I would like to repeat header row with each record fetched in SSRS report. Please help me with the way to achieve the functionality.
Thanks in advance.
On the bottom row of the designer which shows Row Groups and Column Groups, there is an arrow down logo at the right side. Click that then it will show Advanced Mode.
Then on the row groups. click the 1st (Static) then on the Properties pane. Make RepeatOnNewPage property into True. I also suggest FixedData property into true so even if you scroll down, the header still shows.
Instead of grouping on the row you view as the header simply move into the child group.
Related
I am a Beginner in SSRS where i am Getting this Random Conflict--My Column Headers are Not Repeating in the Next Pages of my RDL.
How to Achieve this?? Can you all please help me out.
Depending on the version SSRS you are running you may have to do it another way. Select the tablix and then under the Columns Groups click the down arrow on the right of the header and select "Advanced".
Then under Row Groups select the Static item at the top. The properties should refresh and set the property "RepeatOnNewPage" to true and the "KeepWithGroup" to after.
Observe! Not Tablix header or Matrix header in fact no header at all, I want a Image that is a report wide image at the top of the reports to be visible when scrolling.
How can I do that???
I've tried to do the same time ago but seems like its not achievable. It is not even possible to use an expression for location property: SSRS: Report label position dynamic
Could you add the image to part of the main tablix of the page, as another column header above the other columns, then set it to scrolling?
tool box Place Image item in designer header and near row group you can see a small triangle simble .Click it and go to the second option . Now you can see a new group in Column grouping. Select that particular group properties and you can see false in most of the places . Change each false -> true and go to preview and scroll down .
Happy designing ( SML scripting in backend...)
I have an SSRS report, for some reason the header is not repeating on all of the pages in the print preview mode. Below is the image of the table:
I have as well checked the Repeat Header rows on each page option as below:
I would like the headers to repeat on every page.
To repeat rows with column headings for a table with row groups
In Design view, select the table. The Grouping pane displays the row groups.
On right side of the Grouping pane, click the down arrow, and then click Advanced. The Grouping pane displays static and dynamic tablix members for each group. You can only set properties on a static tablix member.
In the Row Groups pane, click the static tablix member for the row that you want to repeat. When you select a static tablix member, the corresponding cell on the design surface is selected, if there is one. The Properties pane displays the properties for the selected tablix member.
Set the KeepWithGroup property in the following way:
For a static row that is above a group, click After.
For a static row that is below a group, click Before.
Set the RepeatOnNewPage property to True.
Here i got a solution :
1. In the Tablix properties check the boxes for: Repeat header rows on each page and Keep header visible while scrolling.
make sure that the column headrs check boxes are NOT checked.
2. In the Group pane on the left (Row Groups) the first line is static.
3. set its: "ReapetOnNewPage" property to TRUE
set its: "FixedData" property to TRUE
set its: "KeepWithGroup" property to AFTER
How to Repeat Page Header on each Page.
Repeat on NewPage Property is not appearing in ssrs 2008 tablix memeber property
After a little experimentation, I figured out how to consistently get the table header to repeat on every page.
The setting of the RepeatColumnHeaders property on the tablix seems to have no effect on this behavior. Instead, we have to set it on a static member of the row groups.
To see the static members of the row groups, click on the small drop down arrow on the far right of the row groups/columns groups header. Then select Advanced Mode.
With the static members of the row group shown, select the first one in the list. The top left cell of the tablix should be selected in the designer.
Now open the property pane and find the property RepeatOnNewPage and set it to True.
Then find the property KeepWithGroup and make sure it's set to After. If it's not, set it to After.
Now your table header will repeat on every page.
Depending on how you created your new report, the Tablix xml may or may not have attached the correct properties to the "Header" row of the tablix.
Here is another thread on SQL Server Central with the fix:
http://www.sqlservercentral.com/Forums/Topic593245-1063-1.aspx
Here is the important bit:
for SSRS 2008,
If a report with a table is created using the wizard feature (In Solution Explorer, right click on >Reports --> Add New Report) Table Headers will repeat on every page.
Instead if a report is created without using the wizard (In Solution Explorer, right click on Reports --> Add --> New Item) Table Headers will not repeat on every page. Setting Repeat Header (Rows/Columns) on each Page for the Tablix will not help either.
If you have already built the report and cannot rebuild using the steps above and if and only if you are comfortable altering the xml behind the rdl, do the following. (Save a Backup rdl first)
View Code.
Look for TablixRowHierarchy
Below that there will be a TablixMember that corresponds to the header row.
to that header and any other header rows ( Tablix Member) add the three element properties.
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<KeepWithGroup>After</KeepWithGroup>
<RepeatOnNewPage>true</RepeatOnNewPage>
<KeepTogether>true</KeepTogether>
</TablixMember>
...
You should see the header rows repeating.
I tried this in my own Report and found it fixed the problem.
You could also turn on "Advanced Mode" in the Row/Column Groups window and then modify each Static Row entries "RepeatOnNewPage" setting. You'll probably have to set "KeepWithGroup" to "After" as well.
This works well if you utilize a subreport as your header.
You can repeat page headings on every page if your page breaks are due to breaks between groups (hard pagination). You cannot repeat page headings between pages if the pagination is due to a small interactive page size (soft pagination). To repeat page headers on each page between groups, make the headers of the tablix part of the group and under the General tab of the Tablix Properties window check Column Headers -> Repeat header rows on each page. You can also do this from the general properties window of the Tablix by using the RepeatcolumnHeaders = True.
Please note my comments are limited to developing SSRS 2008 reports in BIDS. I do not know if this functionality exists in Report Builder.
here the steps you can follow. this resolved the issue(column header on each page):
1) in design mode of rdl file, at bottom you will find "Row Groups" and "Column Groups" (left and right, respectively). Beside Column Groups you will find one arrow button.(this arrow button is right side of column groups protion). click on this arrow button.
2) Check the "Advanced Mode"
3) RowGroups section you will find "(static)" and "(Details)". click on static and press F4(to check it's properties.)
4) provide "Keep With Group" as "After"
5)Provide "Repeat On New Page" as "True"
6) Go back to table, Right click on row header, Go to tablix properties.
7) check on "repeat Header Column on each page" and "repeat Header column on each Rows"
Hope this will help you.
I have an RDLC report with three tables and associated data sets. In my second table, I cannot get the two 'header' rows to repeat on each printed page. When viewed interactively, each table is on its own page and this isn't a problem. When I switch to print layout, e.g. my second table now spans two pages, and the second page gets no header rows.
Am I missing a setting or something?
ADDED: I do have the 'Repeat Header columns on each page' checked.
http://vbcity.com/blogs/xtab/archive/2010/06/14/what-to-do-when-the-repeatcolumnheaders-property-in-a-tablix-isn-t-working.aspx
That should help you out for getting them to repeat. (some of the time)
I still have an issue where I set the hidden value to an expression for the next group header that some of the time it won't render my group header on the next page. Very annoying. If someone knows of a fix for this please let me know.
Copied from Microsoft Technet Article. Helped me:
To display a static tablix member (row or column) on multiple pages.
On the design surface, click the row or column handle of the tablix data region to select it. The Grouping pane displays the row and column groups.
On the right side of the Grouping pane, click the down arrow, and then click Advanced Mode. The Row Groups pane displays the hierarchical static and dynamic members for the row groups hierarchy and the Column groups pane shows a similar display for the column groups hierarchy.
Click the static member that corresponds to the static member (row or column) that you want to remain visible while scrolling. The Properties pane displays the Tablix Member properties.
In the Properties pane, set RepeatOnNewPage to True.
Repeat this for as many adjacent members as you want to repeat.
Have you ticked "Repeat header rows on each page" on the table properties?
(Right-click the table > properties)