I tried out your new feature "xedbug on demand". I stuck to these guides (https://www.jetbrains.com/help/phpstorm/2016.3/configuring-xdebug.html and https://blog.jetbrains.com/phpstorm/2016/06/xdebug-on-demand-for-cli-php-scripts-in-phpstorm-2016-2-eap/).
I see that in the php Server menu when I add the path to the xdebug that PhpStorm recognizes it (the label switches from "not installed" to "XDebugger 2.4.1").
So everything seems to be fine but when I use the debugger via the bug-icon, it never attaches/stops for the breakpoint.
I activated the xdebug-Logfile, but it stays completely empty.
Furthermore I commented everything xdebug-related out in the php.ini.
The xdebug-port is still on 9000 (default).
Any ideas what I can do about it?
Update: I'm using the debugger via phpStorm's "PHP Web Application" and the debug-icon. I'm debugging php files which are executed via an apache vHost.
PS: Checked IntelliJ forum and Stack posts, didn't find anything helpful though...
"Xdebug in demand" option works for CLI debugging only (Run/Debug Configuration of "PHP Script" type; will also work for other CLI-mode configs, e.g. "PHPUnit") be it local or remote.
Quote from the aforementioned introduction blog post:
To use the great new feature, first, you need to disable Xdebug for command line PHP scripts.
That option does not work for web pages served via web browser (e.g. Apache/nginx/IIS) or when just listening for any incoming debug connections (Zero-config approach) where actual debug is initiated outside of IDE.
The reason is very simple: when launching debugger for CLI script, IDE launches your php executable (your configured PHP Interpreter, e.g. php.exe on Windows) with additional parameter (-z: check php --help output or here) that can load such additional extension.
But when you debugging a web page then whole PHP is not controlled by PhpStorm: it's your web server (Apache/nginx/IIS/etc) that communicates with PHP .. and you cannot pass such arguments at this stage.
Related
I am using the "C4 DSL Extension" of VSCode to show previews of my architecture diagrams. The previews are rendered through the WebviewPanel. The source code can be found here: https://gitlab.com/systemticks/c4-grammar/-/blob/master/extension/src/c4-structurizr-preview.ts
It works through a direct connection, but once connected with my corporate network, all requests have to pass through a proxy. VSCode itself handles proxies through the http_proxy and https_proxy variables. However, the WebviewPanel does not seem to take those settings.
The following figure shows an excerpt of the console. You can see, that the request to query the "structurizr-embed.js" failed.
Is this behavior intended? I could not find a setting in VSCode to enable WebviewPanel to request via proxy.
Note: I am using the Linux version of VSCode.
I found a solution by setting the http.proxy variable in VSCode. We are using authentication for proxies and previously I exported the http_proxy environment variable in the form of http_proxy=http://<username>:<password>#<host>:<port>.
However, VSCode expects this variable without credentials: http_proxy=http://<host>:<port>. Now I don't understand where it talks the credentials from, but it works.
I am using PhpStorm on Ubuntu which I'm running on a Hyper-V machine. I'm trying to configure the PhpStorm debugger with XDebug. I've set a breakpoint in my code, but when I click "Start Listening for PHP Debug Connections" in PhpStorm and refresh my page, the debugger never enters my code. The debugger must be doing something because the page in the browser stays loading, until I click Stop in PhpStorm. If I don't click for the debugger to listen for connections, the page loads correctly.
The Debug window shows the error Remote file path '/var/www/magento2/pub/index.php' is not mapped to any file path in project, but I don't know how to get that to map correctly. In the path mappings windows, under "Include path", it shows a bunch of paths, but the path /var/www/magento2/pub isn't there. I can't find anywhere to add an additional path. Could this be a permissions issue for that folder? What permissions do I need to allow PhpStorm to map that path?
If I uncheck "use path mapping" in Preferences > Language & Framework > PHP > Servers and leave "Break at first line in PHP scripts" checked, then the debugger breaks on the first line of code, but I don't want to break until my breakpoint is hit.
If I uncheck "use path mapping" and don't check "Break at first line in PHP scripts", then I get the error Debug session was finished without being paused. It may be caused by path mappings misconfiguration or not synchronized local and remote projects. To figure out the problem check path mappings configuration for 'mydomain.local' server at PHP|Servers or enable Break at first line in PHP scripts option (from Run menu).
Here's my XDebug configuration
zend_extension=xdebug.so
xdebug.remote_autostart=1
xdebug.remote_enable=1
xdebug.remote_handler=dbgp
xdebug.remote_host=127.0.0.1
xdebug.remote_mode=req
xdebug.remote_port=9000
xdebug.var_display_max_depth=-1
xdebug.var_display_max_children=-1
xdebug.var_display_max_data=-1
xdebug.idekey="PHPSTORM"
Update:
Here are the responses to #LazyOne's questions
1) The path to the project root is /var/www/magento2
2)
One thing here which I think may be related to the problem is that under Include Path, the /var/www/magento/pub directory is not shown. That's what PhpStorm is referencing on that first error I described above. It's like PhpStorm found some of my directories with PHP files, but not all of them.
3) Here is the XDebug log
Update 2:
Here is what my project looks like
Here is my Directories window
I'm assuming that the reason that all the vendor/... directories are under Excluded Folders is that they are in .gitignore. Some of the code that I'm setting a breakpoint in is in a subdirectory of one of the vendor directories and some of the code is in a subdirectory of app/code/ (which is under Source Folders)
I added /var/www/magento2/pub to the Include Path under Settings > Languages & Frameworks > PHP. That eliminated the error about /var/www/magento2/pub/index.php. Now it's partially working. If I have PhpStorm break on the first line of PHP scripts, the debugger does start as soon as I refresh my page. However, after I step over the first line of code, I get the error PHP CS Fixer: Can not correctly run the tool with parameters... and then the debugger seems to stop working.
If I don't select Break at first line in PHP Scripts, and I put a breakpoint further into my code, I still get the same "debug session was finished without being paused" error.
I'm not sure what PHP CS Fixer is, nor do I want it to run. Is there a way to disable that?
I've been trying to follow the
Setting Up Stackdriver Debugger for Java applications on Google Compute Engine, but am running into issues with Stackdriver Debug.
I'm building my .war file from a separate build server, then deploying it to my GCE server. I added the agent to the start command via /etc/defaults, and my app appears in the https://console.cloud.google.com/debug control panel. The version I set in the run command matches the revision that shows up in the source-context(s).json files.
However when I click open the app, I see the message that
No source version information was provided by the deployed application
I connected the app's git repo as a mirrored cloud repository, and can browse the source files in the sidebar of the Stackdriver Debug page. But, If I browse to a file and add a breakpoint I get an error that the error "File was not found in the executable."
I have ran the gcloud preview app gen-repo-info-file command, which created two basic json files storing my git repo and revision. Is it supposed to do anything else?
I have tried running jetty using both normal and extracted modes. If I have jetty first extract the war file, I can see the source-context.json filesin the WEB-INF/classes directory.
What am I missing?
https://github.com/GoogleCloudPlatform/cloud-debug-java#extra-classpath mentions
you can update the agentPath showing your WEB-INF/class directory.
-agentpath:/opt/cdbg/cdbg_java_agent.so=--cdbg_extra_class_path=/opt/tomcat/webapps/myapp/WEB-INF/classes
For multiple class paths:
-agentpath:/opt/cdbg/cdbg_java_agent.so=--cdbg_extra_class_path=/opt/tomcat/webapps/myapp/WEB-INF/classes:/another/path/with/classes
There are a couple of things going on here.
First, it sounds like you are doing the correct thing with gen-repo-info-file. The debugger agent should pick up the json files from the WEB-INF/classes directory.
The debugger uses fuzzy matching to find source files, so as long as the name of the .java file matches a file in your executable, you should not get that error.
The most likely scenario given the information in your question is that you are attaching the debugger to a launcher process, rather than your actual application. Without further details, I can't absolutely confirm that, though.
If you send us more details at cdbg-feedback#google.com, we can look more closely at your case to see if we can understand exactly what's happening, and potentially improve our documentation, since it sounds like you followed the docs pretty closely.
I build and run my typescript application by Grunt and connect(grunt-contrib-connect) and livereload plugins. While grunt compile .ts files, it also generate sourcemap. My application is oppening on google chrome. How can I remotely connect by Intellij Idea to this application that was run by Grunt and oppened in Chrome for perform debug?
This post is my last hope, that it is possible. Thanks
create a new javascript debug run configuration
in URL field, specify the URL of your client app (http://localhost:9001/index.html or whatever it looks like)
if your local project structure doesn't exactly match the app structure on server (for example, static files are served from <project_root>/public folder), specify remote URL mappings (see http://confluence.jetbrains.com/display/WI/Starting+a+JavaScript+debug+session#StartingaJavaScriptdebugsession-Startingadebugsessionwhenusingadifferentwebserver)
that should be enough... Start grunt, and, when the server is up and running, debug the configuration above
Thank you. I found solution.
First of all, I need Jet Brains extension for Chrome.
I need to make configure debug mode "JavaScript debug" and specify URL that grunt will run and open application.
Run Grunt task that build and open application in browser.
Run debug mode that just reload same page under debugger already.
Don't forget enjoy it.
Since I use typescript, ability to debug in IDE was very important.
I am using behat+mink. I wrote some features and am now running tests.
How can I enable xdebug to to stop on breakpoints in phpstorm when running behat tests ?
I have not tried this with Mink yet, but this is configuration that allows me to step through debugging of behat (with behat running on a remote server):
Configure your server with x-debug
Of note, since this is commandline, you need to edit the cli config under /etc/php5/cli/conf.d/20-xdebug.ini.
Set remote_host to the ip of the computer you're using PHPSTORM from
Set autostart = 1
Disable connect_back, you will initiate debugging from the server so there is nothign to connect back to
You can also do this without editing your ini by exporting values as env variables, just remember to do this each time you start a new shell (or add to your .bash_profile file):
export XDEBUG_CONFIG="remote_host=<YOUR IP>"
Configure PHPStorm's Debugger
It seems by default, PHPStorm doesn't understand remote-cli scripts, so we need to add a configuration that tells it to expect a CLI script to trigger xdebug
Open the Run Menu and select "Edit Configurations"
Click the Green "+" to to add a new configuration and select "PHP Remote Debug"
Name the Configuration (E.G. MyServer-Behat)
Under the Servers: menu, select your remote server.
If you haven't configured your remote server yet, then do this by clicking the "..." button on the right
Click the Green "+" to add a server configuration. Give it a name (E.G. MyServer) and fill in it's address under Host
Configure it's Path Mappings. This is important if the path to your source files is different on your PHPStorm computer from your server. You can see in my example that i'm relating my local checkout (~/Work/Symfony/) to my server install (/var/www/). I specifically added mappings for src, bin, web, app, and vendor by clicking in the space to the right under "Absolute path on the server" and typing in the path. I had issues just mapping the root's, so I had to add these paths to get my debugger to work.
Debug!
Once that is setup, select your configuration from the drop down in the debugging tool bar and click the bug icon (you can also use the Run menu) to start the debugger listening. This is similar to the default Telephone Button (circled in yellow), but it tells PHPStorm to use your new configuration.
Now simply run behat like you normally would from your server and your debugger should connect and stop on any breakpoints you've placed.
If you're having doubts about if it's working or not, try toggling the "Break on First Line" in the Run menu, as this should make the debugger break immediately when you run behat (in the bin/behat file)