i try to install mysql server 5.7 in my beaglebone black with OS Debian Jessie, i following this instruction http://dev.mysql.com/doc/mysql-apt-repo-quick-guide/en/#apt-repo-setup . but when i using apt-get update, it always give me an error.
W: Failed to fetch http://repo.mysql.com/apt/debian/dists/jessie/InRelease Unable to find expected entry 'mysql-apt-config/binary-armhf/Packages' in Release file (Wrong sources.list entry or malformed file)
This error is make me insane, i try to using apt-get clean, deleting mysql.list but still give me that error.
Really appreciate if you can help me, thanks.
I guess this means that this repository doesn't provide ARMv7 hardfloat builds of packages. Probably only meant for i386 and AMD64 machines.
You could install mySQL 5.6 from jessie-backports if that version is enough for your needs. If you need 5.7 you'd either need to rebuild packages (very slow) or dist-upgrade to Debian SID (beware, can be unstable).
Related
This question has been asked before here (404 error when using brew to install mysql), but unfortunately the fix doesn't work for me. I have already ran brew update, so I'm up to date.
I'm on the latest version of MacOS 10.12 and I am running Xcode 8 if that matters.
brew install mysql
Warning: You are using OS X 10.12.
We do not provide support for this pre-release version.
You may encounter build failures or other breakages.
==> Downloading https://cdn.mysql.com/Downloads/MySQL-5.7/mysql-boost-5.7.11.tar.gz
curl: (22) The requested URL returned error: 404 Not Found Error:
Failed to download resource "mysql" Download failed:
https://cdn.mysql.com/Downloads/MySQL-5.7/mysql-boost-5.7.11.tar.gz
I know it says this is a pre-release version, but is there any hope here?
Thanks
The 5.7.11 mysql download you reference no longer exists (it certainly is 404).
Looking at the homebrew formula for mysql, it has been updated to point to the latest mysql version.
So it seems that you are not in fact up to date. Try running brew update twice, then brew doctor and fix any warnings.
There have been some big changes in homebrew over the last 9 months, if you have an old install it might be easier to uninstall totally. There are also several ownership and directory location changes that need to be straightened out with the upgrade to homebrew 1.0
I followed the steps laid out here: Brew Update not working after mac 10.9
In case that's not visible anymore, here's that answer:
cd `brew --prefix`
git fetch origin
git reset --hard origin/master
After that, you should be able to brew update and then brew install mysql
For those who are still struggling to resolve this.
Please try:
brew update-reset
brew update
I found this gem here.
P.S.: If you have a shallow clone, after brew update-reset command, run the following command to unshallow:
git -C /usr/local/Homebrew/Library/Taps/homebrew/homebrew-core fetch --unshallow
I'm on a 64-bit Amazon Linux machine.
I had previously installed mysql-server 5.5. (using sudo yum install)
However, I soon found out that my application requires MySql-serve 5.6.
So I uninstalled mysql-server 5.5. (using sudo yum remove mysql-server) and now I'm following these instruction to install mysql-server 5.6.
But I'm running into a problem.
when I try to do the second install, I get the following 2 errors:
file /usr/lib64/mysql/libmysqlclient.so.18 from install of mysql-community-libs-5.6.14-3.el6.x86_64 conflicts with file from package mysql55-libs-5.5.46-1.10.amzn1.x86_64
file /etc/my.cnf from install of mysql-community-server-5.6.14-3.el6.x86_64 conflicts with file from package mysql-config-5.5.46-1.10.amzn1.x86_64
Why on earth am I getting these two errors? How do I fix them?
I removed mysql-server-5.5, so why is it conflicting with 5.6?
I did ls on /etc/my.cnf and /usr/lib64/mysql/libmysqlclient.so.18 and the files don't even exist!! If the files don't exist how can they be conflicting with other files?? Who can help explain this?
PS, I tried #msknapp's explanation here: Can't install MySQL 5.6 by RPM, however I don't know what to do after step #1 to install the rpm. I think that step is left unstated.
mysql-server (of whatever version) depends on other packages ( in your case mysql-community-libs mysql-community-server)
When it is installed in the first place with the old version this stuff is installed. When you "uninstall" mysql-server these dependencies are NOT removed.
When you try and install the new version these still existing packages will conflict with the new package. It does not matter if the actual files in the package are there, it is the package and it's listing of what to expect that conflicts.
To resolve your problem figure out what the dependencies of mysql-server were and uninstall them before attemping the install.
This answer https://superuser.com/questions/294662/how-to-get-list-of-dependencies-of-non-installed-rpm-package may be of interest for working out what mysql-server depends on
I'm trying to install MySQL in my CentOS 6.4 (X86_64) with the command:
"yum install mysql mysql-server"
And I'm having problems with the installation, the error presented is the following:
Check the error log in the following link http://pastie.org/10022423
Any Idea why this error ? thanks for you helps!
The problem is you already have a version of some MySQL packages installed that are from a different distribution/vendor than CentOS.
Since different people created the packages using different names and standards, yum does not know how to fix this situation.
You have libmysqlclient16-5.1.69-1.w6.x86_64 installed already providing the client libraries, but the CentOS package is mysql-libs. This package appears to be provided by "webtatic":
https://webtatic.com/packages/mysql55/
http://rpm.pbone.net/index.php3/stat/4/idpl/21966562/dir//com/libmysqlclient16-5.1.69-1.w6.x86_64.rpm.html
Likely you need to consider removing the libmysqlclient package and installing mysql-libs in it's place. That will probably remove some items because of dependencies, you might be able to get away with manually removing it with the rpm --nodeps -e, but it may also be the packages cannot have their dependency satisfied by mysql-libs so slightly risk move if you don't fully check everything first. This often works, though.
As an alternative looks like you can install the mysql server package from webtatic as well, based on their instructions here, that might be a less complex alternative if you are happy to continue relying on their repository:
https://webtatic.com/packages/mysql55/
As far that I know, that error will shows up when you attempt to install packages that already have been installed before. So, you probably should reinstall your mysql.
Source : https://www.centos.org/docs/5/html/5.1/Deployment_Guide/s3-rpm-conflicting-files.html
I'm trying to get Sphinx (and thinking Sphinx working). It have worked before - but it stopped working tonight after my colleague installed Node, php and some other stuff.
It first complained about a locked pid file:
FATAL: failed to lock pid file
After this I tried to reinstall Sphinx:
brew uninstall sphinx
And:
brew install sphinx.
I already have mysql so I skipped --mysql. This results in the following:
This is not sphinx - the Python Documentation Generator.
To install sphinx-python: use pip or easy_install,
Sphinx has been compiled with libstemmer support.
Sphinx depends on either MySQL or PostreSQL as a datasource.
You can install these with Homebrew with:
brew install mysql
For MySQL server.
brew install mysql-connector-c
For MySQL client libraries only.
brew install postgresql
For PostgreSQL server.
We don't install these for you when you install this formula, as
we don't know which datasource you intend to use.
When running searchd I get this:
FATAL: no readable config file (looked in /usr/local/Cellar/sphinx/2.2.6/etc/sphinx.conf, ./sphinx.conf).
And when trying to start thinking-sphinx for my rails app I get:
Failed to start searchd. Check the log files for more information.
And the log file still says:
FATAL: failed to lock pid file
I'm not sure what is causing this, or how I can fix it. Thought that reinstalling Sphinx would be enough - but I'm stuck at square one.
Any ideas on how I can get it to work again?
How about uninstalling sphinx and giving this a go:
brew install sphinx --pgsql --mysql
I am trying to install a software which required MySQL-server, MySQL-client installed on the server so now I want to install MySQL-server and MySQL-client using rpm files "MySQL-server-5.5.17-1.rhel5.x86_64.rpm" and "MySQL-client-5.5.17-1.rhel5.x86_64.rpm".
I have installed MySQL-client but when I try to run mysql-server
*rpm -i MySQL-server-5.5.17-1.rhel5.x86_64.rpm*
it's showing error:
*error: Failed dependencies:
MySQL conflict with mysql-5.0.77-4.el5_6.6.x86_64
MySQL conflict with mysql-5.0.77-4.el5_6.6.i386
MySQL conflict with mysql-server-5.0.77-4.el5_6.6.x86_64*
So how can i solve this problem?
the error given by you *error: Failed dependencies:
MySQL conflict with mysql-5.0.77-4.el5_6.6.x86_64
MySQL conflict with mysql-5.0.77-4.el5_6.6.i386
MySQL conflict with mysql-server-5.0.77-4.el5_6.6.x86_64*
It clear show that the machine you are going to install mysql 5.5 rpm have mysql 5.0.77 installed .
to resolve this problem .
1. you take backup of datadir and my.cnf (if you are using mysql 5.0 db server earlier).
2. remove all mysql 5.0 server packages , to remove these package you should knew what are the packages already installed on machine
to view all mysql package already installed use rpm -qa | grep -i "mysql*" this command show what package is already installed on machine
now you have to remove all package which name shows in above command.
to remove a package/rpm use rpm -e mysql-5.0.** if show error then use
rpm -e --nodeps mysql-5.0.**
we have to remove all packages one by one by using rpm -e .
after successful remove all older version of mysql , now start installation of mysql-5.5*** packages by using rpm -ivh mysql-5.5***.rpm.
First question - is the version of MySQL already installed actually in use or was it simply there as a result of a fresh CentOS install? If the former, try upgrading rather than installing. If the latter, uninstall the old version (possibly using the --no-deps option on rpm) and then install the newer version
Next, are you trying to replace MySQL or install another version alongside it?
If the former, again try upgrading rather than installing. If that's not possible, you're going to have to remove the older version and then install the new version
If the latter, and if it is possible, look at the --prefix and --relocate options in RPM.as they may help.
If you do to mange to get it installed side by side with an older, you'll have fun and games ensuring that the relevant versions are pointing to the correct libraries and that you don't get any corruption between them. Also, you will need to run them so that they listen on separate ports with separate database folders, PID and socket files etc.
Whatever you need to do, do it out of business hours with as many backups as you can do