i am using MySql workbench 5.7 to run this.
i am trying to get the result of this query:
SELECT COUNT(Users) FROM UserList.custumers;
and this query:
SELECT Users FROM UserList.custumers;
at the same table, meaning i want a list of users in one column and the amount of total users in the other column.
when i tries this:
SELECT Users , COUNT(Users) FROM UserList.custumers;
i get a single row with the right count but only the first user in my list....
You can either use a cross join since you know the count query will result in one row... whose value you want repeated on every row.
SELECt users, userCount
FROM userlist.custumers
CROSS JOIN (Select count(*) UserCount from userlist.custumers)
Or you can run a count in the select.... I prefer the first as the count only has to be done once.
SELECT users, (SELECT count(*) cnt FROM userlist.custumers) as userCount
FROM userlist.custumers
Or in a environment supporting window functions (not mySQL) you could count(*) over (partition by 1) as userCount
The reason you're getting one row is due to mySQL's extension of the GROUP BY which will pick a single value from non-aggregated columns to display when you use aggregation without a group by clause. If you add a group by to your select, you will not get the count of all users. Thus the need for the inline select or the cross join.
Consider: -- 1 record not all users
SELECT Users , COUNT(Users) FROM UserList.custumers;
vs --all users wrong count
SELECT Users , COUNT(Users) FROM UserList.custumers group by users;
vs -- what I believe you're after
SELECT Users, x.usercount FROM UserList.custumers
CROSS JOIN (Select count(*) UserCount from userlist.custumers) x
Use a subquery in SELECT.
Select Users,
(SELECT COUNT(Users) FROM UserList.custumers) as total
FROM UserList.custumers;
Related
Objective:
I wanted to show the number of distinct IDs for any combination selected.
In the below example, I have data at a granular level: ID level data.
I wanted to show the number of distinct IDs for each combination.
For this, I use count distinct which will give me '1' for the below combinations.
But let's say if I wanted to find the number of IDs who made both E-commerce and Face to face transactions, in that case, if I just use this data, I would be showing the sum of E-comm and Face to face and the result would be '2' instead of '1'.
And this is not limited to Ecom/Face to face. I wanted to apply the same logic for all columns.
Please let me know if you have any other alternative approach to address this issue.
First aggregate in your table to get the distinct ids for each TranType:
SELECT TranType, COUNT(DISTINCT id) counter_distinct
FROM tablename
GROUP BY TranType
and then join to the table:
SELECT t.*, g.counter_distinct
FROM tablename t
INNER JOIN (
SELECT TranType, COUNT(DISTINCT id) counter_distinct
FROM tablename
GROUP BY TranType
) g ON g.TranType = t.TranType
Or use a correlated subquery:
SELECT t1.*,
(SELECT COUNT(DISTINCT t2.id) FROM tablename t2 WHERE t2.TranType = t1.TranType) counter_distinct
FROM tablename t1
But let's say if I wanted to find the number of IDs who made both E-commerce and Face to face transactions, in
You can get the list of ids using:
select id
from t
where tran_type in ('Ecomm', 'Face to face')
group by id
having count(distinct tran_type) = 2;
You can get the count using a subquery:
select count(*)
from (select id
from t
where tran_type in ('Ecomm', 'Face to face')
group by id
having count(distinct tran_type) = 2
) i;
I'm trying to make an event in phpmyadmin that will get the number of rows in a number of tables and then insert the results into another database. The only issue is I can't seem to be able to use mysql to count the rows and then also put them into the table. I've also tried to set mysql variables with the COUNT(). Here is the current code that I have:
INSERT INTO user_count (users,taps,statues,questions,friendships,expressions)
SELECT COUNT(*) from `users`,COUNT(*) from `taps`,COUNT(*) from `status`,
COUNT(*) from `questions`,COUNT(*) from `friends`,COUNT(*) from `expressions`;
You are almost done. Following query would be worked for you.
INSERT INTO user_count (users, taps, statues, questions, friendships, expressions)
SELECT
(SELECT COUNT(*) from `users`)
(SELECT COUNT(*) from `taps`)
(SELECT COUNT(*) from `statues`)
(SELECT COUNT(*) from `questions`)
(SELECT COUNT(*) from `friendships`)
(SELECT COUNT(*) from `expressions`)
;
I have read many replies and to similar questions but cannot seem to apply it to my situation. I have a table that averages 10,000 records and is ever changing. It containing a column called deviceID which has about 20 unique values, another called dateAndTime and many others including status1 and status2. I need to isolate one instance each deviceID, showing the record that had the most current dateAndTime. This works great using:
select DISTINCT deviceID, MAX(dateAndTime)
from MyTable
Group By deviceID
ORDER BY MAX(dateAndTime) DESC
(I have noticed omitting DISTINCT from the above statement also yields the same result)
However, I cannot expand this statement to include the fields status fields without incurring errors in the statement or incorrect results. I have tried using IN and EXISTS and syntax to isolate rows, all without luck. I am wondering how I can nest or re-write this query so that the results will display the unique deviceID's, the date of the most recent record and the corresponding status fields associated with those unique records.
If you can guarantee that the DeviceID + DateAndTime is UNIQUE you can do the following:
SELECT *
FROM
MyTable as T1,
(SELECT DeviceID, max(DateAndTime) as mx FROM MyTable group by DeviceID) as T2
WHERE
T1.DeviceID = T2.DeviceID AND
T1.DateAndTime = T2.mx
So basically what happens is, that you do a group by on the DeviceID (NOTE: A GROUP BY always goes with an aggregate function. We are using MAX in this case).
Then you join the Query with the Table, and add the DeviceID + DateAndTime in the WHERE clause.
Side Note... GROUP BY will return distinct elements with or without adding DISTINCT because all rows are distinct by default.
Maybe:
SELECT a.*
FROM( SELECT DISTINCT *,
ROW_NUMBER() OVER (PARTITION BY deviceID ORDER BY dateAndTime DESC) as rown
FROM MyTable ) a
WHERE a.rown = 1
I have two tables and i am trying to get count from both tables. Means count from first table then count from 2nd table and result should look like this.
Count(users.name) Count(users_types)
5 8
But my query brings this result
Count(users.name) Count(users_types)
8 8
Here is my query
select count(users.users),
count(users_types.users_types)
form users , users_types
How can i get correct result?
try:
select
(select count(users.users) from users),
(select count(users_types.users_types) form users_types)
select (select count(*) cnt1 from table1),
(select count(*) cnt2 from table2)
Use a sub query like this
select
count(users.users) Users,
(select
count(users_types.users_types)
from teams) UsersTypes
from users
I wish to find the total number of distinct records in a table.
I have a table with the following columns
id, name, product, rating, manufacturer price
This has around 128 rows with some duplicates based on different column names.
I only want to select distinct rows:
select distinct name, product, rating, maufacturer, price from table
This returns 47 rows
For pagination purposes, I need to find the total number of distinct records, so I have another satatement:
select distinct count(name), product, rating, maufacturer, price from table
But this returns 128 instead of 47.
How can I get the total number of distinct rows? Any help will be much appreciated. Thanks
You have the distinct and count reversed.
SELECT COUNT(DISTINCT column_name) FROM table_name
Also, I would drop the extra fields when counting, your results will be unexpected for those other fields.
It is not quite clear if you want to get the count in the SAME query with the results or if you want to run a different query. Here go both solutions. In the result as a new column:
select distinct name, product, rating, manufacturer, price, (
select count(*) from (
select distinct name, product, rating, manufacturer, price from table1
) as resultCount) as resultCount
from table1
Notice the previous solution will repeat the count(*) for each row, which is not very efficient, not even visually appealing. Try running two queries one getting the actual data and the other one to get the amount of records in the table that match that data:
select distinct name, product, rating, manufacturer, price from table1
select count(*) from (
select distinct name, product, rating, manufacturer, price from table1
) as result
Hope this helps
Try adding GROUP BY name, product, rating, maufacturer, price clause
It would require running your actual query TWICE... an INNER for distinct and then get the count of those as a single row returned, and then join that to the original select distinct...
select distinct
t1.product,
t1.rating,
t1.maufacturer,
t1.price,
JustTheCount.DistCnt
from
table t1,
( select count(*) as DistCnt
from ( select distinct
t2.product,
t2.rating,
t2.maufacturer,
t2.price
from
table t2 )
) JustTheCount
In the following query, you're getting rows with distinct names since the DISTINCT clause precedes the name column:
SELECT DISTINCT name, product, rating, maufacturer, price FROM table
However, to get the count of the same records, use the following format:
SELECT COUNT(DISTINCT name) FROM table
Notice that DISTINCT goes inside of the COUNT function so that you're counting the distinct names. You probably don't want to include the other columns in the count query because they will be a random sample from the set. Of course, if you want a random sample, then include them.
Most applications will run the count query first, followed by the query to return the results. Also keep in mind that COUNT(*) is only an estimate, and the value may differ from the actual number of records returned.
SELECT DISTINCT COUNT(name), product FROM table isn't even a valid query in MySQL 4.x. You can't mix aggregate and non-aggregate columns. IN 5.x, it'll run, but the values for the non aggregate columns will be a random sample from the set.
At the risk of sparking some flames here.. you could always use:
SQL_CALC_FOUND_ROWS as the first part of your SQL. This is very mysql specific though.
http://dev.mysql.com/doc/refman/5.0/en/information-functions.html
mysql> SELECT SQL_CALC_FOUND_ROWS * FROM tbl_name
-> WHERE id > 100 LIMIT 10;
mysql> SELECT FOUND_ROWS();