I have a quick question regarding my SSRS report.
I currently have a report where I show a list of customers and their balances, sorted from A-Z.
However, there are a 4 customers that I would like to show one after another,
For example,
Adam
Alex
Dean
Brian* <-- I would like Brian and Fernando to be as shown, one after another, while the rest of the list still maintains A-Z
Fernando*
Leonard
Mark
Is this possible? Any input is appreciated!
Thank you
I Ran into similar problem in the past. I was able to overcome it be sorting the data in SQL using case statement before using it as a dataset in SSRS. See example bellow.
;WITH Sort AS
(
SELECT 'Aiden' AS CustomerName UNION
SELECT 'Jackson'UNION
SELECT 'Ethan'UNION
SELECT 'Liam'UNION
SELECT 'Mason'UNION
SELECT 'Noah'UNION
SELECT 'Lucas 'UNION
SELECT 'Jacob 'UNION
SELECT 'Sophia 'UNION
SELECT 'Emma 'UNION
SELECT 'Olivia 'UNION
SELECT 'Isabella 'UNION
SELECT 'Ava 'UNION
SELECT 'Lily 'UNION
SELECT 'Zoe 'UNION
SELECT 'Chloe 'UNION
------------------
SELECT 'Fernando' UNION
SELECT 'Leonard'UNION
SELECT 'Mark'
)
SELECT
CASE WHEN CustomerName = 'Fernando' THEN 1
WHEN CustomerName = 'Leonard' THEN 2
WHEN CustomerName = 'Mark' THEN 3
Else 4 END AS Sort,
CustomerName
FROM Sort
ORDER BY Sort,CustomerName
The proper way to get your expected should be mapping each customer to a corresponding group:
Group Name
Group1 Adam
Group2 Alex
Group3 Dean
Group4 Brian
Group4 Fernando
Group5 Mark
Then in your tablix you can create a group, it will show names in the same group one each other. Also you can get only one balance total by use something like this:
=SUM(Fields!Balance.Value,"Group")
However if you don't want to create a group, you can hardcode the names in a conditional sorting expression:
In your Tablix Properties / Sorting tab add a new soting expression and use:
=Switch(Fields!Name.Value="Brian","Brian1",
Fields!Name.Value="Fernando","Brian2",
true, Fields!Name.Value
)
You will get this:
Let me know if this helps.
Related
I would like to be able to return a single line when the name of some musics are the same or similar, as for example this case:
music with similar names
You can see that the names are the same with an extension like " - JP Ver." or something like that, I would like to be able to group them in one row with the first column incrementing the whole.
My current request to return these lines is as follows:
select count(id) number, name, sec_to_time(floor(sum(duration) / 1000)) time
from track
where user_id = 'value'
group by name, duration
order by number desc, time desc;
I would like to get a result like this
Thank you for reading and responding! I wish you all a good day!
Try:
SELECT COUNT(name) no,
TRIM(SUBSTRING_INDEX(name, '-', 1)) namee
FROM track
GROUP BY namee
Example: https://onecompiler.com/mysql/3xt3bfev6
Use GROUP_CONCAT
Here is a proof of concept script. You can add your other columns. I have grouped by the first 4 letters. You will probably want to use more.
CREATE TABLE track (
idd INT,
nam CHAR(50),
tim INT
);
INSERT INTO track VALUES (1,'Abba 1',5);
INSERT INTO track VALUES (2,'Abba 2',6);
INSERT INTO track VALUES (3,'Beta 1',12);
INSERT INTO track VALUES (4,'Beta 4',8);
SELECT
LEFT(nam,4) AS 'Group',
COUNT(idd) AS 'Number',
GROUP_CONCAT(DISTINCT idd ORDER BY idd ASC SEPARATOR ' & ') AS IDs,
GROUP_CONCAT(DISTINCT nam ORDER BY nam ASC SEPARATOR ', ') AS 'track names',
SUM(tim) AS 'total time'
FROM track
GROUP BY LEFT(nam,4);
DROP TABLE track;
Output
Group Number IDs track names total time
Abba 2 1 & 2 Abba 1, Abba 2 11
Beta 2 3 & 4 Beta 1, Beta 4 20
I am trying to write a quarry in a module for Dolibarr ERP. But module hase a part of code that is predefined and can not be changed. And I need to insert a SUM() function in it that will combine rows with similar id. That i know how to do in a regular MySQL:
SELECT fk_product AS prod, SUM(value) AS qty
FROM llx_stock_mouvement
WHERE type_mouvement = 2 AND label LIKE 'SH%'
GROUP BY fk_product
ORDER BY 1 DESC
LIMIT 26
that gives me what I want :
prod qty
1 13
2 10
BUT module has a predefined unchangeable code :
this part is predefined module writes it himself based on values provider in it:
SELECT DISTINCT
c.fk_product AS com,
c.value AS qty
THIS PART I CAN WRITE IN A MODULES GUI:
FROM
llx_stock_mouvement AS c
WHERE
type_mouvement = 2
AND label LIKE 'SH%'
And this part is predefined:
ORDER BY 1 DESC
LIMIT 26
I would appreciate any help and advice on question is there any workaround that can be done to make my desired and result ampere ? As it would using the first code I posted ?
If you can only modify the bit in the middle box then you might need to use a subquery;
--fixed part
SELECT DISTINCT
c.fk_product AS com,
c.value AS qty
--begin your editable part
FROM
(
SELECT fk_product,
SUM(value) AS value
FROM llx_stock_mouvement
WHERE type_mouvement = 2 AND label LIKE 'SH%'
GROUP BY fk_product
) c
--end your editable part
--fixed part
ORDER BY 1
DESC
LIMIT 26
I am stuck with the following issue. I have 1 table that looks like this:
field_number.. Value
````````````````````````````````
1 ......................... 1
2 ..........................1
3 ......................... 2
4 ..........................2
etc.
I want to group different fieldnumbers and have an average for the value column. So the output should be:
field_number................Value
name(1,2)...................... 1.............. ((1+1)/2)
name(3,4)...................... 2.............. ((2+2)/2)
I have checked previous questions but cannot find any question that covers this issue (I might search on the wrong keywords though). So if this has already been covered my appologies, but any help or a point to a previous answer would be appreciated.
** =============UPDATE============= **
I went through your suggestions but did not get it right. So I am trying to be more specific. I almost have the result I want apart from the fact I want to have a fixed value in one of my columns. I have the following query:
Select
Avg(wp_rg_lead_detail.value),
wp_rg_lead_detail.field_number,
From
wp_rg_lead_detail
Where
wp_rg_lead_detail.field_number In (15, 17, 24) A
UNION
Select
Avg(wp_rg_lead_detail.value),
wp_rg_lead_detail.field_number,
From
wp_rg_lead_detail
Where
wp_rg_lead_detail.field_number In (16, 108, 18)
etc.
This gives me a table with two columns
wp_rg_lead_detail.value................field_number
4.3 (average)..............................15 (first value of av calculation)
What I want is to change the field number (15 in this case) in a fixed value (text). What and how should I add this to the query?
SELECT avg(value) FROM table WHERE field_number in (1,2)
SELECT avg(value) FROM table WHERE field_number in (3,4)
If your table is really this simple, you can also get away with:
select distinct
Value,
count(Value) as '#'
from table_name
group by Value
If you acctually want to group by a range, than you can put the logic of the range in your grouping clause (see this fiddle)
select distinct
avg(Value) as average,
floor(Value),
count(Value) as '#'
from table_name
group by floor(Value)
In the fiddle I used grouping on whole integers, but you can make that as complex as you like (see, for instance, this example)
If you are actually also interested in your corresponding fields, use group_concat() like so
select
Value,
group_concat(
distinct field_number
order by Value
) as fields
from table_name tn1
group by Value
order by Value
output:
Value | fields
---------------------------------
1 | 1,2
2 | 3,4
See this fiddle implemented from this blog post
For a generalized answer.
SELECT CONCAT('name','(',GROUP_CONCAT(field_number),')') AS field_number,
AVG(Value) as Value
FROM table_name
group by table_name.`Value`
Hope this helps.
Hey guys i have did some coding in mysql to add a new line value to a row..
SELECT
babe
FROM
(SELECT
concat_ws(' ', 'assword \n') AS babe,
) test;
When i did like this i get an output like
BABE
assword name
What i need is an output like
BABE
assword
name(this would be below assword)
Is there any mysql functions to do this ??...or can i UPDATE the row ??..
I am a newbie in mysql. Hope you guys can help me out..Thanks in advance..
The statement includes a newline character in the babe column. You can confirm this by using the HEX() function to view the character encodings.
For example:
SELECT HEX(t.babe)
FROM ( SELECT CONCAT_WS(' ', 'assword \n') AS babe ) t
On my system, that Will output:
617373776F7264200A
It's easy enough to understand what was returned
a s s w o r d \n
61 73 73 77 6F 72 64 20 0A
(In the original query, there's an extraneous comma that will prevent the statement from running. Perhaps there was another expression in the SELECT list of the inline view, and that was returning the 'name' value that's shown in the example output. But we don't see any reference to that in the outer query.
It's not clear why you need the newline character. If you want to return:
BABE
-----------
asssword
name
That looks like two separate rows to me. But it's valid (but peculiar) to do this:
SELECT t.babe
FROM ( SELECT CONCAT_WS(' ', 'assword \nname') AS babe ) t
FOLLOWUP
Q: i just wanted to know how to add a new row below the assword ..if u know please edit the answer
It's not clear what result you are trying to achieve. The specification, divorced from the context of a use-case, is just bizarre.
A: If I had a need to return two rows: one row with the literal 'assword' and another row "below" it with the literal 'name', I could do this:
( SELECT 'assword' AS some_string )
UNION ALL
( SELECT 'name' AS some_string )
ORDER BY some_string
In this particular case, we can get the ordering we need by a simple reference to the column in the ORDER BY clause.
In the more general case, when there isn't a convenient expression for the ORDER BY clause, I would add an additional column, and perform a SELECT on the resultset from the UNION ALL operation. In this example, that "extra" column is named seq:
SELECT t.some_string
FROM ( SELECT 'assword' AS some_string, 1 AS seq
UNION ALL SELECT 'name', 2
)
ORDER BY t.seq
As another example:
( SELECT 'do' AS tone, 1 AS seq )
UNION ALL ( SELECT 're', 2 )
UNION ALL ( SELECT 'mi', 3 )
UNION ALL ( SELECT 'fa', 4 )
ORDER BY seq
I'd only need to add an outer SELECT if I needed a projection operation (for example, to remove the seq column from the returned resultset.
SELECT t.tone
FROM ( SELECT 'do' AS tone, 1 AS seq
UNION ALL SELECT 're', 2
UNION ALL SELECT 'mi', 3
UNION ALL SELECT 'fa', 4
)
ORDER BY t.seq
Got this:
Table a
ID RelatedBs
1 NULL
2 NULL
Table b
AID ID
1 1
1 2
1 3
2 4
2 5
2 6
Need Table a to have a comma separated list as given in table b. And then table b will become obsolete:
Table a
ID RelatedBs
1 1,2,3
2 4,5,6
This does not rund through all records, but just ad one 'b' to 'table a'
UPDATE a, b
SET relatedbs = CONCAT(relatedbs,',',b.id)
WHERE a.id = b.aid
UPDATE: Thanks, 3 correct answers (marked oldest as answer)! GROUP_CONCAT is the one to use. No need to insert commas between the ids using relatedids = CONCAT(relatedids,',',next_id) that is done automatic by GROUP_CONCAT.
You'll have to use the mysql group_concat function in order to achieve this: http://dev.mysql.com/doc/refman/5.1/en/group-by-functions.html#function_group-concat
Look into GROUP_CONCAT(expr)
mysql> SELECT student_name,
-> GROUP_CONCAT(DISTINCT test_score
-> ORDER BY test_score DESC SEPARATOR " ")
-> FROM student
-> GROUP BY student_name;
You can't do that in standard SQL. You could write a stored procedure to do that. I had a similar problem, but I was using PostgreSQL so I was able to resolve it by writing a custom aggregate function so that you can do queries like
select aid, concat(id)
from b group by
aid
Update: MySQL has a group_concat aggregate function so you can do something like
SELECT id,GROUP_CONCAT(client_id) FROM services WHERE id = 3 GROUP BY id
as outlined here.