I've been trying to set up an XMPP server using ejabberd on windows. every time I try to register a user in ejabberd with this command:
ejabberdctl register admin localhost admin
it gives me this error:
{error,access_rules_unauthorized}
I've installed the ejabberd using its binary installer and according to "install.log" file, the installer also fails to create a user due to the same error.
Part of the log file:
E:\Program Files\ejabberd-16.08\bin>bash ejabberdctl register "admin" "localhost" "admin"
{error,access_rules_unauthorized}
ejabberd.yml config file:
access_rules:
register:
- allow
I've gone even to the 100th search of the google, but found nothing similiar yet. So any help on how to fix this is strongly appreciated.
Try version 16.06 instead of 16.08 from downloads archive https://www.process-one.net/en/ejabberd/archive/ It solved my issue on Centos.
It seems like this is an error in ejabberd 16.08 and has been fixed in the git master.
For the corresponding issue, see https://github.com/processone/ejabberd/issues/1231.
Version 16.06 work for me in windows10, before installation keep firewall off.
Related
This is my first MySql install from the ground up.
I am using Windows Server 2016, trying to install MySql 8.0.15. I am doing this to try and use it with php 7.3.1.
The install has all the listed prerequisites.
When I get the config section of mysql insstaller, it breaks on the first response with an error of "Beginning configuration step: Writing configuration file
Invalid server template
Ended configuration step: Writing configuration file"
The system event log has one error, "The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{8D8F4F83-3594-4F07-8369-FC3C3CAE4919}
and APPID
{F72671A9-012C-4725-9D2F-2A4D32D65169}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool."
But I'm not sure this is even the right troubleshooting path to start down.
Can you assist with some guidance?
I had the same problem with the
mysql-installer-web-community.
The mysql-installer-community was working without a problem.
The bottom link is the none web installer which was working.
For me initially when I was not accepting the initial update mysql pop-up then installer was not working, but once I accepted it. Then it successfully worked for me.
I have been able to install after getting the same error.
I have changed the credentials for the sql root.
By default, host is set to something like %ALL_HOST%. I changed to localhost.
I ended up uninstalling all mysql 8 components that had already installed.
Then went back and got the mysql installer 5.7.25.0. I think I had some trouble after that, but it wasn't the same error. I finally ended up installing mysql 8.0.15 by itself and it worked. Then I went back and did the connectors. Next the workbench. Finally docs and samples. Doing them one at a time seemed to go better. I am now up and running.
Here's what I did to fix the issue
completely removed mySQL Server and Workbench installations.
uninstalled the mySQL web installer. Restarted my computer.
ran the mySQL web installer again (only installing mySQL Server)
downloaded the mySQL Workbench installer to install Workbench separately
I have installed MySql Workbench 8.0.13, I'm trying to test localhost connection.
I tried root, admin, root#123, YES, none of the passwords work and instead shows error messages.
I've even tried other stackoverflow answers but instead got "access denied" error messages.
Update
After #Yoric answer: brew install mysql
I tried configuring the local management settings but I'm getting this:
When you install MySql using brew the my.cnf file is placed in /usr/local/etc/ instead of in /etc/.
You have to point MySQl Workbench to this path to avoid the error. I don't have this application but after a quick glance in the documentation I found this page where you can add /usr/local/etc/ in the field Configuration File.
Thanks #Yoric #Joakim
Step 1. brew install mysql
Step 2: Refer this answer to locate config file
I met this problem too. I just clicked the continue button until i was
at "Review remote management settings" step, and stop here click
"change parameters", then continue. At "Path to configuration file"
choose the path point to my-default.cnf. Then check path, it works
REF: https://stackoverflow.com/a/24028563/5589073
Step 3. #Joakim told about the correct path, i updated in step 2 path while change parameters. It works.
Thanks all 3 guys.
My MySQL Workbench is not connecting to my local host, and I cannot figure out why exactly it is reacting like this. It just started doing this one day, and randomly it will give me access although it says it is still "unknown", but I am tired of this and would like to fix it.
Since this website reqires that I have a "10" reputation to post images, I will have to describe it.
On the Startup/Shutdown tab in the administration page, it says:
The database server instance is unknown. --The "Start Server" button is faded out so that I cannot click it.
Startup Message Log
2013-07-11 08:57:51 - Workbench will use cmd shell commands to start/stop this instance
2013-07-11 08:57:51 - Status check of service 'MySQL' returned error: Not found
2013-07-11 08:57:51 - Status check of service 'MySQL' returned error: Not found
2013-07-11 09:00:55 - Status check of service 'MySQL' returned error: Not found
2013-07-11 09:00:55 - Status check of service 'MySQL' returned error: Not found
2013-07-11 09:02:01 - Status check of service 'MySQL' returned error: Not found
Then on the server status tab in the administration page, it says:
Name: mysqld#localhost
host: localhost
server:unknown
status: unknown
Connection
There is no connection to the MySQL server. This functionality requires an established connection to a running MySQL server to work.
If anyone can help out, that would be great!
Thanks
I had this problem on my Windows 8.1 machine and it turned out to be problems with the file permissions.
To repair it I went into the folder at "C:\Program Files\MySQL\MySQL Server 5.6" and right clicked on the "data" folder and selected properties. Clicked the security tab and clicked edit. From there click the ADD button then the ADVANCED button and finally the FIND NOW button. In mine I added users, administrators, and "ALL APPLICATION PACKAGES". I granted full control to the users that were already listed for the data folder and the users, administrators, and ALL APPLICATION PACKAGES.
After the permissions were repaired I opened a command prompt as administrator and changed to the "C:\Program Files\MySQL\MySQL Server 5.6\bin" directory cd "C:\Program Files\MySQL\MySQL Server 5.6\bin". From there you can execute mysqld --install which installs the MySQL service.
More information about installing the mysql service on windows can be found at http://dev.mysql.com/doc/refman/5.0/en/windows-start-service.html
[edit] Please note that if you are using a different version of MySQL than the path to the MySQL data directory and bin directory may be different on your windows machine.
The error message says it: the service with the name MySQL cannot be found. So probably your MySQL service has a different name? Do you have a service at all? Starting mysql manually from the bin folder is just that: manual. There is no service involved, hence WB cannot manipulate the run state.
When you install MySQL with the MySQL installer you have everything in place within a couple minutes and it works right from the start.
So first check if you have a service running for your MySQL server and stop starting it manually. If there's a service take its name and enter it in the Windows Service Name field of the configuration manager:
Note that MySQL Workbench can manage your server only if it is installed as a Windows service.
I had this problem on my Windows 8.1, and I solved it updating my workbench to Version6 with "mysql-installer-web-community-5.6.16.0.msi" from the official page of mysql
I have found reinstalling all MySQL products a better alternative, because some of the solutions on the internet will make another instance of your mysql server along with mysql56, which might mess things up for a beginner.
Remember to keep database files and configuration undeleted during the reinstallation.
I had problem on MAC.
Please ensure you have installed mysql and its running. Because installing only workbench app, will not install mysql service. First install mysql and run the service.
In my case, I tried with brew
brew install mysql // installing mysql
brew services restart mysql // restart service after installing
mysql --version // check version
I was trying to reinstall MySQLServer on my local machine (Win7 32), using Windows (x86, 32-bit), MSI Installer.
When wizard configure server, after installation, gives the error "Configuration failed", with details:
mysql-server-5.5-win32:6 - Looking for valid template
mysql-server-5.5-win32:13 - Found valid template.
mysql-server-5.5-win32:20 - Attempting to process template.
mysql-server-5.5-win32:26 - Processed template.
mysql-server-5.5-win32:33 - Attempting to configure service.
mysql-server-5.5-win32:40 - Configured service.
mysql-server-5.5-win32:46 - Attempting to start service.
mysql-server-5.5-win32:100 - Unable to configure service.
mysql-server-5.5-win32:100 - Product configuration controller finished configuration.
Why does it happen?
Can it result from using a wrong "old" password that I put in the installation wizard, to set a new password? If yes - How can I clean up ALL previous settings of MySQL server?
Uninstall MySql and all his components excepted Oracle installer, re launch installer, do normally, when your error comes, finish the procedure of installation.
Next step, in start menu search "services", execute services administration tool, right click on the service "MySql Server XX", select "Connexion" tab and check "system account" on start user, launch the process and it would work.
I was struggling with upper problem over 3 days and I think there is a bug when you want to install this with local connection (not tick TCP connection) via .msi installer. After i selected this the configuration passed properly with no fail configuration. My sollution was to run this with set tick on TCP connection and then in server folder in my.ini file just uncomment line # skip-networking .
Other tips:
Turn off the firewall or add rule for installer to accept public/private net connections.
Under admin privileages use netstat -ab | more command to check ports usage
If u fail with earlier installations run services.msc command find your service (installer set is as defauls something like MySQL56,MySQL56_1 - depending on version) get the name of this service and under admin privileage run cmd and type sc stop "coppiedServiceName" if the service is running and later sc delete "coppiedServiceName"
In some forum says that if might be usefull to turn of windows defender or antivirus too
If you change default installation directory after reinstall check for old install files on C:\Program Files C:\ProgramData and get rid of them
Hope somebody find this usefull.
I had the same issue on Windows XP. The problem was caused by the localization. I had to change the path to the All User's AppData folder using regedit. The original path contained a non ANSI character.
The registry key is this:
"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
The value name is this:"Common AppData"
The original value was: "%ALLUSERSPROFILE%\Data aplikací"
I changed it to: "%ALLUSERSPROFILE%\AppData"
Then the installer succeeded.
NOTE: Uninstall MySQL first, then change the path, then install MySQL again.
I just installed the latest version of MySQL. Until Now I had it on Windows XP but I wanted to install this on another computer with Windows 7.
Even after configuring everything correctly, the MySQL client won't show up in the Start Folder. So I went to the bin folder of MySQL and tried opening mysql.exe but it would immediately close down.
I then tried opening mysql.exe in cmd & this is what I get
C:\Program Files\MySQL\MySQL Server 5.5\bin>mysql
ERROR 1045 (28000): Access denied for user 'ODBC'#'localhost' (using password: N
O)
Any Ideas how I can get this to work?
Provide username (root)
C:\Program Files\MySQL\MySQL Server 5.5\bin>mysql -uroot
Default passsword is blank, but if you set it, you will need to provde password as well
I don't recall where I first read it, but when facing this problem before, I found that I had to manually turn on a service:
Windows key+R and type Run and hit "enter"
Type "services.msc", hit "OK"
Find "MySQL56", right-click and choose "Start"
You should now be able to log in with no trouble
That's the solution that worked for me; hopefully it helps others out there.
What #Herschel said is right if you follow his steps 1-4 then try to log in with your password in command line you'll have no trouble.
You can also make this run automatically as a service, something which you need when running it on a server.
Open Run
Type "services.msc" click ok
Find the MySQL service
Right-click properties then go down to startup type:
Change it to automatic
I followed these steps and it worked for me:
1. Open Command prompt in admin and go to the location of Mysql bin folder and type -
C:\ProgramFile\mysql\bin>mysql -u root -p <password>
2. Then the prompt asks for the password. This is the password or the root user which
you had set during installation of mysql.
3. Type the password and you will login in to mysql.
4. Also make sure your mysql service is running in the backend by going to the
windows service panel and check whether the mysql service is running.
Heyoo Heyoo. So as of today 19th March 2022 I had this same issue but imma show you how I solved it. My specs before we start:
MySql Version: 8.0
OS: Windows 10
OS Build: 19044.1586
Alright, I'm fairly new to SQL, was following along with a tutorial but when it got to the point of opening the client command line it wouldn't open, it just popped up and closed back; didn't even ask for a password. After watching several tutorials (which were very unhelpful) I noticed from those tutorials that the solution they proffered was to "Active the MYSQL80 service", but that was unhelpful to me because I couldn't see that service in the services menu.
So I decided to go back to the "MySql Installer -Community" App (I installed the community version of SQL)
After the installer had opened up I clicked on the "Reconfigure" action for MySQL Server
It opened the configuration window for the SQL Server and I followed the configuration process to set up the server (turns out I didn't initially set it up when I installed MySQL 😅😅). After the configuration process was done I went back to the services menu to see if the "MYSQL80" service was there... and it was, I checked to see if it was running; following the instructions from this tutorial. After making sure the service was running I went back to the client command line, it finally opened up, allowed me to input my password, and it's working properly!!