Hey all,
I'm new to linux and still learning and I've searched and haven't been able to find the exact same issue anywhere......
I have a CentOS remote server hosting approximately 60 websites. Some just html, others custom scripts, and mostly wordpress.
I want to backup ALL the sites to my local Ubuntu 16.04.1 lamp stack server.
I am using Filezilla and I'm assuming it's not downloading the the /var/www folder because of permissions, but again, I'm new and don't know much.
Questions:
Do I need to change some settings in Filezilla?
Can I download them with terminal but in bulk?
I do understand I will have to grab all the databases and install them locally, separately, but are there any programs that could help automate this process, paid or free?
Related
We're running a local server for database management, it's old software, but works. A replacement is incoming, but not ready yet.
I've had to learn to manage it all in pretty quick time, so I'm very much a beginner.
Overview:
The database is running in Sequel Pro 1.0.2 (MySQL 5.5.34).
The main interface is via a custom site in PHP.
The server is run via MAMP 3.0.5.
The system is Mac OS 10.10.5 as this is the last version of Mac Server with the VPN that we can use for remote access to the site.
I also have a cloned version of the system off-site for when the main office internet goes down and we still need access to the site/database, and the entire MAMP folder is being automatically backed up.
Problem
I've found all the database files in MAMP>db>mysql, however I've noticed that the .MYI and .MYD files are only modified when MAMP is stopped.
This means the backup files are always out of date.
If I manually create a new view directly within Sequel Pro, then the files get updated.
For example, in the Sequel Pro database, I can see the latest item created was on the 15th (today) at 09:13, but the .MYI/.MYD files show last modified yesterday at 08:47.
Is there a way I can get the database files to update automatically without needing to manually stop the MAMP server so that the backup is current?
Again, very much a beginner with this so any advice is appreciated.
Thanks!
I have very strange issues
I have developed yetiforce crm in local system and migrated to globehost sever .
the mysql version is 5.6 in local and hosting server but my login does not work
in hosting server what could be the possible reason.
Regards
I got the solutions, it had to do with the permission of the files, the directory should be 755 and files had to be 644, some of the files had different permission which was causing the problems
I have downloaded the MySQL from the following link:
http://dev.mysql.com/downloads/mysql/
Downloaded the version 8.0.0. I have OS X 10.10.5
Now, I suppose I need to configure a visual MySQL client on my laptop to write queries. For that, I have installed sequelpro (sequelpro.com).
I need help on following points:
- Since there are a number of sample databases which one can use to learn SQL, can you please guide me on few such databases. My objective is to learn advanced SQL.
- Also, how do I configure my client (sequelpro) to connect to that database so that I can run queries.
As of now, I am stuck with the following screenshot with no clue what to do next.
Thanks a lot. Screenshot here
Based on the fact you said in the comments you have OSX and you installed mysql manually without phpmyadmin I suggest you download and install mamp.
mamp
1: https://www.mamp.info/en/ is,
MAMP installs a local server environment in a matter of seconds on
your computer. It comes free of charge, and is easily installed. MAMP
will not compromise any existing Apache installation already running
on your system. You can install Apache, PHP and MySQL without starting
a script or having to change any configuration files! Furthermore, if
MAMP is no longer needed, just delete the MAMP folder and everything
returns to its original state (i.e. MAMP does not modify any of the
"normal" system).
Basically it is a fake server that runs on your computer. This will be yours for localhost development. You can use it to serve your localhost php applications, change versions of php and gives you a GUI for mysql which is phpmyadmin.
Once you install mamp
you might need to configure mamp to use the mamp mysql but most likley it will work out of the box. If you do run into any problems make sure you stop the instance of mysql you installed already before running mamp then trying to ran mamp again and it should be using the correct version.
At first, I use Struts 2 to develop a website in Java web technology. So I installed Apache Tomcat as the localhost server and MYSQL as the database (MYSQL here is the full application from mysql.com, not the packages like XAMPP or WAMP...)
But now I switch to learn a little bit about PHP so I install WAMP full package. When I start all services of WAMP and go to browser and type localhost, everything work fine
But when I go to localhost/phpmyadmin, it seems to connect to the old MYSQL application in my computer (what I've used in Java web). And then I restart computer and use MYSQL Workbench (in the MYSQL application), but now it connects to the database of WAMP package, and I can not connect to the old database (in Java web) anymore
The solution is remove WAMP but I need WAMP for PHP
So I just want to ask how can I use MYSQL application and WAMP package together (MYSQL application for Java web and WAMP package for PHP)?
Thank you and apology for my bad English!
Go to C:\Program Files (x86)\MySQL\MySQL Server 5.1 and open my (Configuration file) and then navigate to
[client]
port=3306
Change this to
[client]
port:3307
This will make phpmyadmin to run on 3306 and Java-Mysql to run on 3307
You can of course keep both XAMPP and WAMP running together keeping in mind that you have changed the default ports for either of it to some other ports rather than 80,443 and 3306, but sometimes it could create conflict as when you install some other third party softwares or enable certain services that run on port 80,443,3306.
The best alternative here would be to install one of the servers inside a virtual machine with network configured as "host-only-adapter" so that from the base machine you could access XAMPP/WAMP installed on the virtual machine by just pointing the ip-address of the virtual machine through a web-browser.
or,
If you want to run both XAMPP and WAMP together on the same machine but access only one of the servers at a time then you could go ahead installing both of them one after another. But, keep in mind that before installing the other server you have to completely stop all the services running from the XAMPP or WAMP control panel then quit the application. After this step you can go ahead installing the other server without changing any configurations or port numbers. This is because in this case we assumed that only one of the servers would be accessed at a time. Hence, before launching the other server one has to completely quit the application that is running currently by stopping all of it's services. If skype is installed then one has to change the default incoming connection ports to other than port 80 and 443.
Like mentioned above, if at all the intention is to access both servers up and running concurrently then taking advantage of a virtual machine would be the best to avoid conflicts and a long-term troubleshoots eventually.
If you messed up changing ports and config files then you could end up with the following error while trying to access phpmyadmin from XAMPP control panel:
**mysql said: Cannot connect: invalid settings. xampp**
note: while launching the servers , run it as administrator else some services will not start properly.
"I TRIED INSTALLING BOTH XAMPP AND WAMP ON WINDOWS 10 AS SUCH AS POINTED BY MANY THREADS I CHANGED THE DEFAULT PORTS FOR MYSQL & APACHE XAMPP AS IT WOULD CONFLICT WITH WAMP ALREADY INSTALLED ONLY ENDING UP UNABLE TO ACCESS PHPMYADMIN FROM XAMPP CONTROL PANEL. THEN REINSTALLED XAMPP WITHOUT CHANGING ANY CONFIGS OR PORTS. STOP THE WAMP SERVICES, QUIT THE APP AND THEN LAUNCH PHPMYADMIN FROM XAMPP CONTROL PANEL. AT LAST IT WORKED!. THE PROCESS LOOKS SHORT THOUGH WHEN IN REALITY IT TOOK ME COUNTLESS HOURS AND PAIN RESEARCHING ON THE WEB AND TESTING FOR A POSSIBLE SOLUTION UNTILL I CAME UP WITH THIS."
Hopes, this quick tips and guides would be helpful.
Extended title: How to setup a box with (Windows7 + Apache + VisualSVN + MySQL + PHP) and 3 machines with (MacOs/Windows7) and Dreamweaver CS5 as a web development environment for a small team
These are my thoughts. Please forgive my ignorance, I still don´t have completly clear all the concepts.
1. I need to setup a web development environment for a small team of 3 web developers. The staging and live environments will be in a remote server under an external hosting company (probably Amazon).
2. Our first project is a blog with Wordpress
3. I've installed XAMPP in the box and can be accessed like this (http://dev.company.com/xampp)
4. I've installed Wordpress and can be accessed like this (http://dev.company.com/blog)
5. I've installed VisualSVN in the box and can be accessed like this (http://dev.company.com:8080/svn)
6. I don´t know how to import files for the first time to my repositories in the box (c:/repositories/blog)
7. VisualSVN includes Apache. I don´t know if I should turn off the Apache of XAMPP or if should install another version of VisualSVN without Apache
8. I don't know if I should keep my repositories at C:\repositories or c:\xampp\htdocs.
9. I've read something about hooks? to copy the files from the repositories to the htdocs? Can anybody explain this process?
10. Would it be a good option to keep all the files always in the box? or it is a better option to check out the files to the machines?
11. When setting up Dreamweaver to connect to the SVN Server, do I have to point to the trunk, branch or the name of the repository? Do I have to setup a different connection for each branch?
12. How can we include images and PSD's in the repositories?
When we start a new project we usually just checkout files on clients and commit the changes to the server when finished editing. This way people can just edit files on their own machine (without other users slowing stuff down).
Can't you just do a Linux install for the webserver (CentOS or something like that?). Windows 7 seems so heavy / unfitted for webdevelopment server.
We usually keep the repo out of the webroot.
XAMPP really???
Just my two cents...
It's strongly not recommended to use Apache HTTP server bundled to VisualSVN Server for anything else than Subversion server. So you have to install VisualSVN Server and XAMPP.
Just keep repositories in C:\Repositories. If you move them to htdocs all repository will be accessed for everyone who have access to XAMPP.
Common practice is to checkout working copy to htdocs folder, configure permissions to deny access to .svn and then run svn update in post-commit hook in VisualSVN Server.