I'm developing a website on my local machine using myblog.local as a custom domain for that, I have an apache VirtualHost and the name registered on the hosts file of my mac. The thing is when I try to use chrome remote debugging on my USB connected device using myblog.local as an address pushed using the chrome://inspect tool.
I always a not found error.
My question is, do I need to do something extra in order to remotely debug a custom domain registered on my Mac?
Check out Map to custom local domains.
I got it set up once to work with custom local domains, but it took a bit of experimenting. I definitely needed a proxy server to get it working.
I had exactly the same problem on a PC. I followed #Kayce Basques' Map to custom local domains guide and after some perseverance everything is now working.
Kayce's guide requires a proxy server, I've included my working configuration for the Squid open source and free proxy server below.
Squid installation was easy, I just downloaded and installed a pre-compiled Windows binary file and the server appeared in my Windows system tray. It should hopefully be equally simple for OSX and Linux platforms.
All configuration is done inside a squid.conf file accessible from the Squid menu. I followed this simple guide for a Reverse Proxy. Whilst I included everything in that guide I believe the following line is the critical one to get everything working.
cache_peer 192.168.0.2 parent 80 0 no-query proxy-only originserver
In the above line 192.168.0.2 is my PC's internal IP address and 80 is my Apache virtual host port number defined in my Apache Virtual Hosts file. There's another helpful guide here but that guide omits the originserver option and didn't work on my machine though otherwise helpful.
It seems you do need to be connected by USB cable for this to work so I don't quite understand #asolenzal's comment above. Also each time I changed the configuration I ran Path/to/squid.exe -k reconfigure -n Squid in a command window to reload Squid. You can find that command here.
Related
I have an R script that uses Plotly Dash to create a web page. I am running the script on a VM instance in GCP which is a Ubuntu server without GUI. When the script is executed, it says,
start 127.0.0.1:8050
My question is how to access this web page on a browser from anywhere. Since the VM doesnt have a gui/browser I cannot even test my web page..
Anyone could explain what I am missing here or any way to deploy my web page and access from anywhere?
I am unsure how your application works, but that ending line shows that the server is running on localhost and on which port is it serving. So you may want to access from an external browser with the instance's ip address: like http:// xx.xxx.xx.xx:8050 and let's see if it works. Otherwise you may need to set up a Remote Desktop Setup through Chrome to enable a GUI interface on the VM.
Also remember to make sure that traffic is allowed on that port 8050 checking /creating the firewall rules
I encountered the same problem. You need to change the IP address on which the dash server is running to the internal IP address of your gcp VM instance. It usually starts with 10.xxx.x.x. You can find this internal address in the 'IP address' tab in the VPC networks section on the google cloud console. So do this:
app.run_server(host='10.xxx.x.x', port='8050')
Open a browser and browse to http://externalip:8050. Make sure you have your firewall rules set up correctly.
You should now be able to see the dash app.
I'm currently trying to develop a cloud in my pc using virtual box. The idea is that I have 2 virtual machines, one which devstack installed (all in one) and the other with osm mano. Right now both have everything installed. Hence, I can log in to mano via user and password 'admin' as well as to devstack.
Current properties:
VM1 (devstack): IP (enp0s8) -> 192.168.56.101
Login to 192.168.56.101 -> correct
VM2 (mano): IP (enp0s8) -> 192.168.56.105
Login to 192.168.56.105 -> correct
As some of you may guess, I have 2 network interfaces in every vm, the first one being NAT (enp0s3 with 10.0.2.15 IP) and the second one being Host Only (192.168.56.x according to virtual box).
Needless to say, I can ping from one virtual machine to another without any problem.
Now, in the past I've being using devstack (ubuntu 18.04) in order to play with it a little bit, learn how to deploy instances, create groups and so on. Indeed, I developed a topology with an instance as a router and nagios as the monitoring tool system. It worked and I learnt a lot!
Anyway, what I want in this case is starting from scratch (scratch meaning having downloaded mano and devstack but without going further). So here I am, trying to integrate OSM with Devstack, making use of osm-vim command as it is:
osm vim-create --name openstack-site --user admin --password my_openstack_password --auth_url http://192.168.56.101:5000/v3 --tenant admin --account_type openstack
In this case, my openrc file (downloaded from horizon) resulted in my auth_url being:
export OS_AUTH_URL=http://192.168.56.101:5000/v3
What I'm trying to get my head into is how it's possible that this doesn't work, as whenever I log-in to mano web interface (after osm-vim command) I go to VIM accounts and operational state equals to "error".
Any kind of help would be much appreciated, as I've being struggling for a week now.
Thanks in advance!
I had the same problem. At the beginning I thought It was a network problem, but finally I found out It was due to a SSL problem. The most easy solution is to put a specific flag to avoid the SSL verification until the developers fix it. "--config '{insecure: True}'"
I also encountered this problem when I finished installing OSM-10 and OpenStack-Ussuri for Ubuntu18.04 some days ago. I solved this problem by change the url "--auth_url http//:192.168.23.18:5000/v3" to "-- auth_url http//:controller:5000/v3" and put "192.168.23.18 controller" in the ro container "/etc/hosts". The "controller" here is the host name where you install your openstack and which is used is your keystone authentication urls. Maybe you also have solved this problem but this problem is so troublesome and I hope more people do not be annoyed at this~
I sort of make shift followed this guide on how to setup remote debugging. Since I am using Adobe Animate to compile my app I assume it has done the majority of the build steps already as I get a similar screen described.
I don't understand though. Here I have port forwarding up on my router so that it goes to my PC. I have TCP port 7935 up and open. Windows firewall on or off doesn't seem to make difference. Windows firewall even prompted me to allow or deny fdb after I ran it. I can't get my phone to connect via remote debugging. I want to be able to send this to my client who is having issue with the app so I can see what's going on under the hood instead of relying on a giant sum of try/catch statements and screenshots. Any help?
I tried a dummy domain and it seems to know that it can't connect to it. When I try mine or my IPv4 it doesn't let me connect. It just freezes up the app.
I don't know whether it works or not in Animate CC, but it works via Flash Builder. I'm using Android real device and I have Android SDK tools installed on my PC
Yes, I have followed that tuts from official Adobe docs, but that doesn't work
First: Simply connect your device to your PC
Actually , you can debug your app remotely as long as your device has been connected with your PC. This step, doesn't necessarily requires FDB.
In my case , all I need was things like
adb connect 192.168.xx.xx:port
this will connect your Android device with your PC on your default network .
Second, set debug setting over network
You've done it in Animate CC, with addition you might want to check "install application on the connected device'
Third, just debug as usual
You can get all those debugging stuff including traces
Some FTP clients, such as Transmit, offer an option to simulate the synchronisation between a local and a remote directory. Basically what it means is, that you get a list of files that would be changed, instead of actually moving the files.
I was hoping to find such an option in PhpStorm's Remote Host Plugin, but I searched for it to no avail. Did I overlook something, or does this not exist (yet)?
PHPStorm can sync with the deployed version if the remote host has been configured. It shows the difference and you can select what to do with each file. See PHPStorm Documentation
I have a multi-tenant website that has to take care of any incoming request and determine the appropriate routing by the URL subdomain.
I set up the subdomain routing using this or a similar solution.
However I'm trying to access my website on my local machine using subdomains an alias website. I'm unable to get my local IIS to port to my website with the subdomain I've specified.
I want to dedicate a virtual domain name in my local machine that will port to the website I'm debugging on VS (localhost:23456).
I've read some answers of identical questions (like this or this one), but it looks like the system has changed with the new IIS and Visual Studio 2015 and ASP.NET 5 MVC 6 (vNext) project configuration.
Here's what I've tried according to the answers linked above:
I tried setting the hosts file porting www.myexample.com to 127.0.0.1 but I get a "Bad request" error when navigating to www.myexample.com:23456 in my browser, and anyway the debugger doesn't report a request.
I tried setting <binding protocol="http" bindingInformation=":23456:www.myexample.com" /> in the applicationhost.config file, gets IIS to raise an error saying "Replace hostname with localhost. Any other bindingInformation not specificying localhost as the website raises that IIS error.
Update
After opiants answer
I knew about the .vs folder and that's were I was configuring the bindings indeed.
However, looks like it was the permission that caused IIS to throw errors.
Running that netsh command solved the issue. And BTW, since I'm only running it my own machine, I'm not gonna need to open the firewall.
Anyway my question is if there is a way to add a wildcard instead of each subdomain separately? Since each tenant gets a unique subdomain, the whole process of adding subdomains is going to be dynamic by nature. I need to allow an asterisk in all the 3 places:
hosts file
applicationhost.config file
netsh command
It looks like I can add the asterisk in those places but it doesn't actually work.
I'm guessing you're using IIS express locally?
If so, in your solution directory, there is a .vs folder. You need to add the binding in the \config\applicationhost.config file inside that folder. Then make sure that you've allowed IIS express to listen to that subdomain.
You can refer to Scott's article on how to configure IIS Express. Specifically look for this paragraph "1. GETTING IIS EXPRESS TO SERVE EXTERNALLY OVER PORT 80"
To be more specific, you need to run these commands:
netsh http add urlacl url=http://{your-domain}:{custom-port}/ user=everyone
netsh firewall add portopening TCP {custom-port} IISExpressWeb enable ALL