There's a table in a HTML file. The word-break CSS attribute indicates that long words have to break inside that table. I want only long texts (and not numbers) to break. I have some numbers, which have 1000 separators (every three digits, there's a comma). Those numbers break, too.
Is there any way to prevent those numbers from breaking ?
Use <span style="white-space: nowrap;">Content</span>. Alternatively, wrap your numbers inside a <nobr>-tag, note that this tag is not a standard though!
Related
See the description before Example 6 in the CommonMark spec at: http://spec.commonmark.org/0.27/#example-5
I am trying to understand how the following code leads to a code-block starting with two spaces.
>→→foo
Example 6 shows that this would translate to the following.
<blockquote>
<pre><code> foo
</code></pre>
</blockquote>
But Section 2.2 clearly states:
However, in contexts where whitespace helps to define block structure, tabs behave as if they were replaced by spaces with a tab stop of 4 characters.
So as per my understanding, the above Markdown behaves like the following (I denote a space with a dot).
>........foo
Since, one optional space is allowed after >, and 4 spaces are used to indent code block, we are left with,
>...foo
That's a code-block starting with three spaces. How does CommonMark claim then that it should lead to a code-block starting with two spaces? What am I missing?
The key is in the very first paragraph of the Tabs section (emphasis added):
Tabs in lines are not expanded to spaces. However, in contexts where whitespace helps to define block structure, tabs behave as if they were replaced by spaces with a tab stop of 4 characters.
Notice that is says "4 characters" not 4 spaces.
If you configure your text editor to use a tab stop of length four and to replace tabs with spaces (any good text editor should offer this setting), the text editor will use columns that are four characters wide. When you press the tab key, it will forward the cursor to the next column, which will only every be four characters wide. If the column already contains any characters, then only as many spaces are added to total four characters, which, in this case would be less than four spaces.
For example, if you type an angle bracket (>) character in your editor and then press tab, you will get the following (when configured to replace tabs with spaces):
>···
Therefore the angle bracket plus the tab moves forward to the end of the column (four characters) for a total of three spaces. As we are now at the beginning of the next column, pressing tab a second time would move us to the next column (4 more spaces) for a total of 7 spaces:
>·······
We can confirm this is the correct interpretation with a more recent change to the spec committed in 3bc01c5dc (which apparently hasn't made it it to a release yet). As the commit comment suggests, the clarification helps the math make more sense (emphasis added):
Normally the > that begins a block quote may be followed
optionally by a space, which is not considered part of the
content. In the following case > is followed by a tab,
which is treated as if it were expanded into three spaces.
Since one of these spaces is considered part of the
delimiter, foo is considered to be indented six spaces
inside the block quote context, so we get an indented
code block starting with two spaces.
Notice the added sentence (in bold) which confirms that the first tab only adds "three spaces".
Therefore, as we have now established, we start with an angle bracket plus seven spaces. So first we break off the blockquote deliminator, which consists of the angle bracket and the first space (in the following examples the | is used to indicate where the parser breaks the string and should not be counted as characters):
>·|······
The text contained in the blockquote is now indented six spaces. Four of them are the code block deliminator:
>·|····|··
Which leaves two spaces at the start of the code block.
Of course, as stated back at the beginning (of the section in the spec), the tabs aren't actually replaced with spaces, it just behaves as if they were. And that can be confusing at times. It may help to configure your text editor to always replace tabs with spaces and then you can avoid this confusion.
I've got textbox in SSRS report. Textbox consists of 2 placeholders. Second one is long enough for line to be split several times. I want text to be wrapped on spaces, but it's wrapped on plus and minus signs instead. I need "a-b+" and "Ss-+" to be kept together.
Text is fetched from database, I have full control but can't predict exact length or particular order.
My guess is that engineers who've implemented wrapping thought of plus and minus signs as a part of math formula. That's wrong in my case.
So far I've tried to add HTML tags: makes each block occupy whole line and makes no effect. I need something like display: inline-block
I've tried creating several placeholders for each non-breaking value - no effect.
If I replace plus and minus signs with letters, placeholder wraps text just fine:
One obvious solution would be to calculate required character length to add manual line breaks (vbcrlf). But it can't be done easily since it's not a monospaced font.
Is it possible to prevent word wrapping on plus and minus signs?
I send SQL to interested parties via Outlook as HTML, with Word as the editor.
I like to format my SQL using spaces, rather than tabs.
When I paste the SQL into the editor, formatting is spot on.
But the 'sent' version removes leading spaces.
For example:
Select
*
From
Employees
becomes
Select
*
From
Employees
Is there an option to prevent this?
I didn't find solution but found workaround - to replace all (and only) leading spaces to Nonbreaking Spaces. No needs to replace all ever spaces, only leading ones. This way Outlook will not trim them automatically while sending email.
Before send an email need to
select the text, you want to keep leading spaces, and run Find and Replace (Ctrl+H)
put into Find what: "^p " (caret, p, space) or click at the bottom [Special] button and choose Paragraph Mark and just a space character
put into Replace with: "^p^s" (caret, p, caret, s) or click at the bottom [Special] button and choose Paragraph Mark and Nonbreaking Space
now press [Replace All] - it will replace leading spaces with Nonbreaking Spaces only in selected text, leaving all the rest text unchanged.
Result with leading spaces:
First without leading spaces
One leading space in this row
No leading spaces again
One leading space in this row
Two leading spaces here
One leading space in this row
No leading spaces again
One leading space in this row
Two leading spaces here
Two leading spaces here
One leading space in this row
Two leading spaces here
Two leading spaces here
Three leading spaces here
With leading nonbreaking spaces:
First without leading spaces
One leading space in this row
No leading spaces again
One leading space in this row
Two leading spaces here
One leading space in this row
No leading spaces again
One leading space in this row
Two leading spaces here
Two leading spaces here
One leading space in this row
Two leading spaces here
Two leading spaces here
Three leading spaces here
Brief: Send e-mail as Plain Text to preserve whitespace.
After spending faaaar too much time trying (and failing) to override HTML paragraph styles, override list styles/characters, and tweak AutoFormat settings in Outlook 2013, the fallback solution may be to send any e-mails for which it is important to preserve whitespace as Plain Text.
One can send an e-mail as Plain Text by:
Selecting the Format Text ribbon tab.
Selecting Plain Text within the Format group.
In HTML5, how do you skip 5 spaces in a <div>? For example, how do you do this:
"Drumroll... [5 spaces] Something!"
<div>Drumroll... [5 spaces] Something!</div> just outputs "Drumroll... Something!"
There does not seem to be any tags such as <indent> that I have found to indent in the middle of a sentence.
      works, but is there a more efficient way? Such as...
<skip 10px></skip>
Specifically, I am looking for the solution to insert exactly 1,000 spaces easily, for example.
This is not perfectly five spaces, and I'm not sure if there's a way to do it without using five consecutive s, but this will allow you to add a specifiable amount of space inline.
<p>Drumroll...<span style="margin-left:50px;"></span>something</p>
http://jsfiddle.net/5drHj/1/
Another option might be to use the <pre> tag...
<pre>Drumroll... something</pre>
http://jsfiddle.net/5drHj/2/
If you do decide to use consecutive you could use a javascript loop (or php loop for server side construction) to add the 1000 s
Edit: At the risk of losing my tick, I'd like to point out that the answer given by #vals is a third option, and perhaps the most elegant of the three.
No, there is no such element in HTML. Long ago, there was the nonstandard <spacer> tag, but it was abandoned. You are supposed to use CSS for things like this. Wrap some preceding text in a <span> element and set padding-left: 1.25em on it. Tune the value as needed. The width of a space depends on font but is on the average around 0.25em.
The question that you pose in the first half of the question (How to insert spaces easily), is achieved with the property:
white-space: pre;
It means that your text is pre-formatted, and the white spaces should stay as they are. Then just insert those spaces.
fiddle
If you want to insert 1000 spaces, then we are talking probably about alignment, and there is a huge amount of posibilities. (padding specified in em being the most obvious), but you should then give more details of your situation.
Is it possible to ignore white space between characters inside a text input field
let's say a user types in "bri an" instead of "brian.
Is there a way that white space is ignore and treated it as one word?
One of many ways is to use the TextField.restrict property. Simply prevent spaces from being typed into your textfield in the first place by doing this:
myTextField.restrict = "^ ";
The ^ means to disallow the following characters (in this case we are disallowing a space).
I put an example on wonderfl http://wonderfl.net/c/teOC