I hardly dare bring up this topic because what is happening is so extremely strange - but I'll try anyway.
I have a large Access DB for a customer. One of the forms in the front end has a series of subforms. Until recently, everything was working well.
Now, when a new version of the front end is sent to the customer (I tried Team Drive as well as WeTranser) this results in one of the subforms being changed to a different form. This form is also in the database but is by no means linked to the main form in question.
I have tested this several times: The version on my PC is still working perfectly. The version that the customer sent back to me according to my request has the wrong subform in it.
We are all working on Access 2010 with an Access 2000 format MDB. The reason for this is that the Backend needs replication.
Does anybody have a clue on how or why this could be happening? Thanks in advance.
Found a solution myself after testing together with the customer.
Copied the file via USB stick this time. The copied file was OK on the destination system. Opened file pressing shift button so no programs would run. Everything was still OK. Then opened the file in the usual way. The start form realized that the paths had changed and relinked all the tables. Except for the start form, no other forms are involved in this operation. After that, the subform had changed to a different form.
Solution (rather: Workaround): Changed the name of the subform that replaced the correct subform. After that, everything went well.
The change of the subform only occurred during the relink routine. If the subform was changed to the correct one manually after relinking, it remained correct.
Reasons? Has Microsoft released updates to MS Access recently? We'll probably never know.
Related
Right now I'm working on an application in access 2010 that generates letters based of data taken from a share point site. The user inputs some parameters from some combo boxes on a form. After the selection is made the user selects the type of letter they want by pressing a button.
This works fine but I'm experiencing an odd issue when I close access and reopen it later.
When I open the form after starting access again I'll attempt to create a letter but instead of working like it did before the criteria prompt window appears asking for a parameter instead of taking the form values.
This happens every-time I restart access and the way I've been fixing it is by changing the names of the combo-boxes and then adjusting the queries accordingly.
This is what i was using to get the form values in the query
Like [Forms]![Main Menu]![A] & "*" (A is the name of the combo box, I got tired of renaming it)
Any Idea whats going on because I'm at a loss.
Thanks in advance!
If you are 100% positive that Access is finding your parameters just fine, and when Access closes they are lost, then:
Do you have any backup copies of this database before the error
occurred? Can you use one of them?
Do you Compact & Repair the database every time you close it? This
can be used somewhat as "damage control," because MS Access does
have a tendency to become corrupt.
Make sure the Main Menu form is open as long as the query is
running. Does it close right away (aka the query isn't finding the
parameter because the form is closed)?
From searching around, it seems that you aren't the only person with this problem. A known fix for people seems to have been copying all objects into a new database (which to me, sounds like the database is corrupt.) This could also mean maybe only your form is corrupt. Perhaps try to create a new form that does all of the same things that your Main Menu form does.
I'm sorry there doesn't seem to be a 'clear-cut' definitive solution for your situation.
If any VBA is involved, see below:
If you use the "Database Documenter" feature and check "yes" to all the options, you will obtain an exhaustive report that should let you trap your problem parameter. Export this report as an .rtf or .pdf document, so it is searchable. Identify a keyword from the dialog prompt, and search on that.
Once you check the query objects using the Documenter, check your VBA code. You'll do this by stepping through code in the IDE. If the main form has subforms, they are opened with (within) the main form. And they load before the main form.
Identify those subforms.
Sprinkle breakpoints in their code modules (if you find a Load function, that is highly relevant).
If the main form has a code module, do the same there.
From this thread
I have a MS Access 2010 DB with bunch of forms,queries ,macros, Reports etc
The data for my report comes from ODBC links to SQL Server 2000 Tables via linked table property.
Now, whenever i goto design mode of a report,Everything moves painfully slow (I have to wait atleast half a minute for every mouse click,or to select a text box , or any operation performed on the report)
The report itself takes about a minute to run.Which i dont mind.
All I am looking for, is a quicker way to make changes to the design of reports.
This is an old question, but I had a similar issue with form design running extremely slowly recently. For me, only one form seemed to be affected (all others ran fine in design mode). The record source for the form was a complex query built on a hierarchy of subqueries. I dumped the query results into a table and used the table as the record source for the form instead of the query. This appears to have resolved the issue. Hope this helps someone else.
I found the main cause to be the Access conversion program that converted 2003 format to 2010. If you create a new .accdb and then import all of your object, it should work OK. I definitely fixed my issues
What worked for me is based on the answer provided by Albert Kallal at http://www.utteraccess.com/forum/lofiversion/index.php/t1959800.html.
For me, in my split database, if I open any table that is linked to the backend then opening any frontend form or subform was very quick. If I do not have open and keep open a linked table, then it takes about 20 seconds to switch from Form View to Design View and another 20 seconds to open a subform, etc. When I have a linked table open (it does not matter which table, just any table linked to the backend), then it takes about 1 second to do any of those functions. Huge difference!
That is not normal. Something is wrong. Could be your Office/Access installation, your OS installation, something taking up too much of the system CPU, or your system just not having resources, like memory, to properly run Access. Or that your DB is corrupted and/or bloated.
Two tests you can try.
First, do a compact/repair on the DB and see if that fixes it.
Second, is to start your computer in Safe Mode and see if Access still runs slow. This will test for much of the above issues.
What worked for me was to change the subdatasheet name from 'auto' to 'none' on all local tables. Do this in the property sheet in table design mode. There are routines posted elsewhere that will find all your local tables and change this value.
A table was linked to an Excel file. I found that when the Excel file was open, it took forever to change to design view on ANY form. Closing the Excel file eliminated my problem!
My case is access work fine in every function except opening or designing report. But access can work fine when network disconnect. I found it's cause by printer share by other computer and the computer which was removed. I remove the printer from control panel and access can work smoothly.
Recently, my team's Microsoft Access databases have been migrated from Access 2003 to 2010. Obviously that causes a many problems, but we got most of them figured out. There is one problem, however, that I can't seem to fix.
Many people use this Access application with no issues at all, but about three of my users are experiencing a peculiar problem.
There is a subform within a form and its contents get loaded through a query. There is a box for a picture, a text box, a check box, and a button on this subform. For myself and 99% of the people using the application, the picture loads and everything appears as it should. For the 3 people experiencing the problem, however, the entire subform is completely blank.
The data is stored in OLE Objects and everybody is using the same data.
I can't figure out why it would work for so many people but fail for others. Does anybody have any ideas?
OK so this is kind of a general question here. We run an ASP/C# Site that's fed by a SQL 2008 R2 database.
Our data entry takes place using Microsoft Access 2007 and feeds to a SQL 2008 R2 instance.
Our data entry forms (all .adp) are generally simple, but we randomly run into problems where I'll post a change to the DB (we have a script that runs at night and will archive our old DB versions in the form of "DB_NAME.adp03122012" and keeps the newest revision as "DB_NAME.adp". This way, our data entry team will just need to click on a network shortcut to access the Access forms.
What we're running into is non-reproducible errors of varying types on random machines.
Example, I make a simple search that has a combo box and a search button. You select the item you want to search for and it updates the record source to search for that PK/FK. It works fine on my developer box. It works fine on certain end-user boxes. But on others, it throws a run-time error:
"Run-time error 2467: The expression you entered refers to an object
that is closed or doesn't exist".
Now the error itself isn't the focus of this. It's not being able to reproduce it. I tried running it on another box that has the same hardware specs as the offending box and it ran fine, no errors, no nothing.
I'm at an absolute loss as to why this is happening. I don't think the error is actually related to my VB code or to our databases, as it's working fine on some computers and isn't working on others. It's almost as if the code isn't propagating properly to specific boxes.
Has anybody else dealt with this before?
I feel somewhat foolish, but our Network Admin hadn't propagated Windows updates to all of our end user boxes.
The advice that Remou and mwolfe02 gave was valid and helpful, and likely would've helped had I been informed that the computers in question needed updates.
Thank you for reading and offering comments and help.
Good day...
The root of my issue is that there's no context menu allowing the user to delete a row from a form. The "delete" button on the ribbon is also disabled. In Access 2003, apparently this function was available, but since our recent "upgrade" to 2007 (file is still in MDB format) it's no longer there.
Please keep in mind I'm not an Access dev, nor did I create this app - I inherited support for it. ;) Now for the details, and what I've tried.
The form in question is a subform on a larger form. I've tried turning "AllowDeletes" on on both forms. I've checked the toolbar and ribbon properties on the forms to see if they loaded some custom stuff, but no. I've tried changing the "record locks" to "on edit", no joy. I examined the query to see if it was "too complicated" to permit a delete - as far as I can tell, it's a very simple two (linked) table join. Compared to another form in this app that does permit row deletes, it has a much more complicated (multi-join, built on queries) query.
Is there a resource that would describe the required conditions for allowing deletes?
Thanks in advance...
Open the query that is the basis for the subform. Can you edit a record? If not, the query is probably the problem.
Are you quite sure the change in functionality happened with the 2007 upgrade? Because the next likely cause is a setting, one of many accesses via the form design interface OR in VBA code.