the current path as dump inside the instance.
We found the answer here
Conversely, don't use < to import your dump into your database, again, your non-utf8 characters may not be passed; but prefer source option.
mysql -u user -pYourPasswordYouNowKnowHow --default-character-set=utf8 your-database
mysql> SET names 'utf8'
mysql> SOURCE dump.sql
Give this command to export your database, this will include date as well
mysqldump -u[username] -p[userpassword] --databases yourdatabase | gzip > /home/pi/database_backup/database_`date '+%m-%d-%Y'`.sql.gz
(no space after -p)
I have installed my wamp server in D: drive so u have to go to the following path from ur command line->(and if u have installed ur wamp in c: drive then just replace the d: wtih c: here)
D:\>cd wamp
D:\wamp>cd bin
D:\wamp\bin>cd mysql
D:\wamp\bin\mysql>cd mysql5.5.8 (whatever ur verserion will be displayed here use keyboard Tab button and select the currently working mysql version on your server if you have more than one mysql versions)
D:\wamp\bin\mysql\mysql5.5.8>cd bin
D:\wamp\bin\mysql\mysql5.5.8\bin>mysqldump -u root -p password db_name > "d:\backupfile.sql"
here root is user of my phpmyadmin
password is the password for phpmyadmin so if u haven't set any password for root just nothing type at that place,
db_name is the database (for which database u r taking the backup)
,backupfile.sql is the file in which u want ur backup of ur database and u can also change the backup file location(d:\backupfile.sql) from to any other place on your computer
mysqldump -h [host] -p -u [user] [database name] > filename.sql
Example in localhost
mysqldump -h localhost -p -u root cookbook > cookbook.sql
mysqldump --no-tablespaces -u username -p pass database_name > db_backup_file.sql
Syntax
(mysqldump.exe full path) -u (user name) -p (password) (database name) > (export database file full path)
Example
c:>d:\wamp\bin\mysql\mysql5.6.12\bin\mysqldump.exe -u root -p mydbname > d:\mydb.sql
where d:\wamp\bin\mysql\mysql5.6.12\bin\mysqldump.exe will be your actual mysqldump.exe path, mydbname is the name of database which you want to export and d:\mydb.sql is the path where you want to store the exported database.
For import:
mysql -u db_username -p newFileName < databasName.sql
For export:
mysqldump -u db_username -p databasName > newFileName.sql
I have used wamp server. I tried on
c:\wamp\bin\mysql\mysql5.5.8\bin\mysqldump -uroot -p db_name > c:\somefolder\filename.sql
root is my username for mysql, and if you have any password specify it with:
-p[yourpassword]
Hope it works.
For windows OS :
When you get error 1064 mysql (42000) while trying to execute mysqldump command, exit from current terminal. And execute mysqldump command.
mysql>exit
c:\xampp\mysql\bin>mysqldump -uroot -p --databases [database_name] > name_for_export_db.sql
I was trying to take the dump of the db which was running on the docker and came up with the below command to achieve the same:
docker exec <container_id/name> /usr/bin/mysqldump -u <db_username> --password=<db_password> db_name > .sql
Hope this helps!
mysql -u -p databaseName>fileToPutDatabase
Login in your databse server and then hit the below command:-
mysql -u username -p databasename > exportfilename.sql
Then it will ask for password Enter the password and hit enter,it will take some time your database will be exported.
You can use this script to export or import any database from terminal
given at this link: https://github.com/Ridhwanluthra/mysql_import_export_script/blob/master/mysql_import_export_script.sh
echo -e "Welcome to the import/export database utility\n"
echo -e "the default location of mysqldump file is: /opt/lampp/bin/mysqldump\n"
echo -e "the default location of mysql file is: /opt/lampp/bin/mysql\n"
read -p 'Would like you like to change the default location [y/n]: ' location_change
read -p "Please enter your username: " u_name
read -p 'Would you like to import or export a database: [import/export]: ' action
echo
mysqldump_location=/opt/lampp/bin/mysqldump
mysql_location=/opt/lampp/bin/mysql
if [ "$action" == "export" ]; then
if [ "$location_change" == "y" ]; then
read -p 'Give the location of mysqldump that you want to use: ' mysqldump_location
echo
else
echo -e "Using default location of mysqldump\n"
fi
read -p 'Give the name of database in which you would like to export: ' db_name
read -p 'Give the complete path of the .sql file in which you would like to export the database: ' sql_file
$mysqldump_location -u $u_name -p $db_name > $sql_file
elif [ "$action" == "import" ]; then
if [ "$location_change" == "y" ]; then
read -p 'Give the location of mysql that you want to use: ' mysql_location
echo
else
echo -e "Using default location of mysql\n"
fi
read -p 'Give the complete path of the .sql file you would like to import: ' sql_file
read -p 'Give the name of database in which to import this file: ' db_name
$mysql_location -u $u_name -p $db_name < $sql_file
else
echo "please select a valid command"
fi