I have installed mysql2 in mac m1 using the below command
gem uninstall mysql2
gem install mysql2 -v '0.3.21' -- --srcdir=/usr/local/Cellar/mysql/8.0.28_1/bin/include --with-mysql-include=/usr/local/Cellar/mysql/8.0.28_1/include/mysql --with-mysql-lib=/usr/local/Cellar/mysql/8.0.28_1/lib --with-cppflags=-I/usr/local/opt/openssl#1.0/include --with-opt-dir=/usr/local/opt/openssl#1.0 --platform=ruby
Installation works but when I starts rails s , I get the below error
/gems/mysql2-0.3.21/lib/mysql2.rb:31:in `require': cannot load such file -- mysql2/mysql2 (LoadError)
I am using Rails 3.2.22.5 and ruby 2.3.0p0 (2015-12-25 revision 53290) [x86_64-darwin21]
I downgraded the openssl to 1.0 to install ruby 2.3.0 using rosetta
I already installed mysql8 using brew install mysql .
Above is working in my another project which is running on Rails 4.2 and Ruby 2.3.1 but dont know why its not working here.
I also tried to downgrade mysql8 to 5.7 and then install mysql2 using the below
gem install mysql2 -v 0.3.21 -- --with-mysql-config=/usr/local/Cellar/mysql#5.7/5.7.37/bin/mysql_config --srcdir=/usr/local/Cellar/mysql#5.7/5.7.37/bin/include --with-ldflags=-L/usr/local/opt/mysql#5.7/lib --with-cppflags=-I/usr/local/opt/mysql#5.7/include --platform=ruby
But same error, installation complete but getting load error in rails s
Any help to fix this error will be appreciated.
I am able to solve this issue by downgrading mysql to 5.7 and then installing mysql-client#5.7
Below are the steps:
#stop mysql
brew services stop mysql
# install mysql5.7
brew install mysql#5.7
#Link mysql5.7
brew unlink mysql
brew link mysql#5.7 --force
# install mysqlclient
brew install mysql-client#5.7
#uninstall old mysql versions if already installed
gem uninstall mysql2
#install mysql2
gem install mysql2 -v 0.3.21 -- --with-mysql-config=/usr/local/bin/mysql_config --with-ldflags=-L/usr/local/Cellar/openssl#1.0/1.0.2u/lib --with-cppflags=-I/usr/local/Cellar/openssl#1.0/1.0.2u/include
Try this way, it's work for me
brew install openssl zstd mysql
LIBRARY_PATH=$(brew --prefix zstd)/lib/:$(brew --prefix openssl)/lib/ gem install mysql2
I am having some problems when trying to install mysql2 gem for Rails. When I try to install it by running bundle install or gem install mysql2 it gives me the following error:
Error installing mysql2: ERROR: Failed to build gem native extension.
How can I fix this and successfully install mysql2?
On Ubuntu/Debian and other distributions using aptitude:
sudo apt-get install libmysql-ruby libmysqlclient-dev
Package libmysql-ruby has been phased out and replaced by ruby-mysql. This is where I found the solution.
If the above command doesn't work because libmysql-ruby cannot be found, the following should be sufficient:
sudo apt-get install libmysqlclient-dev
On Red Hat/CentOS and other distributions using yum:
sudo yum install mysql-devel
On Mac OS X with Homebrew:
brew install mysql
I'm on a mac and use homebrew to install open source programs. I did have to install mac Dev tools in order to install homebrew, but after that it was a simple:
brew install mysql
to install mysql. I haven't had a mysql gem problem since.
here is a solution for the windows users, hope it helps!
Using MySQL with Rails 3 on Windows
Install railsinstaller -> www.railsinstaller.org (I installed it to c:\Rails)
Install MySQL (I used MySQL 5.5) -> dev.mysql.com/downloads/installer/
--- for mySQL installation ---
If you dont already have these two files installed you might need them to get your MySQL going
vcredist_x86.exe -> http://www.microsoft.com/download/en/details.aspx?id=5555
dotNetFx40_Full_x86_x64.exe -> http://www.microsoft.com/download/en/details.aspx?id=17718
Use default install
Developer Machine
-MySQL Server Config-
port: 3306
windows service name: MySQL55
mysql root pass: root (you can change this later)
(username: root)
-MySQL Server Config-
--- for mySQL installation ---
--- Install the mysql2 Gem ---
Important: Do this with Git Bash Command Line(this was installed with railsinstaller) -> start/Git Bash
gem install mysql2 -- '--with-mysql-lib="c:\Program Files\MySQL\MySQL Server 5.5\lib" --with-mysql-include="c:\Program Files\MySQL\MySQL Server 5.5\include"'
Now the gem should have installed correctly
Lastly copy the libmysql.dll file from
C:\Program Files\MySQL\MySQL Server 5.5\lib
to
C:\Rails\Ruby1.9.2\bin
--- Install the mysql2 Gem ---
You will now be able to use your Rails app with MySQL, if you are not sure how to create a Rails 3 app with MySQL read on...
--- Get a Rails 3 app going with MySQL ---
Open command prompt(not Git Bash) -> start/cmd
Navigate to your folder (c:\Sites)
Create new rails app
rails new world
Delete the file c:\Sites\world\public\index.html
Edit the file c:\Sites\world\config\routes.rb
add this line -> root :to => 'cities#index'
Open command prompt (generate views and controllers)
rails generate scaffold city ID:integer Name:string CountryCode:string District:string Population:integer
Edit the file c:\Sites\world\app\models\city.rb to look like this
class City < ActiveRecord::Base
set_table_name "city"
end
Edit the file c:\Sites\world\config\database.yml to look like this
development:
adapter: mysql2
encoding: utf8
database: world
pool: 5
username: root
password: root
socket: /tmp/mysql.sock
add to gemfile
gem 'mysql2'
Open command prompt windows cmd, not Git Bash(run your app!)
Navigate to your app folder (c:\Sites\world)
rails s
Open your browser here -> http://localhost:3000
--- Get a Rails 3 app going with MySQL ---
For MacOS Mojave:
gem install mysql2 -v '0.5.2' -- --with-ldflags=-L/usr/local/opt/openssl/lib --with-cppflags=-I/usr/local/opt/openssl/include
On Ubuntu(18.04)
i was able to solve this issue by running the following:
sudo apt-get install build-essential libmysqlclient-dev
gem install mysql2
reference
Another way for MacOS users
If you used "brew" to install mysql:
gem install mysql2 -v 'x.x.x' -- --with-mysql-config=/usr/local/Cellar/mysql/y.y.y/bin/mysql_config
x.x.x = version of the mysql2 gem you want to install
y.y.y = the version of mysql you have installed ls /usr/local/Cellar/mysql to find it.
I have several computers, 32 and 64 bits processor, they run on Ubuntu Linux, Maverick (10.10) release.
I had the same problem, and for me, the
sudo apt-get install libmysql-ruby libmysqlclient-dev
did the job!!!
Have you tried using
gem install mysql -- --with-mysql-lib=/usr/lib/mysql/lib
to specify the location of thebase directory as well as the path to the MySQL libraries that are necessary to complete the gem installation?
Sources:
MySQL Gem Install ERROR: Failed to build gem native extension
MySQL Forums :: Ruby :: Help needed with installing MySQL binding for Ruby
If you are using yum try:
sudo yum install mysql-devel
This solved my problem once in Windows:
subst X: "C:\Program files\MySQL\MySQL Server 5.5"
gem install mysql2 -v 0.x.x --platform=ruby -- --with-mysql-dir=X: --with-mysql-lib=X:\lib\opt
subst X: /D
On Debian Stretch the package that worked for me was default-libmysqlclient-dev
sudo apt-get update && apt-get install -y default-libmysqlclient-dev
If you are still having trouble….
Try installing
sudo apt-get install ruby1.9.1-dev
In my case this helped:
$ export LDFLAGS="-L/usr/local/opt/openssl/lib"
$ export CPPFLAGS="-I/usr/local/opt/openssl/include"
Then:
gem install mysql2 -v '0.5.2' --source 'https://rubygems.org/' -- --with-cppflags=-I/usr/local/opt/openssl/include --with-ldflags=-L/usr/local/opt/openssl/lib
Result:
Building native extensions with: '--with-cppflags=-I/usr/local/opt/openssl/include --with-ldflags=-L/usr/local/opt/openssl/lib'
This could take a while...
Successfully installed mysql2-0.5.2
Parsing documentation for mysql2-0.5.2
Installing ri documentation for mysql2-0.5.2
Done installing documentation for mysql2 after 0 seconds
1 gem installed
See this post (WARNING: Japanese language inside).
I had this issue on Windows 7. This is apparently an incompatibility issue and the solution is as follows:
Download the libmySQL.dll file from an older InstantRails installer. It is available from the InstantRails GitHub repo.
Next, copy that file into your Ruby/bin folder.
Now, you are good to go ;)
I got this error too. Solved by installing development packages. I'm using arch and it was:
sudo pacman -S base-devel
which installed:
m4, autoconf, automake, bison, fakeroot, flex, libmpc, ppl, cloog-ppl, elfutils, gcc,
libtool, make, patch, pkg-config
but I think it actually needed make and gcc. Error output said (on my machine, among other):
"You have to install development tools first."
So it was an obvious decision and it helped.
You have to Install some dependencies
sudo apt-get install libmysql-ruby libmysqlclient-dev
I can see most of the people have found the solution to this problem, this is mostly coused but not limited to missing packages, this happened to me after I have purged mysql and reinstalled it. I had to run this command in order to fix my problem:
sudo apt-get install libmysqlclient-dev
This command helped me fix my problem
I was running into this error on my mac and found that I needed to upgrade from mysql 32bit to mysql 64 bit to get this error to go away. I was running OSX 10.6 on an intel macbook pro with ruby 1.9.2 and rails3.0.0
I also needed to install xcode in order to get unix utilities like "make" that are required to compile the gem.
once this was done I was able to run gem install mysql and gem install mysql2 without error.
I got the gem built on Mac OS X 10.6.6 by
1) Ensuring the Developer tools package is installed
2) Downloading the current MySQL package (5.5.8 in my case) from Source
3) Installing the cmake tool from cmake.org
4) Following the instructions in section 2.11 of INSTALL-SOURCE from the mysql distribution files
5) sudo gem install mysql2 -- --srcdir=/usr/local/mysql/include
The gem built successfully, but there are two errors in the documentation that rdoc and ri complain about.
But now when I try to require 'mysql2' I get a
LoadError: no such file to load -- mysql2/mysql2
I was hoping the error I would get was that the libmysqlclient.16.dylib couldn't be found because we figured that out in another post (search for install_name_tool).
My $PATH has /usr/local/mysql in it (that's where my source and built files are located), so I'm a little stumped. If anyone has any thoughts, I'll check back after a few hours of sleep.
For windows user:
You set the lib and include path of your mysql, for instance, if youre using xampp you can have like this:
gem install mysql2 -- '--with-mysql-lib="C:\xampp\mysql\lib" --withmysql-include="C:\xampp\mysql\include"'
Solution only works on Mac OS X
If you've installed MySQL with homebrew, what worked for me was uninstalling MySQL, and installing MySQL Community Edition via the MySQL website (https://www.mysql.com/).
After installed, just re-enter the command to gem install mysql2 or if necessary, sudo gem install mysql2, if you are getting permission denied problems.
If still getting error then follow the steps of mysql2 gem installation on Rails 3 on -
http://rorguide.blogspot.com/2011/03/installing-mysql2-gem-on-ruby-192-and.html
where most of the user were able to install mysql2 gem.
After you get the mysql-dev issues corrected, you may need to remove the bad mysql2 install. Look carefully at the messages after $ bundle install. You may need to
rm -rf vendor/cache/
rm -rf ./Zentest
This will clear out the bad mysql2 installation so that a final $ bundle install can create a good one.
download the right version of mysqllib.dll then copy it to ruby bin really works for me. Follow this link plases mysql2 gem compiled for wrong mysql client library
Got the "You have to install development tools first." error when trying to install the mysql2 gem after upgrading to Mac OS X Mountain Lion. Apparently doing this upgrade removes the command line compilers.
To fix:
I uninstalled my very old version of Xcode (ran the uninstall script in /Developer/Library). Then deleted the /Developer directory.
Went to the AppStore and downloaded Xcode.
Launched Xcode and went into the Preferences -> Downloads, and installed the command line tools.
You are getting this problem because you have not install MySql. Before install mysql2 gem. Install MySQL. After that mysql2 gem will install.
I just wanted to add this answer specifically for Mac Users.
My server was running perfectly fine until I updated my xcode. The while starting my rails server the error was shown like this
Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension.
/Users/user/.rvm/rubies/ruby-1.9.3-p448/bin/ruby extconf.rb --with-mysql-
checking for rb_thread_blocking_region()... /Users/user/.rvm/rubies/ruby-1.9.3-
p448/lib/ruby/1.9.1/mkmf.rb:381:in `try_do': The compiler failed to generate an
executable file. (RuntimeError)
And there was suggestion to install mysql2 gem at the end of the error message. So when i tried installing it I got the error as above mentioned in this question. The error I got is as follows
ERROR: Error installing mysql2:
ERROR: Failed to build gem native extension.
So as suggested in this post I tried 'brew install mysql' and that quitted saying that mysql version so and so already installed. But there was warning before it saying
Warning: You have not agreed to the Xcode license.
Builds will fail! Agree to the license by opening Xcode.app or running:
xcodebuild -license
Then I tried this sudo xcodebuild -license and type 'agree' at the end. You have to be root to agree to the license.
After this, I again tried bundle install and then everything is working fine as normal. [ Even due to this xcode updation, I had problem with my tower also.]
libmysql-ruby has been phased out and replaced. New command:
sudo apt-get install ruby-mysql libmysqlclient-dev
Under ubuntu 20.04 LTS it's the only solution that have been working for me:
sudo apt-get install ruby-mysql2
According to https://github.com/brianmario/mysql2/issues/1175 , I fixed it by
gem install mysql2 -- \
--with-mysql-lib=/usr/local/Cellar/mysql/8.0.26/lib \
--with-mysql-dir=/usr/local/Cellar/mysql/8.0.26 \
--with-mysql-config=/usr/local/Cellar/mysql/8.0.26/bin/mysql_config \
--with-mysql-include=/usr/local/Cellar/mysql/8.0.26/include
I successfully installed MySql x86_64 in Snow Leopard and Ruby and Ruby Gems seems to be installed properly:
$ which mysql
/usr/local/mysql/bin/mysql
$ which ruby
/usr/bin/ruby
$ which gem
/usr/bin/gem
$ mysql
Your MySQL connection id is 404
Server version: 5.1.37 MySQL Community Server (GPL)
$ ruby -v
ruby 1.8.7 (2008-08-11 patchlevel 72) [universal-darwin10.0]
$ gem -v
1.3.5
Unfortunatly I get an error installing mysql gem:
$ sudo gem update --system
...
$ sudo env ARCHFLAGS="-arch x86_64" gem install mysql -- --with-mysql-config=/usr/local/mysql/bin/mysql_config
Building native extensions. This could take a while...
ERROR: Error installing mysql:
ERROR: Failed to build gem native extension.
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby extconf.rb --with-mysql-config=/usr/local/mysql/bin/mysql_config
mkmf.rb can't find header files for ruby at /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/ruby.h
Gem files will remain installed in /Library/Ruby/Gems/1.8/gems/mysql-2.8.1 for inspection.
I think you should try to uninstall the old mysql gem first before recompiling
sudo gem uninstall mysql
sudo env ARCHFLAGS="-arch x86_64" gem install mysql -- --with-mysql-config=/usr/local/mysql/bin/mysql_config
Installing the Xcode that's bundled with the Snow Leopard fixed the problem.
For me, it was adding the UNIX Tools option (if I recalled the name accurately), which include the headers. When I installed XCode originally, I didn't include this component because I didn't think that I would be writing UNIX code. Little did I know...
If you've installed MySQL 5 using MacPorts, then use the command:
sudo env ARCHFLAGS="-arch x86_64" gem install mysql -- --with-mysql-config=/opt/local/bin/mysql_config5
I had this problem when I updated to Lion. In this case, I when to the app store and downloaded the latest Xcode. Then I uninstalled and reinstalled the database.
The issue had to do with a broken link during the update. Ruby likes to be in /System while Apple places ruby in /Developer.
was stuck with same problem:
Tried most of the solution's: At the end
Edit the app/config/database.yml, change the adapter to mysql2
production:
adapter: mysql2
database: commissi_production
username: root
password: root
host: localhost
& run on terminal
gem install activerecord-mysql2-adapter
Solved the problem.